Beli Mesin bor radial berkecepatan tinggi bekas (63)

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 (MT 4) • Infinitely variable speed setting • Infinitely variable quill feed • Thread cutting device Pedpfox Uwpxex Agderb • 2 T-slots (18 mm) each on the rear and left side of machine base • 3-axis digital display • Machine lamp • Central lubrication • Table top machined all around • Drill guard • Coolant system Dimensions and Travels Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke mm 220 Column travel mm 450 Distance spindle nose to table top min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Capabilities Drilling capacity (solid material) St 60 ⌀ 45 mm GG 22 ⌀ 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 200 Feed Drives Feed, stepless mm/rev 0.02 – 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Kondisi: baik (bekas), Tahun pembuatan: 1985, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 32 mm, panjang total: 900 mm, gores kuas bulu: 160 mm, tinggi total: 1.800 mm, lebar total: 950 mm, kedalaman tenggorokan: 630 mm, kecepatan spindel (min.): 75 rpm, panjang meja: 800 mm, kecepatan spindel (maks.): 2.800 rpm, lebar meja: 500 mm, berat keseluruhan: 800 kg, daya: 1 kW (1,36 hp), Mesin bor radial cepat dengan lengan yang dapat ditekuk, penjepit pneumatik, jangkauan 100-710 mm, kapasitas pengeboran Ø 30 mm, langkah spindel 160 mm, kecepatan putaran 80 - 2800 RPM, motor 2 kecepatan 1/1,4 kW, spindel MK-4, umpan otomatis, dimensi 90 x 100 x 200 cm, berat sekitar 1000 kg. Predpfxox Dmn He Agdeb

Kondisi: siap digunakan (bekas), donau-dr23-de Prjdsy Uv Tvopfx Agdjb

Kondisi: bekas, Tahun pembuatan: 1989, bohrleistung-maschinendaten Pjdpjy Aa H Njfx Agdsrb

Kondisi: baik (bekas), Tahun pembuatan: 1985, Spindle speeds - infinitely variable 26 - 1650 rpm Operating voltage 380 V Psdpfsvylh Uex Agdorb Frequency 50 Hz Rated current 15 A Connected load 6.5 kW Tool holder MK 4 Machine weight approx. 2.3 t Space requirements approx. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 15 A Connected load: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column traverse speed: 40 mm/s Column stroke: 450 mm Quill stroke: 200 mm Drilling area: 430 - 1150 mm Spindle height adjustment: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Kondisi: baik (bekas), Tahun pembuatan: 1984, nomor mesin/kendaraan: 332, Offer 24130 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drilling spindle taper: MK 4 Pjdetxzrwspfx Agdjrb - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2,000 rpm - 3 feed rates: 0.1 – 0.3 mm - Min./max. spindle-table distance: 310 / 610 mm - Drilling radius min./max.: 380 / 1,200 mm - Table height: 720 mm - Table size: 1,200 x 500 mm - Drive: 400 V / 2.0 / 2.4 kW - Required space approx.: W 1,200 x H 2,800 x D 2,300 mm - Weight approx.: 1,500 kg - Equipped with: - Thread-cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertical on the rear machine side

Kondisi: bekas, Kapasitas pengeboran pada baja (diameter) 32 mm Jangkauan 1230 mm Luas meja 1200 x 500 mm Langkah pengeboran 180 mm Umpan – otomatis 0,10 - 0,15 - 0,20 - 0,30 mm Pjdezwg Rujpfx Agdsrb Kecepatan putaran 45 - 1370 RPM Collet MK 4 Total kebutuhan daya 2,7 kW Berat mesin sekitar 1,8 t Ruang yang dibutuhkan sekitar 2,2 x 1,8 x 2,3 m Dilengkapi dengan roda cepat untuk: - Umpan - Perangkat pemotong ulir

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Predpfxeyhdvks Agdob Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: bekas, Tahun pembuatan: 1987, Kami menawarkan mesin bor radial cepat Donau DR 40-Z bekas ini, tahun produksi 1987. Predpfx Agsy Dn E Nedjb Produsen: Donau Tipe: DR 40-Z Nomor seri: 1146-3 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami. Lokasi mesin berada di Osterode/Harz. Mesin dapat dilihat berdasarkan perjanjian. Ini adalah mesin bekas, oleh karena itu dijual tanpa jaminan apa pun.

Kondisi: hampir baru (bekas), Donau Donauflex 135 Mesin Bor Radial Kecepatan Tinggi Prodszgvmqepfx Agdob Produsen: Donau Tipe: Donauflex 135 Tahun pembuatan: 2020 Kondisi: Sangat baik, bekas namun seperti baru Tersedia segera dari stok.

