Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 3.000 mm, panjang umpan sumbu Y: 1.500 mm, Slightly used ORMA MEMBRANE PRESS, model DUPLEX 30/15 vacuum press with preheating oven/table for acrylic and thermoplastics. Has only seen occasional light project use. Suitable, for example, for machining Corian sheets. An alternative to a new machine. Pressing area: 3000 x 1500 mm Vacuum pressing force over the entire working area: 44 tons 11 tons/m² Max pressing height of the workpiece: 500 mm ORMA HEATING OVEN/TABLE 30/15 FOR ACRYLIC AND THERMOPLASTICS • Heated by electric resistance and air circulation • Heated area: 3000 x 1500 mm • Max height of heated workpiece: 100 mm • Heating power: 18 kW • Maximum temperature: 200°C • Temperature digitally adjustable from the control panel The device frame is a welded heavy-duty steel beam construction with welded steel plates. There is an insulation layer between the galvanized steel plates of the oven’s inner and outer surfaces. The heating oven opens manually, guided by rails, and is equipped with transfer wheels. The membrane press table is made of phenol-coated plywood, grooved for improved vacuum distribution. The upper table, where the membrane film is mounted, opens 45 degrees and is fitted with gas struts. The upper table has fast and easy locking. Manual quick-mount system for membrane film. Vacuum system with a single 25 m³/h vacuum pump. Control panel mounted at the left end of the machine includes: • Main switch Guodpfx Agjxz Rhfs Rjk • Control indicator lamp • Emergency Stop push button • Temperature monitoring/adjustment • Vacuum pump status indicator (on/off) • Heating system status indicator (on/off)

Kondisi: bekas, Tahun pembuatan: 2003, Tinggi kerja 2300 mm, lebar kerja 3500 mm, motor 1,5 kW. 3 silinder penekan dari atas, 2 dari samping. Tekanan silinder per silinder: 3000 kg. Langkah silinder tekan hingga 200 mm. Hidrolik: 10-150 bar. Kebutuhan ruang: 3950 x 900 x 2550 mm. Berat: 670 kg. Lokasi penyimpanan: Nattheim. Guodpfx Asvvkmbjg Rsk

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Device description Pump motor power - 1.35 kW 10 hydraulic pressing cylinders - spring return Gujdpovy Uqfefx Ag Rok 17 top hydraulic cylinders for beam pressing Maximum working dimensions 7 x 1.5 m

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, Dijual: Lini pengepakan briket RUF yang dibuat tahun 2017 oleh Koch Robotersysteme. Sistem dapat menghubungkan hingga 9 mesin briket RUF R600. Kapasitas pengepakan: 4,5-5 ton/jam. Harga saat ini sekitar 400.000 euro, yaitu 50% dari nilai baru, tanpa mesin briket. Mesin briket RUF ditawarkan pada lelang terpisah. Gedpex Ap Rusfx Ag Reuk

Kondisi: sangat baik (bekas), hess-korpuspresse-export Gsdpfsxgvwpsx Ag Rjuk

Kondisi: bekas, Tahun pembuatan: 1992, Dimensi: 5700 x 1300 x 2400 mm Lokasi penyimpanan: Nattheim Guedpfovvkl Dsx Ag Rok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 23.666 h, Fungsionalitas: berfungsi sepenuhnya, Mesin Briket RUF Lignum R6 Tahun produksi: 08/2019 Jam operasi: 23.000 mth Harga: 49.000,00 EURO + PPN Kami memiliki 7 mesin briket RUF untuk dijual: Lignum R6 2019, jam kerja 23.000mth, harga net: 49.000 euro Lignum R6 2019, jam kerja 23.000mth, harga net: 49.000 euro Lignum R6 2019, jam kerja 6.800mth, harga net: 59.000 euro Lignum R4 2021, jam kerja 13.000mth, harga net: 59.000 euro Gsdpfjx Ap Iyex Ag Reuk Lignum R4 2021, jam kerja 13.000mth, harga net: 59.000 euro Lignum R4 2021, jam kerja 12.000mth, harga net: 59.000 euro Lignum R4 2021, jam kerja 12.000mth, harga net: 59.000 euro Sistem pengemasan briket otomatis tersedia di penawaran lain.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, LAMELLA FRAME PRESS GANNOMAT «CONCEPT 70 ECO» Complete in standard configuration with: - Sturdy, distortion-free frame made of steel, welded and bolted construction - Top lamella press beam with 6 elements, side lamella press beam with 5 elements - Lamella press beams equipped with the proven Ganner tolerance compensation system for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical press beam - Motorized adjustment of both press beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance sliding nuts with grease reservoir - Pressing is performed electrically by 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of the press beams is infinitely variable electronically via 2 potentiometers and controlled by a frequency inverter, resulting in an absolutely wear-free press force control - Pressing force for horizontal press beam minimum 500 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) Pressing force for vertical press beam minimum 300 daN (kg) up to infinitely adjustable maximum 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning via 3-stage selector switch: 5 / 10 / 25 mm/sec - Extremely simple operation - Working/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm Gusdpew Td A Ijfx Ag Rek - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for working height 500 mm Operating manual in German Fully overhauled by Ganner, spare parts warranty: 6 months Location: ex stock 54634 Bitburg - immediately available -

