Beli Mesin edge banding bekas (553)

Kondisi: bekas, Tahun pembuatan: 2011, Mesin bekas Tahun pembuatan: 2011 Podpfjwka N Tex Ab Iegw Kondisi: Mesin telah direkondisi dan dirawat sepenuhnya Perlengkapan dan data teknis: Kecepatan umpan stepless 10-18 m/menit Kontrol Edge Control 19 dengan layar sentuh warna 18,5" Unit penghalusan pinggiran Sistem pemberian tepi otomatis Stasiun aplikasi lem dengan patron, nosel sensor penyesuaian tinggi lem otomatis Unit penekan Unit pemotong Unit milling multifungsi Unit copy milling Unit scraper radius Unit scraper permukaan Unit pemoles Tebal benda kerja: 6 - 60 mm Tebal pinggiran: 0,4 - 8 mm Lebar benda kerja minimum: 60 mm Panjang benda kerja minimum: 180 mm Dimensi: 5300x1500x1600 mm Berat: 2200 kg Lokasi: 65439 Flörsheim Ketersediaan: segera

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 1000065502, Mesin edge banding satu sisi model Stream B 9.5 untuk pelapisan tepi panel. Mesin ini baru, belum pernah digunakan, awalnya ditujukan untuk pelanggan yang akhirnya tidak jadi mengambil karena masalah keuangan. Komposisi: perata, unit pengeleman dengan SISTEM GANDA PERGANTIAN WARNA LEM EVA, 6 gulungan edging, pemotong ujung, perata kasar, finisher, pembulat kelompok cutter, pisau pengikis edging, pengikis lem, sikat, berbagai cairan anti-rembes dan pembersih. LIHAT LAMPIRAN. Pgodpfsxyf Nzsx Ab Isw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 15 h, Edge banding machine FORMAT 4 Tempora F600 / 60.06 ELX - as new condition - only briefly in use, now for sale due to production shutdown Pgsdswq A Ewopfx Ab Iow - available immediately

Kondisi: bekas, Holz Her STREAMER 1054 FÜ + PU Edge thickness 0.4 - 6 mm Modern control system with selector switch for unit adjustment Pre-milling unit for pre-milling before gluing station Fully automatic edge magazine for roll and strip material GLU-JET cartridge adhesive application station + PU bonding Pjdsxu E Nwspfx Ab Iogw Adhesive application by nozzle technology Workpiece height 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic switchover from 0-10° inclination for end saws Pneumatic milling unit, flush trimming up to 6 mm, radius milling - chamfer milling - 15°, programmable via control panel Scraper unit for chamfers and radii with 2 scraper holders Pneumatic infeed and outfeed Flat scraper unit - finish Spray device - PU Machine is FACTORY-REFURBISHED and in TOP CONDITION

