Beli mesin frais portal bekas (137)

Kondisi: hampir baru (bekas), Tahun pembuatan: 1998, en_to_de Fedpfxsyf Rq Aj Aaqegb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2013, Fungsionalitas: berfungsi sepenuhnya, Datron M8 Kontrol Datron V9 Tahun pembuatan: 2013 Spindle HF 3KW dengan penahan alat HSK E25, 1000 rpm hingga 40000 rpm Unit pendingin spindle HIB HF 2 x penukar alat 5-posisi Fjdpfeyzbmhex Aaqsgb 3D probe Renishaw Probe panjang alat Sistem pelumasan minimum Microjet Meja vakum ukuran 1000mm x 700mm Distribusi vakum 2 arah Perangkat lunak: V9 • Area terlindungi • Pemantauan alat (jarak + waktu) • Penghalusan • Filter pembacaan untuk G-Code Mesin dalam kondisi sangat baik.

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: fungsi terbatas, CNC gantry milling center (Milling/Turning Center) | Manufacturer: DÖRRIES SCHARMANN | Model: 4FZT | Year of manufacture: 1996 A high-performance gantry milling machine designed for the machining of large workpieces. The primary areas of application are milling and turning of large, complex components. The machine can be inspected under power by appointment. Condition: According to its year of manufacture; partial overhaul is required in some areas. A very high-quality machine, therefore absolutely worthy / strongly recommended for modernization or complete overhaul. TECHNICAL DATA: Main dimensions: - Machine width: 13,230 mm - Machine height above floor: 8,450 mm - Machine length: 31,100 mm - Machining length: 11,000 mm - Clearance width: 4,400 mm - Clearance height from table surface to spindle nose of standard milling head: 3,000 mm Table: - Table width: 3,450 mm - Total table length: 13,400 mm - Single table length: 6,200 mm - Total clamping area: 3,450 x 11,000 mm - Clamping area per single table: 3,450 x 5,000 mm - Maximum permissible workpiece weight on total table: 112 t - Maximum permissible workpiece weight on single table: 80 t Crossbeam: - Travel: 2,000 mm Milling and drilling slide: - Drive power for milling and drilling (spindle): 80 kW - Max. spindle speed: 2,500 rpm EQUIPMENT / ACCESSORIES: - 2 tables - 8 machining heads - CNC control: SINUMERIK 880 - 2 chip conveyors - Documentation - CE mark No guarantee regarding the completeness or accuracy of technical data and equipment details. – Subject to prior sale – Fgjdpfx Aaeyuptzoqsb A detailed technical data sheet and further equipment information are available on request.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2004, Retrofit: 2026 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical specifications Dimensions Table dimensions: 5600 x 2000 mm Number of T-slots: 13 T-slot size: 22 mm Axis travels X-axis travel: 5000 mm Y-axis travel: 3250 mm Z-axis travel: 1000 mm Vertical clamping capacity: 450 / 1450 mm Fgedpfx Asyf Rq Neaqjb Distance between columns: 2700 mm Milling head Auto-indexing differential head (UAD - 0.1º) Tool clamping system: Hydraulic Spindle taper: ISO50 (DIN69871) Pull stud: DIN69872 Spindle speed: 6000 rpm Spindle power: 30 kW Feed rates Rapid traverse (X / Y, Z): 7200 / 12000 mm/min Weight and dimensions Maximum weight on table: 25,000 kg Approx. machine weight: 56,000 kg Approx. machine dimensions: 13,200 x 5,425 x 5,350 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh Automatic tool changer: Optional Chip conveyor: 1 transversal hinge type Electronic handwheel: New HR-510 Coolant system: External & internal high pressure through spindle Sales conditions Warranty: 6 months on mechanical spare parts Price and terms of sale: On request View all technical specifications.

