Beli Mesin frais dengan tiang bergerak bekas (108)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.400 mm, kecepatan pemakanan sumbu X: 30.000 m/menit, laju pemakanan gandar Y: 30.000 m/menit, laju pemakanan sumbu Z: 30.000 m/menit, kecepatan spindel (maks.): 2.000 rpm, panjang meja: 4.000 mm, lebar meja: 2.000 mm, CNC bed-type milling machine SACHMANN RAMBAUDI - MP-212 HS KOSMO 3 swiveling head SK-50, 0.02 degree, 1195 Nm Spindle extension L = 600 mm with 2000 rpm 3D touch probe MP60 ATC chain with 80 positions Coolant system 1,320 l with 4.8 bar Rotary table 2000 x 1600 x 15 t V-axis (infeed) 1500 mm Table rotation speed 3 rpm Heidenhain RON 700 rotary encoder for table rotation Ram size 500 x 500 mm with 56 kW Chip conveyor X-axis: 6000 mm Y-axis: 2000 mm Z-axis: 1400 mm Table length: 4000 mm Table width: 2000 mm Table load capacity: 25,000 kg Hsdpfxox Nh H Ds Akvjfn Spindle power: 37 kW Spindle speed: 2000 rpm Tool holder: 50 ISO/BT/MK Feed X-axis: 30,000 mm/min Feed Y-axis: 30,000 mm/min Feed Z-axis: 30,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 15,000 mm Width: 8,000 mm Height: 6,000 mm Weight: 85,000 kg Please note: The information provided on this page has been collected to the best of our knowledge and, where possible, from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Therefore, these do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, jarak pergerakan sumbu X: 14.000 mm, jarak lintasan sumbu Y: 2.600 mm, jarak gerak sumbu Z: 1.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 35.000 m/menit, pergerakan cepat sumbu Z: 35.000 m/menit, kecepatan spindel (maks.): 5.000 rpm, kecepatan rotasi (maks.): 5.000 rpm, lebar total: 5.000 mm, tinggi total: 4.900 mm, panjang total: 22.000 mm, panjang meja: 14.000 mm, lebar meja: 2.000 mm, beban meja: 50.000 kg, Model FP ideal untuk berbagai aplikasi, komponen ukuran sedang-besar Mesin bor milling tipe lantai Kinerja dinamis tinggi dengan kecepatan hingga 35 m/menit Sistem pemandu linear INA Slide pengunci hidromekanik Kepala milling ortogonal untuk pengerjaan pada sudut mana pun yang diinginkan Sumbu X: 14.000 mm Sumbu Y: 2.600 mm Sumbu Z: 1.500 mm Panjang meja: 14.000 mm Hsdpfx Aevn S E Nokvefn Lebar meja: 2.000 mm Beban meja: 50.000 kg Daya spindle: 43 kW Kecepatan spindle: 5.000 rpm Taper spindle: 50ISO/Bt/Mk Kecepatan umpan sumbu X: 35.000 mm/menit Kecepatan umpan sumbu Y: 35.000 mm/menit Kecepatan umpan sumbu Z: 35.000 mm/menit Kepala milling auto-index: Ortogonal 1° Jam kerja: 3.500 jam Panjang: 22.000 mm Lebar: 5.000 mm Tinggi: 4.900 mm Berat: 31.000 kg

