Beli Mesin pres pelurus & mesin pres tekuk bekas (76)

Kondisi: baru, Tahun pembuatan: 2019, gaya penekanan: 400 t, Pressure: 400 t Upright width: 2500 mm Stroke: 600 mm Table size: 2500 x 2000 mm Distance table to bottom edge of ram: 600 mm Total power requirement: 18 kW Iodpfx Asd Ttydjg Rsap Approach speed: 9 mm/sec Return speed: 19 mm/sec Pump capacity: 67 l/min Total weight approx.: 26 t

Kondisi: bekas, Tahun pembuatan: 1965, de-hu-001 Iedpfx Aeyt R Dleg Reap

Kondisi: baik (bekas), Tahun pembuatan: 2011, Tekanan 160 t Iodpjytfblsfx Ag Roap Kebutuhan daya total 18,5 kW Berat mesin sekitar 13,5 t

Kondisi: bekas, Tahun pembuatan: 1966, druck-10t-richtpresse-eitel-rp10 Iodpfsymp R Rjx Ag Roap

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, nomor mesin/kendaraan: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t Space requirement approx.: 8800 x 1800 x 2200 mm Pressure adjustment via rotary dial, infinitely variable: 15-150 t Cylinder diameter: 100 mm Pressing speed (infinitely adjustable via joystick): 0-9.9 mm/s Servo motor: 2 kW Cooling unit: 1 kW Oil tank (under press table): 350 l Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two hydraulic cylinders. The straightening machine is prepared for the respective material type by using interchangeable rounded spacer elements. The 10 inserts are changed manually by simply sliding them into the retaining grooves. A basic set for one profile is included in the scope of delivery. The program for the relevant profile is then selected on the monitor. The monitor displays the ideal line and an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a support, and securely clamped with a quick-clamping device. Both the support and the quick-clamping device are quickly adjustable and mounted on a clamping plate. This clamping plate travels on a linear guide from left to right and vice versa. Transportation is via a chain drive powered by a servo motor. Movement is initiated via a joystick at the control panel. Once the profile is clamped, the operator moves the clamping plate into the press using the joystick. The travel speed is up to 100 mm per second, but can be infinitely reduced to 10 mm per second. For this, it is sufficient to gently release the control lever. A high-resolution camera now shows the profile in the press. The operator can clearly see any deviations from the ideal line. Depending on requirements, the operator presses or pulls the profile until the desired accuracy is achieved. Subsequently, the operator continues slowly through the press while monitoring on the screen in detail whether the profile is now straight. If necessary, the operator can move forwards or backwards to make further adjustments. Once straightened, the profile exits the press to the right and can be removed. The clamping plate can then be returned to the loading position on the left or loaded from the right to save time. Operation of the press is only permitted under the following conditions: Permitted ambient temperature: 5-60 °C Permitted relative humidity: at 20°C – 90%, at 40°C – 50% Height of installation location above sea level: +1000 m Isdpfx Ajfxygwjg Reap Permissible mains voltage fluctuations: +/- 10%

Kondisi: baru, Pressing force: 40 t Max. stroke: 300 mm Max. bending capacity – flat: 250 x 16 mm Working speed: 10 mm/sec Control system: NC Tool height: 250 mm Total power requirement: 4 kW Machine weight approx.: 1,190 kg Space requirements approx.: 650 x 1,250 x 1,300 mm Isdpfxeymf Nvs Ag Rsap The Gerd Wolff HP 40 is a hydraulic horizontal press with a wide range of combination options. Whether bending pipes, punching profiles, or cutting sheet metal—with the appropriate accessories, the HP 40 is a multifunctional press. Standard equipment - Ergonomic tool clamping table - Quick and easy tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control system Highlights - Operator panel with digital display - Simple tool change - Hardened support pins - Hydraulic speed regulation The HP 40 is manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". Images are for reference only and do not represent the machine to scale.