Tahun pembuatan: 2008, Kondisi: sangat baik (bekas), Electric heating rod Impact- and shock-resistant heating cartridge system with heating conductors hermetically embedded in silicone. No wear, no corrosion, operational safety even during continuous use and under impacts and vibrations. Temperature adjustment via integrated controller with insulated adjustment knob. Permanently attached industrial cable, no failure-prone plug connections. High-strength special aluminum profile for high load capacity and fully flat pressing surfaces. Standard version with gold-anodized finish—scratch and abrasion resistant, easy to clean. Size/Type: EST 21 Length: 2100 mm Connection power: 1100 W, 230 V Guedpfxslcd Szj Ag Rjk Temperature: 0 / 40 / 70 / 100 / 170 / 200 °C Location: ex stock 54634 Bitburg - Immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, new hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold-anodized plates Touch display control - Electric heating plates: 3,000 x 1,300 mm - Total pressing force: 90 tons - Number of heating plates: 2 pcs - Number of openings (daylights): 1 - Cylinder stroke: 350 mm - Daylight opening: 350 mm - Accessible from all sides - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic unit power requirement: 3 kW - Electric heating plates made of solid hard aluminum with embedded heating wires - Heating capacity: 22 kW - High-pressure insulation plates - Working temperature: 90°C Gsdpfxedx R Tfe Ag Rsuk - Max. temperature: 120°C - Operating voltage: 400 V/50 Hz - Safety standards compliant with CE regulations Standard equipment: - Press table movement with rack-and-pinion and parallel guides at two corners, made of self-lubricating material - Electronic control unit with touch screen for machine operation and monitoring - Digital timer for setting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for setting pressing time - Digital diagnostics and fault display - Safety circuit with two-hand operation - Emergency safety cable - Safety stop for lower press table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating plates (Busse) Location: Available ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2024, en-001 Godpfx Agjlht H Ej Rjuk

Tahun pembuatan: 2025, Kondisi: baru, Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane Godpfx Aged Ecc To Rouk External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: ex stock 54634 Bitburg - loaded, free of charge -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Laminated Case Clamp GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Carcase joints. - Counterpressure surfaces (side pressure wall, base) consist of 40 mm thick, coated, continuous support plates - Electromechanical adjustment of both pressing beams via precision trapezoidal threaded spindle (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir. - Pressing operation is electromechanical, via 2 separate worm gear motors (2 x 0.75 kW) - Pressing force of 2000 daN (kg) per pressing beam. - The pressing force of the pressing beam is electronically controlled and set via frequency inverter, therefore a completely wear-free torque transmission. - Pressing and adjustment speed: 25 mm/sec. - User-friendly operation via 6 separate push buttons, 6 motion sequences selectable via controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 minutes (switchable to seconds or hours). - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm Height min: 150 mm, max: 1400 mm Depth: 700 mm - 1 rotary switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) - Machine no. 380.324 - 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Gsdpfx Asw Tdymsg Rjuk Set of machine feet for working height 500 mm Machine condition: Used Year of construction: 2013, completely overhauled by Ganner, parts warranty 6 months Special price: ex stock 54634 Bitburg - Immediately available -

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en-1 Gjdpfx Agob Eln Dj Rjuk

Kondisi: baru, Tahun pembuatan: 2025, Surface - Case Clamp GANNOMAT "CONCEPT 70 EASY 170" Complete in standard version with: - Sturdy, torsion-free steel frame, constructed with a combination of welded and bolted joints - SIDE press beam with continuous pressure surface and 25 mm thick, coated support plate - Counterpressure surface (side pressure wall, base) consists of 25 mm thick, coated, continuous support plates Gsdpew Sgnkjfx Ag Rouk - Electromechanical adjustment of the press beam via precision trapezoidal-thread spindles (with enhanced pitch and concentricity accuracy) and heavy-duty running nuts with grease reservoir - Pressing is performed electromotively via worm gear motor (0.75 kW) - The pressing force of the press beam is continuously adjustable electronically via potentiometer and controlled by frequency inverter, which ensures completely wear-free press force regulation - Pressing force for vertical press beam min. 300 daN (kg) up to infinitely adjustable max. 2200 daN (kg) - Pressing and adjustment speed of the press beams with fine positioning, selectable via 3-step switch 5 / 10 / 25 mm/second - Jog mode for precise positioning of the press beam, e.g., for low pressing forces such as drawer assembly - Simplified operation via 2 separate pushbuttons; 2 movement cycles (open/close) can be selected via control system - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of both press beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz 16 A Availability: short notice