Kondisi: baik (bekas), jarak pergerakan sumbu X: 12.000 mm, jarak lintasan sumbu Y: 7.300 mm, jarak gerak sumbu Z: 3.000 mm, panjang total: 30.000 mm, panjang meja: 12.000 mm, lebar meja: 4.730 mm, lebar total: 12.000 mm, tinggi total: 10.475 mm, beban meja: 250.000 kg, berat keseluruhan: 400.000 kg, Portal Milling Machine WALDRICH SIEGEN - PF-F-150 Fsdpfjytrxksx Aaqsgb Make: Waldrich-Siegen Model: PF-F-150(1)-530/400 Travel (X-axis): 12,000 mm Travel (Y-axis): 7,300 mm Travel (Z-axis): 3,000 mm Travel (W-axis): 4,000 mm Distance between columns: 5,000 mm Table width: 4,730 mm Table length: 12,000 mm Table load capacity: 19 t/m – approx. 250 t total Table feed rate: 10,000 mm/min W-axis feed rate: 3,000 mm/min T-axis feed rate: 6,000 mm/min Transversely adjustable milling head Vertically adjustable crossbeam Horizontal hydrostatic ram Milling spindle Ø: 560 mm Tool holder: ISO 60 C-axis feed rate: 5,000 mm/min Milling motor: 90 kW Spindle speed: 2,500 rpm Z-axis travel: 3,000 mm Z-axis feed rate: 2,000 mm/min Küma angular head WF2 – 90 kW – 450 rpm Küma universal milling head UB1D – 60 kW – 2,400 rpm Küma fixed head GB1D – 90 kW – 2,400 rpm Küma angular head WF1 Power supply: 3 × 400 V / 50 Hz Power requirement: 600 kVA / 630 Amp Coolant system: 4,000 liters – Coolant through the spindle 20 / 40 bar Machine overhauled in 2004 by Schiess Bed – Table group: - Renewal of slideways - Regrinding of guideways - Renewal of table drive - Direct linear measuring system - Hydrostatic guideways Gantry and crossbeam: - Modification of adjustment spindle - Trapezoidal spindle replaced by ball screw - Direct linear measuring system - New drive motors to increase feed speed of milling axes - New milling ram with hydrostatic guides Electrical system: - Complete new control cabinet - Complete new wiring - Siemens Sinumerik 840D control – 6 axes Equipment: - Completely new Raumag-Janich protective covers - Completely new double chip conveyor - Large tooling package - Extensive clamping devices Machine under power in Europe Available immediately Controlled axes: X / Y / Z / W / C / B Overall height: 10,475 mm Overall width: 11,934 mm Overall length: 30,000 mm Total weight: approx. 400,000 kg Completely overhauled in 2004 for EUR 2,200,000! This CNC portal milling machine from Waldrich was used in the energy sector for machining steam turbine housings. Please note: The information on this page has been prepared by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is supplied in good faith but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contractual terms. We recommend that you verify all important details.

