Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 35 + 70 m/min Total connected load: 1.1 / 1.3 kW Machine weight approx. 0.35 t Space requirement approx. 1.3 x 0.8 x 1.5 m Csdpfxsd Iip Nj Adpehc SPECIAL OFFER PRICE!!! Double mitre metal band saw featuring: - Blade speed 35 + 70 m/min - Mitre cuts up to 60° left and 45° right - Ball-bearing mounted rotary table for quick mitre adjustment - Quick-release vice, movable - Quick-action clamping lever - Automatic coolant system

Kondisi: baru, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Blade speed: 35 + 70 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.42 t Space requirements: approx. 1.23 x 1.7 x 1.75 m Double mitre metal bandsaw, GBS 250 Super AutoCut (20413) - Mitre cuts up to 60° to the left and 45° to the right Cedpfx Aourc S Rsdpehc - Ball-bearing rotary table - Quick-release vice - Solid, large material support - Automatic coolant system

Kondisi: baru, Translation into English: Cutting range at 90°: round 255 mm Cutting range at 90°: square 240 mm Cutting range at 90°: rectangular 300 x 180 mm Saw blade length 2,765 x 27 x 0.9 mm Table height 870 mm Blade speed 18 - 110 m/min Total connected load 1.5/1.8 kW Machine weight approx. 0.63 t Space requirements approx. 1.8 x 1.85 x 1.85 m Mitre Bandsaw, Fully Automatic GBS 250 Super VA-I MPS • Mitre cutting left 45° automatic operation • Mitre cutting left 60° semi-automatic operation (cuts without programming) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover a. • Material height sensor c. (automatic cut start detection) • Frame and gearbox cast in one piece, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Top accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! Chodjd Iip Aopfx Adpec Automatic sawing via microprocessor control Adjustable for two program levels: Semi-automatic mode Fully automatic mode Start upon entering the desired quantity and length: Material trimming, execution of cutting and piece counting until program completion • MPS control for input of desired feed quantity • LED display shows all important machine data during the cutting process (current draw, cutting time, piece count) • Input data are stored in RAM memory • Self-diagnostic circuitry automatically displays all irregularities as error messages and monitors the complete process • Feed unit mounted on floating bearings • Length setting via handwheel and vernier scale with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable by reverse automation 1 - 29 times, minimum residual piece length 210 mm

Kondisi: baru, Cutting capacity at 90 degrees: round 172 mm Codpfx Aofgyhzedpshc Cutting capacity at 90 degrees: square 170 mm Cutting capacity at 90 degrees: rectangular 170 x 170 mm Saw blade dimensions: 2035 x 20 x 0.9 mm Dimensions (L x W x H): 430 x 960 x 520 mm Blade speed: 30 - 80 m/min Total power requirement: 1.5 kW Machine weight approx. 38 kg SPECIAL OFFER PRICE!! Berg & Schmid - Portable Bandsaw PBS 171 ESC Powerful and particularly robust metal bandsaw with aluminium die-cast saw table and infinitely variable cutting speed for mitre cuts up to 60° Optional: Machine stand type 20508

Kondisi: baru, Cutting capacity at 90°: round 680 mm Cutting capacity at 90°: square 640 mm Cutting capacity at 90°: rectangular 820 x 610 mm Cutting capacity at 45°: round 550 mm Cutting capacity at 45°: square 550 mm Cutting capacity at 45°: flat 550 x 600 mm Cutting capacity at 60°: round 370 mm Cutting capacity at 60°: square 370 mm Cutting capacity at 60°: flat 370 x 600/450 mm Saw blade length: 7260 x 41 x 1.3 mm Blade speed: 15 - 100 m/min Table height: 800 mm Total power requirement: 5.5 kW Machine weight approx. 4.8 t Space requirement approx. 5.85 x 3.7 x 2.7 m 2-column double mitre band saw for fast cutting, equipped with Pusher System P15. Option P30 available. Hydraulic saw frame descent - NC controlled - Automatic angle positioning from +60° to -60° High-quality automatic mitre adjustment Specially developed for cutting profiles and beams. Highest positioning accuracy is achieved by the new "B&S Positioning System". An intelligent NC control ensures smooth coordination between linear encoder and self-locking positioning motor in combination with a reliable hydraulic brake using large-radial central positioning. The work table is mounted on high-quality preloaded bearings, which guarantee exceptionally smooth rotation. CNC control The CNC controller allows programming of up to 90 cutting programs with different cut lengths, quantities, and mitre angles. Gripping positioner on both sides The B&S pusher system, infeed and positioning system, is equipped with "double-sided grasping clamps" controlled hydraulically. This Csdpfx Asfg E Hmodpjhc ensures secure gripping and transport of materials and bundles that may deviate slightly from ideal shape. The pusher system is built separately and is guided by ball-bearing linear guides, a precision ground rack, and a robust, frequency-driven gear motor.

