Kondisi: bekas, Tahun pembuatan: 2015, Pabrikan: HSM Tipe: HL 4010 Re Tahun pembuatan: 2015 Hjdpfx Ajyq Nqrsg Rjni Gaya penekanan: 40 t

Kondisi: bekas, Tahun pembuatan: 2013, gaya penekanan: 40 t, Pabrikan: HSM Tipe: HL 4010 Re Tahun pembuatan: 2015 Gaya penekanan: 40 t Hnedpfeyq Ngtsx Ag Rei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, tegangan masuk: 400 V, berat bal: 550 kg, berat keseluruhan: 2.450 kg, Used vertical baler HSM V-Press 1160 Plus from 2015. The machine has been regularly serviced by an authorized service center. The press is fully operational and in very good technical and visual condition. Hjdpfjyuxy Rsx Ag Reni Pressing force: 594 kN Voltage / required: 400 V / 50 Hz Loading opening width x height: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Machine width x depth x height: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Material to be pressed: film, mixed paper, cardboard, cutting machine waste Freight costs depend on weight, volume, and above all on the distance. Relevant information for inquiries includes: delivery address (postal code and town); further details will require a phone conversation, so we kindly ask you to contact us by phone for information regarding transport costs and additional delivery conditions. Our contact details can be found under the legal information of the seller. Cash payment upon collection on site is possible. We sell and export worldwide. Thanks to our extensive storage capacity, we can deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices – excluding VAT. Opening hours: Mon-Fri: 8:00-16:00 Sat: closed

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, DIXI 80 SLD Horizontal Press Sistem press semi-otomatis dengan tekanan 80 ton untuk pengurangan volume limbah (dapat didaur ulang) secara ekonomis di industri dan perdagangan: Karton Tetrapak Hjdpfx Ajyuxv Eog Roni Film plastik Busa Botol PET Mat isolasi dan bahan lain yang dapat dikompresi. Daya tekan: 80 t Sambungan listrik: 400 V 50 Hz; 11 kW; D-32 A (Opsi: K-32 A) Waktu siklus – rata-rata sekitar: 35 detik Panjang sekitar: 4.320 mm (tanpa perangkat pengangkat dan palet) Lebar sekitar: 1.830 mm Tinggi sekitar: 1.830 mm : 2.620 mm (dengan hopper) Bukaan pengisian (L x D) – bodi: 1.040 x 1.110 mm Dimensi bale: 1.120 x 1.120 x 1.200 mm Berat bale sekitar: 500–600 kg Pengikatan: 4 kawat manual dengan pengait cepat Berat mesin sekitar 8.000 kg (tanpa bale)

Kondisi: baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 4 t, lebar bukaan pengisian: 730 mm, panjang bukaan pengisian: 400 mm, panjang bal: 700 mm, lebar bal: 350 mm, tinggi bal: 500 mm, berat bal: 40 kg, lebar total: 988 mm, tinggi total: 2.033 mm, panjang total: 752 mm, jenis arus masuk: AC (pendingin udara), tegangan masuk: 230 V, berat keseluruhan: 380 kg, tingkat kebisingan: 60 dB, daya: 1,5 kW (2,04 hp), frekuensi input: 50 Hz, Baler vertikal yang berfungsi penuh dan telah diuji untuk mengepak jumlah kecil karton atau plastik. Informasi lebih lanjut atau foto tersedia melalui email atau telepon. Hsdpfjvy Drxsx Ag Rjni

Kondisi: baik (bekas), Tahun pembuatan: 2012, Pra-penghancur bukan bagian dari penawaran (bagian atas). Hanya bagian bawah yang ditawarkan. Mesin Press Kertas / Press Baler PRESTO CC 40 V Hjdpfoyrt T Tjx Ag Rsni Produsen: PRESTO GmbH & Co. KG Tipe mesin: CC 40 V Nomor mesin: 28074 Tahun pembuatan: 2012 Berat kosong: 4200 kg Tekanan operasi maksimum: 260 bar Kelas perlindungan: IP55 Pengarus nominal: 30 A Tegangan nominal: 400 V, 50 Hz Daya nominal: 15 kW Koneksi listrik: 35 A gG Tipe mesin: press baler horisontal untuk kertas dan karton

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 433 h, Fungsionalitas: berfungsi sepenuhnya, en Hnedpfxeyrngnj Ag Rei

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 311 h, Fungsionalitas: berfungsi sepenuhnya, 1 Hnedpfx Asyrnfksg Rji