Kondisi: baru, Portal machine – the space miracle! CNC gantry milling machine for large travel distances with minimal footprint! ADVANTAGES: • Optimal use of space, completely unobstructed clamping area on the table • Superior chip protection thanks to top-mounted axes • Especially suitable for tall and bulky components FEATURES: - Gantry function on Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors on all axes - Backlash-free set steel ballscrew drives with steel linear guides - T-slot table for easy clamping of workpieces and accessories - Clamping area from 1100x1000 to 1750x2000 mm Fgjdpfjhqhlvox Aaqsb - Variable clearance from 340 mm to 590 mm - Spindle motors iSA 500 / 750 / 1500 / 1500L as well as iSA 900 / 1500W / 1500WL / 2200 - Speed: up to 250 mm/sec possible - PILZ safety technology - Effortless operation via height-adjustable CNC panel - Network-capable control PC with WINDOWS - Parallel sliding door - Workpiece clamping via T-slot plate - Variable gantry clearances depending on customer application DESIGN: Gantry: moving, Table: fixed APPLICATIONS: • Machining • Measuring and inspecting • Dispensing applications SUITABLE FOR PROCESSING: • Aluminium / Light metals • machinable plastics • Ceramics • Non-ferrous metals (brass, bronze, etc.) • Plastics • Wood Optimal use of space with the smallest possible footprint. Limited space but require maximum travel? We have the answer. Our Overhead machine series offers maximum travels on a compact footprint. All drives are mounted on the upper part of the machine, keeping the machine table completely free for your individual applications. With a wide range of variable features and additional options, the CNC machine can be optimally configured for many industries and applications. In addition to machining, the OverHead Gantry M is also ideal for measuring, inspection, and dispensing tasks. With spindle power up to 2.2 kW, 20,000 rpm, and travel speeds up to 250 mm/sec, it is suitable for woodworking and plastics as well as for light alloys and non-ferrous metals. The unobstructed working area and excellent price/performance ratio offer decisive advantages over comparable products. The OverHead Gantry M is available in five sizes for various travel ranges from M20 to M50. Need the control cabinet on the right side or prefer the control unit on the left? No problem—we are happy to accommodate your requests and naturally take care of maintenance and support for your OverHead Gantry M. Our service technicians are available by phone and can be quickly on-site if required. We also offer our in-house software isy-CAM 2.8 and can provide advice tailored to your specific application. Many options available on request!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, Technische Daten dieser Brücken-Bearbeitungsmaschine Hersteller: ZAYER Modell: KPU-5000 AR Baujahr: 11/2001 CNC-Steuerung: HEIDENHAIN TNC-430 Aufspannfläche: 6.500 x 1.800 mm Längsverfahrweg (X-Achse): 6.500 mm Querbewegung (Y-Achse): 3.050+873 mm Vertikalhub (Z-Achse): 1.250 mm Abstand zwischen den Ständern: 2.450 mm Max. Abstand zwischen Spindel und Tisch bei Kugelkopf: 1.565 mm Max. Abstand zwischen Spindel und Tisch bei 45° Kopf in Vertikalstellung: 1.574 mm Eilgang (X, Y, Z): 25.000 mm/min Max. Vorschubgeschwindigkeit: 15.000 mm/min Köpfe: 45° Automatik-Kopf – ENTHALTEN (A-/B-Achse, 360.000 Positionen) Automatischer 45° Kopf Aufnahme: ISO-50 – DIN 69871 Drehzahl automatischer 45° Kopf: 6.000 U/min Kugelrotationskopf: ENTHALTEN Direktausgangskopf: ENTHALTEN Aufnahme: ISO-50 Hauptantriebsleistung: 37 kW Drehzahlbereiche: 2 Manueller Werkzeugwechsel: INKLUSIVE Automatische, einschiebbare Stütze rechts für 45° Kopf: ENTHALTEN Automatische, einschiebbare Stütze rechts für Direktausgangskopf: ENTHALTEN Ethernet-Anschluss: ENTHALTEN Doppel-Späneförderer: ENTHALTEN (je eine pro Seite) 1.000 l Öltank mit Filterpapier und Magnetabscheider: ENTHALTEN Innenkühlung 20 bar: ENTHALTEN Außenkühlung 10 bar: ENTHALTEN Automatischer Werkzeugwechsler: ENTHALTEN Werkzeugplätze ATC: 60 Fjdpeyxv Unjfx Aaqogb CNC 3D ROT Funktion: ENTHALTEN Sonstiges: Positioniergenauigkeit: 0,010 mm Wiederholgenauigkeit: 0,005 mm Handrad: HEIDENHAIN HR-410 Belastbarkeit Tisch: 20.000 kg Maschinengewicht: 52.000 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, kecepatan spindel (maks.): 25.000 rpm, model controller: 2000, jumlah sumbu: 3, This 3-axis portal milling machine, MIKROMAT 8V, was manufactured in 2000. It is equipped with an Andronic 2000 control system, automatic tool changer (ATC-16P) with 16 positions, and a high-speed spindle reaching up to 30,000 rpm in short bursts. The machine features a BLUM laser system for precise tool monitoring and measurement, as well as a Knoll scraper-belt conveyor for efficient chip removal. Take advantage of this opportunity to acquire the MIKROMAT 8V portal milling machine. Contact us for further information about this unit. Additional Equipment • Scraper-belt conveyor with discharge height of 1200 mm • Temperature-stabilized control cabinet with high-performance cooling unit Machine Advantages Technical Machine Advantages • Automatic tool changer type: ATC-16P • HSK 100 spindle taper • Blum laser system for tool monitoring and measurement • Andronic 2000 control system • High-speed spindle with a maximum rotational speed of 25,000 rpm Additional Information Logging of measurement results via the touch screen display Andronic 2000 control system with automatic tool changer type: ATC-16P and working area safeguarding Includes 1 high-speed spindle Complete with torque support Spindle speed for automatic tool changer: nmax for dry run Continuous operation: 25,000 rpm At 10% duty cycle: 30,000 rpm Reference time: 1 hour Reduction ratio: 1:7.5 Machine spindle holder: DIN 69 893 HSK 100, 1 piece Scraper-belt conveyor for short-chipping materials Discharge height: 1,200 mm Brand: Knoll Measurement result logging via touch screen display, 1 piece BLUM laser system Tool monitoring and measurement, 1 piece Temperature stabilization Control cabinet with high-performance cooling unit Fodpfxox D Dyms Aaqegb Note: The rotary table (work spindle) visible in the photos has been decommissioned and is not available as a rotary table.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, jarak pergerakan sumbu X: 900 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 200 mm, kecepatan spindel (maks.): 24.000 rpm, berat keseluruhan: 545 kg, daya motor spindle: 4.000 W, jumlah sumbu: 3, This 3-axis T-Rex Servo-0609 was manufactured in 2023. It is a CNC gantry milling machine featuring KinetiC-NC control and PC software. The traversing distances are 900 mm (X) × 600 mm (Y) × 200 mm (Z). It is equipped with a Hiteco 4.0 kW ATC spindle, air-cooled, with a speed of 24,000 rpm and an automatic 4-position tool changer. Take advantage of the opportunity to purchase this T-Rex Servo-0609 gantry milling machine. Contact us for more information about this machine. Additional Equipment • Accessories: Electronic handwheel, gigabit network switch (5 ports) Machine Advantages Fgsdpfex H A Nnjx Aaqeb Technical Machine Advantages • Drive: Servo motors with automatic lubrication • Clamping system: Vacuum table with T-slot rails • Tool changer: 4-position changer (ISO30), automatic (ATC) • Tool holders: 6× SK30/ER32 with nuts and pull studs • Single collet ER32 (3.175 mm, 0.0006" runout accuracy) • Vacuum generation: Side channel blower 2.2 kW (520 mbar, 155 m³/h) • Transport: Carton dimensions: 175 × 180 × 200 cm Additional Information Machine still under power

