Tahun pembuatan: 2025, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, MOVE – the ultra-precise vacuum press with a massive usable area for vacuum form-laminating and vacuum veneering of curved workpieces. Featuring outstanding flexibility thanks to full mobility and a revolutionary folding mechanism, which reduces the footprint to just 45% when folded. Ultra-precise vacuum press with clamshell opening, including: - Revolutionary folding mechanism (reduces footprint to 45%) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) – by BECKER – optionally, automatic shut-off when target pressure is reached (for high vacuum volumes) - Pressure regulation from 400 to 900 mbar, analog vacuum pressure gauge - Highly elastic natural rubber membrane (resistant up to +130°C) - Quick-change membrane system - Rigid phenolic resin work surface (heat-resistant up to +120°C), 15-ply laminated - Gas-pressure damper for clamshell opening - Vacuum pressure display - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatic components and SIEMENS electrical engineering Technical specifications and dimensions: - Usable area: approx. 3050 x 1350 mm - Overall dimensions: approx. 3700 x 1700 x 1100 mm - Overall dimensions (folded): approx. 3700 x 770 x 1780 mm - Internal frame dimensions: approx. 3130 x 1430 mm - Voltage: 230 V - Power: 1.2 kW - Mains frequency: 50 Hz - Weight: 670 kg Godpfxsxu Ednj Ag Reuk

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2016, LAMELLA BODY PRESS GANNOMAT « CONCEPT 70 ECO » Complete in standard configuration including: - Sturdy, torsion-resistant steel frame in welded and bolted construction - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly clamped carcass joints - Counter-pressure surfaces (side pressure wall, base) are continuous, coated support plates with a thickness of 38 mm - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal-thread spindles (with increased pitch and concentricity accuracy) and high-performance travel nuts with grease reservoir - Pressing is performed electromotively by 2 separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously electronically adjustable via 2 potentiometers and controlled by frequency converters, making the pressing force regulation completely wear-free - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/second - Extremely simple operation - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Machine No. 563.624 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Gujdpfexvitiex Ag Rjk Set of machine feet for 500 mm working height Operating manual in German Completely overhauled by Ganner, 6 months spare parts warranty Location: ex stock 54634 Bitburg - immediately available -

Kondisi: bekas, Data teknis: Jumlah piston: 4 Diameter piston: 60 mm Koneksi ke pemanas sentral (CO) Ukuran rak: 2300x1100 mm Jarak bebas: 480 mm Penekanan hidrolik Daya motor: 3 kW Catu daya: 380 V Dimensi keseluruhan: Panjang: 3100 mm Lebar: 1500 mm Gujdpfjxx Nv Asx Ag Rsk Tinggi: 1650 mm Harga netto: 17.500 PLN

Kondisi: baru, Tahun pembuatan: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other versions available on request - 5 levels Gsdpfx Agsgu D Rmo Rouk - Clamping depth: 1050 mm - 1 pressure beam, 1500 mm long, 60 mm high, per level - 3 infinitely adjustable pendulum counter-bearings, 400 mm long, per level - 2 hold-down clamps with handwheel, per level - 5 support arms, per level - all support arms equipped with plastic (glue-repellent) pads - maximum pressing length: 1600 mm - Powder-coated (glue-repellent): grey-white RAL 9002, moving parts in light blue RAL 5012 - The presses are delivered ready to operate with pressure control valve and standardized air connection.

Kondisi: bekas, Bürkle HSO 240/D 340/140 Throughfeed Veneer Press / Glue Press / Panel Press Pressing Dimensions: 3400 x 1400 mm Maximum Hydraulic Pressure: 240 t Gujdpfxjwng Tyo Ag Rok Maximum Pressing Pressure: 6 kg/cm² Cylinders: 8 units, diameter 110 mm Stroke: 150 mm Solid Plates: 40 mm Heating medium: Water with boiler, heats up to 60 °C. With the appropriate boiler, platens can be heated up to 150 °C. Machine dimensions: 2500 x 3900 x H2800 mm, Weight: 8,500 kg Infeed Conveyor Dimensions: 2200 x 3600 mm, Weight: 500 kg Documentation available, first owner! Sold as a complete unit including conveyor belts. - Documentation available: No - CE Certificate available: No - Max. workpiece length [mm]: 3400 - Max. workpiece width [mm]: 1400 - Press platen material: Steel - Number of cylinders: 8 - Total hydraulic power [t]: 240 - Hydraulic pressure [kg/cm²]: 6 - Heating method: Water heated - Max. working temperature [°C]: 150 Financial information VAT: The stated price is net, plus VAT VAT/differential taxation: VAT is deductible for business customers Delivery and trade-in of any kind of industrial equipment possible at any time. Contact: Yorick Diebels