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 45 mm, lebar total: 1.402 mm, ketebalan tepi (maks.): 6 mm, tinggi total: 1.565 mm, berat keseluruhan: 850 kg, jenis arus masuk: tiga fasa, sambungan udara terkompresi: 6 batang, tegangan masuk: 400 V, diameter nosel ekstraksi: 70 mm, frekuensi input: 50 Hz, diameter sambungan ekstraksi: 70 mm, sambungan pneumatik: 6 batang, tinggi produk (maks.): 45 mm, tekanan: 6 batang, tekanan kerja: 6 batang, de-2024-holz-her-sprint-1310-kantenanleimmaschine Psdpsxyuqbefx Ab Isgw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Brandt KDF 110 Optimat Ambition – only 1,150 operating hours Manufacturer: Brandt Model: KDF 110 Year of Manufacture: 2012 Machine No.: 0-261-20-6960 Control: Easy Control 10+ Contactless track control, feed-rate regulated, with start-stop optic-indicative sensors Display: LCD, 4 x 20 characters, 4 program memory slots Configuration: - Chain Feed Track: Standard equipment with central lubrication for transport chain - Upper Pressure Rollers/Product Guide: Central control, 2 roller tracks - Jointing Unit: 2 x 0.75 kW, 200 Hz; includes DIA jointing cutter set, manual positioning via Siko counter, max. 3 mm removal and max. 40 mm workpiece thickness - Gluing Unit: A3 gluing unit for hotmelt glue, with option for PU application, magazine, pressure zone with electro-pneumatic 2-point positioning via central control - Pressure Zone: 1 powered roller and 2 idle rollers for optimal and consistent compaction - End Trimming Unit: 0.18 kW, 12,000 rpm - Milling Unit: 2 x 0.27 kW, 200 Hz, 12,000 rpm, counter-rotating, 3-position adjustment for chamfer/radius (R2), overlap, and straight; max. 3 mm edge thickness with Siko counter - Profile Scraper: Max. 3 mm edge thickness - Surface Scraper: Reversible knives Chain width: 80 mm Edgebanding material (roll): 0.4 – 3 mm End trimming device: 0.4 – 3.0 mm Edge height: max. workpiece height + 5 mm Workpiece thickness: 8 – 40 mm Min. workpiece width: 70 mm for 8-22 mm thickness; 120 mm for 23-40 mm thickness (depending on workpiece length) Workpiece overhang: 38 mm Edge cross-section: max. for PVC 135 mm² (max. 6 mm) Roll diameter: max. 830 mm Feed speed: 8 m/min Working height: 950 mm Pneumatic connection: min. 6 bar Total length: 3,672 mm Psdpfexvirfox Ab Iegw Location: ex stock 54634 Bitburg - immediately available -

Kondisi: sangat baik (bekas), Mesin edging SCM Casadei Flex 17 seperti SCM K100 Pgodpfx Abjxxlune Iew Pisau frais awal, Pemasangan lem dengan rol, Gilotin pneumatik awal, Rol penekan, Gergaji potong finishing, Unit frais atas-bawah R1 – R2, Siklin rata, Panjang mesin 320 cm, Kecepatan makan 7 m/menit, Tinggi maksimal elemen 50 mm, Ketebalan tepi maksimal 3 mm, Mesin bekas, kondisi sangat baik. Jumlah pemakaian hanya 15.250 meter. Bisa dicek sebelum membeli.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, unit penggilingan awal stasiun lem untuk butiran gilotin pneumatik untuk pemotongan awal pisau gergaji untuk pemotongan presisi ujung panel unit penggilingan dengan pisau profil unit penggilingan sudut unit pengikis profil unit pengikis lurus Pgsdpfxsxw T Tie Ab Isw panjang mesin 4500 mm Tahun produksi: 2013 Jarak tempuh – 87.026 meter

Kondisi: diremaj di bengkel (bekas), Mesin edging bekas rekondisi BRANDT AMBITION 1440 Podpew S E Rqsfx Ab Iegw

Kondisi: bekas, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty design – edge thickness 0.4 - 5 mm PLC touchscreen control Large LCD display Pre-milling unit for edge preparation before gluing section Fully automatic edge magazine for rolls and strips Adhesive application unit for cartridge and PUR bonding Pedpfxexuhpae Ab Ijgw Maximum edge height: 51 mm automatic glue height adjustment Pressure unit 1913, motorized and pneumatic End trimming unit for rolls and strips With pneumatic adjustment of 0-10° tilt for trimming saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for machining different radii – chamfers – flush trimming via PLC Corner copying unit 1832 for corner rounding up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfer and radius Pneumatic engagement/disengagement Finish surface scraper Regularly serviced by Holz Her Machine is FACTORY SERVICED and in TOP CONDITION Available from stock Lieboch

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, panjang total: 5.250 mm, tinggi benda kerja (maks.): 40 mm, lebar total: 1.445 mm, ketebalan tepi (maks.): 12 mm, tinggi total: 1.600 mm, berat keseluruhan: 1.550 kg, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, daya: 12 kW (16,32 hp), frekuensi input: 50 Hz, tinggi produk (maks.): 40 mm, de Pjdpjxyt D Hofx Ab Ijgw