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1998, tinggi total: 4.900 mm, berat keseluruhan: 51.000 kg, produsen pengendali: SIEMENS, model controller: SINUMERIK 840D, This 4-axis gantry milling machine MIKROMAT 20V was manufactured in 1998. Ideal for precision milling, it features a robust construction and reliable performance. Take the opportunity to acquire this MIKROMAT 20V gantry milling machine. Contact us for further information. Additional Equipment • Automatic Tool Changer: Included / Number of magazine positions: 90 / Max. tool diameter: 125 mm (300 mm with free adjacent positions) / Max. tool length: 450 mm / Max. tool weight: 30 kg / Tool change time: approx. 5 sec. • Compressed air connection / Air supply: 6 bar - 5 m³/h / Rated voltage: 3 AC 400 V / Control voltage: DC 24 V / Connected load - basic machine: 65 kW Fjdpfx Asx D Hcwoaqjgb • Coolant supply and filtration system: Included / Tank capacity: 1500 l / External cooling pump: Q = 20/40/60 l/min, switchable / Internal cooling pump: Q = 35 l/min at 50 bar Working area protection with lighting: Included / Chip conveyor system: included, with scraper belt, discharge height 1000 mm Machine Advantages Technical Machine Advantages • Travel (X-table): 5200 mm / (Y-slide): 3400 mm / (Z-spindle): 1250 mm • Maximum feed force (X, Y, Z): 15 kN • Clamping surface: 2000 x 5000 mm / Maximum table load: 100 kN / Width / spacing of T-slots: 22 / 160 mm / Clearance width: 2400 mm / Distance between spindle nose and table surface: 500 to 1750 mm • Spindle speeds: 10 to 5000 rpm / Max. spindle motor power: 37/46 kW / Max. spindle torque: 1000/1250 Nm / Spindle head for tool shank: SK 50 • Control type: Microprocessor control Siemens Sinumerik 840D / Display: Color screen 10.4 inch TFT display / Number of axes: 3 (X, Y, Z) • Control: Integrated with a variety of functionalities such as spindle orientation, interpolation, and electronic handwheel • Programming and data transfer: Comprehensive programming and data transfer capabilities via the universal interface V24/RS-232 • Accessories: Extensive accessories and additional equipment features focusing on improved efficiency and safety Dimensions Machine Depth: 10,500 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, jam operasional: 29.081 h, Fungsionalitas: berfungsi sepenuhnya, FPT Industrie S.p.A. – Travelling Column/Portal Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control System: Heidenhain TNC640 (15") Fgedpfx Aajyrndmeqsb RAM: 4 GB Hard Disk: 32 GB (min. 21 GB program storage) Resolution: Linear axes up to 0.1 µm / Rotary axes up to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, simultaneous movement of 2 axes) Max. Spindle Speed: 18,000 rpm Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Working Torque A/C: 450 Nm Axis Clamping Torque: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel, with changer arm) Magazine Capacity: 80 Max. Tool Ø: 75 mm Max. Tool Ø with free adjacent pocket: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage detection (software included) Probe for workpiece measurement/alignment: Wireless transmission, cycles included in CNC Monitoring Sensor for vibration/collision detection: Response time approx. 1 ms Coolant System external/internal (LEU/LEIUHP) Tank Volume: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar ICS (Internal Coolant Supply): max. 30 l/min, max. 70 bar Additional Options/Features External tool spray mist Compressed air through spindle (high speed) up to 24,000 rpm