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Hedeyu Iizepfx Ag Roni Filling opening dimensions: 119.5 cm x 65 cm Condition: Very good! Function tested. FLITS Rental & Sales service: Every machine comes with a pack of binding wire (120 wires included). Need more binding wire packs? Request a no-obligation quote. At FLITS Rental & Sales, you choose speed, clarity, and reliability. We think along with you, respond immediately, and ensure you have the right machine quickly. You are very welcome to view the machines on site. We are located at: Schoterlandseweg 94, 8413NE Oudehorne. Visits by appointment, so we can take the time to inform you properly and show you the right machines. We are happy to assist you! Waste Baler Paper Baler Cardboard Baler Plastic Baler Waste Compactor Recycling Textile Clothing Baler Waste Waste Processing

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 119 h, Fungsionalitas: berfungsi sepenuhnya, en Hnodpfx Ageyrfl Ij Rsi

Kondisi: bekas, Tahun pembuatan: 2005, lebar total: 1.300 mm, tinggi total: 3.850 mm, panjang total: 2.200 mm, ts_001 Hnjdpfx Agoyrtcuo Roi

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 305.537.1992, masa garansi: 12 bulan, Le Meccanica CLM630ST 630/150 Matrix und Walzen Hnjdpfx Agsv Sq Rle Rsi Zwangseinzug mit 0,9 kW Motor Derzeit komplette Überholung – Dichtungen und Lager inklusive Farbe nach Kundenwunsch Abholung und Transport sind vom Kunden zu organisieren.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat bal: 600 kg, Perlengkapan: dokumentasi / manual, b950a1bb-de28-44b2-afe9-bca823ad7d63 Hnjdpfxoyua E Io Ag Rsi

Kondisi: bekas, Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 153, BEKAS, KONDISI KERJA. Hnsdpsytaqnsfx Ag Rji

Kondisi: bekas, lebar total: 2.300 mm, tinggi total: 2.300 mm, panjang total: 4.900 mm, de-to-hu-it-lt Hedpjyq Iitefx Ag Roni

Kondisi: bekas, Screw Press REG-MAC for drying films and fibers, and for compacting foam materials (e.g. Styrofoam, EPS) drive motor 55 kW Hnedpfxjxgtd Hj Ag Rei

Kondisi: baru, Tahun pembuatan: 2026, * Options available at extra cost, see below * Production time approx. +/- 5 months The MPP NEM series hydraulic briquetting presses compact materials such as aluminium, copper, brass, bronze and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design, ensuring consistent briquette quality during continuous operation. The pressing process is carried out without the addition of binders, relying solely on hydraulic compaction pressure. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger volumes or special containers for installation beneath existing extraction and filtration systems as complete disposal units are also available. Depending on customer requirements, MPP NEM single machines can be combined to form a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, with a dust extractor, or using a tilting skip. For fully automated operation, the use of a lift-and-tip device in combination with a shredder is advisable. The MPP NEM series briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on model, between 40 and 80 mm; the diameter, depending on type, is 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a drip tray. This allows cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to a length of approx. 20 mm are filled into the feed hopper of the briquetting press. A stirrer is integrated at the bottom of the hopper, which prevents bridging and conveys the material into the pre-compactor chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the press chamber. The main press cylinder compresses the material against a vertical slide until the set press pressure is reached. The vertical cylinder then retracts, and the finished briquette is ejected. The more homogeneous the input material, the more uniform the length of the produced briquettes. Briquette production offers the following advantages: • Volume reduction by up to 90% • Emulsion recovery • Cost savings for storage and transport • Cost-effective disposal • Profitable resale Briquetting Press NEM 900: For briquetting aluminium chips Hsdpfxsgfm Rys Ag Reni Throughput rate: up to max. 350 kg/h (depending on material; chip length less than 10 mm) Last test with aluminium chips

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, berat bal: 450 kg, Perlengkapan: dokumentasi / manual, Horizontal baler DIXI 60 SLD Year of manufacture: 2014 Hsdpsytpz Aofx Ag Reni Machine inspected by service / new hydraulic cylinder installed. Semi-automatic 60-ton baling system for the efficient compaction of residual/recyclable materials in industrial and commercial applications: - Cardboard - Tetra packs - Foils - Foams - PET bottles - Insulation mats - and other compressible materials. Machine dimensions (L x H x W), approx. mm: 4150 (5080) x 1725 x 2035 Filling opening (W x H, standard), mm: 990 x 1110 Machine weight, approx. kg: 5420 Max. pressing force: 60 t / 600 kN Pressing cycle (average), approx. s: 47 Bale size (W x H x L), approx. mm: 800 x 1100 x 1200 Bale weight (depending on material), approx. kg: 370-410 Tying: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on weight, volume, and especially distance. For inquiries, the following information is relevant: delivery address (postal code and town), but further details must be discussed by phone. We therefore ask that you contact us by telephone regarding transport costs and additional delivery arrangements. Our contact information can be found under the legal information of the seller. Payment in cash is possible upon collection. We sell and export worldwide. Thanks to our large storage capacity, we can also deliver larger quantities flexibly and quickly. Please contact us before making a purchase. We issue intra-community invoices - excluding VAT. Opening hours: Mon-Fri: 8:00–16:00 Sat: closed