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 1 h, Special promotional price as this unit was demonstrated at our in-house exhibition. Operating hours: 1 Available immediately – subject to prior sale Once it’s gone, it’s gone! Compact design, high reliability, and excellent value for money: these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Special feature: screw pre-compaction, which guarantees high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Guodpfx Aotnz Ttsg Rok Overall dimensions: 1900 x 1410 mm Hopper opening: 1044 x 1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil capacity (l): 100 Weight (kg): 530 Equipment: Press - High-performance press mechanism with low-wear, chrome-plated tongs - Pre-compactor with end-position damped cylinder and bolted cover - Control cabinet with PLC control system Hydraulics - Separate oil tank with pump motor and valve control - Safety switch for oil temperature Container with agitator and geared motor Screw channel with discharge screw and geared motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Vacuum membrane press VPR-3500 is a versatile press designed for woodworking and thermoforming applications. The VPR-3500 press is both tiltable and mobile. Possible applications: Veneering / form gluing / wrapping... Lamination of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Work surface equipped with vacuum channels ensures uniform negative pressure, even with large workpieces. Becker vacuum pump / oil-free / tank capacity: 100 l Working area: 3500 x 1500 mm Motor power: 0.75 kW Vacuum pump capacity: 40 m³/h Rubber membrane External dimensions: 3600 x 1650 x 1000 mm Weight: 400 kg Location: ex stock 54634 Bitburg - loaded, free of charge - Gsdpfedvldaex Ag Rsuk

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Vacuum Membrane Press The VP Series offers the optimal solution for woodworking applications. The VP 3000 is equipped with a heating system, which shortens the adhesive drying time, thereby increasing productivity. Applications: - Veneering / Form bonding / Wrapping - Coating of various profiles (veneer, paper, plastic, etc.) - Wood bending: Production of curved and laminated components The heating system comes with temperature regulation. Rubber membrane: 2.5 mm Tabletop: 12 mm plastic Oil-free Becker vacuum pump, 25 m³/h Vacuum control system / tank capacity: 15 l Working area: 3000 x 1500 mm Heating system temperature: max. 60°C Heating power: 4.5 kW Pump output: 0.75 kW Gusdpfxsdvltyj Ag Rek Vacuum pump delivery rate: 25 m³/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Location: Ex stock 54634 Bitburg - loaded free of charge -

Kondisi: baru, Tahun pembuatan: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for operations requiring throughput rates of up to 150 kg/h. The robust press housing enables the production of high-density briquettes from materials such as wood, polystyrene, foam materials, light metals, paper, or biomass. Numerous additional options are available, such as an oil cooler for multi-shift operation. All machines are available in left- or right-hand configurations. Installation on a solid base frame ensures rapid setup and allows for mobile use. Gsdpoil Hggjfx Ag Reuk User-friendly operation thanks to Siemens PLC control To fulfill our performance promise, all control cabinets are designed and manufactured in-house at our Ilsfeld facility and equipped with high-quality international components. This guarantees top quality with a compact design. The Siemens PLC used is perfectly tailored to the requirements of the briquetting process. Contaminant-resistant feed screw via cardanic suspension The feed screw, which conveys the material into the pre-compressor of the briquetting press, is suspended by a cardan joint. This prevents contaminants from causing damage to the feed screw. As always, the specific application dictates the appropriate suspension. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Hydraulic motor (kW): 11 Oil volume (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Kondisi: baru, Tahun pembuatan: 2024, Your advantages Stable pressing mechanism with low-wear, chrome-plated clamp Wear-resistant pressing chamber sleeve Pre-compressor with end-position damped cylinder and bolted lid Control cabinet with PLC control system Gsdjcnz U Ejpfx Ag Rjuk Screw channel with discharge auger Separate oil tank with pump motor and valve control Safety switch for oil temperature Mounted on a stable base frame with rubber feet Briquette length monitoring Robust construction, low-maintenance technology, minimal space requirements: The machines of the C series are especially suitable for small and medium-sized businesses whose required throughput does not exceed 50-80 kg/h or 200 to 400 kg/day. Virtually any suitable material can be briquetted, such as wood, polystyrene, foam materials, paper, or biomass. All machines are available in left-hand or right-hand versions. Mounting on a stable base frame ensures quick installation and enables mobile use. Briquette diameter (mm): 50 Max. throughput (kg/h): 50 (material-dependent) Hydraulic motor (kW): 5.5 Auger motor (kW): 0.55 Oil volume (liters): 100 Weight (approx. kg): 800 Outstanding features at a glance Hydraulics with separate oil tank: Temperature-monitored hydraulic unit, complete valve control, pump motor for long operating times Briquette length monitoring: Regulates briquette length to a consistent size Press chamber wear sleeve: Prevents wear in the pressing area Location: Ex works - free loaded