Kondisi: baru, Tahun pembuatan: 2025, en_001 Godod Nm Siopfx Ag Rouk

Tahun pembuatan: 2025, Kondisi: baru, INFINITY - the vacuum press system in custom lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in any length requested by the user. The specially developed and eponymous Infinity Principle, which allows the usable area to be extended almost infinitely in length at a highly cost-effective rate, is applied to every single component. The system offers maximum flexibility as well as top efficiency, because where the Infinity vacuum table and the rolling membrane system provide endless lengths, the multi-zone suction ensures maximum control. Thanks to this feature, only the section of the working surface currently in use is evacuated. INFINITY is perfect for all users who value an unlimited working area for a wide range of special laminations with the highest possible output volume. Direct from the manufacturer – including warranty! Specification: Length and width as per customer requirements! Table base made of a sturdy, welded steel construction, height-adjustable feet. The tabletop is a 21 mm thick birch plywood panel. A vacuum groove for membrane sealing, approx. 15 mm wide, is milled into the table surface. The membrane is wound onto a reel and can be unrolled manually across the table surface using a very easy-running linear slider. Patented vacuum buffer tank integrated into the table frame. The vacuum pump delivers 100 m³/hour. The table surface features multiple suction grooves, which are divided into several suction zones. Gujdpfjxu Edujx Ag Rek

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, Panjang rak: 3000 mm Guedsxxkmiopfx Ag Rsk Lebar rak: 1300 mm 6 piston hidrolik Sakelar pengaman tarik Pemanas oli listrik Berat: 3300 kg Layar sentuh Pengatur waktu Tahun produksi: 2021

Kondisi: bekas, Data teknis:\n\nDiameter briket: 70 mm\nPanjang briket: 70 mm\nDiameter tangki: 1200 mm\nTinggi tangki: 1000 mm\nKapasitas tangki: 1,13 m3\nKapasitas produksi: 70-120 kg/jam\nCatu daya: 400 V\nDaya motor: 11 kW\nSakelar keamanan Gusdpfxjxxxawo Ag Rek

Kondisi: bekas, Tahun pembuatan: 2006, 4 balok bergerak Dimensi kerja: Tinggi 269cm/360cm Gujdpfxoxu Ddao Ag Rjk Lebar sepatu 100mm Silinder diameter 30mm Silinder kerja ganda Langkah silinder vertikal 150mm Langkah silinder horizontal 100mm Sepatu pengunci hidrolik Pompa 1,73kW Tekanan 160 bar 380V

Tahun pembuatan: 1997, Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, berat kosong: 13.200 kg, lebar kerja: 1.100 mm, tinggi benda kerja (maks.): 35 mm, panjang kerja: 2.350 mm, nomor mesin/kendaraan: 8081.02, DETAIL TEKNIS Panjang kerja: 2.350 mm Lebar kerja: 1.100 mm Ketebalan maksimum yang dapat diproses: 35 mm Dimensi komponen maks. Ukuran papan maksimum: 1.100 mm × 2.350 mm Lebar film min. Lebar film minimum: 1.300 mm DETAIL MESIN Daya terpasang: 38 kW Guedpfjxyi Rpsx Ag Rjk Dimensi & Berat Dimensi pelat pemanas (L × P): 1.400 mm × 2.600 mm Luas efektif (L × P): 1.180 mm × 2.430 mm Berat: 13.200 kg

