Kondisi: baik (bekas), Tahun pembuatan: 2006, 1 Cgodszatfrepfx Akasu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Spannkraft: 650 t Schraubendurchmesser: 60 mm Abstand zwischen den Stützstreben V: 960 mm Abstand zwischen den Stützstangen H: 1100 mm Schussvolumen: 890 cm³ Csdszaqygspfx Akajgu Typ: Horizontal Antrieb: Hydraulisch

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2017, gaya penjepit: 1.600 kN, diameter sekrup: 50 mm, berat injeksi: 313 g, berat keseluruhan: 6.983 kg, Hydraulic injection moulding machine from 2017. This SUMITOMO SHI DEMAG Systec 160/520-600 features a clamping force of 1600 kN and a tie bar clearance of 520 mm. The machine is equipped with an injection unit offering screw diameters of 40 mm, 45 mm, and 50 mm and a maximum shot weight of 313 g. If you are looking for high-quality injection moulding machines, you should consider the SUMITOMO SHI DEMAG Systec 160/520-600 that we have for sale. Contact us for further details. Csdpezbh Epofx Akaegu • Tie bar distance: 520 mm • Injection unit: 600 • Control system: S-Dias • Screw diameter: 40 / 45 / 50 mm • Injection pressure: 2438 / 1914 / 1550 bar • Shot volume: 210 / 294 / 363 cm³ • Shot weight (PS): 184 / 254 / 313 g • Injection stroke: 475 / 469 / 396 mm • Installed heating capacity: 11.1 / 11.3 / 15.7 kW • Oil tank capacity: 290 l • Pump drive: 25 / 45 kW • Noise level: 69 dB(A) • Dimensions: 5.6 x 2.1 m • Main electrical connection: 3/400 V, 50 Hz, 167 A • Maximum pressure: 190 bar • Platen size: 770 x 770 mm • Max. mould weight: 1300 kg • Max. opening stroke: 500 mm • Min/Max mould height: 275 / 685 mm • Distance between platens: 1085 / 1185 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 67 h, gaya penjepit: 1.600 kN, diameter sekrup: 45 mm, berat keseluruhan: 5.900 kg, produsen pengendali: ARBURG, model controller: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine includes a take-out robot and an enclosure with a FilterFanUnit to ensure clean operation. Ideally suited for precision plastics processing, it offers a mould height of 250 mm and a platen gap of 825 mm. Please contact us for further information regarding this machine. Additional equipment • Cooling water connection: Max. temperature: 30°C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical advantages of the machine • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 variable displacement pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Central mounting platen set, 125 mm • Machine raised by 100 mm (enhanced vibration elements) • 8 programmable digital inputs and outputs • 6 electrical heating control circuits for the mould • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heating standby mode • Sound pressure level: 70 dB(A) | ± 3 Additional Information • Screw diameter: 45 mm • Injection pressure (max): 1580 bar • Shot weight (max, g PS): 232 g Cedpex D E Dyjfx Akaegu • Heating capacity: 9.7 kW | 5 zones • Net machine weight: 5900 kg

