Beli Mesin cetak injeksi dengan gaya penjepit 1.000 – 4.999 kN bekas (486)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Krauss Maffei KM 130-750 CX PolySet Year of manufacture: 2010 Injection unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Metering volume: 251 ccm Clamping unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Iodpfjxzz A Hsx Aahoik Hydraulic core pull x 1 Air core pull x 6 Hot runner controller x 18 Injection unit hardened - bimetallic Proportional valve on injection unit – precise injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are commissioned by our service technicians prior to sale. It is possible to obtain a video showing technical tests of the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jam operasional: 45.200 h, spritzg-mit-roboter Iisdpfx Aajxpnpijhjk

Kondisi: bekas, Tahun pembuatan: 2024, Kraus Maffei mesin injeksi plastik tahun 2024 dalam kondisi sangat baik. Ijdpfxox Ald Rs Aahoik Dalam kondisi sempurna, hanya dengan 588 jam operasi. Dilengkapi dengan: 1x katup pneumatik pada MOP, 1x unit penggerak hidrolik 20 liter, 2x penarik inti hidraulik, 1x manifold air 4-jalur. Tersedia segera dan dapat dilihat beroperasi berdasarkan perjanjian. Info lebih lanjut atas permintaan. Unit injeksi: 1400 Sekrup: 60 mm / 23.00 dengan pelindung aus / 25.50 Lebar bukaan maks.: 1150 mm Ejektor: Ejektor pelat EM hidrolik/elektrik Penarik inti: 2 hidrolik Katup udara: 1 MMP Sistem kontrol: MC P1 Catu daya: 400 / 230 V 50Hz 3-fase dengan netral Gaya penjepit: 2500 kN Kapasitas injeksi: 679 cm³

Kondisi: hampir baru (bekas), Tahun pembuatan: 2008, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 4.500 kN, diameter sekrup: 80 mm, jarak antara tiang: 780 mm, volume langkah: 1.850 cm³, tekanan injeksi: 2.000 batang, berat injeksi: 1.850 g, berat keseluruhan: 17.000 kg, jumlah injeksi: 1, frekuensi input: 50 Hz, tegangan masuk: 400 V, Mesin injeksi 450T dalam kondisi hampir baru Tahun pembuatan: 2008, hanya digunakan secara sporadis – mesin dalam kondisi sangat baik. Dilengkapi dengan layar sentuh + PLC B&R, komponen hidrolik dari Bosch. Layar sentuh dapat diatur dalam bahasa Belanda dan Inggris. Mesin sangat kokoh dan kuat. Mesin masih terpasang dan dapat didemonstrasikan berfungsi penuh. Gaya penutup: 450 ton Berat tembakan: sekitar 1850 g Berat mesin: sekitar 17 ton Dapat dimuat ke truk Anda menggunakan crane overhead. Iijdpfoxvatyox Aahok Panduan lengkap berbahasa Belanda tersedia dalam PDF.

