Beli Mesin penggulung ulir bekas (42)

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Διαμετρήματα σπειρώματος M6-M16 Μέγιστο μήκος ράβδων 600 mm Gedpfswalx Esx Ag Rjuk Σπείρωση και από τις δύο πλευρές

Kondisi: bekas, Tahun pembuatan: 2007, de-to-hu Gjdpfxow E Nmks Ag Rouk

Kondisi: bekas, Thread rolling machine - Thread rolling machine ORT RP18 2-Rolls Shaft diameter: 69.95 mm See video Guedpfx Aget Apugs Rok The machine is located in our warehouse in Gussago (BS), powered up. Test run possible Mimu Werkzeugmaschinen Thread rolling is a mechanical process without chip removal, which can be performed cold or hot, aimed at improving surface finish (and thus fatigue behavior).

Kondisi: bekas, Mesin Rol Ulir TLM RP8 TLM TORTONA Tahun: 1995 Rentang diameter: 3-8 mm Panjang poros di bawah kepala: 90 mm Panjang ulir maks.: 52 mm Ukuran die: 130/115x54 Gusdex Aqprepfx Ag Rsk

Kondisi: baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, DIJUAL Gedpfx Aoxv Dcxjg Rjuk Mesin pembuat ulir (rolling) Escofier H20Z

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, dehu-01 Guodpfsxukrqex Ag Rok

Kondisi: bekas, 2 Mesin Pembentuk Ulir Bekas WMW UPW25 Gedpfex Dmnyjx Ag Rouk ---Hanya 10.000,00 Euro---

Kondisi: bekas, Tahun pembuatan: 1988, en-technical-details Technical Details: Pressure: 10 t Workpiece diameter - max.: 40 mm Gedpfjw D Aq Tex Ag Rouk Thread length: 70-80 mm Workpiece diameter min./max.: 3 / 40 mm Spindle speeds: 47-94 rpm Feed rate: 0.5 - 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions: 1.4 x 1.4 x 1.7 (W x D x H) m Hydraulic unit dimensions: 0.8 x 1.2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40 mm, min. thread diameter 3 mm up to 3.5 mm pitch, max. pitch 1.75 mm Roll width min. 80 mm, max. 120 mm Shaft speed 47-94 rpm Roller shaft diameter 40 mm various rollers as accessories

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, ORT RP30 MS 2 Rolls 30 Tons Thread rolling, knurling, small gears Year of manufacture: 2009 Electronic overhaul and retrofit with Siemens PLC (2025) Gjdpfx Agouykz De Rjuk The machine is powered and available for inspection at our warehouse in Gussago BS. Test run possible. M i m u Machine Tools Rolling is a mechanical process without material removal (chipless), which can be carried out either cold or hot, with the purpose of improving surface finish (and therefore fatigue performance). Force (tons): 30 Number of rolls: 2

Kondisi: bekas, technical-data-2024-06 Godpsxbt Izefx Ag Rsuk

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Spesifikasi teknis – SENY D75B: Tekanan penggilingan: 220 kN Diameter benda kerja: min. 3 mm – maks. 70 mm Pitch maksimum: 6 mm Pitch alur maksimum: 2,25 mm Lebar rol maksimum: 160 mm Gusdpoxm Stgjfx Ag Rok Diameter rol: min. 133 mm – maks. 170 mm Kecepatan rotasi poros rol: 24 – 30 – 38 – 45 – 62 – 72 – 90 – 114 rpm Diameter poros dudukan rol: 54 mm standar – 69,85 mm khusus Jarak antar poros: min. 135 mm – maks. 230 mm Langkah kerja: maks. 15 menit Kecepatan umpan: 0,5 mm/s – 6 mm/s Waktu laminasi: 0,1 s – 100 s Waktu jeda: 0,1 s – 100 s Daya motor utama: 5,5 kW Konsumsi listrik: 8,6 kW Kapasitas tangki: 130 liter Berat: sekitar 2.100 kg. Rol tambahan tersedia: M4,5 x 0,75 ISO. M6 ISO. M10 ISO.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, panjang ulir: 12.000 mm, berat keseluruhan: 5.000 kg, diameter benda kerja (maks.): 90 mm, diameter spindel: 80 mm, jenis arus masuk: tiga fasa, diameter rol: 250 mm, kecepatan spindel (maks.): 50 rpm, kecepatan spindel (min.): 20 rpm, tinggi total: 2.000 mm, panjang total: 2.400 mm, lebar total: 2.000 mm, 60-тонная гидравлическая резьбонарезная машина с поворотными шпинделями для подачи заготовки и сквозного проката Gusdjv Rb Apjpfx Ag Rek Скачать PDF-файл с фотографиями