Kondisi: baru, kecepatan pemakanan sumbu X: 7 m/menit, tinggi benda kerja (maks.): 50 mm, jenis arus masuk: tiga fasa, tegangan masuk: 400 V, With corner copying, suitable for plastic edges from 0.4 to 3 mm, solid wood edges up to 3 mm, and workpieces from 8 to 50 mm, with pneumatic adjustment Panel thickness: 8 – 50 mm Edge thickness: 0.4–3 mm (coil material) Jointing: Yes Radius milling unit: Yes Corner copying unit: Yes Scraper: Yes Buffing unit: Yes Top-spec configuration for high productivity in a compact footprint! Intuitive operation via eye-S control and large 10" touchscreen: HMI Maestro Active Edge; graphical display of all processing units and their operating status; graphical simulation of machining operations; control of all processing units; regulation of the glue pot temperature; assistant functions for machine setup according to the machining program; error diagnosis for quick resolution of simple faults; statistics of processing parameters; USB connection; prepared for network connection; prepared for Industry 4.0 with API REST data transfer protocol Outstanding accessibility to the working units thanks to the large hood, providing protection and noise reduction Monoblock steel frame construction ensures high stability and rigidity Automatic unit positioning when changing panel thickness Trimming and corner rounding unit (me 35 tr s): for trimming the edge as well as rounding corners on the top and bottom; for edging of solid wood edges, trimming is done by the radius cutter; high-frequency motor with 12,000 rpm; saw blade Ø125mm Z12 Panel feed via feed chain with rubber glide pads Extendable workpiece support Infeed fence adjustment via spacer plates Dimensions and weights Length (product): approx. 3314mm Width/depth (product): approx. 1085mm Height (product): approx. 1300mm Weight (net): approx. 623kg Flush radius milling unit Power consumption: 2 x 0.35kW Cutter diameter: HM 55.3mm Cutter speed: 12,000 rpm Extraction connection diameter: 60mm Pgjdpfxoxxvano Ab Iew Number of extraction ports: 2 Corner copying unit Power consumption: 0.35kW Tool diameter: 58mm Speed: 12,000 rpm Electrical data Operating voltage: 400V Frequency: 50Hz Glue unit Glue pot power consumption: 0.25kW Glue pot operating temperature: 190°C Glue pot extraction port diameter: 60mm Glue pot capacity: 0.8kg Pneumatic connection Operating pressure: 6.5 bar Air consumption: 470 l/min Feed Feed power consumption: 0.55kW Feed speed: 7m/min Edges Edge thickness (coil material): 0.4–3.0mm Pre-milling unit Extraction connection Ø: 2 x 80mm Power consumption: 3kW Cutter speed: 7,200 rpm Diamond cutter Ø: 80mm Cutter height: 56mm Material removal: 0.5 / 1 / 1.5 / 2mm Scraper units Radius scraper: 2mm Buffing unit Power consumption: 2 x 0.14kW Speed: 2,800 rpm Workpiece Workpiece thickness: 8–50mm Minimum workpiece length: 120mm Minimum workpiece width: 110mm

Kondisi: sangat baik (bekas), Edge bander Biesse Stream 5.5 A Jarak tempuh: 246.000 m Penekan material dari atas dengan sabuk, Cairan Freis prapemotongan, Aplikasi lem, Pre-melter untuk lem PUR Tangki memiliki pembuangan lem Gilotin pra-pemotongan pneumatik, Rol penekan Cairan Pisau pemotong akhir, Unit frais atas-bawah dengan mata frais lurus Unit frais atas-bawah (multi mata frais) Dua unit radius sudut Cairan Cyklina profil (multi R1-R2), Cairan pembersih Cyklina datar, Polisher, Mesin ini dilengkapi kontrol NC untuk kepala frais serta paket pneumatik, Maks. tinggi benda kerja 60mm, Maks. tebal edging dalam rol 3mm, Kecepatan maju 12, 18 dan max 20 m/menit Pedpfoxxlqvox Ab Iogw Mesin dalam kondisi sangat baik.