Kondisi: baru, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Cutting diameter flat: 460 x 460 mm Saw blade length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL PRICE OFFER!!!! 2-Column High-Performance Bandsawing Machines of the SBS Series The SBS series stands out due to its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 control system for CNC models - Frequency-controlled saw drive - Control panel with pictogram buttons - Work light - Powered chip brush - Hydraulic blade tensioning - Adjustable clamping pressure - Double vice (before and after the blade) - Crawl mode for positioning - Electrically and hydraulically pre-configured bundle clamping Chsdpfxefg E Hve Adpsc - Chip conveyor The SNC 20 control system allows for easy and straightforward input of up to 20 different sawing tasks (length and quantity). When entering the desired measurements, the control automatically calculates the cutting waste and the number of feed strokes. In addition, the error code display system provides quick fault analysis and troubleshooting.

Kondisi: baru, Cutting diameter 300 mm Saw band length 3320 x 27 x 0.9 mm Cutting width 300 mm Control NC Cutting range at 90 degrees: flat 330 x 260 mm Cutting range at 90 degrees: square 260 x 260 mm Cutting range at 45 degrees: square 250 mm Cutting range at 45 degrees: flat 270 x 200 mm Cutting range at 60 degrees: round 180 mm Cutting range at 60 degrees: square 170 mm Band speed 15 - 100 m/min Total power requirement 2.2 kW Machine weight approx. 1.1 t Space requirements approx. 3.3 x 2.83 x 2.23 m Equipment: Csdpfxofg E H Es Adpehc - Electrohydraulic fully automatic bandsaw with additional semi-automatic, semi-automatic dynamic, and manual operation - Automatic cycle (cuts from 0° to 60° left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows for direct cuts outside of series production, without programming - Numerically controlled bandsaw machines, featuring the new Windows CE-based controller developed by MEP specifically for automatic machines - User interface with 7" touch screen display and mechanical buttons for machine operating functions - Infinitely variable cutting speed adjustable from 15 to 100 m/min via frequency inverter - Material feed with stepper motor and ball screw - mounted on counter-opposed ball bearings; single stroke 600 mm - Repeatable for any length required - Automatic monitoring of cutting load - via a servo valve mounted directly on the cylinder - Coolant tray integrated into the machine base - Swarf removal brush - Bi-metal saw blade for solid and profile materials - Tools and operating manual including spare parts list

Kondisi: baru, Cutting diameter: 250 mm Band saw blade length: 2950x27x0.9 mm Table height: mm Band speed: 36/72 m/min Total power requirement: 1.8 kW Machine weight: approx. 440 kg Required space: approx. m Chodpfofg E H Nox Adpoc Absolute special price!! EUR 7,170 (Current price from 2024 is EUR 9,425) Standard equipment: - Vice with quick adjustment and adjustable guide strips - Hydraulic blade tensioning device with tension pressure indicator - Base frame with removable coolant tray - Chip removal brush - Pre-set precision stops for cuts at: 0°, 45°, and 60° left, and 45° right - Swivel table for double miter cuts - Electric coolant system 48 V (Option to fit a micro-spray device)

Kondisi: baru, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Band Sawing Machines of the SBS Series The SBS series stands out due to its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. - Modern SNC 20 control system for CNC versions - Frequency-controlled saw drive Chjdpfx Adjfb Nbgjpec - Control buttons with pictograms - Work light - Powered chip brush - Hydraulic band tensioning - Adjustable clamping pressure - Double vise (before and after the band) - Inch mode for positioning - Electrical and hydraulic bundle clamping prepared - Chip conveyor The SNC 20 control system allows for easy and convenient input of up to 20 different sawing tasks (length and quantity). When entering the target dimension, the control automatically calculates the cut-off and the number of feed movements. In addition, the error code display system enables rapid fault analysis for troubleshooting.

Kondisi: baru, Cutting capacity at 90 degrees (round): 130 mm Cutting capacity at 90 degrees (square): 127 x 127 mm Saw blade dimensions: 1140 x 13 x 0.65 mm Maximum blade speed: 144 m/min Total power requirement: 1.1 kW Machine weight: approx. 15 kg Dimensions (L x W x H): 500 x 300 x 400 mm Portable and detachable metal bandsaw Features: High performance with 1100 Watts. Includes 2 saw blades, worktable, and integrated LED lighting. With adjustable variable handle. Lightweight and easy to handle. Chjdpfeupw N Esx Adpec Suitable for versatile jobs in the workshop, on construction sites, or for private use.

