Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 2.320 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 720 mm, tinggi bal: 1.100 mm, berat keseluruhan: 12.500 kg, kapasitas tangki oli: 800 l, daya: 37 kW (50,31 hp), Technical Data – Baler: Manufacturer: Riko Ekos d.o.o Model: S-60K (6) Year of manufacture: 2019 Operating hours: 2,320 hours (as of August 2024) Number of bales pressed: 4,359 (as of August 2024) Main press force: 60 t Feed hopper dimensions: 1,100 x 1,400 mm Filling volume / press cycle: 2.1 m³ Bale dimensions: 720 x 1,100 mm (W x H), length variable Drive power: 37 kW Total connected load: 47 kW Tying: 4-fold horizontal, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: approx. 5–6 t/h - 50 kg/m³: approx. 9–11 t/h - 100 kg/m³: approx. 15–19 t/h Hydraulic oil tank capacity: 800 L PLC control: Siemens SIMATIC S7-1200 Operator panel: Siemens SIMATIC HMI Machine dimensions (assembled, without hopper and chute): 12,220 x 3,654 x 2,685 mm (L x W x H) Effective transport dimensions (press only, with tying system dismounted): 7,230 x 1,750 x 2,685 mm (L x W x H) Transport weight: 12.5 t Condition of the baler: The machine is part of a sorting plant and was only partially used for compressing certain material streams. It is now surplus to requirements and is therefore being sold. The baler is, however, operated once per week for two to three bales to ensure it stays functional. Due to the extremely low operating hours, the baler is in good, immediately operational condition. Hnodeu Thipepfx Adqeu Scope of delivery: - 1 unit baler without conveyor belt, hopper, and chute - 8 units wire feed stations, without wire - 1 unit bale chute - 1 set of machine documentation Remarks: The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is complete. Inspection is possible by appointment. We accept no liability for technical data or potential errors.

Kondisi: baik (bekas), Tahun pembuatan: 2019, jam operasional: 1.022 h, Fungsionalitas: berfungsi sepenuhnya, Baler Presto CC 20 M, year of manufacture 2019, pressing force 20 t, with retention device. Technical Data: Manufacturer: Presto Model: CC 20 M Year of manufacture: 2019 Operating hours: 1022 Pressing force: 20 t Cycle time: 24 s Drive power: 7.5 kW Feed opening: 1030 x 750 mm Filling volume: 0.53 m³ Tying: 3-fold, manual Throughput (at bulk densities of): 35 kg/m³ - 1.6 t Hnedpfx Adjxfh H Hsqju 60 kg/m³ - 2.3 t 100 kg/m³ - 2.8 t Bale dimensions: 700 x 750 mm Bale weight: up to 300 kg Dimensions: 3300 x 1235 x 1860 mm (LxWxH) Machine weight: approx. 2500 kg Materials: Paper, cardboard, film Remarks: The machine is in good condition. It has been inspected and tested at our location in 28816 Stuhr. A video can be found on our website or YouTube channel. Viewings, including under power, are possible at any time by arrangement. On request, we can also perform tests with your material for a handling fee. We are happy to answer any questions regarding the machine by phone from Monday to Thursday, 8:00 am to 2:00 pm, and on Friday from 8:00 am to 1:00 pm. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information or for any errors that may occur. Offers are subject to change and prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale is ex works, without warranty or guarantee.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 50 t, Baler Bramidan B50 berfungsi penuh, sudah diservis, set lengkap - kait, rol tali pengikat. Hsdpfxjxg Tk Te Adqjnu

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Brand: DIXI Model: 60 S Year of manufacture: 2012 Pressing force: 60t Voltage: 400 V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm wide x 80 cm deep x 55 cm high Condition: Excellent! Functionality checked. FLITS Rental & Sales service: Each machine comes with a pack of binding wire (120 wires). Need additional bundles of binding wire? Request a non-binding quote. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We focus on providing efficient solutions for internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find a wide range of machines suitable for use in various sectors. Be sure to check our advertisements for: waste compactors for efficient waste processing, electric pallet trucks/stackers for fast and safe internal transport, floor scrubbers for thorough and professional floor cleaning, forklifts in various models suitable for diverse work environments. With FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine as quickly as possible. Visit our location Hjdpfx Aexlgx Ujdqsnu You are welcome to view the machines on-site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to provide you with detailed information and show you the right machines. Contact Do you have any questions or would you like a non-binding quote? Please feel free to contact us: We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing DIXI