Kondisi: bekas, Tahun pembuatan: 2013, jam operasional: 29.000 h, gaya penjepit: 50 kN, volume langkah: 59 cm³, tekanan injeksi: 2.500 batang, berat keseluruhan: 3.700 kg, diameter konveyor sekrup: 25 mm, Freight basis: ex works Delivery time: by arrangement Terms of payment: 100% prior to machine collection, strictly net Manufacturer: Krauss Maffei Model: KM50-180AX Condition: from ongoing production Operating hours: approx. 26,000 CLAMPING UNIT: Clamping force: 50 t Opening stroke: 300 mm Min. mould installation height: 150 mm Max. mould installation height: 470 mm Tie bar distance (h x v): 410 x 360 mm Platen dimensions (h x v): 510 x 460 mm Centering diameter (nozzle/ejector plate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Shot weight in polystyrene: 54 g Stroke volume: 59 cm³ Injection pressure: 2,500 bar CONTROL: MC5 Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: 2 x (hydraulic core pull unit) Air valves: 2 Hot runner zones: 6 Cgsdpfx Aksppigdoasu Robot interface: Euromap 67 Other equipment: Quality monitoring package GENERAL DATA: Installed heating capacity: 8.1 kW Pump drive power: not applicable Total connected load: motor + heating Total weight: 3,700 kg Overall dimensions (L x W x H): 4.4 x 1.6 x 1.9 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 13.000 kN, KM1300-8100MX-2016 Cedjy Emurjpfx Akaogu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 6.500 kN, Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars (vertical): 960 mm Cjdpfsy Eyxdsx Akaogu Distance between tie bars (horizontal): 1110 mm Shot volume: 1284 cm³ Type: Horizontal Drive: Hydraulic Clamping force: 650 t Screw diameter: 80 mm Shot weight: 1170 g Distance between tie bars (vertical): 960 mm Distance between tie bars (horizontal): 1110 mm Shot volume: 1284 cm³ Type: Horizontal Drive: Hydraulic Injection Moulding Machine – KM 650 GX Injection Unit: SP 3000 Screw Diameter: 80 mm Clamping Unit Clamping force: 6500 kN Mold holding force: 455 kN Platen dimensions (H × V): 1540 × 1440 mm Space between tie bars (H × V): 1110 × 960 mm Max. mold height: 1450 mm Mold installation height (min./max.): 450 / 1000 mm Opening stroke: 1000 mm Ejector stroke: 250 mm Ejector force (forward/return): 95 / 49 kN Injection Unit Screw diameter: 80 mm L/D ratio: 21.3 Injection pressure: 1538 bar Shot volume: 1284 cm³ Shot weight (PS): 1170 g Injection rate: 141 cm³/s Injection speed: 133 mm/s Injection power: 60 kW Plasticizing rate (PS): 139 g/s Installed heating power: 36 kW Nozzle retraction force: 7 kN Drive and Energy Installed pump power: 90 kW Dry cycle time (EUROMAP 6): 3.0777 s Dry cycle time (KM norm): 2.5555 s Machine Dimensions and Weight Dimensions (L × W × H): 8.03 × 2.88 × 2.45 m Net weight: 12,000 kg Max. mold weight: 11,000 kg Oil tank capacity: 1,180 l

Kondisi: hampir baru (bekas), Tahun pembuatan: 2015, jam operasional: 47.247 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 230999, gaya penjepit: 500 kN, diameter sekrup: 35 mm, volume langkah: 115 cm³, berat injeksi: 105 g, Perlengkapan: dokumentasi / manual, Here we offer, as dealers in injection moulding machines, the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines with a year of manufacture from 2010 onwards. We have been wholesale dealers of injection moulding machines for over 25 years. Manufacturer: Arburg Model: 320C 500-170 Serial number: 230999 Year of manufacture: 2015 Operating hours: 47,247 h Control system: Selogica Dimensions (L/W/H): 3.12 x 1.43 x 1.99 m Weight: 2,300 kg Functionality: fully operational Condition: very well maintained Extras: - 1 x core pull - Handling interface - 35 mm high-wear resistant thermoplastic screw/barrel - Complete documentation and software (on CF card) in German - From first owner, origin Germany - Regular maintenance by manufacturer and previous owner Visible peripheral devices are not included in the offer unless explicitly stated. Injection unit: Screw diameter: 35 mm Shot weight: 105 g/PS Injection pressure: 1,470 bar Injection volume: 115 ccm Clamping unit: Clamping force: 50 t / 500 kN Tie bar distance: 320 x 320 mm Platen size: 446 x 446 mm Mould height: 200 mm Max. daylight opening: 550 mm Ejector stroke / force: 125 mm / 30 kN Clamping system: hydraulic Motor power: 11 kW Heating power: 9.4 kW Total power: 21 kW The machine is available immediately from our warehouse in Hannover, Germany and has been tested. ✔ Warranty: Valid up to the first commissioning Loading/Shipping: Free loaded onto buyer’s truck or delivered free to destination against freight reimbursement – worldwide delivery possible Available in our Hanover / Germany warehouse for immediate inspection and shipment Information about the machines we offer and our company: - We only sell our own machines purchased from running production, ex stock Hannover - All machines offered are inspected and tested before dismantling Cgedpfxov U Tl Do Akaou - We do NOT sell insolvency goods – and we are NOT brokers dealing with third-party assets - All machines offered come from successful companies where maintenance and care are standard practice - All machines offered are available for viewing under power at our warehouse