Kondisi: baru, Cutting range at 90°: round 305 mm Cutting range at 90°: square 260 mm Cutting range at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 – 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirements approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made in one casting, exceptionally quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent access to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cutting! • CNC control for optimized workflows Entry of various parameters such as quantities and material lengths, automatic groove calculation • CNC control for 10 different sawing programs with 99 sub-programs for various lengths and quantities, e.g. 1 sawing program with multiple section lengths • Automatic feed unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm. Chodoupw R Aspfx Adpjc Includes: - Micro-spray device - Leveling elements

Kondisi: baru, Cutting capacity at 90 degrees: round 240 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 165 x 310 mm Saw blade length: 2725 x 27 x 0.9 mm Chodpfjhpktvjx Adpsc Table height: 890 mm Blade speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Coolant pump - Eccentric vice - Base frame - Saw blade - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double-mitre metal band saw, hydraulic semi-automatic, equipped with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure feed regulator - Blade speed 25 - 90 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release vice, movable Chjdpefgyh Sefx Adpec - Quick-action lever - Automatic coolant system

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m Chsdpfsfg E Hpox Adpec The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Cutting diameter round: 550 mm Cutting diameter square: 550 mm Cutting diameter flat: 550 x 550 mm Saw blade length: 5980 x 41 x 1.3 mm Table height: 800 mm Blade speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.8 t Dimensions (L x W x H): 3.0 x 2.15 x 2.2 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Machines of the SBS Series The SBS series impresses with its advanced technology, high quality, durability, and an unrivaled comprehensive standard equipment package. • Modern SNC 20 control system for CNC versions • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) Cjdpfx Adsfg E Hwopehc • Inch mode for positioning • Bundle clamping electrically and hydraulically pre-installed • Chip conveyor The SNC 20 control system enables convenient and uncomplicated input of up to 20 different sawing jobs (length and quantity). Once the desired dimension is entered, the control system automatically calculates the kerf and the number of feed cycles. Additionally, the error code display system enables rapid fault analysis and troubleshooting.

Kondisi: baru, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Table height: mm Band speed: 15 - 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t Dimensions (L x W x H): m SHARK 230-1 NC HS 5.0, electrohydraulic dual-column fully automatic bandsaw with semi-automatic function for 0° cuts in structural steel, stainless steel, steel alloys, solid and profile material, with a maximum remnant piece length of 60 mm. Cjdsfg E Hyepfx Adpjhc - Maximum cross-section: 230 x 230 mm. - Numerically controlled bandsaw machines featuring the new Windows "CE" based IGE developed specifically by MEP for automatic operation FEATURES: - User interface with 7" touchscreen display and mechanical buttons for machine operating functions, ensuring reliable operation, ease of use, and intuitive real-time monitoring of all cutting parameters. - Safety enclosure designed in accordance with the latest Machinery Directive EN 13898/2007 safety standards. - New fieldbus communication system with dual microprocessor and serial connection. - Sturdy cast iron structure (G25) for vibration compensation, enhanced machine stability, and reduced saw blade wear.

Kondisi: baru, Schnitt area at 90 degrees: round 310 mm Cutting area at 90 degrees: square 280 mm Cutting area at 90 degrees: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirements: approx. 1.5 x 1.78 x 1.3 m SPECIAL OFFER PRICE!!! Double mitre bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy - Mitre left 60° / right 45° - Industrial hydraulics, powerful 18 bar - Best material access - Ammeter for monitoring: - Cutting force optimization - Blade life - Cutting performance - Hydraulic vice opens/closes - Chip cleaning brush - Material turntable with ball bearings - Quick-release vice, movable Codod Iiptjpfx Adpohc - Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or, for serial cuts, begins cutting immediately 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Kondisi: baru, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade dimensions 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Csdenq Sanepfx Adpjhc Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Maximum round cutting diameter 310 mm Maximum square cutting diameter 310 mm Maximum flat cutting diameter 340 x 310 mm Saw band dimensions 3730 x 34 x 1.1 mm Table height 922 mm Band speed 15 - 100 m/min Total power requirement 3.0 kW Machine weight approx. 1.65 t Dimensions L x W x H 1950 x 1755 mm Cjdjvn Uy Ajpfx Adpehc 2-Column Bandsaw X-Smart 3 • Modern CNC control, freely programmable for multiple cutting jobs with various cut lengths and quantities • Saw frame angled for maximum blade life • 2-column structure for dual-sided linear guidance • Linearly guided sensor for automatic cut height detection • Hydraulic clamping pressure reduction (optional) for thin-walled tubes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge design for optimal material transport, feed, and clamping • Feed unit with precision ball screw spindle • Double vice before and after the saw blade • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full enclosure with easy access for maintenance and cleaning • LED work light • Minimum remnant length of 50 mm • Bundle clamping device (optional)