Kondisi: bekas, Butler Elgamill CNC Mesin Milling Tipe Bed Kolom Bergerak X 5000mm Meja berbentuk T 8.000mm x 1030mm Perjalanan kolom X 6.200mm (TBC) Hfsdpfxoyx Hv Ao Akvjn Perjalanan ram Y 1.250mm (TBC) Perjalanan vertikal kepala Z 1.950mm (TBC) Kecepatan spindle bervariasi, maksimal RPM (TBC) Taper spindle 50 Daya motor spindle HP (TBC) Feed power horizontal dan vertikal 6 – 500 mm/menit Gerakan cepat untuk semua sumbu 2.000mm/menit Dilengkapi dengan: Kontrol CNC Heidenhain Kepala pengindeks manual Data Mesin: Berat mesin 20.000kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 50052, Rok výroby: 1970 Výrobní číslo: 50 052 Stroj byl repasován v roce 2007 OBECNÉ CHARAKTERISTIKY STROJE Základní vlastností stroje je pevný portál a posuvný stůl. Portál má výškově nastavitelný příčník, který je vybaven jedním nebo dvěma svislými vřeteny v provedení VF 120. Portál je dále vybaven jedním nebo dvěma bočními (horizontálními) vřeteníky VF 160. Upínací plocha stroje se skládá ze dvou propojených upínacích stolů, které lze po odpojení používat i samostatně (vždy je funkční pouze jeden). Upínací stůl Rozměry jednoho stolu: 1 600 x 3 000 mm Celková délka propojených stolů: 7 000 mm Upínací plocha propojených stolů: 6 500 mm Upínací drážky (šířka x rozteč x počet): 28 mm x 160 mm x 9 ks Hsdpfxexxwy Ao Akvofn Výška pracovního stolu od základny: 900 mm Podélný posuv 1 stolu: 3 000 mm, (propojené stoly 6 500 mm) Pracovní posuv stolu: 20 – 2 000 mm/min Rychloposuv: 4 000 mm/min Portál s výškově nastavitelným příčníkem Průchod mezi stojany: 2 020 mm Výškové nastavení příčníku: 110 - 1 685 mm Posuv příčníku: 1 450 mm/min VF 160 horizontální vřeteník Upínací kužel: ISO 60 Výkon vřeteníku: 30 kW Rozsah otáček: 15 – 710 ot/min Pracovní posuv: 10 – 2 000 mm/min Počet stupňů: 16 VF 120 vertikální vřeteník Upínací kužel: ISO 50 Výkon vřeteníku: 18 kW Rozsah otáček: 28 – 910 ot/min Počet stupňů: 16 Celkové rozměry stroje (délka x šířka x výška): 14 780 mm x 5 650 mm x 4 800 mm

Kondisi: bekas, Tahun pembuatan: 2007, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, kecepatan rotasi (maks.): 5.000 rpm, SPINDLE INTERFACE ISO 50 X-AXIS TRAVEL: 6000 MM Z-AXIS SLIDE TRAVEL: 1250 MM Y-AXIS VERTICAL TRAVEL: 2000 MM SPINDLE SPEED: 5000 RPM FEED RATE: 8000 MM/MIN SPINDLE MOTOR POWER: 37 KW CNC: HEIDENHAIN iTNC 530 REMOTE CONTROL PANEL STOLLE TABLE: 7000x2000 MM, LOAD CAPACITY 15 TON/M² RAISED TABLE: 1080 X 7220 X H 820 MM TOOL CHANGER WITH 40 POSITIONS CHIP CONVEYOR Hsdpswz H Rfjfx Akvjfn CONTINUOUSLY POSITIONING HEAD TUPC 0.001°x0.001° INTERNAL SPINDLE COOLANT 20 BAR RTCP FPT AUTOCAL FUNCTION EXTERNAL HIGH AND LOW PRESSURE COOLANT TANK WITH PAPER FILTER NO.2 AUTOMATIC HORIZONTAL DIVIDERS WITH NO.2 SUPPORT TABLES NO.1 PART PROBE

Kondisi: sangat baik (bekas), Travel distances • X-axis (bed): 16,000 mm • Y-axis (vertical): 2,100 mm o Option Y = 3,100 mm • Z-axis (spindle head): 1,200 (1,500) mm Control system • CNC Control: Siemens Sinumerik 840 C o Option: Conversion to Heidenhain iTNC 530 o Option: Conversion to Heidenhain TNC 640 o Option: Conversion to Siemens Sinumerik 840 SL Feed speed • X, Y, and Z axes stepless: 2 – 12,000 mm/min Universal milling head in orthogonal design • Headstock swivel range: 340 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Spindle speed: 2,800 rpm Clamping table • T-slots: 28 H7 • T-slot spacing: 250 mm • Clamping surface: 18,000 mm x 1,500 mm Chip conveyors (2 units) • Discharge height above floor: 1,250 mm CNC rotary tables (4 units) • Clamping surface diameter: 1,250 mm Coolant system • Paper band filter unit o Tank capacity: 3,000 l General overhaul in 2016 • Year of manufacture: 1996 • General overhaul by MBM in 2016 Hfedpfxenvd Tno Akvon About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include spare part deliveries, on-site customer service, machine overhauls, and CNC control upgrades. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - Control modernization _____ _____ _____ Used machine – used milling machine – used travelling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used fraesmaschine – used cnc milling machine – used drilling and milling machine – used metal milling machine – used metal miller – used metal milling machine – used cnc mill – cnc milling machines – cnc fraesmaschinen – cnc milling machines – milling machine – large part machining – cnc large part machining – milling – shw – uf6 – uf 6 – Uniforce – SHW UF – SHW Uniforce – SHW Uniforce 6 – UFZ 6 – UFZ6L – UFZ 6 L – Heidenhain – MBM milling machine – MBM machine – column milling machine