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, tegangan masuk: 400 V, berat bal: 550 kg, berat keseluruhan: 2.450 kg, Used HSM V-Press 1160 Plus vertical baler from 2016. The machine is regularly serviced by an authorized service center. The baler is fully functional and in very good technical and mechanical condition. Pressing force: 594 kN Voltage / Required: 400 V / 50 Hz Feeding opening (W x H): 1195 x 650 mm Bale dimensions (L x W x H): 1200 x 1100 x 1200 mm Machine dimensions (W x D x H): 1780 x 1568 x 2985 mm Machine weight: 2403 kg Suitable materials: film, mixed paper, cardboard, print shop waste Freight costs depend on weight, volume, and especially distance. For enquiries, please provide the following information: delivery address (postal code and city). Further details require a telephone consultation, so please contact us by phone regarding transport costs and delivery arrangements. Our contact details can be found under the legal information of the seller. Hedpfsytpxbox Ag Rsni Cash payment upon collection is possible. We sell and export worldwide. Thanks to our large storage capacity, we can supply even large quantities flexibly and quickly. Please contact us before making a purchase. We issue intra-community invoices (net, excl. VAT). Opening hours: Mon–Fri: 8:00 am – 4:00 pm Sat: closed

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 119.5 cm x 65 cm Condition: very good! Inspected and fully functional. FLITS Rental & Sales Service: Each machine comes with a bundle of baling wire (120 wires). Need more bundles of baling wire? Request a non-binding quote. Hnedpfx Agsyudfle Rsi At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond quickly, and ensure that you have the right machine as soon as possible. You are very welcome to visit and view the machines at our location. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to inform you properly and show you the right machines. We are happy to assist you further! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Kondisi: hampir baru (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: PVB330354, gaya penekanan: 5 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 500 mm, panjang bal: 1.000 mm, lebar bal: 700 mm, tinggi bal: 800 mm, berat bal: 120 kg, jenis arus masuk: tiga fasa, tegangan masuk: 230 V, arus masuk: 10 A, berat keseluruhan: 600 kg, tinggi transportasi: 2.370 mm, daya: 1,1 kW (1,50 hp), lebar transportasi: 1.350 mm, panjang transportasi: 900 mm, frekuensi input: 50 Hz, Mesin baler, sebelumnya digunakan untuk plastik film Hnodpfxeyt R Rxe Ag Rsi

Kondisi: sangat baik (bekas), HSM V-Press 825 plus baler Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Hedov Akcispfx Ag Rjni Loading height: 958 mm Feed opening (width x height): 1195 x 530 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Bale dimensions (length x width x height): 1200 x 780 x 700 mm Machine dimensions (width x depth x height): 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Waste materials: film, mixed paper, cardboard, die-cutting waste, textiles Year of manufacture: 2012-2014, price: 6,000 EUR HSM V-Press 825 pro baler, year: 2019-2021, price: 9,000 EUR

Kondisi: sangat baik (bekas), Model: Baler HSM V-press 1160 plus Hnodpsv Al Tijfx Ag Rsi Tekanan (kN): 59 Kapasitas (bale/jam): 1-2 Ukuran bale maksimum (mm): 1200x1100x1000-1200 Dimensi (p x l x t, mm): 1780x1150x2985 Daya (kW): 4 kW Berat (kg): 2300 Tahun pembuatan: 2018-2019

Kondisi: baik (bekas), HSM 155.1 VL baler Hjdpsv Alacefx Ag Rsni Pressing force: 18 tons Specific pressure: 2.33 kg/cm² Theoretical performance: 3 bales/h, i.e. approx. 500 kg/h Bale dimensions: 1100 x 700 x 800 mm Bale weight: 150–250 kg Power supply: 400 V / 4 kW

Kondisi: baik (bekas), B5 – Ideal untuk kotak besar: Performa tinggi – produktivitas besar Bale secara otomatis dikeluarkan Roller sabuk diposisikan di depan untuk memudahkan penggantian sabuk Berat bale karton (kg): 80-110 Berat bale plastik film (kg): 90-130 Ukuran bale PxLxT (mm): 1000 x 700 x 800 Tekanan (t): 5 Catu daya: 1x230V 50Hz 10A Motor (kW): 1,1 Hodpjv Aktnofx Ag Reni Tingkat kebisingan (dB): 65-68 Rata-rata waktu siklus (detik): 33 Dimensi PxLxT (mm): 1360 x 895 x 2370 Berat (kg): 600 Lubang pengisian lebar x tinggi (mm): 1000 x 500 Tahun produksi 2014-2016: 3800 euro Tahun produksi 2014: 3500 euro