Kondisi: baru, Pressing force 20 t Max. stroke 200 mm Max. bending capacity – flat 200 x 10 mm Working speed 10 mm/sec NC control Tool height 150 mm Total power requirement 2.2 kW Machine weight approx. 640 kg Space requirement approx. 600 x 1100 x 1220 mm The Gerd Wolff HP 20 is a hydraulic horizontal press with a wide range of combination options. Whether you’re bending tubes, punching profiles, or cutting sheet metal – with the appropriate tooling, the HP 20 is a multifunctional press machine. Standard Equipment - Ergonomic tool clamping table - Quick tool change - Hydraulic speed and pressure adjustment - Easily adjustable back gauge - Induction-hardened support pins - NC control Highlights - Control panel with digital display - Quick tool change - Hardened support pins - Hydraulic speed regulation Iaedpfx Agoymf Ilo Rop The HD 180 is manufactured for our distribution brand “GERD WOLLF Maschinenfabrik” by a renowned producer in Turkey.

Kondisi: baru, Instead of €14,874 gross RRP, now only €9,499 net (€11,304 gross incl. 19% VAT). You save 24% compared to the RRP! Straightening Press 150 tons with electric motor and additional manual hand operation via lever pump, specifically designed for precision work. Available models: 30t 60t 100t 150t 200t >200t: on request Special machines: on request Brand new machine! We can also build a custom press according to your specifications. High-quality hydraulic workshop press with a maximum pressing force of 150 tons. The press can be operated conventionally in electric mode using a lever to raise and lower it. For precision tasks (e.g., pressing bearings, straightening, etc.), the press also features a manual hand pump, allowing you to finely adjust the force manually. The pressure cylinder is mounted on a sliding carriage, which allows it to be laterally shifted. This enables you to fully utilize the maximum frame width. Key features: - 150 tons maximum pressing force - Pressure gauge with manometer - 2 operating modes: electric or manual - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety features - Adjustable working height - Pull chains for easy height adjustment - Heavy-duty machine frame - Laterally adjustable cylinder (mounted on sliding carriage) The press can be tested under power at our location. ----- Numerous other workshop presses available in various designs, sizes, and with optional additional equipment! 30, 60, 100, 150, 180, 200 tons. ----- Simply contact us for a non-binding consultation. The stated price is net, plus 19% VAT. All information provided without guarantee. Europe-wide delivery possible! ----- Ijdpof Sqcksfx Ag Roap The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations take place through telecommunications (email, fax, phone, messaging portal). We will first provide you with a non-binding offer, which will include our general terms and conditions and cancellation policy with company information, prior to purchase or conclusion of contract.

Kondisi: baru, Tahun pembuatan: 2019, nomor mesin/kendaraan: DF0369, gaya penekanan: 220 t, Pressure: 220 t Clear width: 1,500 mm Stroke: 400 mm Approx. machine weight: 5.2 t Dimensions (L x W x H): approx. 4,000 x 1,950 x 2,900 mm Return force: 20 t Total power requirement: 30 kW Max. working height: 500 mm Max. approach speed: 10 mm Pressing speed: 10 mm/sec Return speed: 25 mm/sec Rapid traverse speed: 10 mm/sec Ijdpfx Asfxyiveg Reap Ram plate: 2,000 x 400 mm Table plate: 2,000 x 600 mm Table height above floor: approx. 900 mm Oil tank: 500 l Oil cooling (electric): 1.5 kW (max) Displacement measuring system: TURCK or Balluff Control system SIEMENS: S7 1500 or PILZ PSS 4000 Monitor: SIEMENS or OMRON

Tahun pembuatan: 1960, Kondisi: bekas, R.A.S. rotary mandrel press Model 200-20 Machine No. 117/6 Stroke 200 mm Pressing force 20 t Spindle diameter 60 mm Ijdpfx Agoic Rn Uj Rjap

Kondisi: bekas, Tahun pembuatan: 1981, Technical details: Iodpfsyk Utlsx Ag Reap Pressing force: 40 t

Kondisi: bekas, de_001 Iedpeyizw Uefx Ag Roap

Kondisi: baik (bekas), Manufacturer: Ursviken Model: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for fabrication of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with a Siemens SIMATIC panel and Rittal electric cabinet. Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table and ram in X-direction Large die tooling set, radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine placed 2,350 mm below ground level Specifications Metric US Standard Capacity: 1,000 tons Distance between uprights: 5,010 mm Table length: 3,000 mm Iaedpfx Agokvmi Ss Rep Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (estimated) Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: bekas, Technical details: Pressure: 2.5 t Outreach: 155 mm Maximum ram stroke: 280 mm Distance table/ram: 450 mm Clamping plate on table: 260 x 1000 mm Ram approach speed: 0.08 m/s Ram return speed: 0.32 m/s Ram bore: Ø 20 x 45 mm Height above floor: 930 mm Total power requirement: 1.1 kW Machine weight approx.: 500 kg Machine dimensions approx. LxWxH: 0.85 x 1.0 x 1.7 m Isdpfju Nfv Usx Ag Rjap The machine is equipped for straightening work.