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 7.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 2.000 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 18.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 38 Nm, berat keseluruhan: 65.000 kg, First commissioning: 2012 Control system: Heidenhain iTNC 530 X-axis: approx. 7,000 mm Y-axis: approx. 3,500 mm Z-axis: approx. 2,000 mm A-axis: ±100° C-axis: ±360° Clamping table: 6,000 x 3,000 x 160 mm (sunken) with T-slots 18H12 / 250 mm Fgjdjyrdc Eopfx Aaqsb 2-axis milling head VH 12 Spindle power: 24 kW Spindle speed: max. 18,000 rpm Torque: max. 38 Nm Tool holder: HSK 63A Linear axis drives Feed rate X, Y, and Z axes: up to 50 m/min / 30 m/min Axis acceleration X, Y, and Z axes: up to 2.5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Main fuse: 200 A Power requirement: 85 kVA Dimensions, weights Machine footprint without peripherals: approx. 10,000 x 6,650 x 5,900 mm Total weight: approx. 65,000 kg Additional equipment - Double-sided opening doors - 10-position tool changer Optional at extra cost: - Wireless measuring probe - Heidenhain remote diagnostics Condition of the machine Fully functional, in very good condition. Can be inspected under power. !!! The machine was completely mechanically overhauled in 2022 !!!

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 68.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 2.200 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.200 mm, kecepatan pemakanan sumbu X: 50 m/menit, laju pemakanan gandar Y: 50 m/menit, laju pemakanan sumbu Z: 30 m/menit, kecepatan spindel (maks.): 15.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 30 m/menit, torsi: 167 Nm, berat keseluruhan: 35.000 kg, en-01 Fgjdeyrc Akopfx Aaqjb

Kondisi: baik (bekas), Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 4480, panjang total: 14.500 mm, lebar total: 7.800 mm, tinggi total: 3.500 mm, berat keseluruhan: 20.000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-Axis, 3-Axis, MBG8, 5x SNA Equipment: 5-Axis Unit with Cardanically Mounted Spindle: - Max. speed: 24,000 rpm - Nominal speed: 10,000 rpm - Power rating S1*: 15 kW - Max. power rating S6: 20 kW - Torque in S1*: 14.5 Nm - Torque in S6: 19 Nm Fgjdpsywzq Sjfx Aaqsb - Rated voltage: 380 V - Rated current: 37 A - Rated frequency: 380 Hz - Speed infinitely programmable from 0 – 24,000 rpm in 1 rpm increments - Clockwise/counterclockwise rotation programmable - Drive via frequency converter - Maintenance-free - Water-cooled - Hybrid bearings - Automatic spindle stop during emergency stop - Spindle orientation for thread cutting - Tool holder: HSK-F63 hollow shank taper per DIN 69893-6 - Max. usable tool length from spindle nose: 240 mm - Max. tool weight: 6 kg 3-Axis Unit with Vertically Mounted Spindle: - Max. speed: 24,000 rpm - Nominal speed: 10,000 rpm - Power rating S1*: 15 kW - Max. power rating S6: 20 kW - Torque in S1*: 14.5 Nm - Torque in S6: 19 Nm - Rated voltage: 380 V - Rated current: 37 A - Rated frequency: 380 Hz - Speed infinitely programmable from 0 – 24,000 rpm in 1 rpm increments - Clockwise/counterclockwise rotation programmable - Drive via frequency converter - Maintenance-free - Water-cooled - Hybrid bearings - Automatic spindle stop during emergency stop - Spindle orientation for thread cutting - Tool holder: HSK-F63 hollow shank taper per DIN 69893-6 - Max. usable tool length from spindle nose: 240 mm - Max. tool weight: 6 kg 8-Spindle Boring Unit (1 piece): - L-shape, Grotefeld - Drill spindles: individually selectable - Rotational direction: right/left - Spindle pitch: 32 mm - Power: 2.5 kW - Speed: 5000 rpm fixed - Z + 75 - Mount: D = 10 mm H7 - Stroke: 80 mm Groove/Cut Unit (5 pieces): - GROTEFELD Angle Saw Unit F100-S - Working/milling stroke operated pneumatically - Drive: Three-phase motor with poly-V belt - LEFT version - Drive rotation: RIGHT/LEFT - Speed reduction: 1:2.86 – belt drive - Power: 2.20 kW – 220-240/380-415 V – 50 Hz - Speed: n1 = 2,800 rpm / n2 = 8,011 rpm at 50 Hz - Spindle power: 2.2 kW - Feed: 150 mm - Tool holder: ø30 x 1.5mm – 5.0mm - Rotation direction of tool holder: opposite to drive rotation - Feed force: 2,565 N Underfloor Drilling Unit in the Machine Bed (1 piece): - GROTEFELD Angle Milling Head G06-1.1-P - Working/drilling stroke operated pneumatically - Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz - Drive rotation: right - Gear reduction: 1:1.55 gear drive - Drive speed: 2,800 – 5,600 rpm - Tool spindle speed: 4,340 – 8,680 rpm - Tool holder: 1x HI-Q/ERM25 DIN 6499-C (8°), for collet ER25 DIN 6499-B ø0.5-16mm max. - Rotation direction of tool holder: right - Flange clamping piece: FK45 - Feed slide: with pneumatic cylinder and dual steel guide rods - Feed: 80 mm