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 6 h, *Machine at a Special Price Our best-selling briquetting press, the classic model. + Proven, simple technology for extremely low susceptibility to failure + 25 years of experience, ongoing development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Options at additional cost: *Additional charge for the fill level sensor enabling automatic operation + €995 net *Additional charge for large pre-compression chamber + €970 Gujdpfx Agogl Nlmj Rjk (recommended for very light materials such as straw) Briquette diameter: 50 mm Front bush: 50 mm Max. briquette stroke: 40 mm Opt. briquette stroke: 40 mm Throughput capacity (material-dependent): up to 60 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 m³ Pump: 27 liters Hydraulic pre-compressor Press clamp cooling option: no Hydraulic oil cooling option: yes Fill level monitoring option: yes CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: room must be at least +5°C - Customer is responsible for preventing hydraulic oil loss - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Tahun pembuatan: 2025, Kondisi: baru, Exclusive at Columbus: the digital Master Manual featuring user knowledge compiled from over 45 years. Modular system – can be retrofitted at any time with a vertical opening mechanism and a heating system for plastic sheets! Direct from the manufacturer – including warranty! PIONEER Basic L – high-precision vacuum press including: • Quick-change membrane system • Gas pressure dampers for flap opening • Highly elastic natural rubber membrane (up to +130 °C) • Robust phenolic resin worktop (up to +120 °C) • 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) by BECKER • Analog vacuum pressure gauge • Connection for external vacuum bag • Feet with smooth-running swivel castors • Mounting device for vertical opening system • FESTO pneumatics and SIEMENS electrical engineering Technical data: • Voltage: 400 V Gjdpfx Agsxu Edhe Rsuk • Power: 1.3 kW • Mains frequency: 50 Hz Dimensions: • Usable area: approx. 3050 x 1350 mm • Inner frame dimensions: approx. 3130 x 1430 mm • Max. workpiece height: approx. 600 mm • Overall dimensions: approx. 3700 x 1640 x 1080 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Panjang rak: 3000 mm Lebar rak: 1300 mm Gjdow Nqnvepfx Ag Rouk 6 piston hidrolik Diameter piston: 70 mm Saklar pengaman – tali tarik darurat Pemanas oli elektrik Berat: 3300 kg Pelapis rak aluminium baru Tahun pembuatan: 2013

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, daya: 110 kW (149,56 hp), Mesin Press Pelet Amandus Kahl C35-780 yang Telah Direkondisi Sepenuhnya. Mesin press pelet C35-780 ini telah direkondisi secara menyeluruh, dengan dokumentasi lengkap semua suku cadang baru yang tersedia, salah satunya ditampilkan pada gambar. Press pelet ini telah direkondisi pada tahun 2024. Lini produksi meliputi: - Mesin Press Pelet Amandus Kahl C35-780 dengan mur hidrolik Godpfjxykzpjx Ag Rouk - Mesin Press Pelet memiliki mesin baru 110 KW - Panel listrik dengan tombol penghenti darurat, termasuk dokumentasi kelistrikan lengkap - 4 cetakan tambahan ukuran 6 mm - 60 liter oli sintetis tambahan Daftar komponen yang telah direkondisi: - 7 bantalan baru - 2 ring aus baru - 1 filter udara baru - 2 seal oli baru - 1 filter oli baru - 1 pompa oli baru - 20 liter oli sintetis 800/460 - 1 dudukan tekanan poros utama baru

Kondisi: seperti baru (mesin pameran), berat keseluruhan: 900 kg, panjang kerja: 2.400 mm, lebar kerja: 1.000 mm, lebar yang dibutuhkan: 3.500 mm, persyaratan ruang panjang: 3.500 mm, tinggi produk (maks.): 90 mm, sambungan udara terkompresi: 12 batang, We are selling a 6-level press for width gluing of wood, gluing dimensions 2400 x 1000 x 90 mm, manual turning. Gedpfx Aot Agh Dog Rjuk Brand new, in stock, immediate delivery.