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 00049781, diameter benda kerja (maks.): 50 mm, diameter spindel: 69 mm, kecepatan spindel (maks.): 5.000 rpm, panjang langkah: 130 mm, jarak antar baris: 255 mm, RINCIAN TEKNIS Luas penopang: 180 mm Diameter benda kerja: 4 - 50 mm Tekanan penggilingan (penyesuaian tanpa langkah): 0-200 kN Kecepatan pemajuan (penyesuaian tanpa langkah): 0-50 mm/s Siklus penggilingan per menit: 0-86 Spindel penggilingan Diameter spindel penggilingan: 69,85 mm Jarak antar spindel penggilingan: 125 - 255 mm Gusdpfxexbfwzj Ag Rjk Panjang penjepitan spindel: 160 mm Langkah carriage spindel penggilingan: 130 mm Kecepatan putar spindel penggilingan: 3000-5000 rpm Diameter alat penggilingan: 130 - 200 mm Tinggi rangka mesin: 800 mm Tinggi spindel penggilingan di atas rangka mesin: 160 mm RINCIAN MESIN Kontrol: SIEMENS SIMATIC C7 Tegangan: 400 V, 50 Hz Dimensi & Berat Tinggi mesin: 1.600 mm Berat: 2.400 kg

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Mill, Profile Rolling Machine Manufacturer: PEE-WEE Model: P 24 Q Serial No.: LC2403099 Year of manufacture: 2004 Rolling force max.: 24 tons Tool diameter max.: 200 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Gedpfx Agoh A S Htj Rsuk Tool holding length / tool length max.: 180 mm Workpiece diameter max.: 50 mm Roll spindle speed: 22 - 44 - 95 - 190 rpm Hydraulic drive motor power: approx. 3 kW Roll drive motor power: 5.5 kW Electrical connection: 400 Volt, 50 Hz - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated into machine base Installation dimensions (L x W x H): 2000 x 1750 x 2550 mm Weight: approx. 3 tons Good condition Plunge Rolling: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length equals the width of the rolling tools. Through-feed Rolling: Used when thread length is greater than the width of the rolling tools. Through-feed tools have three sections—the entry, the calibration zone, and the exit. Knurling rolls have no pitch and are swiveled at the lead angle of the profile to be rolled. Lead Rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and the swivel angle results in the lead angle in the workpiece.

Kondisi: diremajakan ulang (bekas), CNC-Gewindewalzmaschine-Gewinde-Rollmaschine-elektronische-Retro fit-mit-Siemens-SPS-und-Touchscreen-Thommen-PR17 Guodpfx Aoilh Tijg Rsk

Kondisi: bekas, 1 Gujdsxbt Iuopfx Ag Rjk

Kondisi: bekas, Tahun pembuatan: 1991, Workpiece diameter 30 mm Thread length 110 mm Thread pitch 0.5-2.75 mm/rev Total power requirement 4.5 kW Machine weight approx. 1.7 t Space requirement approx. m M O N N I E R & ZAHNER Switzerland Thread whirling machine with workpiece loading system Type MZ 600, year of manufacture approx. 1991, #3591 _____ Max. workpiece diameter approx. 30 mm Max. workpiece length approx. 110 mm Axial milling length approx. 100 mm Module in steel approx. 1 Worm starts 1 Axis distance tool-workpiece min./max. 0 - 70 mm Whirling head swiveling +/- 12° Tool size approx. 70 x 16 mm Whirling head speeds approx. 1,000 - 6,000 rpm Pitch range approx. 0.5 - 2.75 mm/rev Whirling head drive approx. 1.5 kW Total drive approx. 4.5 kW - 220 V/380 V / 50 Hz Weight approx. 1,700 kg Godpfx Ajt Hwzcsg Reuk Accessories / Special Equipment: Machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a vibratory bowl feeder from Rübenach with pneumatic swing gripper for inserting the blanks, as well as a tailstock (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew while the cross slide sets the thread depth. Copying unit at the end of the cross slide with template holder for tapered screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electrical program control with display of movement sequence. Error display, workpiece counter, oil mist extraction, coolant system, etc.