Kondisi: belum diuji (bekas), Tahun pembuatan: 2021, Mesin pembanding tepian semi-otomatis Holzmann. Mesin bekas, namun tidak pernah digunakan secara intensif. Dibeli untuk lini produk yang tidak jadi diluncurkan, hanya digunakan untuk prototipe, kemungkinan kurang dari 100 jam waktu operasi total. Pgedpfxjxgug Ae Ab Ijw

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, IMA Combima Systems/I/R75/1370 edgebander ini diproduksi pada tahun 2006. Mesin ini dapat menangani benda kerja dengan panjang antara 250 hingga 2800 mm dan lebar 115 hingga 1300 mm, dengan ketebalan hingga 40 mm. Dirancang untuk material seperti papan partikel dan MDF, mesin ini dilengkapi dengan aplikasi lem hot melt dan sistem pengumpan tepian servo. Sangat cocok untuk proses pengeleman tepi berkualitas tinggi, pertimbangkan kesempatan untuk membeli IMA Combima Systems/I/R75/1370 edgebander ini. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Pedpfx Aboxuw Daj Ijgw Jenis Aplikasi Pengeleman Tepi

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 540 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0261973988, Perlengkapan: ABS, Pelat tipe tersedia, pl-hu-001 Pedsxw Nwkopfx Ab Ijgw

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: 0-600-44-2301, HOMAG - Profi KAL310/7/A3 Terdiri dari: - Meja pengumpan Profi TBL100/20/06 (HOMAG, Tahun 2014) - Profi KAL310/7/A3 (HOMAG, Tahun 2014) Podpfx Ajqi Hqijb Isgw KAL cocok untuk pengerjaan papan kayu berlapis: - dengan edging melamin 0,3-0,4 mm - dengan edging ABS dan PP 1,0-2,0 mm (Tersedia alat: R 1,0 1,5 2,0) Mesin juga dilengkapi satuan pembuatan alur untuk grooving dan rabbeting secara vertikal dan horizontal. Konfirmasi pesanan lengkap dapat dikirimkan jika diminati. Pembongkaran dan pemuatan mesin menjadi tanggung jawab pembeli sendiri.

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, panjang total: 3.774 mm, ketebalan tepi (maks.): 3 mm, berat keseluruhan: 842 kg, tinggi pelat: 50 mm, For plastic edges from 0.4 to 3 mm, solid wood edges up to 5 mm, and workpieces from 8 to 50 mm Panel thickness: 8 – 50 mm Edge thickness: 0.4–3 mm (coil material) Jointing unit: Yes Radius milling unit: Yes Scraper: Yes Buffing unit: Yes Top features for high productivity with minimal space requirements! Intuitive operation with eye-S control and a 10” touchscreen: HMI Maestro Active Edge Graphical display of all processing units and their operating status Graphical simulation of processing operations Control of all machining units Regulation of glue pot temperature Assistance functions for machine setup according to the processing program Error diagnostics for quick resolution of simple faults Statistics on processing parameters USB connection Prepared for network connection Excellent accessibility to working units thanks to the large hood, providing protection and noise reduction Automatic adjustment of unit positions when changing panel thickness Panel feed via feed chain with rubber sliding shoes Quality Made in Italy Equipment details 10" touchscreen control panel Optimal machine management with the new 10" touchscreen control panel featuring Maestro active edge, displaying all machine functions graphically Pre-milling unit Two DIA cutters Glue station The glue is quickly and evenly heated by heating rods located in both the glue pot and the glue application roller Automatic temperature reduction during extended machine idle times Teflon-coated glue pot for easy glue change Device for recycling unused glue Pgjdpfx Abjxxuvbo Isw Automatic application of coil edges with guillotine for edges up to 3 mm 730 mm diameter turntable Self-lubrication of the glue pot Quick-change kit for the glue pot Flush/radius milling unit With tracing rollers in horizontal and vertical directions for optimal tool positioning Equipped with a combination milling tool Ø 55.3 mm for flush milling of edges up to 5 mm and radius edges up to 2 mm Precise adjustment via two digital readouts With chip extraction Flat scraper Absolute cleanliness for a perfect finish on the surfaces of the workpiece With rotating copying device Buffing unit Powered by two independent, swiveling, and height-adjustable motors For perfect cleaning and polishing of the panel edges Radius scraper With digital position indicator For perfect finishing of plastic edges With device for retracting the unit when not needed Edge magazine For automatic application of strip edges Solid wood strip edges are automatically loaded and synchronized with the panel feed