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 8 h, Good, used demonstration unit. Availability upon agreement Very robust machine with high pressing force – also suitable for producing a saleable briquette quality *depending on material. The large-sized press cylinder and 80 mm briquette facilitate this. Our best-selling briquetting press series + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in use by satisfied customers + Excellent price-performance ratio Surcharge for cooling unit: + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated for longer than about 3.5 hours at a time without a break) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimum briquette stroke: 80 mm Output (material-dependent): up to 200 kg/h* * depending on bulk density * based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm Height: 1,700 mm Weight: 1,250 kg Oil capacity: 220 liters Silo diameter: 1,200 mm Silo volume: approx. 1 cbm Pump: 75 liters Hydraulic pre-compactor Press tongs cooling option: Yes, with special accessory (coolable press tongs) Hydraulic oil cooling option: Yes Cooling for press tongs and hydraulic oil with cooler (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) Enlarged feed slide option: yes, with special accessory (enlarged feed slide) CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and at most 18% - Maximum chip length: 20 mm - Installation temperature: temperature-controlled room, minimum +5°C Gusdpfx Asxfwdog Rek - Feed material must be free from metals and mineral contamination such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result.

Tahun pembuatan: 2025, Kondisi: baru, Exclusively at Columbus: the digital Master Manual, featuring application expertise gained over 45+ years, ensures safe operation of the press. Gsdpfx Ajxu Ec Reg Rsuk Modular system: Vacuum press with flap opening – can be upgraded at any time with a vertical opening mechanism for tall workpieces and improved operability, AND with a heating system for thermoforming plastic panels (such as Corian). Available in 3 different sizes. Austrian, ISO-certified engineering quality, using exclusively brand-name components, guarantees long-term use.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Mesin Press Briket untuk Kayu atau Material Sejenis Kayu Kapasitas: sekitar 80 - 100 kg/jam Briket: silinder 60 mm Motor: 7,5 kW Pemanas oli 6374 jam kerja Dimensi: sekitar 2150 x 1700 x 1400 mm Gujdpfx Aew Hpizeg Rjk Ukuran tangki: 1400 x 1400 x 920 mm Opsional: Unit ekstraksi debu dapat dipasang sebagai hopper tambahan. Persyaratan: Bahan baku sebaiknya berupa serpihan dengan panjang kurang dari 25 mm Kadar air 6-12% ATRO Mesin cocok untuk operasi tidak kontinu (mis. briket selama 2 jam, istirahat 1 jam, dst.) Jika mesin akan dioperasikan lebih dari 2 jam terus menerus, sistem pendingin opsional harus dipasang.

Kondisi: baik (bekas), Used, good condition. Technically inspected used machine Base machine starting from: €139,750 net *Options available at extra cost, see below Delivery time approx. 16 weeks after order Briquetting press, e.g. for wood dust, spelt husks, enrichment material (for example for pigs to play with and chew on), animal feed, alfalfa or wood shavings. *Optional production of short briquette tablets possible Technical data: Throughput rate up to max. 750 kg/h (depending on material) (e.g. sawdust with a bulk density of 250 kg/m³) An exact statement on throughput can only be made after testing with your material, as this may vary significantly depending on bulk density. Customs tariff number: 84793010 Briquette diameter: 65 mm including 2 m press channel Main motor power: 37 kW Feed screw gear motor: 2.2 kW Compactor screw: 5.5 kW Hydraulic pump motor: 0.37 kW Total connected load: approx. 47 kW Control panel with plain text display for operating status and load display for main drive and feed screws PLC control with operating hour counter in switch cabinet Machine bears CE mark Automatic start-stop function Dimensions: 3100 x 860 x 1800 mm (LxWxH) Weight: 3800 kg Options at extra cost: Temperature control unit for press tools For maintaining optimal temperature and briquette quality. Temperature controller for pump, cooling unit, fan, pressure switch. Wired ready for operation – essential for functionality including corresponding control system + €7,850 net Guillotine or tablet breaker, For cutting briquettes to length + €6,900 net Connection to compressed air required! Godpofmqq Eefx Ag Rjuk Silo for MAP series + €19,940 net – Storage silo above machine – Capacity approx. 6 m³, robust steel construction with agitator discharge and level indicator. Transport pipe / cooling section (nominal size: 4x2m) Every 2 meters €990 net Assembly / commissioning (nominal: approx. 2–3 days on site) Billed by time and material. The following rates apply: Service technician/mechatronics per assembly and travel hour: €129.00 Overtime: 25% surcharge Saturday/night hours: 50% surcharge Sunday and holiday hours: 100% surcharge Per diem per technician: depending on country Per car/van and driven kilometer: €0.98 / km Travel and accommodation: reimbursed based on receipts or by flat rate, borne by the client. Testing with customer material: (by arrangement, up to max. 750 kg) – €1,970 net flat rate Requirements for raw material: – Moisture content (atro) must be at least 6% and no more than 15% – Chip length max. 18 mm – Installation temperature: heated space, at least +5°C – Feedstock must be free of metals and mineral impurities. Damage to press tools and/or increased wear may otherwise occur.