Kondisi: bekas, Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.150 mm, jarak lintasan sumbu Y: 1.850 mm, jarak gerak sumbu Z: 1.000 mm, kecepatan pemakanan sumbu X: 30 m/menit, laju pemakanan gandar Y: 30 m/menit, laju pemakanan sumbu Z: 24 m/menit, kecepatan spindel (maks.): 24.000 rpm, torsi: 87 Nm, CNC Fidia C20 WORKING ENVELOPE X-axis travel (longitudinal): 3,150 mm Y-axis travel (transversal): 1,850 mm Z-axis travel (vertical): 1,000 mm MAXIMUM AXIS SPEEDS X, Y axis feed rate: 30 m/min Z axis feed rate: 24 m/min WORKTABLE Clamping surface: 3,000 x 1,600 mm Maximum load capacity: 5,000 kg/m² T-slots: - 8 longitudinal H12 + 1 H8 - Width: 22 mm - Pitch: 160 mm ELECTROSPINDLE Maximum power (S6 60%): 55 kW Spindle speed range: 240 – 24,000 rpm Constant power range: 6,000 – 24,000 rpm Maximum torque: 87.5 Nm Tool holder: HSK-A63 C-axis travel: ± 200° C-axis speed: 2,000°/min C-axis offset relative to spindle axis: 75 mm A-axis travel: +95° / -110° Fgsdpfx Aajyw Tddoqjb A-axis speed: 2,000°/min Max. distance spindle nose - table surface: 1,175 mm Machine is equipped with: • 24-position tool magazine • Remote electronic handwheel • HMS system for head calibration • Various machine accessories • User and maintenance manual and CE conformity declaration

Kondisi: bekas, Travel in X-axis: 6500/13,150 mm Travel in Y-axis: 4000 mm Travel in Z-axis: 1250 mm Travel in W-axis: 2250 mm Control system: Sinumerik 840 D Clamping surface of table: 5500/12,150 x 3000 mm Passage between columns: 3500 mm Max. distance between work table and spindle nose: 3000 mm Max. workpiece weight: 70,000 / 105,000 kg Ram dimensions: 480 x 510 mm Spindle speeds – stepless: 6.3 - 4000 rpm Milling spindle motor: 63 kW Torque at the spindle: 3300 Nm Tool holder: DIN 39871 AD ISO 50 Feed rate X/Y/Z = 24,000 mm/min Fgedjwa Dx Ropfx Aaqsb Total power requirement: 120 kVA Machine weight approx. 245 t Required space approx. 29 x 7.7 x 8.1 m The machine is in almost as-new condition and was completely overhauled and modernized in 2020 for €1.6 million! Equipment/Accessories: - Automatic tool magazine for 153 tool positions - Automatic milling head magazine for 6 milling heads - Machining modules/milling heads:  Machining module – straight – straight long –  Machining module – angle standard – 4000 rpm, 144 x 2.5b0, ISO 50  Machining module – narrow extended angle – 40 kW, 4000 rpm, 1800 Nm, 144 x 2.5b0, ISO 50  Machining module – universal index – 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5b0, B-axis +/- 44 x 2.5b0, ISO 50 - Coolant system - Chip conveyor - Technical documentation

Kondisi: belum diuji (bekas), Tahun pembuatan: 2000, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 2259, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 3.500 mm, jarak gerak sumbu Z: 1.900 mm, kecepatan rotasi (maks.): 24.000 rpm, model controller: Siemens 840D, Tanpa harga minimum – penjualan dijamin kepada penawar tertinggi! DETAIL TEKNIS Perjalanan sumbu X: 6.000 mm Perjalanan sumbu Y: 3.500 mm Perjalanan sumbu Z: 1.900 mm Sumbu b: +/- 110° Sumbu c: 360° Putaran: 24.000 rpm Tipe spindle: HSK 63 Motor spindle: 25 kW Ukuran meja: 6.000 mm x 2.500 mm (pola lubang 22H7 / M16) Feedrate X + Y: 30.000 mm/menit Fgodpfx Aaeyv A Dksqob Feedrate Z: 28.000 mm/menit Rapid traverse: 30.000 mm/menit DETAIL MESIN Kontrol: Siemens 840D Penukar alat: 40 alat PERLENGKAPAN Spindle: Fischer (Tipe MFWS 1709/30, 2 unit) Kepala milling: Forest Line (Tipe: kepala garpu, sumbu b dapat diayunkan +/- 110°, sumbu c berotasi 360°) Conveyor serpihan Richter (conveyor scraper) Pengukuran alat Blum Stasiun penyimpanan kepala milling (2 unit)

