Beli Mesin amplas pita lebar, lebar kerja 1200–1299 mm bekas (7)

Kondisi: baik (bekas), de-DE Hjdpfx Aev A Ta Dsl Iol

Kondisi: bekas, Tahun pembuatan: 2000, Working width: .- mm Equipped with 1 sanding unit consisting of: - Combination unit with electronic pad for lacquer sanding - Lacquer sanding - Dust brush - Roller table at infeed, 270 mm - Electronic program control for 50 programs Machine overhauled with brand new feed belt Valves and pressure regulators replaced Machine fully adjusted, Hodpfx Alsvwfl Uo Iel Test sanding performed Used Manufacturer: Bütfering Model: Classic 111 C Year of manufacture: 2000 Machine no.: 63608 Working width: 1100 mm Passage height: 160 mm CE type tested GS wood dust certified Belt dimensions: 1120 mm x 1900 mm Feed speed: 4 + 8 m/min. 1 combination unit 3.7/7.5+15 kW, 3 belt speeds with automatic positioning via control Steel roller Diameter: 130 mm Belt speed: approx. 4.5 + 9 + 18 m/s Electronic segmented pad Segment spacing: 50 mm for lacquer sanding, workpiece controlled Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without guarantee or warranty.

Kondisi: baik (bekas), Tahun pembuatan: 1988, jam operasional: 1.437 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 32055, Mesin wide belt sander Hjdpsyv H Akofx Al Ijl - Pengamplasan veneer - Kayu solid - Amplas antar-lapisan cat dengan 2 belt amplas: - Belt 1 untuk amplas melintang - Belt 2 untuk amplas memanjang dengan balok penekan bersegmen Mesin dalam kondisi sangat terawat dan siap operasi.

Kondisi: sangat baik (bekas), jam operasional: 4 h, Fungsionalitas: berfungsi sepenuhnya, lebar total: 2.000 mm, tinggi total: 2.200 mm, panjang total: 1.900 mm, lebar kerja: 1.300 mm, lebar penggilingan: 1.300 mm, berat keseluruhan: 3.200 kg, jenis penyesuaian ketinggian: listrik, lebar meja: 1.300 mm, daya motor pengumpan: 35 W, tegangan masuk: 400 V, panjang transportasi: 2.100 mm, tinggi transportasi: 2.200 mm, lebar transportasi: 2.000 mm, A powerful wide-belt sanding machine, designed for processing wood-based panels, solid wood, plastics, and metal. It is suitable for both calibration (coarse sanding) and fine sanding, ensuring excellent surface quality as well as stable, reproducible results. The machine is equipped with two independently controlled sanding belt units, allowing the simultaneous use of two different grit sizes. Each sanding belt features separate variable speed control, effectively preventing scratches, overheating, and the clogging of the abrasive material. The conveyor table, combined with precise height adjustment, enables sanding of materials with a thickness of up to 100 mm. Material thickness is set via a control panel with a digital display, ensuring high accuracy and convenient operation. Each sanding drum is equipped with stepless speed regulation via frequency converter and sensors for belt tracking monitoring. These systems prevent the sanding belts from tracking off-center and automatically stop the machine in case of deviations, thereby protecting both the machine and the workpiece. The sanding machine features a central extraction system and can be connected to industrial dust extraction units or vacuum cleaners via Ø100 mm extraction ports. In addition, each sanding belt is fitted with a pneumatic belt cleaning system that continuously removes sanding dust during operation. Changing sanding belts is quick and straightforward – by releasing a single tensioning device, the belt can be removed. The machine is compatible with commercially available abrasive belts joined with tape. No special or proprietary abrasives are required. Hodpemrqlnsfx Al Isl MAIN FEATURES • Working width: 1300 mm • Two independently controlled sanding belt units • Simultaneous use of two different grit sizes possible • Infinitely variable speed control for each sanding belt (frequency converter) • Sanding capacity up to 100 mm material thickness • Conveyor table with height adjustment • Digital control panel • Pneumatic belt tensioning system • Pneumatic belt cleaning system • Extraction ports Ø100 mm • Fast and easy sanding belt changes • Semi-automatic operation Condition of the machine: The machine is in very good condition. It was only used for short-term demonstration purposes.