Kondisi: baru, Tahun pembuatan: 2026, Production time for the machine is approx. 3.5 months Very robust machine with high pressing force - also suitable for producing a marketable briquette quality* depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Optional features: Surcharge for cooling unit: + €3,995 net (can also be retrofitted later) * Cools the pressing jaw (important for operations over 3.5 hours) and the hydraulic oil * Cooling unit recommended for continuous operation exceeding 3.5 hours at a time. Large pre-compactor chamber: + €1,975 net Recommended for light input materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (material-dependent): up to 110 kg/h* Last test: approx. 87 kg/h *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil capacity: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 cbm Pump: 37 liters Hydraulic pre-compactor Option for cooled pressing jaw: yes, with special accessory cooled pressing jaw Pressing jaw cooling via water tank (to be supplied by customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette strand option: yes (material-dependent) CE compliant Requirements for raw material: Guodpfx Aeffh Ateg Rek - Moisture content (atro) must be at least 6% and no more than 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, jam operasional: 29 h, Another machine immediately available ex works from Neckartailfingen *Interim sale expressly reserved Gjdpfx Agjfhql Te Rouk *Silo available at additional cost Press only available when ordered with a system component - such as a shredder, cutting mill, hammer mill, screw conveyor, belt conveyor with overband magnet, or extraction unit RUF briquetting press for rectangular briquettes Very robust and established machine The ideal machine for professional, industrial briquette vendors. Type Classic – throughput up to 425 kg/h *depending on material Options (subject to additional charge): plant engineering / mütek system technology: - mütek Shredder MRZ size reduction technology - Conveyor belts - Overband magnets - Extraction systems, optionally with rotary airlock - Screw conveyors - Silos - All types of control system integrations - Semi-automatic packaging equipment Your benefits: Key point: + Highly established, mature matrix press thanks to 25 years of experience. The challenge and expertise are in the details, e.g., top-quality installed valves and cylinder seals. + 24/7 operation possible + Long service life + Low maintenance costs + Compact design + High energy efficiency thanks to innovative hydraulics Technical data – Briquetting press: Throughput capacity: up to 425 kg/h* *depending on bulk density of your input material *based on 200 kg per cubic meter bulk density Detailed information after successful testing with your material. If test material cannot be provided, we cannot guarantee briquette quality or throughput capacity. Briquette dimensions: 150 x 60 mm Briquette length: 40 to 105 mm (adjustable) Hydraulic pre-compactor Hydraulic main compactor Pressing force: approx. 1,700 kg/cm² Hydraulic system with 260-liter oil tank Pump motor: 30 kW / 400V / 50Hz / 3 phase Manual operation for all cylinders Control cabinet "dust-protected" with PLC control and touch display Total power consumption of the briquetting press: approx. 33 kW Requirements for raw material: - The moisture content (atro) must be at least 6% and max. 15% - Maximum chip size: 20 x 2 x 2 mm - Ambient installation temperature: min. +8°C - Feed material must be free from metals and mineral contaminants such as sand, stones, etc. Damage to press tools and/or increased wear may result.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, Machine for special price - available immediately Another machine available immediately (ex works Neckartailfingen) * Includes 1-year warranty. Your advantages: + Very robust, straightforward technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-established and reliable machine Including control cabinet with timer operation: The press is switched on manually and runs for the set timer duration (e.g. 4 hours), then switches off automatically. Technical data: Briquette dimensions: approx. 30 x 30 mm (square) Briquette length: 5–40 mm (material-dependent) Throughput capacity: up to max. 20 kg/h (material-dependent) Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Raw material requirements: - Wood chips and dust less than 15 mm in length - Moisture content less than 18% (ATRO) - Sand, stones, metals, and mineral content will increase wear --- Options at extra cost: - Timer function + €490 net The machine is started manually and switches off automatically after the preset time. - Level sensor for automatic operation + €1,450 net The press starts and stops automatically Guedpfx Aged Nnwlj Rok * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €890 net (delivery time then approx. 8 weeks) - Special pressing dies + €2,950 net ---