Kondisi: baik (bekas), - Lubang pengisian besar, ideal untuk kotak berukuran besar - Dump truck kontainer untuk pengisian yang nyaman Gaya dalam kN: 400 Panjang bal: 1.100 mm Lebar bal: 750 mm Tinggi bal: 750 mm Panjang mesin press: 5.640 mm Lebar mesin press: 1.674 mm Tinggi mesin press: 2.500 mm Berat: 4.450 kg Hnedpfev Amv Eox Adqou - Daya motor dalam kW: 9 - Tegangan/frekuensi: 3 x 400 V / 50 Hz - Berat bal dalam kg (tergantung material): hingga 350 kg - Pengikatan manual: 3 kali dengan kawat Tahun pembuatan: 2013 Mesin press baling HSM HL 4010 LI - Lubang pengisian besar, ideal untuk kotak berukuran besar - Dump truck kontainer untuk pengisian yang nyaman Gaya dalam kN: 400 - Daya motor dalam kW: 9,5 - Tegangan/frekuensi: 3 x 400 V / 50 Hz - Berat bal dalam kg (tergantung material): hingga 350 kg - Pengikatan manual: 3 kali dengan kawat Tahun pembuatan: 2012

Kondisi: bekas, Tahun pembuatan: 2022, lebar total: 950 mm, tinggi total: 1.250 mm, panjang total: 1.800 mm, agro-0401 Hnjdpfx Ajxd Rfisdqsu

Kondisi: sangat baik (bekas), jam operasional: 2.658 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 71 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.620 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 600 kg, arus masuk: 200 A, kapasitas tangki oli: 1.250 l, berat kosong: 29.000 kg, Technical Data – Baler: Manufacturer: BOA Recycling Systems B.V. Model: Impress M75-45-A-5-1.6 Ecoline Year of manufacture: 2021 Operating hours: 2,658 hours (as of May 2024) Number of bales produced: 42,212 units (as of May 2024) Main press force: 71.2 kN (71 t) Specific compaction pressure: 9 kg/cm² Operating pressure: 280 bar Cylinder stroke: 2,200 mm Charge box dimensions: 1,620 x 1,000 mm Filling volume per press cycle: 2.4 m³ Theoretical cycle time: 21 seconds Theoretical throughput: 450 m³/hour Bale dimensions: 1,100 x 720 mm; length adjustable up to 1,400 mm Drive power: 45 kW Connected load: 100 kW Current consumption: 200 A Tying: 5-fold vertical, fully automatic; ram pre-equipped for additional 3-fold horizontal tying Hodou Thcvspfx Adqonu Throughput rates at bulk densities of: – 30 kg/m³: approx. 13.6 t/hour – 60 kg/m³: approx. 24.2 t/hour – 100 kg/m³: approx. 36.4 t/hour – 150 kg/m³: approx. 54.7 t/hour Bale weight: up to 600 kg, depending on material Hydraulic oil tank capacity: 1,250 L PLC control: Siemens S7 1500 Operator panel: Siemens SIMATIC HMI TOUCH Transport dimensions (Baler): 10,000 x 2,800 x 3,385 mm (L x W x H) Baler height (assembled with feed chute): 4,743 mm Baler height (assembled with conveyor): 7,123 mm Machine weight (Baler): 29 t Noise level:

Kondisi: baik (bekas), Tahun pembuatan: 2015, jam operasional: 1.932 h, Fungsionalitas: berfungsi sepenuhnya, Baling Press Presto CC 50 M, semi-automatic, year of manufacture 2015, pressing force 50 t, with lifting-tilting device Technical Data: Manufacturer: Presto Model: CC 50 M Year of manufacture: 2015 Operating hours: 1,932 Pressing force: 50 t Cycle time: 52 s Drive power: 7.5 kW Filling opening: 1030 x 1100 mm Filling volume: 0.85 m³ Tying: 3-fold, wire, manual Throughput capacity at bulk densities of Hnjdpfx Adsxfh Htsqsu 35 kg/m³ – 1.3 t 60 kg/m³ – 1.7 t 100 kg/m³ – 2.2 t Bale dimensions: 750 x 1100 mm Bale weight: 300 kg Dimensions: 4705 x 1680 x 2540 mm (LxWxH) Machine weight: approx. 4,000 kg Materials: Paper, cardboard, film Operating manual available in German. Note: The machine is in good condition. It has been inspected and tested at our site in 28816 Stuhr. The video can be found on our website or YouTube channel. Inspections, including under power, are possible by appointment at any time. On request, we can also perform tests with your material for a handling fee. We are happy to answer any questions regarding the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data are based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is non-binding, subject to prior sale, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Fungsionalitas: berfungsi sepenuhnya, Amis ZBP 50 S Duo sawdust briquetting machine Year of manufacture: 2019 Load capacity depending on material: up to 140 kg 3,800 operating hours Briquette diameter: 50 mm Tank capacity: 1.2 m³ Roller with feeder Pre-pressing Screw conveyor Hedpeumwm Sefx Adqenu Hydraulic pump motors, each 7.5 kW Fan cooling Sawdust level sensor in the tank Hydraulic oil tank: 100 l SIEMENS control system Dimensions (L x W x H): 3,000 x 2,400 x 1,700 mm Weight: 2,000 kg Price of new machine: 39,800 EUR

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 48 t, panjang bal: 1.200 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 550 kg, lebar total: 2.583 mm, tinggi total: 3.994 mm, panjang total: 6.661 mm, tegangan masuk: 400 V, berat keseluruhan: 12.000 kg, kapasitas tangki oli: 300 l, en-HSM VK 4812 P Year of manufacture: 2015 Fully automatic baler. The machine has undergone servicing and maintenance by an authorized HSM Service Center based in Germany. The baler is delivered complete with a ramp for ejecting finished bales and wire stand holders. Pressing force: 480 kN Drive power: 18 kW Voltage/Frequency: 400V/50Hz Throughput at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Overall length x width x height: 6661 x 3994 x 2583 mm Machine weight: 10.2 t Compacted materials: film, mixed paper, cardboard, punching waste Bale tying: 4-fold with wire Hsdpfx Adjxhd Rtoqjnu We also have other balers in stock. Transport costs depend on weight, volume, and above all, distance. For inquiries, please provide the following details: delivery address (postal code and city), however, further details require a phone conversation. Please inquire by phone regarding transport costs and other shipping methods. Our contact information can be found in the seller’s legal notice. We sell and export worldwide and, thanks to our very large storage capacity, can supply larger quantities flexibly and at short notice. We issue intra-community invoices – VAT exempt. Business hours Mon-Fri: 8:00-16:00 Sat: closed

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, Mesin press kertas/limbah JONGEJANS model: DBF145_00_h00004 Hodpfx Adjxk N Dwoqonu Jumlah filter: 84 Felt jarum poliester Luas permukaan filter: 145 m² Komponen yang terpasang: Mesin press briket CS3-12 Kipas pembersih 1,5 kW

Kondisi: baik (bekas), Manufacturer: Comp Model: SB5 Motor: 2.2 kW Piston stroke: 500 mm Chamber dimensions: 500 x 350 x 400 mm Hedpfxsh Eic Aj Adqsnu

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, arus masuk: 238 A, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Hnjdjvf E Avepfx Adqsu Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: baik (bekas), Tahun pembuatan: 2016, jam operasional: 2.074 h, Fungsionalitas: berfungsi sepenuhnya, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Year of manufacture: 2016 Operating hours: 2074 Pressing force: 55 t Drive power: 4 kW Cycle time (idling): 25 s Filling height: 1115 mm Feed opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Hnedpfx Adsxfh Dlsqeu Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, cartons, films, plastics, PET The operating manual and EC Declaration of Conformity are available in German. Remarks: The machine is in very good condition. It has been inspected and tested at our facility in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewings, including under power, are possible at any time by appointment. On request, we can also carry out tests with your material for a service charge. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Please note: All technical data is based on manufacturer’s information. We accept no liability for the details provided or potential errors. Offers are subject to prior sale, non-binding, and may be withdrawn at any time. Viewings are available by appointment. Sale is ex works, without warranty or guarantee.