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Godeuz If Nepfx Ag Rjuk Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: bekas, Thread rolling machine – thread roller ORT RP18 2-roll Swivelling spindle Overhauled with Siemens PLC See video The machine is powered in our warehouse Godpfouua H Rjx Ag Rjuk Test run possible

Kondisi: bekas, TECHNICAL DATA - Max. capacity: 40 [t] Guedpfx Agouhb Uhj Rsk - Max. workpiece diameter: 40 [mm] - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions: 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock unit - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Kondisi: bekas, Tahun pembuatan: 2001, CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Druck 0,2-40 t Werkstückdurchmesser - max. 70 mm Gewindelänge 120 mm Steuerung Gesamtleistungsbedarf 29 kW Maschinengewicht ca. 9,5 t Raumbedarf ca. m Angebot Wir freuen uns, Ihnen aus unserem Lagerbestand anbieten zu können, vorbehaltlich vorherigen Verkaufs und Fehler in den technischen Daten: PROFIROLL - BAD DÜBEN (Deutschland) CNC-Gewinde-, Zahnrad- und Profilwalzmaschine Modell ROLLEX Jahr 2001 Walzkraft stufenlos einstellbar 0,2 - 40 Tonnen Walzspindel-Ø 120 mm Guodpfxet Hw N To Ag Rok Werkstück-Ø, max. (ungefähr) 70 mm Spindelantrieb je ca. 8,5 kW Gesamtstromaufnahme ca. 29 kW - 400 V - 50 Hz Gewicht ca. 9.500 kg Zubehör / Besondere Merkmale Die Maschine ist mit einem modernen CNC-Steuerungssystem ausgestattet, das vom Hersteller entwickelt wurde. Mit Eingabe aller relevanten Prozessdaten und Werkstückdaten, um die Maschine einfach und schnell für andere Werkstückgrößen einzustellen (Umrüstzeit). Alle Prozessparameter werden grafisch auf dem Monitor dargestellt und bieten dem Benutzer einen optimierten Prozesszyklus. Aufgesetzte (Werkstück-) Zentrumswalzvorrichtung für wellenförmige Werkstücke (wie Getriebewellen) mit Mittellöchern, mit einer Spannvorrichtung, mit prismatischen Vorhaltern zur Positionierung des Werkstücks vor dem Spannen und mit einem motorisierten (angetriebenen) Reitstockzentrum auf der Vorderseite des Werkstücks. Der Hub des Werkstückschlittens beträgt ca. 500 mm - das Werkstück wird also geklemmt und hydraulisch zwischen den beiden Walzwerkzeugen bewegt. Kühlgerät für das Hydrauliköl, separater Schaltschrank, CNC-Bedienfeld usw. Durchsichtige Sicherheitsabdeckungen im Arbeitsbereich. Zentralschmierung. English translation: CNC Thread, Gear and Profile Rolling Machine Pressing force: 0.2 - 40 t Workpiece diameter - max. 70 mm Thread length: 120 mm CNC control Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. ... m OFFER We are pleased to offer you the following item from our stock, subject to prior sale and errors in technical data: PROFIROLL - BAD DÜBEN (Germany) CNC Thread, Gear and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force infinitely adjustable: 0.2 - 40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Spindle drive (each): approx. 8.5 kW Total electrical load: approx. 29 kW, 400 V, 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: * The machine is equipped with a modern CNC control system developed by the manufacturer. Entry of all relevant process data and workpiece data allows easy and quick retooling for different workpiece sizes (short changeover time). All process parameters are graphically displayed on the monitor and provide the user with an optimized process cycle. * Integrated (workpiece) center rolling device for shaft-type workpieces (such as gear shafts) with center holes, featuring a clamping device and prismatic pre-holders for positioning the workpiece before clamping, and a motorized (driven) tailstock center at the front of the workpiece. The stroke of the workpiece slide is approx. 500 mm; the workpiece is clamped and hydraulically moved between the two rolling tools. * Cooling unit for the hydraulic oil, separate control cabinet, CNC control panel, etc. * Transparent safety covers in the working area. Centralized lubrication system.

Kondisi: diremajakan ulang (bekas), Thread rolling machine - thread rolling machine ORT RP18 2-roller Overhauled - new Siemens PLC See video The machine is located in our warehouse in Gussago BS, under power Test run possible Gjdpfxovxa Dbs Ag Rjuk Mimu machine tools Thread rolling is a mechanical process without material removal, which can be carried out cold or hot, serving the purpose of improving surface finish (and thus fatigue behavior).

Kondisi: bekas, TECHNICAL DATA - Max. piece length: 1350 mm - Max. tooth length: 1200 mm - Max. tooth diameter: 120 mm - Power: 18.5 kW Gujdjuhb Unopfx Ag Rok - Machine dimensions: 2840 x 1700 x 1420 mm

Kondisi: bekas, Tahun pembuatan: 2003, Thread Rolling Machine Description: Rolling force: 2-20 tons Gusdpfxet Hmv No Ag Rok Workpiece diameter: max. 75 mm Tool diameter: 140-200 mm Inclination: +/-6° Shaft diameter: 69.95 mm Manufacturer: ESCOFIER Model: H20Z Year of manufacture: 2003 Under power in our warehouse M i M u Machine Tools (Italy)

Kondisi: bekas, Gewinderollmaschine ORT RP30U Godpfx Agjt H Ty Ue Rouk