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 8.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 2.500 mm, kecepatan spindel (maks.): 3.000 rpm, kecepatan rotasi (maks.): 3.000 rpm, jenis arus masuk: tiga fasa, pasokan pendingin: 15 batang, daya motor spindle: 33.000 W, produsen pengendali: HEIDENHAIN, model controller: 430 CA, daya: 0,033 kW (0,04 hp), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, ANAYAK HVM 9000 – CNC Travelling Column Milling Machine | 8300 mm X-Axis Travel | Refurbished Hfsdeqpd D Ijpfx Akven Large CNC milling machine, workshop-refurbished, ideal for large workpieces, heavy-duty machining, and guaranteed precision. Equipped with HEIDENHAIN control and numerous technical upgrades. 🛠 Main technical specifications: • X-axis travel: 8,300 mm • Y-axis travel: 2,000 mm • Z-axis travel: 2,500 mm • Spindle head: 33 kW – 3,000 rpm • Spindle mount: ISO 50 DIN 69871-B • Automatic tool changer: 30 tools • Additional axes: Automatic B and C axes • CNC control: HEIDENHAIN TNC 430 CA • Internal coolant: 50 l/min at 15 bar • External coolant: 100 l/min 🔧 Complete retrofit performed: • Grinding and adjustment of Y-axis and column slideways • Replacement of spindle head bearings, pinion, and gears • Overhaul of electrical cabinet and motor wiring • New bellows, cable carriers, and drive system • Machine tested, documented, and ready for operation. ✅ Ideal applications: • Machining of large structures • Heavy-duty and power generation industries • Railway, wind energy, shipbuilding, or large mould manufacturing 📌 Available for immediate delivery. Power, reach, and precision in a single machine.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK Hedpfx Asyr Dmdekvofn X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Tahun pembuatan: 1999, Kondisi: baik (bekas), Used travelling column bed-type milling machine > Manufacturer: Kekeisen Hfedpfxom Twc Ts Akvon > Model: 1200/8 > Year of manufacture: 1999 > Equipped with Heidenhain TNC 426 > Spindle taper: SK40 > With 30-position automatic tool changer > Spindle speed: 20–7300 rpm > Rapid traverse: 0–30 m/min > Travels > X-axis: 1200 mm > Y-axis: 500 mm > Z-axis: 800 mm > Milling head automatically swivels to vertical and horizontal positions > Drive power: 28 kW > Weight: 12 t

Kondisi: bekas, Tahun pembuatan: 2004, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.500 mm, jarak gerak sumbu Z: 1.400 mm, CNC HEIDENHAIN iTNC 530 PERGERAKAN SUMBU X 6000 MM Hfodoxhqivjpfx Akvjn PERGERAKAN SUMBU Y 1400 MM PERGERAKAN SUMBU Z (VERTIKAL) 2500 MM SPINDEL MOUNTING ISO 50 DIN 69871-B50 PUTARAN SPINDEL 5000 RPM DAYA MOTOR S1 37 KW - S6 56 KW KEPALA OTOMATIS INDEXASI 1° X 2,5° PENUKAR ALAT 40 SLOT PENDINGIN INTERNAL DAN EKSTERNAL PEGELUAR SERPIHAN MEJA PENJANGKARAN 8000 X 2000 MM PELINDUNG PERIMETER