Kondisi: bekas, Tahun pembuatan: 2004, Perangkat dalam kondisi kerja. Hodpfx Adsw Tbfgeqonu

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, DIXI 80 SLD Horizontal Press Sistem press semi-otomatis dengan tekanan 80 ton untuk pengurangan volume limbah (dapat didaur ulang) secara ekonomis di industri dan perdagangan: Karton Tetrapak Film plastik Busa Botol PET Mat isolasi dan bahan lain yang dapat dikompresi. Daya tekan: 80 t Sambungan listrik: 400 V 50 Hz; 11 kW; D-32 A (Opsi: K-32 A) Waktu siklus – rata-rata sekitar: 35 detik Panjang sekitar: 4.320 mm (tanpa perangkat pengangkat dan palet) Lebar sekitar: 1.830 mm Tinggi sekitar: 1.830 mm : 2.620 mm (dengan hopper) Bukaan pengisian (L x D) – bodi: 1.040 x 1.110 mm Dimensi bale: 1.120 x 1.120 x 1.200 mm Berat bale sekitar: 500–600 kg Pengikatan: 4 kawat manual dengan pengait cepat Hnedoxg Iquspfx Adqsu Berat mesin sekitar 8.000 kg (tanpa bale)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, gaya penekanan: 54 t, lebar bukaan pengisian: 1.195 mm, panjang bukaan pengisian: 650 mm, panjang bal: 1.200 mm, lebar bal: 1.200 mm, tinggi bal: 1.100 mm, berat bal: 550 kg, lebar total: 1.780 mm, tinggi total: 2.985 mm, panjang total: 1.568 mm, berat keseluruhan: 2.403 kg, nl-hu-01 Hnedpfxsxhg Dvo Adqou

Kondisi: bekas, Tahun pembuatan: 2011, nomor mesin/kendaraan: 340000674, The HSM baling press V-Press 403 is a compact solution for the efficient compaction of waste and recyclable materials. This used press delivers outstanding performance and is ideal for businesses looking to optimize their waste management and save space. With its robust construction and user-friendly operation, it is perfectly suited for use across various sectors. Hnsdpfx Ajunzn Njdqju Technical specifications: Machine No.: 6113.114 Serial number: 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Motor output: 1.1 kW Rated current: 2.6 A Year of manufacture: 2011 Weight: approx. 300 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2019, jam operasional: 3.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 9.500 kg, lebar bukaan pengisian: 420 mm, panjang bukaan pengisian: 1.250 mm, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Hjdpfx Aou Th S Sodqonu Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Feed opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depending on material Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Throughput capacity for empty beverage cans with: • One press stroke: approx. 1.7 t/h • Two press strokes: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions assembled: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press chamber made of wear-resistant S355 steel Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel plate, as well as aluminum, brass and copper scrap. Condition of baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition and is sold with a 12-month OBM parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic wiring diagram). Inspection by appointment is possible. We assume no liability for technical data or possible errors.

