Beli Mesin edge banding bekas (552)

Kondisi: bekas, Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 450 kg, jenis arus masuk: tiga fasa, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, – Italian-made – Year of manufacture: 2016 – Pre-milling – Technical documentation (DTR), CE certificate Pgedpfjwb Ha Tox Ab Isw TECHNICAL PARAMETERS: – Edge thickness: 0.5 – 3 mm – Solid wood edging: 0.5 – 5 mm – Workpiece height: 8 – 50 mm – Minimum edging length: 160 mm – Minimum panel width: 110 mm – Feed speed: 7 m/min – Pre-milling – Radius cutters – Edge trimming – Radius scraper – Straight scraper – Air blow-off on each unit – Working pressure: 8 bar – Working machine length: 2030 mm – Transport dimensions (L/W/H): 330 / 80 / 125 cm – Weight: 450 kg

Kondisi: sangat baik (bekas), 7814 Pgjdpfx Abjxxla Re Ijw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Zusätzliche Ausstattung Bedienfeld: Smartouch 21" Steuersystem: E-motion // Steuersystem mit motorischer Verstellung (Genauigkeit 0,01 mm) Kettenvorschubsystem: Mit automatischer Schmierung Oberer Andruckbalken: Motorische Höhenverstellung Vorfräseinheit: 2 x 2,2 kW Motoren, Diamantfräser, bis zu 3 mm Abtrag Leimauftragsystem: Für EVA- und PUR-Kleber geeignet, schnelle Aufheizung (8 min) Zusätzlicher Leimtank: Für schnellen Kleberwechsel Anpressstation: 1 angetriebene + 2 passive Rollen, pneumatische Steuerung Bündigfräseinheit: 2 Motoren (0,5 kW), verstellbar 0–15° Multi-Funktions-Fräseinheit: 2 Motoren, 0,75 kW, oben und unten Eckenrundungseinheit: Kantenstärke 0,4 – 3 mm, Plattenhöhe 10 – 60 mm, 2 unabhängige Motoren, 12.000 U/min Diese FORMAT4 Tempora F800 60.12/2 E Kantenanleimmaschine wurde 2022 gebaut. Sie verfügt über ein Smartouch 21" Bedienfeld, ein E-motion-Steuersystem sowie ein Kettenvorschubsystem mit automatischer Schmierung. Die Maschine ist ausgestattet mit einer Vorfräseinheit mit Diamantfräsern und einem Leimauftragsystem, das für EVA- und PUR-Kleber geeignet ist. Nutzen Sie die Gelegenheit, diese FORMAT4 Tempora F800 60.12/2 E Kantenanleimmaschine zu erwerben. Kontaktieren Sie uns für weitere Informationen. Anwendungsbereiche Psdpfxjxxduto Ab Iogw Kantenanleimen

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical data: Edge thickness, coil material: 0.4 - 3 mm (material-dependent) Edge thickness, strip material: 0.4 - 8 mm (material-dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: - Motorized pressure bridge adjustment - Extendable XL workpiece support, 600 mm spacing - 3-color LED entry light - Motorized adjustment of entry fence - Long entry fence, 1252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool correction - f.a.s.t = fast setting technology - ECO-Mode energy-saving mode - Preparation for RETURN connection (third-party equipment) - BS 501 guide system for square feeding of workpieces during edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm - Jointing unit FG201 with 2 milling heads, 64 mm height - Edge feed unit MG 301 - GluJet GJ 725 NC PUR PRO adhesive application system: - Automatic glue height adjustment via metering sleeve and sensor nozzle to compensate panel tolerances - NC axis for height adjustment - Swivels 90° for easy cleaning of gluing nozzle - Includes vacuum pump for professional PUR adhesive processing. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing the adhesive to remain in the system without curing. The vacuum pump operates independently of the machine’s main power supply and automatically compensates for any vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorized NC axis; 1st roller driven with pneumatic dipping control, 2 conical follow-up rollers - GM301 spraying system after pressure unit with lubricant for high-gloss edges - KA 501 pneumatic end trimming unit (60 mm) - Extraction hoods for trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 contour milling unit - ZK301 MOT4 scraper unit incl. high-gloss package - FK702 surface scraper - Complete spraying system for separating and cleaning agents - GM 301 spraying system after pressure unit (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in delivery. Availability: short-term Pgsdpfx Ajxymd Teb Isw Location: Hochheim