Kondisi: baik (bekas), Tahun pembuatan: 1992, nomor mesin/kendaraan: 2355-2, 24416 Technical specifications: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill travel: 150 mm - 18 spindle speeds: 45-2240 rpm - 4 feed rates: 0.1–0.45 mm/rev - Min./max. distance spindle to table: 300 / 700 mm - Drilling radius min./max.: 305 / 1005 mm - Table height: 820 mm - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirements (approx.): W 1300 x H 2500 x D 2300 mm - Weight (approx.): 1500 kg Equipped with: - Thread cutting device - Hydraulic column and arm clamping Podpfx Ageufw S Rodorb - Coolant device - T-slots vertical on the left machine side

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1983, Work table 600mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Tapping device Coolant system Electrics: 24V control voltage Emergency stop: 2-channel Prjdpomt Ed Refx Agdsb Safety guard at the drill Complete overhaul in 2025 12 months warranty New coating RAL 7035/7031

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed Prodjylnpijpfx Agdjb • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: baik (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed adjustment • Infinitely variable quill feed • Tapping device • Two 18 mm T-slots each on the machine base, rear and left sides • Machine lamp • Central lubrication system • Table top machined all around • Drill guard • Coolant system Dimensions and Travel Ranges Tool holder MK 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Podpfoynt Ucsx Agdjrb Column stroke mm 450 Distance spindle nose – min mm 40 table top max. mm 710 Distance spindle nose – min mm 840 base plate max. mm 1510 Drilling radius min mm 540 max. mm 1590 Work table height mm 900 Machining Capacities Drilling capacity (solid) St 60 ⌀ 45 GG 22 ⌀ 55 Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from: min-1 15 - 200 Feed Drives Feed, infinitely variable mm/rev 0.02 - 0.7 Feed force N 12000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight of DANUFLEX 145 (without packaging) With table 750 x 1200 mm kg 2600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical circuit diagram

Kondisi: bekas, Tahun pembuatan: 1990, nomor mesin/kendaraan: 2316-3, 10622 Technical Data: - Drilling capacity in solid steel ST 60: 28 mm - Drilling capacity in cast iron GG 25: 40 mm - Thread cutting in ST 60: M 30 - Thread cutting in GG 25: M 40 - Drill spindle taper: MT 3 - Spindle diameter: 50 mm - Quill stroke: 150 mm - 18 spindle speeds: 45 – 2240 rpm - 4 feed rates: 0.1 – 0.45 mm/rev - Min./max. spindle-to-table distance: 300 / 700 mm - Min./max. drilling radius: 305 / 1005 mm - Table height: 820 mm Prodpfx Agju Et Nbodjb - Table size: 1200 x 600 mm - Drive: 400 V / 6 kW - Space requirement (approx.): W 1300 x H 2800 x D 2300 mm - Weight (approx.): 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Vertical T-slots on the left-hand side of the machine

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine Specifications • Worktable 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle underside - min mm 70 Table top max. mm 680 Distance spindle underside - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Capacity Drilling capacity solid St 60 Ø 40 GG 22 Ø 50 Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% ED. Speed range: min-1 15 - 2800 Torque Nm max. 250 Constant from min-1 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds, infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X-, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat display, backlit, clearly visible from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Measuring unit: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining process, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for: Podpfexn A Spsx Agdjrb - Freely mounted rectangular parts - Freely mounted round parts - Centering for cast and flame-cut parts - Angle position detection for round parts by probing reference edges/surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Kondisi: bekas, Tahun pembuatan: 1991, Meja kerja 600mm x 1200mm Prodpjxpfglofx Agdsb Perjalanan lengan 600mm Pegangan alat MK 3 Kapasitas pengeboran 28mm pada baja Alat pembuat ulir Sistem pendingin Dokumentasi

Kondisi: baik (bekas), 1 mesin bor radial cepat bekas Merek: Donau Tipe: DR 28 Z Tahun pembuatan: 1985 Data teknis: - Kapasitas pengeboran pada baja penuh ST 60: 28 mm - Kapasitas pengeboran pada GG 25: 40 mm - Pembuatan ulir pada ST 60: M 30 - Pembuatan ulir pada GG 25: M 40 - Dudukan spindel bor: MK 3 - Diameter spindel: 50 mm - Langkah spindel: 150 mm - 18 kecepatan spindel bor: 45 - 2240 putaran/menit - 4 kecepatan umpan pengeboran: 0,1 - 0,45 mm - Jarak minimum/maksimum antara spindel dan meja: 300 / 700 mm - Radius pengeboran minimum/maksimum: 305 / 1005 mm - Tinggi meja: 820 mm - Ukuran meja: 1200 x 600 mm - Penggerak: 400 V / 6 kW - Luas yang dibutuhkan: sekitar P 1300 x T 2800 x L 2300 mm - Berat: sekitar 1500 kg Pjdpfx Agezl Ufcjdsrb - Dilengkapi dengan: - Perlengkapan pembuatan ulir - Penjepit kolom dan lengan hidrolik - Perlengkapan pendingin - Alur T vertikal di sisi kiri mesin