Kondisi: bekas, Tahun pembuatan: 2005, Technical details: Codpswftr Defx Akajgu Screw diameter: 70 mm Shot weight in polystyrene: 687 g/PS Clamping force: 3,000 kN Machine weight (approx.): 19.4 t From serial production Preheating unit and air-soaking unit not included in scope of supply!

Kondisi: baik (bekas), Tahun pembuatan: 2013, gaya penjepit: 16.000 kN, Perlengkapan: dokumentasi / manual, machine_spec_001 Cgsdpsyh I Emofx Akaju

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 2.700 kN, Engel DUO 36060/2700 TECH (2024) Codpfoy U Hu Rsx Akaogu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penjepit: 24.000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL CLAMPING UNIT Clamping force: 24,000 kN (2,400 t) Opening stroke: 3,200 mm Max. platen daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Tie bar distance (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Ejector force: 614 kN Ejector force with pressure plate: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight (PS): approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Max. screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing capacity (3-zone screw): 235 g/s Plasticizing capacity (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating capacity: 97.4 kW DRIVE Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l Codoy U Hphjpfx Akajgu COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32 °C inlet): 6.6 m³/h Additional features: Cores: 3+3 Heating zones: 160 Cascade control: 56

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, gaya penjepit: 4.000 kN, berat keseluruhan: 22.500 kg, Hydraulic injection moulding machine from 2005. This Arburg SELECTA 820 S 4000 - 3200 offers a clamping force of 4000 kN and an opening stroke of 700 mm. The machine features a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you're looking for a high-quality injection moulding machine, consider the Arburg SELECTA 820 S 4000 - 3200, which we have available for sale. Contact us for further details. • Available quantity: 4 • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. weight of moving platen: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s Cgsdpfxsy A Ny Ee Akaju • Screw speed: 350 rpm • Peripheral screw speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle lift: 600 mm • Drive and performance: • Hydraulic pump motor: 55 kW • Installed total power: 96.2 kW • Heating: • Cylinder heating: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, spritzg16 Cgedpfx Aezardgjkasu

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, used-injection-moulding-machine-dr-boy-22d Cgjdpjzaqzdsfx Akaeu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 52.999 h, gaya penjepit: 1.500 kN, diameter sekrup: 40 mm, jarak antara tiang: 470 mm, volume langkah: 201 cm³, tekanan injeksi: 2.000 batang, berat injeksi: 184 g, tinggi cetakan (min.): 250 mm, arburg-470c-1500-400-spritzgiessmaschine-mit-sortierklappe-255 Cedpey U H Htefx Akaogu