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Holzher Uno 1302, Tahun 2012, scraper datar, Berfungsi sepenuhnya, Dapat diuji coba. Pedpfxexz Icgj Ab Ijgw

Kondisi: baik (bekas), Tahun pembuatan: 2010, k0 Pjdpfxsxylpuo Ab Ijgw

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Pgedpfxsxyiilo Ab Isw Lokasi penyimpanan: Nattheim

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg Pgodpfslht Hwsx Ab Isw - Available in calendar week 4 -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, CEFLA ROCTRE W ini diproduksi pada tahun 2007. Mesin edgebander yang telah direkondisi sepenuhnya ini menawarkan performa stabil dan keandalan, siap digunakan segera. Dengan kekuatan struktur aslinya yang tetap terjaga, mesin ini ideal bagi Anda yang membutuhkan solusi siap pakai tanpa perlu restorasi lebih lanjut. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Edge Banding Pgedpfxexyayuj Ab Isw

Kondisi: bekas, Tahun pembuatan: 2003, Mesin bekas Tahun pembuatan: 2003 Perlengkapan dan data teknis: - Kontrol MAGELIS - Untuk lem leleh berbasis EVA - Penyambungan: 2x1,5 kW, u=12000, 200 Hz - Pemotong tutup: 2x0,2 kW, perputaran otomatis 0°/3°, 2 pisau gergaji HM 140 mm - Frais rata: 2,07 kW, dengan kepala WPL HF 70, diameter 70 mm - Frais radius: R2 Pgsdpfx Abexymfwe Iow - Pisau tarik radius - Pisau tarik permukaan - Tangki lem atas - Dimensi benda kerja: - Lebar min: 70 mm - Tebal: 8-42 mm - Panjang min: 150 mm - Ketebalan tepi: 0,2-6 mm - Feeding: 12 m/menit - Koneksi ekstraksi debu: 160 mm Dimensi: 4.500 x 1.250 x 1.300 mm Berat: 1.650 kg Ketersediaan: segera Lokasi gudang: Baden-Württemberg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, Mesin pelapis pinggir, Felder G330, Kondisi sangat baik, 2017/18, Jam kerja rendah, Pot lem Teflon, Sistem penyesuaian cepat, Pengikis datar untuk unit finishing. Pgodpsxz Ia Sefx Ab Isw

Kondisi: bekas, Lokasi gudang: Sonnefeld Pedpfsway Dcsx Ab Isgw

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. Podpfxji Am U Dj Ab Isgw F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: bekas, Tahun pembuatan: 2004, Used machine Year of manufacture: 2004 Equipped with pre-melter unit for hot-melt adhesive granulate Adhesive reservoir located below the glue roller Application of glue to the workpiece via adhesive roller, both in co-rotating and counter-rotating mode Automatic edge magazine for roll material and fixed lengths Pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compressing upper and lower glue joints Centrally adjustable upper pressure Central manual lubrication of chain track Control panel at machine infeed End trimming unit for front and rear edge overhang; highly precise linear guides 2 motors of 0.18 kW each Tilting range for straight and bevel trimming: 0–15 degrees Flush trimming unit top and bottom with vertical and horizontal tracing Tilting range 0–15 degrees with 2 milling motors with combination of straight/radius reversible knives Digital counters allow for quick and precise—i.e., repeatable—settings Two-point pneumatic adjustment of top and bottom milling motors Psdpfxjxya Rto Ab Iogw Scraper unit for finishing, with horizontal and vertical tracing Extendable workpiece support up to 350 mm Integrated control system for contactless management of processing functions. Adjustable via keypad and LED display Workpiece thickness: 8–50 mm Edge thickness: 0.4–3 mm Feed speed: approx. 9 m/min Connected load: 4.1 kW Compressed air connection: 6 bar Weight: approx. 750 kg Machine length: 3150 mm Availability: short-term Stock location: Flörsheim