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, kapasitas pengeboran: 40 mm, gores kuas bulu: 200 mm, diameter quill: 80 mm, Machine configuration • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable spindle speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots 18 mm on the rear of the machine base • 2 T-slots 18 mm on the left side of the machine base • Tapping device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety enclosure • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 T-slot spacing mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose - table surface min. mm 70 table surface max. mm 680 Distance spindle nose - floor min. mm 970 floor max. mm 1580 Drilling radius mm 540 - 1590 Working table height mm 900 Machining Data Drilling capacity (solid material): St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting: St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 - 2800 Torque Nm max. 250 Constant torque speed range: min⁻¹ 15 – 2000 Feed Drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Psdpfx Agezrr Uuedjrb Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Screen: TFT flat display, backlit, easily readable from all angles, 215 x 160 mm Position display: Cartesian or polar, dimensioning absolute or incremental Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool suggestions according to machining method, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram technique: yes Processing Cycles Standard software options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selection functions for targeted re-entry Zero point detection: Cycles for determining zero points by manual probing of the workpiece for: - arbitrarily clamped rectangular parts - arbitrarily clamped round parts - centering of cast and flame cut parts - angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Kondisi: baik (bekas), Machine pictures 1 to 9 Gillardon Price €9,500 Technical specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 27 Pedpfx Agsu Nm Niederb - Spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW - Required space approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - including: thread cutting device - hydraulic column and arm clamping - coolant system - T-slots vertical at the rear machine side Machine 2 pictures 10 to 15 HKS 34 MT Price €16,500 Drilling capacity: 45 mm Table size: 1200 x 560 mm Drilling capacity: 45 mm Spindle taper: MT 4 Quill stroke: 170 mm Speed / steps: 70–2000 rpm Feed / steps: 0.1, 0.2, 0.3 mm/rev Motor: 2.9 kW

Kondisi: bekas, Tahun pembuatan: 1991, penjepit spindle: MK 4, Meja kerja 600mm x 1200mm Perjalanan lengan 600mm Podpfx Aox N Iftjgderb Pemasangan alat MK 4 Kapasitas bor 40mm pada baja Perangkat pengetapan ulir Perangkat pendingin Dokumentasi

Kondisi: diremajakan ulang (bekas), Fungsionalitas: berfungsi sepenuhnya, panjang meja: 1.200 mm, lebar meja: 500 mm, penjepit spindle: MK 3, jenis penyesuaian ketinggian: listrik, Donau DR23 Mesin Bor Radial – Mesin Berkualitas Kokoh Dijual mesin bor radial Donau DR23 yang andal, ideal untuk bengkel, konstruksi logam, atau aplikasi industri. Mesin ini menonjol dengan konstruksi yang kokoh, presisi tinggi, serta kemampuan penggunaan yang fleksibel untuk pengeboran, chamfering, dan pemotongan ulir. Podpfx Ajyrtkxogderb Rincian: Pabrikan: Donau Model: DR23 Mesin bor radial direkondisi oleh Vaumtec Chuck cepat tukar Konstruksi dari cor yang stabil Lengan penyangga dapat disesuaikan untuk pengerjaan fleksibel pada benda kerja berukuran besar Cocok untuk baja, aluminium, dan logam lainnya Putaran kanan-kiri

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1995, Kapasitas pengeboran St 60/GG 22: 40/50 mm Pengeboran berulir St 60/GG 22: M 36/M 45 Luas meja penjepitan: 600 x 1800 mm Penyesuaian tinggi lengan: 450 mm Radius pengeboran kecil/besar: 305/1305 mm Pemasangan spindel: SK 40 Langkah pinol: 200 mm Kecepatan spindel tanpa langkah: 15 - 2800 rpm Feed tanpa langkah: 5 - 2000 mm/menit Penggerak spindel, dikontrol frekuensi: 5,5 kW Koneksi listrik: 400 V, 14 kVA Berat: 3400 kg Prodoy I Ua Ijpfx Agdob Kebutuhan tempat: 3800 x 2000 x 2500 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 1983, Drilling capacity in steel (diameter): 32 mm Prsdpswvl Irsfx Agdjb Throat depth: 636 mm Maximum workpiece height: 720 mm Spindle speeds: 38 - 2000 rpm Thread cutting: 38 - 643 rpm Stroke: 450 mm Maximum quill travel: 170 mm Total power requirement: 6 kW Machine weight: approx. 1.9 t Space requirements: approx. 2.5 x 1.5 x 2.2 m Left/right rotation, thread cutting unit Infinitely variable feed adjustment

Kondisi: bekas, Tahun pembuatan: 1968, Radial drill cepat Donau tipe DR 32 Psdex Hgkvepfx Agdsrb Kecepatan putar: 60 - 1800 rpm Jangkauan lengan: 600 mm Pelat dasar: 100 x 1400 x 110 mm Perangkat tapping ulir Sistem pendingin cairan Lampu mesin Pemegang quick-change dengan insert Ragum mesin