Beli Mesin bor radial berkecepatan tinggi bekas (59)

Kondisi: bekas, Tahun pembuatan: 1984, 445 Dwjdpfx Afjyfwzbowoc

Kondisi: siap digunakan (bekas), donau-dr23-de Dwjdpfey Uv Tvex Afwec

Kondisi: baik (bekas), Tahun pembuatan: 1984, nomor mesin/kendaraan: 332, Offer 24130 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drilling spindle taper: MK 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2,000 rpm - 3 feed rates: 0.1 – 0.3 mm - Min./max. spindle-table distance: 310 / 610 mm - Drilling radius min./max.: 380 / 1,200 mm Dwodpfx Afetxzrwswjc - Table height: 720 mm - Table size: 1,200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Required space approx.: W 1,200 x H 2,800 x D 2,300 mm - Weight approx.: 1,500 kg - Equipped with: - Thread-cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the rear machine side

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Dwsdpfx Afsyhdvkowec Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 2355-2, 24416 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill travel: 150 mm - 18 spindle speeds: 45-2240 rpm - 4 feed rates: 0.1–0.45 mm/rev - Min./max. distance spindle to table: 300 / 700 mm - Drilling radius min./max.: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirements (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant device - T-slots vertical on the left machine side Dwjdeufw S Rspfx Afwsc

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Dwedpfx Aeylnpiefwoc Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 1985, Spindle speeds - infinitely variable 26 - 1650 rpm Operating voltage 380 V Frequency 50 Hz Rated current 15 A Connected load 6.5 kW Tool holder MK 4 Machine weight approx. 2.3 t Space requirements approx. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connected load: 6.5 kW Djdovylh Ujpfx Afwowc Automatic feed: 0.05 - 0.45 mm/rev Column traverse speed: 40 mm/s Column stroke: 450 mm Quill stroke: 200 mm Drilling area: 430 - 1150 mm Spindle height adjustment: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Dwjdpfxeu Et Nbj Afwsc Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Dedpfxsynt Uce Afwowc Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm Dwsdpfexn A Spex Afwoc • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 1991, Meja kerja 600mm x 1200mm Dodpexpfglsfx Afwswc Perjalanan lengan 600mm Pegangan alat MK 3 Kapasitas pengeboran 28mm pada baja Alat pembuat ulir Sistem pendingin Dokumentasi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1983, Work table 600mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Coolant system Electrics: 24V control voltage Emergency stop: 2-channel Safety guard at the drill Dwsdpfx Afjmt Ed Rowoc Complete overhaul in 2025 12 months warranty New coating RAL 7035/7031

Kondisi: baik (bekas), 1 mesin bor radial cepat bekas Merek: Donau Tipe: DR 28 Z Tahun pembuatan: 1985 Data teknis: - Kapasitas pengeboran pada baja penuh ST 60: 28 mm - Kapasitas pengeboran pada GG 25: 40 mm - Pembuatan ulir pada ST 60: M 30 - Pembuatan ulir pada GG 25: M 40 - Dudukan spindel bor: MK 3 Dedpjzl Ufcefx Afwjwc - Diameter spindel: 50 mm - Langkah spindel: 150 mm - 18 kecepatan spindel bor: 45 - 2240 putaran/menit - 4 kecepatan umpan pengeboran: 0,1 - 0,45 mm - Jarak minimum/maksimum antara spindel dan meja: 300 / 700 mm - Radius pengeboran minimum/maksimum: 305 / 1005 mm - Tinggi meja: 820 mm - Ukuran meja: 1200 x 600 mm - Penggerak: 400 V / 6 kW - Luas yang dibutuhkan: sekitar P 1300 x T 2800 x L 2300 mm - Berat: sekitar 1500 kg - Dilengkapi dengan: - Perlengkapan pembuatan ulir - Penjepit kolom dan lengan hidrolik - Perlengkapan pendingin - Alur T vertikal di sisi kiri mesin

Kondisi: bekas, Tahun pembuatan: 1960, Technische Details: Dwsdpfxsx Afn Nj Afwjc

Kondisi: bekas, Tahun pembuatan: 1976, Technical details: Dwodpfewi Iqvjx Afwsc Drilling capacity in steel (diameter): 32 mm Throat depth: ./x. . 400 / 50 mm Horizontal travel of drilling head: 400 mm Drilling head vertically adjustable: 400 mm Quill stroke: 150 mm Spindle taper: MK 4 Grinding spindle speed: 100 - 2000 rpm Spindle outreach: min./max.: approx. 400 / 50 mm Vertical arm adjustment: 850 mm Horizontal arm adjustment: 400 mm Arm length: 1360 mm Arm horizontal: swiveling mm/min Drill spindle speed range: 100...2 step rpm Feed rates: 0.1 / 0.2 / - step mm/rev Table size: 00 x 510 mm Distance table - lower edge of spindle: min./max.: 350 / 800 mm Total power requirement: 2.4 kW Approximate machine weight: 1.8 t Machine dimensions approx. LxWxH: 1.3 x 1.3 x 2.25 m Equipment: 2x base rails Possibility to mount a vertical table Accessories: various clamping devices