Kondisi: baru, Cutting diameter: 185 mm Chsdpfohpktrjx Adpoc Saw band length: 2,085 x 20 x 0.90 mm Table height: 915 mm Band speed: 35/70 m/min Cutting capacity at 90°: round 185 mm Cutting capacity at 90°: square 150 mm Cutting capacity at 90°: flat 220 x 150 mm Connected load: 400 V Total power requirement: 0.8 kW Machine weight: approx. 195 kg Space requirement: approx. 550 x 1,280 x 1,740 mm Metal band saw with stepless electronic speed control and automatic descent. • Selector switch for hydraulically controlled or manual band arm descent • Saw arm swivels up to 60° to the right • Quick-action vice • Band guide with 8 ball bearings • Hydraulic saw band tensioning with tension pressure indicator and blade breakage shut-off • Including coolant system • Including machine base cabinet

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) Cedpfx Aod Iipmjdpohc • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: baru, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangle 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 / 1.3 kW Machine weight: approx. 0.35 t Space required: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy mitre adjustment - Quick-release, movable vice - Quick-release lever - Automatic coolant system Shipping cost share: €120 Cheded Iip Rspfx Adpsc

Kondisi: baru, Cutting diameter: 250 mm Saw band dimensions: 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.37 t Chsdpfx Adefg E H Iopec Space required approx. ... m MEP Sawing Machine: Saw bow, vice assembly, and base made from robust cast iron Precision angle markings on the cast iron frame Electrical system (with fully identifiable wiring and 24 V low voltage circuit) Control handle IP 55 for manual cycles (if available) Rotating cleaning brush for the saw band Quick-clamping assembly with vice for rapid positioning Accurate end stops with adjustment for mitre cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, operating instructions, and spare parts ordering guides in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual operation and automatic cutting via gravity-fed head advance. CCS (Cut Control System) with (A) switch for manual and automatic cutting – (B) speed adjustment – (C) hydraulic brake with reservoir – (D) end stop for halting the blade, also available as retrofit for existing machines. Quick-clamping vice Hydraulic tension display for blade tensioning Electric coolant pump for lubrication and cooling of the saw band, with accessible coolant tray located above the base frame For versions with pneumatic vice (MA), the opening and closing is operated by a manual valve (optionally available with foot pedal control).

Kondisi: baru, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band length: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Codpsfm T Hbofx Adpehc Machine weight approx.: 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys, up to a maximum of 350 x 350 mm. Standard equipment includes: - Powered chip conveyor, can be mounted on the right or left side of the machine - Vise clamping pressure regulation - Feed with vertical rollers for lateral material support - Sensors for material detection at the start - Clamping pressure regulation - Storage for up to 300 programs - The machine is available with either a 34 mm or 41 mm blade at no extra cost Price on request.

Kondisi: baru, Cutting range at 90°: round 510 mm Cutting range at 90°: square 480 mm Cutting range at 90°: rectangular 610 x 450 mm Saw band length 5320 x 34 x 1.1 mm Band speed 15 - 100 m/min Table height 820 mm Total power requirement 3.0 kW Machine weight approx. 2.3 t Space requirement approx. 2.65 x 2.8 x 2.2 m For miter cuts up to 45° to the left in fully automatic operation and up to 60° to the left in semi-automatic operation. Material height sensor (automatic cut start detection) Automatic feed unit with ball screw incremental feed and automatic length compensation Sensor on saw band for automatic adjustment of saw stroke Fully automatic control of saw frame and clamping device Hydraulic unit with automatic pressure shut-off in idle mode Mechanical chip removal brush, feed vice opens on both sides Remnant piece length 100 mm Modern CNC control, freely programmable for multiple sawing jobs with various cutting lengths and quantities. Automatic feed unit with 500 mm ball screw incremental feed and automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. Chedpjfu Nbbefx Adpoc Fully hydraulic control of saw frame and clamping devices Preselection of 3 different material feed speeds Visualization of the entire workflow with simple data entry.