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, New hydraulic heating platen press Manufacturer: ITALPRESSE, Model XL/6 30-13 with gold-anodized platens Touch display control - Electric heating platens 3,000 x 1,300 mm - Total pressure 90 tons - Number of heating platens: 2 pcs - Number of levels: 1 pc - Cylinder stroke: 350 mm - Level opening: 350 mm - Four-sided loading - Number of hydraulic cylinders: 6 pcs - Cylinder diameter: 85 mm - Hydraulic power unit requirement: 3 kW - Electric heating platens made of solid hard aluminium with integrated heating wires - Heating capacity: 22 kW - High-pressure insulation panels - Operating temperature: 90° C - Maximum temperature: 120° C - Operating voltage: 400 V / 50 Hz - Safety standards according to CE regulations Standard features: - Movement of the press table via rack and parallel guides at 2 corners of the press table, made of self-lubricating material - Electronic control unit with touch screen for machine operation and monitoring - Digital timer for setting pressing time and automatic opening - Digital input and monitoring of pressing pressure - Digital timer for setting pressing time - Digital diagnostics and fault display Gedpfx Agoxgbxfj Reuk - Safety circuit with two-hand operation - Safety pull cord - Safety holder for lower press table Integrated accessories: - Touch Screen TS/400 - EFC electronic flatness control - Gold-anodized heating platens (bus panels) Location: Ex works - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Gannomat Concept 70 Eco Lamella-Type Case Clamp with Rapid Traverse Technical Data: Lamella-type case clamp from our showroom; Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are continuous support plates, 40 mm thick and coated - The pressing force of the pressure beams is infinitely variable via 2 potentiometers and set electronically using a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely variable max. 2200 daN (kg) Gjdoiidm Njpfx Ag Rjuk - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg) - Options included: Rapid traverse speed function for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds of 5/10/25 mm/sec, and rapid traverse speed of 50 mm/sec. Sensors can be deactivated for pressing special components. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree cabinets. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm The machine is on display in our showroom and can be delivered immediately. Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, jam operasional: 1 h, en-001 Godpfotnz Hbjx Ag Rjuk

Tahun pembuatan: 2025, Kondisi: seperti baru (mesin pameran), Vacuum membrane press The VP Series offers optimal solutions for woodworking applications. The VP 3000 is equipped with an integrated heating system, which shortens glue drying times to increase overall productivity. Gedpfx Asdwh E Aog Rouk Possible applications: - Veneering / Form laminating / Wrapping - Coating of various profiles (veneer, paper, plastic, etc.) - Wood bending: Fabrication of curved and laminated components Features: - Heating system with adjustable temperature control - 2.5 mm rubber membrane - 12 mm plastic worktable - Oil-free Becker vacuum pump, 25 m³/h - Vacuum control system / Tank capacity: 15 l Working area: 3000 x 1500 mm Heating system temperature: max. 60° C Heating power: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m³/h Rubber membrane Overall dimensions (LxWxH): 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a mobile chassis. Location: Ex stock 54634 Bitburg – Loaded free of charge –

Kondisi: baru, Tahun pembuatan: 2024, Compact design, high reliability, and an excellent price-performance ratio – these are the advantages of this machine, which is perfectly suited for briquetting materials such as wood, polystyrene, foam, or paper. Unique feature: the screw pre-compaction system, which guarantees a high briquette quality. For quick and easy installation, the C 140 is mounted on a stable base frame. Overall dimensions: 1900 x 1410 mm Hopper opening: 1044x1044 mm Hopper height: 1010 mm Hopper volume: 1.1 m³ Drive power: 4 kW Briquette diameter (mm): 40 Throughput capacity (kg/h): 30-40 Hydraulic oil volume (l): 100 Weight (kg): 530 Equipment: Press High-performance pressing mechanism with low-wear, chrome-plated clamp Pre-compactor with end-position damped cylinder and bolted cover Control cabinet with PLC control Hydraulics Separate oil tank with pump motor and valve control Oil temperature safety switch Container with agitator and geared motor Screw channel with discharge screw and geared motor Accessories: Briquette length monitoring Automatic on/off Location: 54634 Bitburg Godpfjbtnf Eex Ag Rsuk