Kondisi: baik (bekas), Tahun pembuatan: 2003, netstal-s1500-460-de-specs Iisdowkg Txepfx Aahsk

Kondisi: diremajakan ulang (bekas), jam operasional: 35.498 h, Fungsionalitas: berfungsi sepenuhnya, demag-d325-1590-nc3-en Iiodpfx Aaox Hg R Ajhok

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2,007 bar Metering volume: 679 cc Clamping unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Iisdjxzz Atepfx Aahsk Clamping unit: hydraulic Control: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: 12,000 h in automatic mode Euromap 67 interface Robot interface Air valve with vacuum monitoring x 1 Hydraulic core pull units x 3 Air core pull units x 3 Hot runner control x 10 Injection unit hardened – bimetallic Energy-efficient machine – equipped with a system with 3 variable-capacity hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Robot Krauss Maffei LRX Easy Control 100 Year of manufacture: 2019 4-axis robot: 3 axes driven by servomotors (electric); C axis – pneumatic Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt subject to surcharge Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All offered machines are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, gaya penjepit: 1.300 kN, Clamping force: 130 t Screw diameter: 40 mm Shot weight: 184 g Tie bar distance (vertical): 520 mm Tie bar distance (horizontal): 520 mm Min/Max mold height: 350 mm Opening stroke: 925 mm Shot volume: 201 cm³ Iisdpfx Aajwv Hrxshjk Type: Horizontal Drive: Hydraulic + Apex sprue picker robot Core pulls: Yes

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Krauss Maffei KM 200-750 CX with Wittmann-Krauss Maffei LRX100-1811 Robot Year of manufacture: 2014 Injection unit: Screw diameter: 45 mm Shot weight: 289 g Injection pressure: 2,336 bar Dosage volume: 318 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Iiodpoxzz Agjfx Aahjk Min. mold installation height – 350 mm Air valve x 2 Hydraulic core pull x 2 Control unit with 24 hot runner zones Injection unit hardened – bimetallic Parallel movements Proportional valve on the injection unit – precise injection Kistler sensor – mold pressure control Wittmann-Krauss Maffei LRX100-1811 Robot Year: 2014 High-speed robot 5-axis robot: 3 axes driven by servo motors (electric); axes B and C – pneumatic Touch control panel Robot with adapter, conveyor belt and safety enclosure Acquisition of the robot and conveyor belt available at extra cost Dimensions: Weight: 11,500 kg Length/Width/Height: 5.32x1.98x2.06 m All offered machines are started and tested by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection unit: Screw diameter: 70 mm Shot weight: 980 g Injection pressure: 1877 bar Metering volume: 1077 ccm Clamping unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen size: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Iisdpfjxzz Aaex Aahok Control system: MC6 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Controller with 16 hot runner zones Injection unit hardened – bimetallic Energy-efficient machine – features a system with 3 variable output hydraulic pumps Parallel movements Proportional valve on the injection unit – for precise injection Additional oil cleaning pump Robot: Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes powered by servo motors (electric): X, Y, Z, B; axis C Touch panel controller Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor at additional cost Dimensions: Weight: 20,100 kg Length/width/height: 6.50x2.20x2.30 m All machines offered are put into operation by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Krauss Maffei KM 400-3000 GX Blue Power with Krauss Maffei LRX 250 Robot Year of manufacture: 2018 Injection Unit: Screw diameter: 80 mm Shot weight: 1464 g Injection pressure: 1855 bar Metering volume: 1608 cc Clamping Unit: Clamping force: 400 t Tie bar spacing: 920x830 mm Platen size: 1280x1240 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 - touchscreen Additional equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Min./max. mould height: 400/900 mm Air valve x 4 Hydraulic core pull x 4 Hot runner control x 36 Self-closing nozzle x 10 Hardened injection unit - bimetallic Proportional valve on the injection unit – precise injection Automatic upper tie bar extraction function Machine regularly serviced by authorized Krauss Maffei service Krauss Maffei LRX 250 robot Year of manufacture: 2018 High-speed robot 5-axis robot: 5 axes driven by servo motors (electric): X, Y (telescopic), Z, B (rotation) and C Vacuum Touch panel control Robot including adapter, conveyor belt and protective housing Purchase of robot and conveyor at extra cost Dimensions: Weight: 22,650 kg