Kondisi: bekas, Tahun pembuatan: 2002, de-to-hu-001 Hjdjyq Swujpfx Akvsfn

Kondisi: bekas, CNC travelling column drilling and milling machine ANAYAK Type HVM-3800-P Bed-type milling machine, design similar to a floor plate boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 "Refurbished 2025" The machine will be overhauled in 2025 and can then be inspected in stock at 37235 Hessisch Lichtenau. Travel distances: X: 3200 mm, Y: 1200 mm, Z: 1500 mm Table size: 3800 x 1200 mm T-slots: 8 slots, 22 mm, spacing 130 mm Table load: max. 25 tons (fixed table – virtually unlimited load capacity) Spindle taper: ISO 50 (DIN69871-A) (drawbar DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed speed: up to 10,000 mm/min, infinitely variable Rapid traverse X + Y: 20 m/min Rapid traverse Z: 10 m/min Spindle drive: 22 / 30 kW Power connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal head, fully automatic swiveling in two 45° axes – B+C axis - HEIDENHAIN iTNC 530 control with electronic handwheel - Prepared for wireless touch probe (probe and receiver not included) - Additional HF spindle 18,000 rpm – for mounting - Free-standing control cabinet - Chip conveyor mounted between the travelling column bed and the machine table - 32,078 operating hours read - Coolant system - Free-standing hydraulic unit - Operating manual with wiring diagrams Footprint: L x W approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Hedpexcgtgsfx Akvofn Good condition

Kondisi: bekas, Sumbu X (longitudinal) 800 mm Sumbu Y (transversal) 400 mm Hfedjw Tyyiopfx Akvjn Sumbu Z (vertikal) 300 mm Panjang meja 1340 mm Lebar meja 300 mm Kecepatan maksimum spindle 2500 rpm Daya motor spindle 3 kW Dimensi (P x L x T) 1800,0 × 2000,0 × 2080,0 mm Berat 2050 kg

Tahun pembuatan: 1997, Kondisi: bekas, Technical data Spindle taper ISO 50 DIN 69871 Longitudinal travel 3000 mm Saddle travel 1000 mm Cross travel 1000 mm Vertical travel 1500 mm Table dimensions 3500x920 mm Spindle speed 4000 rpm Spindle power 27.5 kW Non-binding data to be verified Standard equipment SELCA 3045 CNC AUTOMATIC BI-ROTARY HEAD (AXIS A 1° - AXIS B 1°) TOOL CHANGER FOR HORIZONTAL AND VERTICAL OPERATION, 30 POSITIONS CHIP CONVEYOR Hsdjg Amzkepfx Akvsfn

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 16.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.500 mm, Head mounting station TUPC CNC micro-indexing head A-axis: 360,000 x 0.001 mm C-axis: 360,000 x 0.001 mm SELS spindle extension L=500 mm Hfsdoxpfkkopfx Akvjn CTS internal coolant supply ATC chain tool changer, 60 positions Hydrostatic guides Optional T-slot plates 5600 x 1875 mm (2x) + 4000 x 1875 mm X-axis travel: 16,000 mm Y-axis travel: 3,500 mm Z-axis travel: 1,500 mm Spindle power: 80 kW Spindle speed: 4,000 rpm Tool holder: SK59 ISO/BT/MK Feed rate X-axis: 25,000 mm/min Feed rate Y-axis: 25,000 mm/min Feed rate Z-axis: 25,000 mm/min Milling head auto-index: 2.5 x 2.5° Length: 24,000 mm Width: 6,500 mm Height: 6,500 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is offered in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract terms. We recommend verifying all critical details.

Kondisi: baik (bekas), KEK Kibbler Serial: 11818KIB Hfodpfx Aoxbib Dokven Kek Kibbler pre-breaker mill stainless, ideal untuk penggilingan kasar, dipasang pada rangka stainless, motor 7,5 kW, hopper stainless 80 kg, kecepatan variabel, dilengkapi dengan roda, 3 phase

Kondisi: bekas, Tahun pembuatan: 2003, EN-001 Hodpjtumqvofx Akvefn

Kondisi: diremaj di bengkel (bekas), jarak pergerakan sumbu X: 10.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.100 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 36 rpm, kecepatan rotasi (maks.): 6.000 rpm, kapasitas tangki: 1.200 l, EN: SHW Powerspeed 5 Travel distances • X-axis (bed): 10,000 mm • Y-axis (ram): 1,300 mm • Z-axis (vertical): 2,100 mm Control • CNC control: Heidenhain iTNC 530 Feed rates • X, Y, and Z axes: 30,000 mm/min • Acceleration: 3.5 m/s² Universal milling head in orthogonal design • Milling head rotation range tool holder: 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 - 6,000 rpm Chip conveyor • Conveyor length: 10,000 mm Coolant system • Tank capacity: 1,200 liters Please note: The images are sample images for comparison purposes only About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main area of expertise is tool milling machines. Our services include spare part deliveries, on-site customer service, machine overhauls, and control system upgrades. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization Hsdpfx Aev Dhw Tekvofn _____ Used machine - used milling machine - used travelling column milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - used milling machine - used cnc milling machine - used boring milling machine - used metal milling machine - used metalworking mill - used CNC mill - CNC milling machines - CNC mills - large part machining - CNC large part machining - milling - shw - PS5 - Powerspeed - SHW PSZ 5 - SHW Powerspeed 5 - Heidenhain - MBM milling machine - MBM machine - column milling machine