Kondisi: bekas, Hydraulic Horizontal Straightening Press, Horizontal Press STENHOJ Type 40 Iodpfxoydqd Hj Ag Rjap Horizontal hydraulic press for straightening work on steel beams or welded assemblies Manufacturer No. 42615 Year of manufacture: 1984 Overhauled in 2025 – "Refurbished" Pressing force: 40 tons Ram stroke: 300 mm Piston rod diameter: Ø 80 mm Working height: 780 mm (floor to center of piston rod) Table size without pressure pads: approx. 1000 x 290 mm Installation dimension, ram + press yoke to counter bearing: 260 mm (with pressure pads on ram and counter bearing) Installation dimension, ram without press yoke to counter bearing: 440 mm (without pressure pads on counter bearing) Height of the two adjustable pressure pads: 130 mm Pressure pad width: 220 mm Advance speed: 10 mm/s Return speed: 20 mm/s Hydraulic tank: approx. 60 liters Motor power: 3 kW Power supply: 400 Volt, 50 Hz - Cylinder stroke controlled manually via operating lever, sensitive adjustment via mechanical control valve - Pressing force readable via pressure gauge manometer - Ram stroke with actual value display of stroke position; digital readout, ideal for precise repeat pressure point positioning during straightening - 2 pcs. adjustable counter bearings with threaded spindle (centered parallel adjustment from 290 to 890 mm) - Straightening tools with rounded pressure surfaces - Centrally height-adjustable feed rollers for material support, adjustable via handwheel (roller width = 250 mm) Required floor space (L x W x H): 170 x 140 x 100 cm Weight: 1250 kg In very good condition

Kondisi: baik (bekas), Tahun pembuatan: 1991, Hydraulic horizontal straightening and bending press Maximum pressing force: 160 t Manufacturer: MAE, Model: HY RI 160 RH, Year of manufacture: 1991. Iaodpfxscffzao Ag Rop For further technical data, see data sheets.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, gaya penekanan: 200 t, Main cylinder pressing capacity: 200 t - Maximum working pressure: 285 bar - Cylinder stroke: 1500 mm - Daylight width/height: 1500 mm - Distance between columns: 2050 mm - Maximum lateral cylinder displacement: 1450 mm - Maximum longitudinal frame displacement: 2800 mm - Table plate dimensions: 4000 x 2000 mm - Hydraulic unit power: 5.5 kW - Approach speed: 20 mm/s - Working speed: 2 mm/s - Hydraulic oil not included in delivery - Hydraulic power units are mounted on top of the press - Hydraulic manifold and valves supplied by Rexroth - Air filter brand: FILTREC - Oil filter brand: FILTREC - Air and water (chiller) cooling used for hydraulic system - Stroke cylinders integrated in the worktable Piston diameter: 25 mm - Stroke: 80 mm - Actuation via cylinder control or via hydraulic unit in lever mode - 10 stroke cylinders to be installed - Digital control with position measurement via encoder and pressure measurement with readout - Siemens touchscreen display KTP 900 – 9" for programming (up to 99 programs): - Maximum up/down stroke for cylinder - Pressure holding time under the table - Decompression time - Working pressure adjustment - Piece counter - Pre-stop up/down stroke with 0.1 mm accuracy - Alarm management - Frame-mounted display for real-time working parameter display - Wireless remote with two buttons for simultaneous operation - Control cabinet with Siemens CPU - Hydraulic unit with solenoid valves (replaces pendant control) - Air/oil heat exchanger with decompression valve 5. ELECTRICAL INSTALLATION AND SAFETY Iajdexrb Nbopfx Ag Rsp - The PLC system is SIEMENS (S7-1200 series) - Siemens LCD touchscreen (9 inches) MTP900 installed in the control cabinet - Electrical components from SIEMENS, ALLEN BRADLEY, and PHOENIX - System pressure for the pressure cylinder is set via LCD touchscreen - Operating modes (semi-automatic and automatic), power, vertical stroke, and upper cylinder dwell time are programmable - 99 recipes can be stored, all parameters above can be set for each recipe - Wireless remote activation - Dual button operation for slow or rapid up/down movement, emergency stop, and maneuver confirmation - For safety, a touch-sensitive safety edge is attached to the base of the portal columns - Control cabinet mounted on the side wall of the bridge - Rotational lock for the cylinder - Oil temperature is displayed on the LCD touchscreen - Hydraulic oil over-temperature warning displayed on the touchscreen - Filter contamination status shown on the touchscreen - System errors shown on the touchscreen - Press status displayed on the touchscreen - As soon as the oil temperature reaches 45°C, the air cooler starts to cool the oil. If temperature reaches 65°C, the machine halts operation until it has cooled back down - An operating manual is included - The system meets all essential safety and health requirements pursuant to CE regulations.