Iijdpfx Aoxzzy Soahok Length/Width/Height: 7.58x2.73x2.32 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine is available on request or you may participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection Unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping Unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping system: toggle lever Control system: NC5 Additional Equipment: Euromap 67 Robot interface Control system with air valve Control system with 5 hot runner zones Hardened injection unit - bimetallic barrel Moog proportional valve on injection unit – precise injection Parallel movements Central lubrication 3 variable-displacement hydraulic pumps Built-in printer The machine has been regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR853 Year of manufacture: 2016 6-axis robot: 5 axes driven by servo motors (electric): X, telescopic Y, Z, B, C Axis travel ranges: X-1200, Y-2400, Z-4000 Touchscreen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Iisdexzzyxspfx Aahok Purchase of the robot and conveyor available at extra cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Sumitomo Demag Systec 350/720-2300 / Production Line with Wittmann-Demag DR833 Robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar spacing: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit: toggle lever Control: NC5 Additional equipment: Euromap 67 Robot interface Air valve x 5 Iodpexzzylofx Aahjik Hydraulic core pull with proportional valve, controlled x 1 Hot runner controller x 5 Injection unit hardened – bimetal Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes driven by servo motors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel range in axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor possible at additional cost Dimensions: Weight: 15,750 kg Length/width/height: 8.26x2.01x2.27 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Iiedpfx Aaoxzzyfehjk Injection Unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Dosing volume: 168 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen dimensions: 600x600 mm Ejector: hydraulic Clamping system: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - Bimetal Main motor of the machine - Servo motor driven with inverter - Energy saving Built-in printer Machine has been regularly serviced by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servo motors (electric); axes A and C (rotation) - pneumatic Touch control panel Robot safety package Robot with adapter, protective enclosure Purchase of the robot at extra cost Dimensions: Weight: 4400 kg Length/Width/Height: 4.20x1.40x2.00 m All offered machines are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Battenfeld TM 100/525 Year of manufacture: 2007 Injection unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2100 bar Dosage volume: 251 cc Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 640x640 mm Ejector: hydraulic Clamping unit: toggle lever Control: UNILOG B2 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hot runner control x 12 Iiodpfxexzzwqo Aahjk Injection unit is wear-resistant and corrosion-resistant Central lubrication Automatic mold height adjustment Dimensions: Weight: 3900 kg Length/width/height: 4.46x1.33x1.78 m Drive: Pump/motor: 18.5 kW Heating capacity: 12.1 kW Total power: 30.6 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in technical live tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / All-Electric Machine / Operating Hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Iiodpfxsxzzwko Aahok Dosage volume: 169 ccm Clamping unit: Clamping force: 110 t Tie bar spacing: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping system: toggle Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition All-electric machine: high-speed, energy efficient, and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 interface Robot interface Control with air valve Hydraulic core pull x 1 Hot runner control Injection unit is wear-resistant and corrosion-resistant Central lubrication Automatic mold height adjustment Parallel movements The machine has been serviced in Germany Wittmann W818 Robot Year of manufacture: 2015 4-axis robot: 3 axes are servo-driven (electric); C axis - pneumatic Axis travel distances: X-420, Y-1200, Z-2000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Purchase of robot and conveyor at additional cost Dimensions: Weight: 4800 kg L/W/H: 4.91x1.42x2.10 m All machines offered are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Wittmann Battenfeld EcoPower 110/350 / All-Electric Injection Moulding Machine / Production Line with Wittmann W818 Robot Iisdpfsxzzvmjx Aahek Year of