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 4.000 mm, jarak lintasan sumbu Y: 2.200 mm, jarak gerak sumbu Z: 1.100 mm, panjang meja: 4.500 mm, lebar meja: 2.500 mm, kecepatan spindel (maks.): 22.000 rpm, CNC Heidenhain iTNC 640 WORKING RANGE X-axis longitudinal travel: 4,000 mm Y-axis transverse travel: 2,200 mm Z-axis vertical travel: 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 t/m2 T-slots for workpiece clamping: 28 mm DIN 650 (H12), complete with leveling elements. T-slot direction parallel to Y-axis movement. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE HOLDER Automatic universal head indexed at 360,000 positions (every 0.001°). The rotation movement is driven by direct drive motors and controlled by the CNC as a positioning axis. Automatic tool clamping. Allows for undercuts up to 10°. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum axis rotation speed: 30 rpm Maximum available torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Fsdpfxsyv In Ij Aaqogb Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK-A63 DIN 69893 HSK-A100 ELECTROSPINDLE WITH SEMI-AUTOMATIC CHANGE SYSTEM: Available spindle power (S1/S6): 37/43 kW Available spindle torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK-A100 DIN 69893 55-STATION CHAIN TOOL MAGAZINE, HSK-A100 / HSK-A63: Fixed floor-mounted chain magazine located at the rear of the machine, cased for operator protection, with vertical tool change arm and automatic tool preparation. “Fixed position” management. Hydraulic axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Number of tools: 30 Max tool diameter: 90 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 300 mm Max tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Number of tools: 25 Max tool diameter: 100 mm Max tool diameter with adjacent spaces empty: 160 mm Max tool length: 450 mm Max tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine is equipped with: - Heidenhain HR550 remote electronic handwheel - High-pressure coolant and air through the spindle - Semi-automatic change of electrospindle, with HSK-A63 and HSK-A100 interface - Various tooling included with the machine - Renishaw probe - BLUM laser presetter - AUTOCAL automatic head calibration system - Visormax subscription for remote monitoring - Electrical cabinet air conditioning - Cooling system for all axes and the electrospindle - User and maintenance manual and CE certificate of conformity

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 2.700 mm, jarak gerak sumbu Z: 1.500 mm, laju pemakanan gandar Y: 50 m/menit, panjang meja: 6.000 mm, lebar total: 3.000 mm, kecepatan spindel (maks.): 22.000 rpm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, hidung spindel: hsk 100, CNC Heidenhain iTNC 640 WORKING AREA X-axis longitudinal travel: 6,000 mm Y-axis cross travel: 2,700 mm Z-axis vertical travel: 1,500 mm Maximum feed rate with interpolating axes: 50 m/min WORK TABLE Dimensions: 6,000 x 3,000 mm Height: 300 mm Load capacity: 15 T/m² T-slots for fixture clamping: 28 mm, DIN 650 (H12), supplied with leveling bolts. T-slot direction parallel to Y-axis travel. CONTINUOUS POSITIONING UNIVERSAL HEAD WITH ELECTROSPINDLE INTERFACE Universal automatic head indexed to 360,000 positions (increments of 0.001°). Rotary motion is direct-drive motor controlled, with CNC position axis feedback. Automatic tool clamping. Allows 10° undercut. Internal cooling system for bearings and axis motors. C-axis rotation range: +/- 270° A-axis rotation range: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Clamping torque of axes: 1,400 Nm Spindle motor power (S1/S6): 22/33 kW Fodpfx Aaoyvtt Neqogb Spindle motor torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool interface: HSK – A63 DIN 69893 ELECTROSPINDLE HSK – A100 WITH SEMI-AUTOMATIC CHANGE SYSTEM: Spindle motor power (S1/S6): 37/43 kW Spindle motor torque (S1/S6): 140/165 Nm Maximum spindle speed: 12,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool interface: HSK – A100 DIN 69893 CHAIN TOOL MAGAZINE 55 POSITIONS, HSK – A100 / HSK – A63: Stationary chain magazine mounted at the rear of the machine, enclosed for operator protection, with tool change arm in vertical position and automatic presetting. Fixed-position management. Hydraulically actuated axis clamping Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 pcs Max. tool diameter: 90 mm Max. tool diameter (with adjacent pockets free): 160 mm Max. tool length: 300 mm Max. tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 pcs Max. tool diameter: 100 mm Max. tool diameter (with adjacent pockets free): 160 mm Max. tool length: 450 mm Max. tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum current required: 235 A Machine equipped with: • Remote electronic handwheel Heidenhain HR550 • High-pressure water and air through spindle • Semi-automatic electrospindle change system, with HSK – A63 and HSK – A100 interface • Various tooling included • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioner • Cooling system for all axes and the electrospindle • Operating and maintenance manual and CE declaration of conformity