Kondisi: bekas, Tahun pembuatan: 2020, Kami menawarkan langsung dan atas nama pemilik: Mesin Press Bal Karton, bekas Merek: Unibaler (Denmark) Tipe: UX 4 Tahun produksi: 2020 Tekanan tekan: 4 t Bukaan pengisian: 710 x 446 mm Tinggi pengisian: 746 mm Tinggi ruang tekan: 1082 mm Panjang langkah: 550 mm Hodpfx Aexg I Awodqenu Ukuran bal: 710 x 560 x 630 mm Berat bal – karton: 30 - 60 kg Berat bal – plastik: 40 - 60 kg Lebar tali pengikat: 9 mm Sumber daya listrik: 230V TIDAK memerlukan listrik tiga fase! Dimensi: 853 x 734 x 1986 mm Berat: 515 kg Press ini berasal dari perusahaan terkemuka yang terawat baik dan hanya dijual karena kapasitas saat ini sudah tidak mencukupi.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Mesin briket untuk serutan aluminium atau baja Hnsdpfxsw Ig Suo Adqsu Tekanan tekan sangat tinggi hingga 3.700 kg/cm² Silo penampungan besar Ukuran briket: 60 x 40 mm Kapasitas: Serutan aluminium – hingga sekitar 70 kg/jam Serutan baja – hingga sekitar 100 kg/jam Serutan kuningan – hingga sekitar 100 kg/jam *tergantung bahan baku Sudah termasuk: - Wadah emulsi - Pompa emulsi - Pendingin oli

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, berat bal: 600 kg, dixi_80sls_de_1 Hnedexgcznspfx Adqou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Technical Data for EPS (Styrofoam) Compactor: Manufacturer: FZ-Recycling GmbH & Co. KG, Germany Model: FZR 320 Year of Manufacture: 12/2022 Drive Power (Shredder): 4 kW Drive Power (Compacting Screw): 7.5 kW Drive Power (Hydraulic Unit for Retaining Clamp in Press Channel): 1.1 kW Total Connected Load: 12.6 kW Power Requirement: 32 A Compression Ratio of Compacted Blocks to Original Material: approx. 50:1 (depending on material) Block Weight After Compaction: approx. 300 kg/m³ (material dependent) Block Dimensions: 320 x 320 mm, length variable Throughput Capacity: approx. 100 kg/hour (depending on material) Achievable Density: approx. 250 – 300 kg/m³ Compacted blocks are stacked approx. 1400 mm high on a pallet and wrapped with stretch film. Machine Dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H) Transport Weight (Compactor): 1,325 kg Condition of the Compactor: The compactor was only used sporadically, is in very good condition, and available at short notice. Due to the low machine weight and forklift pockets in the transport frame, the machine is mobile and can be used directly at the material source, e.g., on the construction site. Electrical connection is via a CEE 32 A plug. Hnsdpfx Adou Thkasqeu Scope of Delivery: 1 piece EPS compactor, ready for connection and operation. Remarks: Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, tegangan masuk: 400 V, berat bal: 550 kg, berat keseluruhan: 2.450 kg, Used HSM V-Press 1160 Plus vertical baler from 2016. The machine is regularly serviced by an authorized service center. The baler is fully functional and in very good technical and mechanical condition. Pressing force: 594 kN Voltage / Required: 400 V / 50 Hz Feeding opening (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Suitable materials: film, mixed paper, cardboard, print shop waste Freight costs depend on weight, volume, and especially distance. For enquiries, please provide the following information: delivery address (postal code and city). Further details require a telephone consultation, so please contact us by phone regarding transport costs and delivery arrangements. Our contact details can be found under the legal information of the seller. Hnsdpfx Aexgczhjdqeu Cash payment upon collection is possible. We sell and export worldwide. Thanks to our large storage capacity, we can supply even large quantities flexibly and quickly. Please contact us before making a purchase. We issue intra-community invoices (net, excl. VAT). Opening hours: Mon–Fri: 8:00 am – 4:00 pm Sat: closed

Kondisi: bekas, Tahun pembuatan: 2009, jam operasional: 20.536 h, gaya penekanan: 80 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat kosong: 16.000 kg, Technical Data – Baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 20,536 hours (as of September 2024) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed hopper dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at bulk densities of: – 30 kg/m³: approx. 6.0 t/h – 50 kg/m³: approx. 10.5 t/h – 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Hnjdpfx Adju Thypoqsu Display panel: pulsotronic Installed press dimensions: 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (press): 16 t Special equipment: – Wear-resistant floor made of HARDOX steel – Special press ram for compacting "difficult" materials and loose bulk goods with small grain size – Control cabinet climate control – Machine foot raising by 200 mm Note: The machine is currently in our workshop and undergoing partial refurbishment. We expect the refurbishment to be completed by the end of October, after which the machine will be tested and released for sale.