Tahun pembuatan: 1989, Kondisi: bekas, travel x-axis 1100 mm y-axis travel 600 mm z-axis travel 500 mm Control Heidenhain TNC 335 B* Tool holder SK40 Table surface - top 1650 x 700 mm Table surface - bottom 1870 x 300 mm Spindle speed: 3000 rpm Spindle drive approx. 9 kW *Control unit defective!!!!! Hodpfxsd Ih Rxo Akvofn Horizontal and vertical milling Head position change is manual-hydraulic Vertical head with quill, drilling depth 100 mm

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 9101, jarak lintasan sumbu Y: 4.600 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan rotasi (maks.): 6.000 rpm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Konfigurasi mesin: • PowerPortal4000 • Kepala frais diagonal 45° (C 0,01°/ A 0,01°) • Sistem kamera pada kepala frais diagonal SHW • Antarmuka kepala frais 4-titik Hirth • Heidenhain TNC 7 • Handwheel HR 550 FS • Optimasi Heidenhain untuk pemesinan 5-sumbu • X=pilihan bebas, Y=4.600 mm, Z=1.600 mm • ToolCenter dengan 90 alat • Sistem pendingin 2.500 l • Pompa pendingin 70 bar / 30 l/menit • Pergantian pendingin air-udara • Pistol pencuci di area kerja • Penggerak utama 75 kW hingga 6.000 rpm • Dudukan alat SK 50 BIG-PLUS • Penutup dan kisi-kisi lantai • Konveyor serpihan ganda • SHW-UniScan • Udara pengunci • Mode operasi 3 • Probe pengukur nirkabel Hexagon Hfedpfeygtnasx Akvon • Lampu LED area kerja • Kamera kedua di area kerja

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 620 mm, jarak gerak sumbu Z: 520 mm, berat benda kerja (maks.): 2.000 kg, model controller: Heidenhain iTNC 530, DETAIL TEKNIS Perjalanan sumbu X: 2.000 mm Perjalanan sumbu Y: 620 mm Perjalanan sumbu Z: 520 mm Berat benda kerja maks.: 2.000 kg Panjang alat maks.: 330 mm Diameter alat maks.: 80/125 mm Penjepitan alat: pegas piringan Jumlah tempat alat: 30 Tinggi meja: 860 mm Luas penjepitan: 2.500 x 600 mm Lebar alur T: 18 mm Jarak antar alur T: 100 mm Jumlah alur T: 5 Jarak hidung spindel ke meja: 100 - 620 mm Rentang putaran: 30 - 8.000 rpm Torsi maks.: 198 Nm Pergerakan cepat X/Y/Z: 45.000 mm/menit DETAIL MESIN Hjdeyvt Sxspfx Akvefn Kontrol: Heidenhain iTNC 530 Dimensi & Berat Dimensi (P x L x T): 5.400 x 3.300 x 3.000 mm Berat mesin: 10,5 t Kapasitas cairan pendingin: 250 l

Kondisi: baru, 2TR19H C3 FP KOYO BEARING ROLLER KERUCUT BARU Dimensi: 482,60 x 615,95 x 184,15 mm Berat: 150 kg LIKUIDASI GUDANG BEARING TAMBAHAN TERSEDIA: NP342204-90WA2 TIMKEN x14 unit 22324 EDK FAG x2 71976MP.P5.UO FAG x1 23276 BMB FAG x2 23222-E1-A-K-M FAG x1 Hodsqpgc Njpfx Akvjfn 23224 HL BM S x1 F36204 FAG x3 STF374KV5051GAS3 NSK x3 2456 CPM ITALIA x47 NP838887 TIMKEN x2255 R425-1G4S7 NSK x2 2TR19H C3 FP KOYO x1 31318F FERSA x165 NP942053-902-A1 TIMKEN x12 2TR19H C3 FP KOYO x1 24168-B-C3 FAG x2 01/02/0274/C5309 x2 NNU6810 NTN x3 612833-B SKF x6 CP354256-90001 TIMKEN x2 NU2324 EC ML SKF x1 23238C E4 S11 NSK x4 2IE.083.00 x2 SL182244-BR-A INA x1 23088-K.MB.R1000.1130.J15B FAG x2 612833-B SKF x6