Kondisi: bekas, Tahun pembuatan: 1994, Ketebalan pinggiran 0,3 - 20 mm Tinggi edging: maks. 66 mm Panjang edging: min. 200 mm Lebar benda kerja min. 60 mm Panjang benda kerja min. 140 mm Tebal benda kerja: min. 6 mm, maks. 60 mm Kecepatan makan 8 atau 16 m/menit - Pengeleman pinggiran dengan Ultra - Granupress - Pemotongan ujung dengan 2 gergaji, dapat diputar 0 - 15° - Milling, radius / rata - Penyalinan sudut - Scraper - Penggosokan pneumatik Lokasi: Nattheim Pjdpfjvvkdtex Ab Iegw

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Pgsdpelht Hzjfx Ab Iew

Kondisi: bekas, Tahun pembuatan: 1996, Ketebalan pinggiran: 0,4 - 12 mm Tepi gulungan: 3 x 45 mm atau 0,8 - 60 mm Lebar benda kerja minimum: 65 mm Panjang benda kerja minimum: 160 mm Ketebalan benda kerja: 10 - 55 mm Kecepatan maju: 13 m/menit Pramilling (penyambungan) Bak lem Quickmelt Unit pengelem Pemotongan Meratakan pinggiran Penyudutan pemotongan Perataan radius Penyalinan sudut Pisau penghalus rata Unit pemoles Dimensi mesin: 7450 x 1220 x 2400 mm Berat: 3000 kg Lokasi gudang: Nattheim Pedpfx Absvvkd To Iogw

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Pedpfx Abjhqadcs Ijgw Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing Pgsdpfxsvvkfde Ab Iow with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, E450PM - MESIN EDGE BANDING OTOMATIS V000047 LME450PM-5 dengan unit pemotong join Mesin dalam kondisi sangat baik TEGANGAN 400/50/3 Psdpfsxac Hwex Ab Iogw KONTROL DENGAN LAYAR SENTUH 7" UNIT PEREKAT YANG DAPAT DITUKAR VR - UNIT POTONG MULTIFUNGSI Alat untuk pemotongan lurus/melengkung KIT ALAT R=2 mm SCRAPER PERMUKAAN UNIT PEMISAH PENERANGAN LED INTERIOR DOKUMENTASI DALAM BAHASA JERMAN LAMPU INFRARED untuk pemanasan panel UNIT SCRAPER Lokasi: dari stok 54634 Bitburg - Tersedia segera -

Kondisi: bekas, Tahun pembuatan: 2001, Laitteen reunalistan ja kappaleen mitta- ja varustetiedot, varastopaikalla Nattheim. Psdpfx Abjvvkfqs Isgw

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Pgjdpei Am Ukofx Ab Iew Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: bekas, Tahun pembuatan: 2002, Panjang mesin: 6240 mm Berat: 2400 kg Daya terhubung: 14 kW Diameter hisap: 120 / 140 mm Lokasi penyimpanan: Nattheim Pgsdsvvkfwopfx Ab Iow

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Pjdpfx Aei Anadeb Iegw

Kondisi: bekas, Tahun pembuatan: 2006, Pelapisan EVA dengan 2 rol tekan, stasiun pemotongan, pra-frezer dan frezer pengebulatan, pisau tarik permukaan, perangkat penggerak. Lokasi penyimpanan: Nattheim Psdpfevvkg Iox Ab Isgw