Tahun pembuatan: 2013, Kondisi: bekas, Gravimetric Blenders (GRAVIX Series) These are robust multi-component systems. The photos show the distinctive hoppers for the various components, which the system weighs with utmost precision. The Moretto DGM Gravix 120 dosing system belongs to the mid-range category of gravimetric dosing machines, known for their highest precision and resistance to industrial vibrations. Key Technical Parameters This model is designed for precise mixing of multiple components directly at the machine throat. • Maximum output: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001%, thanks to technology that weighs each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (expandable depending on version). • Reaction speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weigh hopper volume: Optimized for medium-sized batches, freely suspended with no mechanical interference. _____ Key Technologies • VIS (Vibration Immunity System): Enables direct installation on injection molding or blow molding machines without any loss of accuracy due to machine movements. • Rotopulse: Special device for micro-dosing of additives (from 0.08 g) that prevents the formation of material mounds. • Double-Effect Mixer: The semi-spherical mixing chamber ensures perfectly homogeneous mixing without "dead zones." Cedpfx Akoy Uw Uboasgu • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet, or Modbus.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 29.500 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 231000, gaya penjepit: 2.000 kN, diameter sekrup: 55 mm, jarak antara tiang: 570 mm, volume langkah: 474 cm³, tekanan injeksi: 2.000 batang, berat injeksi: 434 g, lintasan ejektor: 225 mm, berat keseluruhan: 7.450 kg, Perlengkapan: dokumentasi / manual, Here we are offering the following well-maintained used injection moulding machine as a specialist dealer in injection moulding machines. Of course, we also purchase well-maintained injection moulding machines manufactured from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current information - Tax note and benefit for used machines From 01.07.2025, used machines can also be considered for a special depreciation allowance of 30% annually for tax purposes. Manufacturer: Arburg Model: 570C 2000-800 GE Serial number: to be provided Year of manufacture: 2015 Operating hours: approx. 29,500 h Machine number: 231000 Control system: Selogica Dimensions L/W/H: 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Fully functional Condition: very well maintained - German origin Extras: - Complete thermoplastic cylinder, high wear resistance, 55 mm - Thermoplastic processing - Open nozzle, 55 mm Csdpfxsw Tt R Is Akajgu - Central clamping plate set 570, Ø 125 mm - 2x core pullers - Complete documentation Injection unit: - Screw diameter: 55 mm - Shot weight: 434 g/PS - Injection pressure: 1,650 bar - Shot volume: 474 ccm Clamping unit: - Clamping force: 200 tonnes / 2,000 kN - Tie bar spacing: 570 x 570 mm - Mounting platen: 795 x 795 mm - Mould height: 300 mm - Max. daylight: 950 mm - Opening stroke: 650 mm - Ejector stroke/force: 225 mm / 66 kN - Hydraulic clamping unit Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW Visible peripheral devices are not included in the scope of delivery. The machine is immediately available from our warehouse in Hanover, Germany, and has been tested. Warranty: Warranty until initial commissioning. Shipping/Loading: Free loading onto buyer’s truck or free delivery within Germany against shipping reimbursement – worldwide delivery possible. Available directly from our warehouse in Hanover, Germany. Information regarding our offered machines and our company: - We only sell machines from our own inventory, sourced from active production, available from our Hanover warehouse - All machines offered are checked and tested before disassembly - We do N O T sell insolvency assets – we are N O T brokers selling third-party property. - All machines come from successful businesses that prioritize maintenance and care. - All offered machines can be inspected at our warehouse.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Clamping force: 200 t Screw diameter: 35 mm Cgodpjwpkfcefx Akaou Shot weight: 141 g Distance between tie bars (vertical): 570 mm Distance between tie bars (horizontal): 570 mm Shot volume: 154 cm³ Type: Horizontal Drive: Hybrid

Kondisi: baru, Tahun pembuatan: 2025, 1 Cgodsy Umpujpfx Akaeu

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, gaya penjepit: 1.700 kN, Spannkraft: 1700 t Schraubendurchmesser: 105 mm Abstand zwischen den Stützstreben V: 1420 mm Abstand zwischen den Stützsäulen H: 1870 mm Schussvolumen: 3721 cm³ Typ: Horizontal Antrieb: Hydraulisch KUKA-Roboter 6 Achsen Cgodpfoy Uk Emox Akaju Maschine neuwertig!

Kondisi: baik (bekas), Tahun pembuatan: 2007, specs-01 Cgjdpey Ukfmsfx Akaju

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 800 kN, 1 Csdpfx Aey Uffujkasgu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, tech-specs-650t-molder Cgedpjy Uffhjfx Akaeu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, gaya penjepit: 4.500 kN, 001 Cgedpfsy Ufd Rjx Akaou