Kondisi: siap digunakan (bekas), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm, max. forming length: 3200 mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88 mm/s, bending speed: 1879.6 mm/s, bending angle range: 0°–180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm, weight: approx. 5300 kg. Iodpfx Ajtia Hhsg Rsap

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, Used straightening press in very good condition for sale. Isdpfx Agjufhzvj Rsap This universal and robust Stierli straightening press is equipped with a 5m straightening beam, allowing processing of beams up to HEA-600 and HEB-600 (at S-235). The machine operates using the reliable Stierli stroke fine adjustment control system, which makes it very user-friendly and enables fast, precise straightening and bending. Additional options can be added upon request, such as a powered roller conveyor, NC control, laser measurement, and more. (Note: The photo does not show the actual machine.)

Kondisi: baru, Pressing force: 60 t Max. stroke: 300 mm Max. bending capacity (flat): 300 x 16 mm Working speed: 10 mm/sec Control: NC Tool height: 300 mm Total power requirement: 5.5 kW Machine weight: approx. 1530 kg Iaedpfexfb Ikex Ag Rsp The Gerd Wolff HP 60 is a hydraulic horizontal press featuring a wide range of configuration options. Whether tube bending, profile punching, or sheet cutting – with the appropriate accessories, the HP 60 becomes a multifunctional machine among all presses. Standard equipment: - Ergonomic tool clamping table - Quick tool change system - Hydraulic speed and pressure adjustment - Easily adjustable backgauge - Induction-hardened support pins - NC control Highlights: - Control panel with digital display - Quick tool change - Hardened support pins - Hydraulic speed regulation The HP 60 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. Please note: the images are for orientation purposes only and do not represent the machine to scale.

Kondisi: baik (bekas), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press Iaedpfx Ageh Tk Dae Rsp - Flat bar bender: hydraulic profile bending machine - Base frame: on rollers, table foldable on both sides - Operating modes: manual and automatic operation - Accessories: see photos - Overall dimensions: 2155/1320/H1070 mm - Transport dimensions: 1320/840/H1245 mm - Weight: 404 kg

Tahun pembuatan: 1984, Kondisi: bekas, Printing machine, embossing machine, stamping machine Iasdped Hp Tzsfx Ag Rsp - Non-functional, control unit: defective - Pneumatic-hydraulic press - Stroke: 50 mm - Clear column distance: 850 mm - Table area: 400 x 370 mm - Dimensions: 1285/590/H1820 mm - Weight: 416 kg

Kondisi: baik (bekas), Hydraulic press, bending machine, straightening machine, profile straightening system, coil straightening machine, strip straightening device, shaft straightening system, combined bending machine-straightening press, profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press, horizontal bending machine - Hydraulic press: straightening system, straightening machine, profile straightening system with roller conveyor - Pressing force: 10 tons - Pressure: max. 100 bar - Roller conveyors: 2x 1000/170/H1110 mm / rollers Ø 56 x 140 mm Iaodpfx Agovgu Has Rep - Transport dimensions: 1335/1220//H1470 mm - Weight: 807 kg

Tahun pembuatan: 2006, Kondisi: bekas, Printing machine, embossing machine, stamping machine, rail stamping machine, embossing press, punching machine, pneumatic punch -Manufacturer: Stommel & Voos, rail stamping embossing press mounted on a heavy-duty frame -Type: SV700/6/PE/EF -Band width: 13 mm, convertible -Individual components: see photos -Accessories: no additional accessories Iasdpfx Agjkyy Ufj Rop -Dimensions: 820/520/H1680 mm -Weight: approx. 154 kg

Kondisi: baru, 2 Iedpfx Agjxcuyhs Roap