Kondisi: bekas, Tahun pembuatan: 1991, penjepit spindle: MK 4, Meja kerja 600mm x 1200mm Perjalanan lengan 600mm Pemasangan alat MK 4 Dedpfxex N Ifto Afwewc Kapasitas bor 40mm pada baja Perangkat pengetapan ulir Perangkat pendingin Dokumentasi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Kapasitas pengeboran St 60/GG 22: 40/50 mm Pengeboran berulir St 60/GG 22: M 36/M 45 Luas meja penjepitan: 600 x 1800 mm Penyesuaian tinggi lengan: 450 mm Radius pengeboran kecil/besar: 305/1305 mm Pemasangan spindel: SK 40 Langkah pinol: 200 mm Kecepatan spindel tanpa langkah: 15 - 2800 rpm Djdpfx Afjy I Ua Ijwewc Feed tanpa langkah: 5 - 2000 mm/menit Penggerak spindel, dikontrol frekuensi: 5,5 kW Koneksi listrik: 400 V, 14 kVA Berat: 3400 kg Kebutuhan tempat: 3800 x 2000 x 2500 mm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Dwjdpfxszrr Uus Afwec

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Drilling capacity in steel (diameter): 32 mm Throat depth: 636 mm Maximum workpiece height: 720 mm Spindle speeds: 38 - 2000 rpm Thread cutting: 38 - 643 rpm Stroke: 450 mm Maximum quill travel: 170 mm Total power requirement: 6 kW Machine weight: approx. 1.9 t Space requirements: approx. 2.5 x 1.5 x 2.2 m Djdpfx Aowvl Irofwowc Left/right rotation, thread cutting unit Infinitely variable feed adjustment

Kondisi: bekas, Tahun pembuatan: 1968, Radial drill cepat Donau tipe DR 32 Kecepatan putar: 60 - 1800 rpm Jangkauan lengan: 600 mm Pelat dasar: 100 x 1400 x 110 mm Perangkat tapping ulir Sistem pendingin cairan Lampu mesin Pemegang quick-change dengan insert Ragum mesin Dwjdpex Hgkvjfx Afwsc

Kondisi: baik (bekas), Machine pictures 1 to 9 Gillardon Price €9,500 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 27 - Spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW - Required space approx. W 1200 x H 2800 x D 2300 mm Dwjdpfxeu Nm Nis Afwoc - Weight approx. 1500 kg - including: thread cutting device - hydraulic column and arm clamping - coolant system - T-slots vertical at the rear machine side Machine 2 pictures 10 to 15 HKS 34 MT Price €16,500 Drilling capacity: 45 mm Table size: 1200 x 560 mm Drilling capacity: 45 mm Spindle taper: MT 4 Quill stroke: 170 mm Speed / steps: 70–2000 rpm Feed / steps: 0.1, 0.2, 0.3 mm/rev Motor: 2.9 kW

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Dwsdeyxw Ddepfx Afwjc T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: diremajakan ulang (bekas), Perbaikan papan kecepatan untuk berbagai model. Hubungi kami jika tingkat transmisi tidak lagi berfungsi sebagaimana mestinya. Dwedpfx Aoy Rfzuefwjc

Kondisi: hampir baru (bekas), Cocok untuk Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Anda Dodpfx Afsy Ri Hnewewc

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Danumeric 440 - Fully Refurbished and Upgraded to Digital Controls in 2024 Machine Specification • Worktable 1800 x 600 mm with 4 T-slots • Cantilever travel 1050 mm Dodpfx Aou Dg D Aofwewc • Drilling spindle SK 40 with automatic tool clamping • Infinitely variable spindle speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots at the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting unit • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z axis): 200 mm Column travel (W axis): 410 mm Distance spindle nose–table (min): 70 mm Distance spindle nose–table (max): 680 mm Distance spindle nose–floor (min): 970 mm Distance spindle nose–floor (max): 1580 mm Drilling radius: 540 - 1590 mm Worktable height: 900 mm Machining Capabilities Max. solid drilling capacity: St 60: Ø 40 mm GG 22: Ø 50 mm Tapping capacity: St 60: M 36 GG 22: M 42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant from: 15 – 2000 rpm Feed Drives X-axis AC servo motor: 0.25 kW Y-axis AC servo motor: 0.25 kW Z-axis AC servo motor: 4.50 kW W-axis AC servo motor: 2.50 kW Rapid traverse speed (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse speed (W): 3 m/min Feed rates infinitely variable: 5 – 2000 mm/min Accuracy Positioning accuracy X,Y-axis over 1200 mm: ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit (clamping): 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging) With 1800 x 600 mm table: 2800 kg CNC Control System Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: Backlit TFT flat screen, clearly visible from all angles, 215 x 160 mm Position indication: Cartesian or polar, in absolute or incremental values Units: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subprogram system: yes Machining Cycles Standard software options: Interactive programming, 38 zero point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: Cycles to determine zero points by manual probing of workpieces for: - Any clamped rectangular parts - Any clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges or faces Test graphics: Graphical display of drilling patterns Data interfaces: USB