Kondisi: baik (bekas), refurbished_used_machine basic_machine_starts_at_a_price_of_147700_euros_net *Options_available_at_extra_cost_see_below with_full_1_year_warranty ready_for_delivery_approx_16_weeks_after_order Technical_data: Throughput_capacity_up_to_a_maximum_of_1200_kg/h_(depending_on_m aterial) (e.g._sawdust_with_a_bulk_density_of_180_kg/cbm) Briquette_diameter:_75_mm including_2_m_press_channel Main_motor_power:_45_kw Feed_screw_gear_motor:_2_x_2.2_kw Compressor_screw:_2_x_5.5_kw Distributor_screw:_2.2_kw Hydraulic_pump_motor:_0.37_kw Total_connected_load:_65_kw Control_panel_with_plain_text_display_for_operating_states and_load_display_for_main_drive_and_feed_screws PLC_control_Siemens_S7/300_with_operating_hours_counter_in_contr ol_cabinet Machine_has_CE_mark Automatic_start/stop_function_for_the_machine Dimensions:_3100x860x1800_mm_(LxWxH) Weight:_4500_kg Options: Silo_for_MAP_series_(suitable_only_for_one_press_of_type_MAP_120 0) -Storage_silo_above_the_machine- Capacity:_approx_6_cbm,_solid_steel_construction_with_agitator_d ischarge_and_level_sensor. 19,700_euros_net_plus_VAT -Temperature_control_unit_for_press_tools for_maintaining_temperature_for_optimal_briquette_quality. Temperature_controller_for_pump,_cooling_unit,_fan,_pressure_swi tch Wired_ready_to_connect_-_mandatory_for_operation including_matching_control_unit 7,850_euros_net -Guillotine_for_cutting_briquettes_to_length Compressed_air_connection_on_site_required 6,940_euros_net_plus_VAT -Conveying_line_/_cooling_section_(nominal_value:_4x2m) Per_2_meters:_990_euros_net Installation_/_commissioning_(nominal_value_per_press:~2-3_days_ on_site) Based_on_actual_hours,_separately_billed._The_following_rates_ap ply: Service_technician/mechatronics_per_installation_and_travel_hour :_129.00_euros Overtime:_25%_surcharge Saturday_and_night_hours:_50%_surcharge Sunday_and_public_holiday_hours:_100%_surcharge Daily_allowance_per_fitter:_depending_on_country Per_car/van_kilometer:_0.98_euros/km Travel_and_accommodation_on_receipts_or_flat-rate_to_be_borne_by _the_customer. Test_with_customer's_own_material:_(by_arrangement,_up_to_max_75 0_kg)_-_1,970_euros_net_fixed Guedps E Dquofx Ag Rjk ---- Raw_material_requirements: - Moisture_content_(atro):_minimum_6%_to_maximum_18% - Maximum_chip_length:_20_mm - Installation_temperature:_heated_room_at_least_+5°C - Feed_must_be_free_of_metals_and_mineral_contaminants._Damage_to_ press_tools_and/or_increased_wear_may_result.

Kondisi: baik (bekas), Tahun pembuatan: 2001, Good, used condition Few operating hours (1,675 h) Motor: 11 kW Throughput: up to max. 220 kg/h Briquette size: 150x60 mm Guodpfx Agjwcc D Re Rok Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: approx. 500x1250x2120 mm (LxWxH) Weight: approx. 3,000 kg