Kondisi: bekas, Edge bander Hebrock AKV 3005, peralatan lengkap, dapat diuji sebelum pembelian, Cairan sebelum pisau penggilingan, Pisau penggilingan awal, Aplikasi lem dengan rol, dilengkapi pembuangan lem, Panci lem kedua termasuk, Gunting pneumatik awal, Roll penekan, Gergaji potong akhir, Unit penggilingan atas-bawah, R1 – R2 dapat disetel secara pneumatik, Pgedpfx Asw I Sp Sjb Ijw Pisau siklin profil, Unit pembentukan sudut, Cairan sebelum pisau siklin, Pisau siklin datar, Polisher, Maks. tebal edging roll 3mm, Maks. tebal edging lem 12mm, mesin dalam kondisi sangat baik.

Kondisi: bekas, Tahun pembuatan: 2017, nomor mesin/kendaraan: MR005128, Bekas pakai ringan: Mesin edge banding dengan unit lem, unit pemotong ujung, dan unit frais rata. Mesin ini cocok untuk edging band hingga ketebalan 2 mm dan panel hingga ketebalan 50 mm. Spesifikasi teknis: - Ketebalan edging band minimal: 0,4 mm - Ketebalan edging band maksimal: 2 mm - Ketebalan panel minimal: 12 mm - Ketebalan panel maksimal: 50 mm - Panjang panel minimal: 180 mm - Lebar panel minimal: 65 mm - Kecepatan feeding: 6 m/menit Pgodsxxx Dijpfx Ab Iow - Volume reservoir lem: 0,5 kg - Unit pre-milling: Tidak ada - Unit pemotong potong: Pisau kap - Nomor seri: KK /138932

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, Tipe: Mesin Edge Bander Satu Sisi Pabrikan: BRANDT Model: Optimat KDF 550 C Tahun: 2008 Lokasi: Lituania Ketentuan: apa adanya di lokasi Ketebalan papan: 60 mm Ketebalan edge: 8 mm Kecepatan feed: 11 m/menit Pedpfxjxwwb Rs Ab Ijgw Dimensi (P x L x T): 5860,0 × 1560,0 × 230,0 mm Bobot: 2600 kg Kecepatan feed: 11 m/menit Ketebalan benda kerja: 8 – 60 mm / ketebalan edge: 0,4 – 8 mm / tinggi kerja: 950 mm Catu daya listrik: 400 V – 3 fase – 50 Hz / tekanan pneumatik: 6 bar / tingkat kebisingan: 80…87 dB(A) Diameter ekstraksi: 1 × 120 mm / 2 × 100 mm / jarak antar rol: maks. 3.0 × 45 mm / 0.8 × 65 mm

Kondisi: baik (bekas), Tahun pembuatan: 2006, • Glue pot • Conversion: carried out by Hüttenhölscher GmbH in Verl • Application area: adhesive application unit for handle rails • Vacuum table: included Pedjibdyqspfx Ab Iogw • Automatic pressure zone: included

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Well-equipped, available for inspection before purchase. Pre-milling cutters Pgsdpfxet Hxxpo Ab Iew Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: bekas, Tahun pembuatan: 1997, - Edge banding unit - Cross-cutting unit - Milling unit - Fine milling unit - Scraper Pgedpfxsd Inkto Ab Ijw - Buffing unit

Kondisi: sangat baik (bekas), Mesin Laminasi Tepi Artech Akron 420 Pedpfx Abexw Uzzj Iegw Aplikasi lem dengan rol, Guillotine awal pneumatik, Roll penekan, Gergaji potong akhir, Unit frais R1, R2, Siklin profil, Kondisi sangat baik