Kondisi: baru, - NEW - GENERAL FEATURES: Machine Frame and Work Table * Steel construction with electrical control cabinet at the front of the machine * In-feed of sanding belts from the left side of the machine * Motorized table height adjustment * Main motor integrated within the machine frame Electrical Equipment * Electromechanical control panel on the front left side of the machine * Automatic star-delta starter for main motor * Motor protection switches for all motors * Motors with IP54 insulation class Emergency and Safety Devices * Safety micro-switch for thickness overrun * Automatic brake for instant stop of the units * Emergency stop bar at workpiece infeed * Mushroom (palm) switches at the workpiece infeed and outfeed * Lockable main switch * Automatic emergency shut-off of the machine in the event of: - Sanding belt breakage - Un-tensioned sanding belt - Lateral deviation protection for the sanding belt - Insufficient air pressure Hjdpevwfrnofx Al Isl - Main motor overload Note: The standard version with 400 Volt 50 Hz requires a three-phase power supply + neutral + earth. If the 400 Volt power supply does not have a neutral, a single-phase transformer (see price list) must be ordered. The same transformer is required for machines with voltages higher than 400 Volt, regardless of the presence of a neutral. A version for 220 or 230 Volt (50 or 60 Hz) is available at extra cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Shore - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Shore - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for main motor to display power consumption - Electronic readout of working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Anti-kickback device at infeed before the first unit - Rubber feed belt, 60 Shore - Roller table with two rollers at the infeed and outfeed of the work table - Feed belt with two speeds 4.5 / 9 m/min with geared motor - Automatic belt centering Working width mm 1,100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor power kW (HP) 11 (15) Geared motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European safety directives (CE marking) 93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10" control panel with “eye-S” software integration 31.21.60 "RA" grooved steel contact roller – 1st unit 97.50.71 Main motor 15 kW (20 HP)

Kondisi: baru, Tahun pembuatan: 2025, Dimensions (L/W/H) 4630x3005x2334 mm Weight 12,160 kg Total power requirement 135.6 kW Sanding Line SANDOMAT SFR-R-P1300+SUR-R1300 - Working width: 1300 mm - Min. workpiece length: 465 mm - Min./max. pass-through height: 3-100 mm - Total power: 71.8 kW - Feed speed, stepless: 4-28 m/min - Motor power, first sanding unit: 30 kW - Motor power, second sanding unit: 22 kW - Motor power, third sanding unit: 15 kW - Feed motor: 3.7 kW - Height adjustment motor: 0.55 kW - Dust extraction brush motor: 0.55 kW - Hardness of first sanding roller: 80 Sh - Hardness of second sanding roller: 50 Sh - Third sanding roller: pad-type - Diameter of first sanding roller: Ø 255 mm - Diameter of second sanding roller: Ø 255 mm - Third sanding roller: pad-type - Sanding belt speed, first belt: 21 m/s - Sanding belt speed, second belt: 14.5 m/s - Sanding belt speed, third belt: 11 m/s - Sanding belt dimensions: 1320 × 2000 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9,200 m³/h - Voltage: 400 V / 50 Hz Hsdpfx Asv A Hftol Iol - Dimensions L=2100, W=3005, H=2334 mm - Weight: 6,390 kg SANDOMAT SUR-R1300 Technical data: - Working width: 1300 mm - Min. workpiece length: 390 mm - Min./max. pass-through height: 10-100 mm - Total power: 63.8 kW - Feed speed, stepless: 5-32 m/min - Motor power, first sanding unit: 37 kW - Motor power, second sanding unit: 22 kW - Feed motor: 3.7 kW - Height adjustment motor: 0.55 kW - Dust extraction brush motor: 0.55 kW - Hardness of first sanding roller: 80 Sh - Hardness of second sanding roller: 70 Sh - Diameter of first sanding roller: Ø 255 mm - Diameter of second sanding roller: Ø 255 mm - Sanding belt speed, first belt: 21 m/s - Sanding belt speed, second belt: 18 m/s - Sanding belt dimensions: 1320 × 2400 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9,500 m³/h - Voltage: 400 V / 50 Hz - Dimensions L=2530, W=2170, H=2290 mm - Weight: 5,770 kg

Kondisi: bekas, Tahun pembuatan: 1996, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: Penandaan CE, Sander with a working width of 1300 mm. In good condition. Hjdpfx Ajwptrrol Iol