manufacture: 2012 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Injection pressure: 2083 bar Shot volume: 169 cm³ Clamping Unit: Clamping force: 110 t Tie bar distance: 470x420 mm Platen size: 680x660 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B6 – touchscreen Additional equipment: - All-electric machine: high-speed, energy-efficient, and very quiet - Euromap 67 - Robot interface - Air valve x1 - Hydraulic core pull x1 - Control with 12 hot runner zones - Injection unit with wear-resistant, corrosion-resistant materials - Central lubrication - Automatic mould height adjustment - The machine was serviced in Germany - Wittmann W818 robot Year of manufacture: 2012 - 4-axis robot: 3 axes electrically driven by servo motors; A and C movement - Axis travel (mm): X-420, Y-800, Z-1500 - Touch control panel - Robot complete with adapter, conveyor belt, and safety enclosure - Purchase of robot and conveyor belt possible at extra cost Dimensions: Weight: 4300 kg LxWxH: 4.91 x 1.42 x 2.10 m All machines offered are started up by our service engineers prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1997, Battenfeld BA 1300V/315 V-R / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 1997 Injection unit: Screw diameter: 40 mm Shot weight: 182.9 g Injection pressure: 1,575 bar Dosing volume: 201 cc Clamping unit: Clamping force: 130 t Tie bar spacing: 454 x 740 mm Platen size: 815 x 1,010 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG 4000 Additional equipment: Air valve x 5 Hydraulic core pull x 1 Rotary table: 1,250 mm Vertical injection unit – screw diameter fi 35 mm Dimensions: Iodpexzzvgsfx Aahoik Weight: 7,500 kg Length/Width/Height: 3.83 x 2.33 x 4.16 m Drive: Pump/motor: 18.5 kW Heating capacity: 8.98 kW Total power: 27.48 kW All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical demonstrations at our company in Łódź. Price: on request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Shot weight: 175.6 g Injection pressure: 2,743 bar Dosage volume: 193 ccm Clamping unit: Clamping force: 150 t Tie bar distance: 0x0 mm Platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high speed, energy-efficient and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runner control x 12 Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1,500 mm Rotary table driven by servomotor, controlled via inverter Dimensions: Weight: 11,300 kg Length/Width/Height: 3.83x1.50x4.07 m All machines offered are started up by our service technicians prior to sale. Ijdpfxjxzzu Ns Aahsik It is possible to receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Battenfeld HM 270/1330H/1000H / 2K machine in very good technical condition / Operating hours: approx. 10,000 h in automatic mode Year of manufacture: 2006 Injection unit: Screw diameter: 55 mm Shot weight: 594 g Injection pressure: 2041 bar Dosage volume: 653 ccm Clamping unit: Clamping force: 270 t Iiodpexzzuvofx Aahsk Tie bar spacing: 710x710 mm Platen size: 1030x1000 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B4 Additional equipment: Machine in very good technical condition 2K machine with parallel-arranged horizontal injection units Central injection Operating hours: approx. 10,000 in automatic mode Total operating hours: 11,876 h Control system with air valve Hydraulic core pull x 3 Reinforced injection units – bimetallic Proportional valves on injection units – precise injection Parallel movements Injection unit 1000H Screw diameter: 50 mm Shot weight: 446.8 g Injection pressure: 2016 bar Dosage volume: 491 ccm Dimensions: Weight: 15,000 kg Length/Width/Height: 6.90x1.78x2.34 m All offered machines are started and tested by our service technicians before sale. It is possible to receive a video of the technical inspections of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Battenfeld HM 300/2250S with Wittmann W818 Robot / Machine in very good technical condition / Operating hours: approx. 40,000 h in automatic mode Year of manufacture: 2007 Injection unit: Screw diameter: 55 mm Shot weight: 702.5 g Injection pressure: 2500 bar Dosing volume: 772 cm³ Clamping unit: Clamping force: 300 t Tie bar spacing: 710x630 mm Platen size: 1030x1020 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - Touch Panel Isdpfxsxzztxe Aahsik Additional equipment: Machine in very good technical condition Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control x 8 Injection unit is wear-resistant and corrosion-proof Proportional valve on the injection unit – precise injection The machine is fitted with a new original screw and cylinder Wittmann W818 Robot 4-axis, high-speed robot: 3 axes are driven by servo motors (electric); movement A and C Touch control panel Robot with adapter, safety enclosure Dimensions: Weight: 13,000 kg Length/Width/Height: 6.90x1.90x2.40 m Drive: Pump/Motor: 45 kW Heating capacity: 22.7 kW Total power: 67.7 kW All offered machines are started and tested by our service technicians prior to sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Battenfeld EcoPower SE 300/1330 / Electric Injection Moulding Machine Year of manufacture: 2012 Injection Unit: Screw diameter: 50 mm Shot weight: 491.4 g Injection pressure: 2470 bar Dosage volume: 540 ccm Clamping Unit: Clamping force: 300 t Tie bar distance: 770x720 mm Platen size: 1090x1170 mm Ejector: electric Clamping system: toggle lever Control system: UNILOG B6 - Touchscreen Additional equipment: Electric machine: high-speed, energy-saving, and very quiet Machine in very good technical condition Euromap 67 Robot interface Air valves x 8 Control system with hot runner zones x6 Injection unit hardened – bimetallic Parallel movements Iijdpsxzztrefx Aahek Option to change screw diameter to 45, 55, or 65 mm Dimensions: Weight: 14,100 kg Length/Width/Height: 7.20 x 2.04 x 2.20 m All machines offered are started up and checked by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Boy 100E / Hybrid Machine Year of Manufacture: 2014 Injection Unit: Screw Diameter: 32 mm Injection Weight: 92.3 g Injection Pressure: 2,127 bar Metering Volume: 96.5 ccm Clamping Unit: Clamping Force: 100 t Tie Bar Distance: 430x360 mm Ijdpfx Ajxzztljahoik Platen Size: 750x650 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: Procan Alpha 2 – Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot Interface Control with air valve Injection unit hardened – bimetallic Main motor of the machine – servo motor driven with inverter – energy saving Dimensions: Weight: 3,530 kg Length/Width/Height: 4.37x1.21x2.20 m Drive: Pump/Motor: 15 kW Heating Capacity: 7.7 kW Total Power: 22.7 kW All machines offered are started up by our service technicians before sale. It is possible to obtain a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Ferromatik Milacron K110D-S/2F / 2K Injection Moulding Machine Year of manufacture: 1998 Injection Unit: Screw diameter: 30 mm Shot weight: approx. 85 g Injection pressure: 2298 bar Dosage volume: 99 ccm Iijdpfx Ajxzzr Uoahjk Clamping Unit: Clamping force: 110 t Tie bar distance: 470x470 mm Platen size: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional Equipment: 2-component injection moulding machine Euromap 67 Robot interface 4x hydraulic core pulls Controller with hot runner interface Injection unit is wear-resistant and corrosion-resistant Screw diameter in vertical injection unit: ⌀25 mm – approx. 43 g/PS The machine has been serviced regularly Recently, the service center replaced the machine’s cylinder, screw, and hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/Width/Height: 5.00x1.60x3.60 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine, or to participate in live technical testing at our facility in Łódź. Price: On request

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / Production Line with Wemo 6-5 xDesign Robot, Wemo WCS-R Conveyor, and Safety Enclosure / Machine in Excellent Technical Condition Year of Manufacture: 2017 Injection Unit: Screw Diameter: 45 mm Shot Weight: 215 g Injection Pressure: 1984 bar Dosage Volume: 226 ccm Clamping Unit: Clamping Force: 150 t Tie Bar Spacing: 510x510 mm Platen Size: 740x740 mm Ejector: Hydraulic Clamping Unit: Toggle Lever Control System: B&R - Touchscreen Additional Equipment: Hybrid machine: High-speed, energy-saving, and very quiet Operating Hours: 11,000 in automatic mode Euromap 67 Robot Interface Air Valve x 1 Hydraulic Core Pull x 1 Hot Runner Control Unit x 36 (available for an additional charge) Injection Unit is wear-resistant and corrosion-proof Main Motor – Servo-driven with inverter Central Lubrication System Machine with Cylinder / Reservoir with compressed nitrogen (additional charge for fast operation) Robot Wemo 6-5 xDesign Year of Manufacture: 2017 4-Axis Robot: 3 axes are servo-driven (electric) Robot Safety Package Robot with Adapter, Wemo WCS-R Conveyor, and Safety Enclosure Purchase of robot and conveyor at additional cost Dimensions: Iiedpoxzzq Rsfx Aahjk Weight: 7,500 kg Length/Width/Height: 6.10x1.97x2.60 m Drive Unit: Pump/Motor: 11.5 kW Heating Capacity: 11.3 kW Total Power: 22.8 kW All machines offered are tested by our service technicians before sale. It is possible to receive a video of technical tests of the selected machine, or to participate in live technical tests at our company in Łódź. Price: 25,000.00 EUR