Kondisi: hampir baru (bekas), Tahun pembuatan: 2020, jam operasional: 12.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 5645, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 4.000 mm, jarak gerak sumbu Z: 1.600 mm, kecepatan pemakanan sumbu X: 25.000 m/menit, laju pemakanan gandar Y: 25.000 m/menit, laju pemakanan sumbu Z: 25.000 m/menit, panjang total: 6.550 mm, panjang meja: 2.500 mm, lebar meja: 2.500 mm, lebar total: 15.900 mm, kecepatan spindel (maks.): 4.000 rpm, tinggi total: 11.500 mm, berat keseluruhan: 57.000 kg, jangkauan kerja: 2.500 mm, daya motor spindle penggiling: 46.000 W, Dear Sir or Madam, Fedpottri Tjfx Aaqsgb We hereby offer our portal bed milling machine for sale. The machine was installed in winter 2019/2020 and has logged 12,000 operating hours. Price information is available upon request. The machine is currently still in operation. The stated price pertains exclusively to the machine itself. Disassembly, transport, and installation are the responsibility of the buyer. We look forward to receiving serious inquiries. Thank you in advance.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, x-travel 2500 mm y-travel 3500 mm Fgedpfx Aevwgtyjaqob z-travel 1500 mm Control HEIDENHAIN TNC 640 C-axis ±360° Milling head – swiveling ° Milling head rotatable ±360° Table size – longitudinal 2500 mm Table size – cross 3500 mm Table load 6 t/m² Coolant system IKZ 70 bar Feed rate 60 m/min Spindle speeds 24,000 rpm Tool holder HSK-A63 Milling spindle motor S6 (40%/2 min) 41 kW Spindle torque S6 (40%/2 min) 49 Nm Milling spindle motor S1 (100%/2 min) 34 kW Spindle torque S1 (100%/2 min) 39 kW Tool changer 60 positions Machine weight approx. 74 t Required space approx. 4 x 7.5 x 5.4 m This thermosymmetric, ergonomic, universal ZIMMERMANN FZU32 gantry milling machine is in like-new condition and immediately available. DESCRIPTION: The FZU32 is a remarkably compact 5-axis gantry milling machine for machining aluminium, composite materials, plastics, Ureol, and steel. The newly developed, centrally guided, exceptionally rigid gantry allows us to meet the increasing demands in model making, tool, and mould construction. This thermosymmetric design makes the FZU32 less susceptible to adverse environmental conditions.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, jarak pergerakan sumbu X: 5.500 mm, jarak lintasan sumbu Y: 2.900 mm, jarak gerak sumbu Z: 1.000 mm, panjang meja: 5.000 mm, lebar meja: 2.000 mm, cnc-portalfraesmaschine-seramill240t Fjdpjyfpkbjfx Aaqjgb

Kondisi: bekas, Tahun pembuatan: 1999, Technical details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control system: Heidenhain TNC 426 Spindle speed, left rotation: max. 10,000 rpm Spindle speed, right rotation: max. 10,000 rpm Distance between uprights: 2,500 mm Spindle-to-table distance (vertical): 1,230 mm Table clamping surface: 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate X/Y/Z: max. 20 m/min Compressed air: 8 bar Fsdpfx Asu Nc Emeaqegb Total power requirement: approx. 100 kW Machine weight: approx. 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-axis gantry milling machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, type fork design, integrated A-axis = swivel angle +/- 110° Tool changer: Manufacturer Hamül, type rotary table with indexing disc, for 32 tool holders Chip conveyor: 2 hinged belt conveyors, manufacturer DGS, with coolant tank, insertion length 8,500 mm Manufacturer BKW, type DL 55V-2KK, capacity 2.41 l/min; Combined oil/water cooling unit for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via control panel type Heidenhain LE 426 X, Y and Z axes equipped with Heidenhain linear scales Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with inspection windows and safety doors) Hydraulic system Work area lighting

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, jarak pergerakan sumbu X: 1.500 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 500 mm, panjang total: 5.179 mm, panjang meja: 1.800 mm, lebar meja: 650 mm, lebar total: 3.345 mm, gerak cepat sumbu X: 28.000 m/menit, pergeseran cepat sumbu Y: 28.000 m/menit, pergerakan cepat sumbu Z: 28.000 m/menit, beban meja: 1.500 kg, berat keseluruhan: 7.500 kg, tr_de_hu_001 Fodpfx Aasyhph Eeqegb

Kondisi: bekas, Tahun pembuatan: 1991, MK-20240628-001 Fgodpfx Aaoyqvdroqob