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7853, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 1.200 mm, jarak gerak sumbu Z: 2.000 mm, kecepatan spindel (maks.): 3.000 rpm, model controller: Heidenhain TNC 426 C, Tidak ada harga minimal – dijamin terjual kepada penawar tertinggi! Pemuatannya dapat diatur oleh penjual dengan biaya €750! DETAIL TEKNIS Hedpfx Akezdtxfovsfn Perjalanan sumbu X: 4.000 mm Perjalanan sumbu Y: 1.200 mm Perjalanan sumbu Z: 2.000 mm Tipe spindle: ISO 50 Daya spindle: 50 kW Kecepatan spindle: hingga 3.000 rpm Panjang meja: 5.000 mm Changer alat: 30-slot ATC DETAIL MESIN Kontrol: Heidenhain TNC 426 C Kepala Dapat diputar: Otomatis Inkrementasi: 1 derajat / 2,5 derajat / tanpa langkah Dimensi & Berat Dimensi (P x L x T): 9.000 mm x 5.000 mm x 5.000 mm Berat: 35.000 kg PERLENGKAPAN Pemandu hidrostatik di semua sumbu Holder alat Sistem pemurnian/pemfilteran pendingin Konveyor serbuk Unit pendingin merek Deerosdassi Kabinet kontrol Catatan: Mesin sudah dibongkar secara profesional dan disimpan.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.700 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.050 mm, kecepatan spindel (maks.): 3.000 rpm, model controller: HEIDENHAIN iTNC530, Mesin dapat dilihat dalam kondisi operasional dengan listrik terhubung! DETAIL TEKNIS Perjalanan sumbu X: 2.700 mm Perjalanan sumbu Y: 1.000 mm Perjalanan sumbu Z: 1.050 mm Maks. feed X/Y/Z: 10.000 mm/menit Dimensi meja: 3.300 x 1.000 mm Alur T: 7 x 22 Kepala frais diagonal 2-sumbu: 1 x 2,5 Kecepatan spindle: 60 - 3.000 rpm Daya motor: 22/30 kW Tipe holder alat: ISO 50 (DIN69872-B) DETAIL MESIN Kontrol: HEIDENHAIN iTNC530 Pendinginan melalui spindle: 19 bar PERLENGKAPAN Panel kontrol geser di depan mesin Pelindung dengan pintu depan Dokumentasi mesin Sistem pendingin dan pembuangan serbuk Hfodpfxezg Dq De Akven Konveyor rantai memanjang

Kondisi: baru, Tahun pembuatan: 2026, Completely overhauled, as-new machine, upgraded to the legally required current safety standard 'state of the art,' in accordance with the Operational Safety Ordinance of the Employers' Liability Insurance Association. Control Cabinet Electronics Installation of a new CE-compliant control cabinet according to the latest statutory requirements of the Employers' Liability Insurance Association: BGVA 3 / DIN-EN 60204-1, new machine standard. Optional: The entire machine can be supplied in CE configuration. Hedpfxoh Sptns Akvjfn A CE Declaration of Conformity will be issued for the machine, making FPS Werkzeugmaschinen GmbH the official manufacturer. This ensures compliance with the OPERATIONAL SAFETY ORDINANCE (BetrSichV). The machine's year of manufacture is thus equivalent to the delivery date. Standards complied with: EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control 3-axis FPS Active digital display Speed 25 - 2500 rpm, geometrically stepped direct gearbox with 18 speed settings for maximum torque / milling performance Feed 5 to 500 mm/min, stepless adjustment Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 100 mm, SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Travel X/Y/Z: 800/300/400 mm Table Fixed angle table 1000x440 mm, load capacity 2000 kg Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90 ° Options • Z-axis bellows • Chip tray • Machine light • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc.