Kondisi: sangat baik (bekas), de-hu-1 Hsdjyt Izbepfx Ad Rek

Kondisi: bekas, Tahun pembuatan: 2012, tinggi total: 1.600 mm, panjang total: 5.250 mm, lebar total: 1.440 mm, de-hu-001 Hsdpfx Adswnhb Sj Rok

Kondisi: bekas, Tahun pembuatan: 2013, Used machine Year of manufacture: 2013 Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed 0.25 kW; approx. 1250 mm long; approx. 6.0m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber coating. Digital counter for height adjustment - Direct adhesive application to the workpiece: Leak-proof glue pot with glue supply from below and fast heating-up time after machine standstill - Flush cutting unit for front and rear workpiece edges, automatic tracing on the workpiece, pneumatic cutting with knife for cuttable edges - Flush milling unit with vertical tracing and horizontal guidance, reproducible settings via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°; central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film table Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Heating power glue pot: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Heating time: approx. 10 minutes Hodpfxeytkiue Ad Rok - Pneumatic connection: 6 Bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm (without film table Ø 800 mm) - Net weight: approx. 260 kg Availability: short notice Location: Flörsheim

Kondisi: sangat baik (bekas), Mesin pelapis pinggir Akzent V31 - Dimensi: 1750 x 530 x 600 mm - Tambahan: meja roller Ø 600 mm - Motor frais dengan pisau cakram Hsdpfx Adsytw Tte Rjk - Ketebalan benda kerja: 10-55 mm - Ketebalan tepi: 0,4-1 mm - 220 Volt - 3,3 kW - Berat: 135 kg

Kondisi: belum diuji (bekas), Tahun pembuatan: 2004, Fungsionalitas: belum diuji, tinggi benda kerja (maks.): 60 mm, lebar benda kerja (maks.): 2.800 mm, ketebalan tepi (maks.): 20 mm, model controller: IMATRONIC MT, The machine has the following configuration: Unit 1: Router with CNC positioning Unit 2: Router with NC positioning, hot-melt adhesive tank, pre-press for hot-melt adhesive Edge Bonding + Edge Processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling unit (1 motor) with automatic cycle Unit 5: Milling unit (1 motor) with automatic cycle Unit 6: Belt sanding unit (1 motor) Unit 7: Belt sanding unit (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height, min.: 8 mm Panel height, max.: 60 mm Panel width, min.: 280 mm Panel width, max.: 2,800 mm Edge thickness, min.: 0.4 mm Edge thickness, max.: 20 mm Distance between chain feed lugs: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking Hjdpfx Adjyttrxe Rok The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 6561

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, Fungsionalitas: belum diuji, ketebalan tepi (maks.): 3 mm, kecepatan pemakanan sumbu X: 25 m/menit, kecepatan rotasi (maks.): 12.000 rpm, TECHNICAL DETAILS Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed speed: 25 m/min MACHINE DETAILS Edge Processing Aggregate 1 Aggregate: Pre-milling Unit Model: WK13 No. of motors: 2 Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 2 Aggregate: Top Trimming Unit No. of motors: 2 Motor power: 0.55 kW Max. speed: 12,000 rpm Edge Processing Aggregate 3 Aggregate: Multifunction Model: FK13 No. of motors: 2 automatic tool change with NC positioning Motor power: 0.4 kW Max. speed: 12,000 rpm Edge Processing Aggregate 4 Aggregate: Top Trimming Unit Model: UF11 No. of motors: 1 Motor power: 4 kW Max. speed: 9,000 rpm Edge Processing Aggregate 5 Aggregate: Edge Scraper Model: MN21 with NC positioning Edge Processing Aggregate 6 Hjdpfx Aeytr Hbjd Rsk Aggregate: Glue Scraper Model: FA11 Edge Processing Aggregate 7 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Edge Processing Aggregate 8 Aggregate: Brush No. of motors: 2 Motor power: 0.25 kW Installed total power: 35 kW EQUIPMENT Spraying unit PowerControl PC22 machine programming software CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved"), based on photo documentation and descriptive technical/commercial documentation. The buyer has the right to inspect the goods prior to collection and is responsible for installation, securing, and operation of the machine at the destination. External Reference: 6216

Kondisi: belum diuji (bekas), Tahun pembuatan: 2014, Fungsionalitas: belum diuji, daya: 25 kW (33,99 hp), tinggi benda kerja (maks.): 60 mm, ketebalan tepi (maks.): 12 mm, kecepatan pemakanan sumbu X: 18 m/menit, Perlengkapan: Penandaan CE, TECHNICAL DETAILS Panel Height min.: 8 mm Panel Height max.: 60 mm Edge Thickness min.: 0.3 mm Edge Thickness max.: 12 mm Max. Feed Speed: 18 m/min Sequence of Processing Steps: Section 1 Operation: Positioning Motor Power: 2.5 kW Automatic Control Hodpfeytr Rgox Ad Rjk Edge Preheater Glue Tank Pre-glue Heater Roll Magazine Section 2 Operation: Trimming Number of Motors: 2 Section 3 Operation: Edge Milling Number of Motors: 2 Motor Power: 0.55 kW NC Positioning Section 4 Operation: Corner Rounding Number of Motors: 2 NC Positioning Section 5 Operation: Milling Number of Motors: 1 Motor Power: 3.5 kW Section 6 Operation: Edge Scraping Section 7 Operation: Glue Scraping Section 8 Operation: Brushing Number of Motors: 2 MACHINE DETAILS Total Power: 25 kW EQUIPMENT Panel Support Guide Spraying Unit Control with more than 20 control systems CE Marking The machine is sold and delivered in its actual technical and legal condition (“as seen and inspected”), based on photo documentation and technical/commercial documentation of descriptive character. The buyer has the right to inspect the goods before collection, and assumes responsibility for installation, securing, and use of the machine at the destination. External Reference: 6216

Kondisi: baik (bekas), Kode: 0367 Merek: SCM Model: BASIC 1 Mesin edge bander otomatis untuk tepi kayu, PVC, melamin, ABS Data teknis: Tinggi kerja: 8 - 40 mm Ketebalan material pelapis: 0,4 - 3 mm Kecepatan umpan: 8 m/menit Panjang panel minimum: 140 mm Lebar panel minimum: 60 mm Unit pemotong akhir: Kecepatan rotasi 10.000 rpm – Daya motor 0,6 kW Unit pemotong tepi akhir: Kecepatan rotasi 27.000 rpm – Daya motor 0,5 kW – Kemiringan pisau 12° Hjdpfeytfnfjx Ad Rok Tekanan kerja: 6 bar Dimensi keseluruhan: 1700 x 700 x 1250 mm Berat: 470 kg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, Edge banding machine from 2006. The HOMAG Optimat KAL 330 features a flexible production layout for furniture components, allowing workpiece dimensions from 250 to 3000 mm in length and 120 to 1200 mm in width. It is equipped with a single-sided edge bander capable of processing various edging materials up to 20 mm thick. If you are looking for high-quality edge processing capabilities, consider the HOMAG Optimat KAL 330 edge banding machine, which we have for sale. Contact us for more details. • Line workpiece capacity: • Length: 250-3000 mm • Width: 120-1200 mm • Thickness: 8-60 mm • Edge banding machine (KAL 330) – Base and transport • Continuous machine frame; workpiece support with extendable roller rail ~800 mm • 80 mm wide transport chain with rubber coating; precision guidance, hardened surfaces • Top pressure: driven belt • Technical data: • Feed speed 18-25 m/min • Working height 950 mm • Minimum working width: 55 mm at 22 mm thickness; 100 mm at 60 mm thickness (depends on workpiece length) • Workpiece protrusion/overhang 30 mm • Workpiece thickness 12-60 mm • Edging material from strip: 0.4-20 mm (max. cross-section 900 mm²) • Edging material from coil: 0.3-3 mm (max. cross-section: PVC 135 mm², veneer 100 mm²) • Max. coil diameter 830 mm • Pneumatic connection 7-8 bar • Infeed system and control (integrated with KAL 330) • Flexible workpiece infeed system wz10 for automatic feeding (longitudinal and transverse); suitable for dimensionally accurate, square parts • Stepless adjustment of the infeed guide (axis), adjustable speed at entry terminal • Automatic aggregate lateral adjustment (workpiece overhang 30-80 mm) for gluing and post-processing • Entry terminal; solvent applicator top/bottom • Edging preparation and gluing • Pre-milling unit: 2 motors, 4 kW each, 150 Hz, 9000 rpm; electro-pneumatic control • Stepless vertical axis SF20 for automatic centering to panel thickness • Premelting unit with granulate reservoir • Quick-change system for QA/QE application unit; QA front glue reservoir for color changes • Base glue unit A20; magazine height adjustment ±5 mm (manual spindle) • Extended magazine A6/A-E12/A20 for 2 coils (max Ø 830 mm); preheating station for QA/QE • Automatic pressure zone adjustment • Trimming and milling • HL84 milling unit with stationary milling fence for sensitive edges • Pneumatic milling motor adjustment (2 positions: flush/even and with overhang for contour milling) • Pneumatic chamfer/straight changeover; manual side milling fence adjustment when changing edge thickness • Rough trimming unit: 2 motors on top of each other, 1.5 kW each, 200 Hz, 12,000 rpm; height adjustment via top pressure • Pneumatic 2-position adjustment: rough trimming with ~0.2 mm overhang / without overhang • Reserved space for a fine trimming unit • Servo contour trimming unit FK13 automatic: • 2 motors, each 0.4 kW, 200 Hz, 12,000 rpm • Servo-controlled movements; automatic 8-position tool changer • Feed speed max. 20 m/min; minimum distance between workpieces 500 mm • Workpiece thickness 12-60 mm • Automatic FK adjustment for consistent radii with varying edge thicknesses; automatic retraction Hodpfjytf Irox Ad Rek • FK workpiece guidance with additional clamping for min. 120 mm workpiece length (one-sided) • Post-processing and cleaning • Multi-cleaning unit MN21 automatic:

Kondisi: baik (bekas), Tahun pembuatan: 1998, Kantenstärke_von_bis_0.4-5_mm Hsdsx Tu Rdjpfx Ad Rsk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, Perlengkapan Tambahan Unit aplikasi dengan lapisan Teflon untuk 1,5 kg granulat EVA Hodpfjx D Hbtjx Ad Rjk Unit pemoles atas dan bawah FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander ini diproduksi pada tahun 2024. Mesin ini dilengkapi dengan majalah berputar berdiameter 750 mm untuk material edging dengan rentang 0,4-3 mm, unit aplikasi GlueBox, serta unit pemoles atas dan bawah. Mesin ini memiliki kontrol x-motion Plus canggih dengan layar sentuh 15'' SmartTouch dan unit milling multifungsi untuk pemrosesan tepi plastik yang presisi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Perekat Tepi

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 10 A, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, berat keseluruhan: 280 kg, tekanan kerja: 6 batang, sambungan udara terkompresi: 6 batang, sambungan pneumatik: 6 batang, tekanan: 6 batang, We offer this used BI-MATIC Prima Plus 7.3-r.a. Edge Banding Machine Partnership Edition, year of manufacture 2021. Units: Jointing unit including AIGNER diamond jointing cutter heads with DIA replaceable knife system Konstantin, and controlled edge air nozzle behind the second jointing cutter head. End trimming saw unit with extraction device, including pneumatically tiltable saw blades, adjustable and programmable from the control panel. Radius milling unit. Corner rounding unit (copy milling unit) with insert bottom function and 2-position turret. The entire unit can be pneumatically engaged and disengaged. Radius scraper unit, engageable and disengageable, including extraction device with chip collection box for scraper chips. Flat scraper unit with 4-times usable scraper knife. The entire unit can be engaged/disengaged. Removed glue residues are extracted. Buffing unit with 2 fabric buffing wheels arranged at an angle. Features: - High gloss package: roller scanning for radius milling unit, radius scraper unit and flat scraper unit - Large visibility, noise, and safety enclosure for all units and the glue pot - Interior lighting - Control panel with 12'' touchscreen and intuitive operator guidance - USB port for data backup and transfer Hsdpfxeya I Ubo Ad Rjk - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving standby mode - Glue roller with feed screw for long and high workpieces (especially for PUR adhesive) - Pressure zone with motor-driven first pressure roller - Heavy-duty guillotine shears for edges 54 x 3 mm - Infeed fence adjustable by handwheel (jointing thickness setting) with digital display - Upper pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for corner rounding unit - Manual 2-position turret for radius scraper unit Technical Data: Edge thickness: 0.4 - 3 mm Min. panel width (without corner rounding unit): 80 mm Min. panel width (with corner rounding unit): 130 mm Min. panel length (without corner rounding unit): 100 mm Min. panel length (with corner rounding unit): 300 mm Min. panel thickness: 10 mm Max. panel thickness: 50 mm Feed speed: 9 m/min Extraction port: 2 x 150 mm Connection: 9 kW - 400 V Compressed air: 6 bar Order no.: BIMA0650 If you have any questions or require further information, please do not hesitate to send us a message or give us a call.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 55 mm, ketebalan tepi (maks.): 12 mm, jenis penyesuaian ketinggian: pneumatik, penyesuaian kemiringan mata gergaji: 10 °, Kami menawarkan mesin pelapis tepi HOLZ-HER SPRINT 1310 dalam kondisi sangat baik, tahun produksi 2005, termasuk Ott Rondomat. Produsen: HOLZ-HER Model: SPRINT 1310 Tahun produksi: 2005 Dijual mesin pelapis tepi Holz-Her Sprint 1310, terawat servis Berfungsi penuh! Konstruksi berat – ketebalan pelapis tepi 0,4 – 12 mm Kontrol layar SPS Majalah tepi otomatis penuh untuk bahan gulungan dan strip Hodpfoycgabjx Ad Rsk Stasiun aplikasi lem untuk cartridge + pelapisan PU Nozel sentuh otomatis Tinggi benda kerja 6–55 mm Unit pemotong ujung Dapat diatur dari 0–10° kemiringan gergaji potong Unit frais, frais rata 12 mm, frais radius Unit pengikis untuk chamfer dan radius dengan 2 holder pengikis pneumatik Unit pengikis permukaan – finishing Termasuk Ott Rondomat untuk pemrosesan tepi

Kondisi: sangat baik (bekas), Mesin edging Hebrock 3003 Dilengkapi dengan baik, dapat diuji sebelum pembelian Mata frais pra-pemotong Fuga nol dengan sistem tanpa lem AirTronic - udara panas Aplikasi lem dengan rol, Tangki dapat diganti Gunting pra-potong pneumatik Rol penekan Cairan anti-adhesif Gergaji potong akhir Agregat frais atas-bawah, R1 – R2 dapat disetel secara pneumatik Agregat pembulatan sudut dapat diatur secara pneumatik Hedpfx Adjyvq Dfj Rsk Pneumatik sikling rata Maks tinggi elemen 50 mm Maks tebal edging rol 3 mm Kecepatan maju 10 m/menit Kondisi sangat baik, berfungsi penuh Bisa dibeli melalui leasing

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2010, HOMAG KAL 310/7/A3 ini diproduksi pada tahun 2010. Mesin pelapis tepi satu sisi bekas dengan majalah tepi ISAS 28 posisi, unit perekat PU, dan sistem pengembalian Boomerang. Dilengkapi juga dengan unit milling join dengan dua motor serta sistem pelengketan PU 34 dengan kapasitas hingga 6 kg/jam. Ideal untuk aplikasi pelapisan tepi yang presisi. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Hsdpjx D Ra Tsfx Ad Rsk Jenis Aplikasi Pelapis Tepi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, Mesin edgebander Felder FORMAT 4 Tempora60.06LX ini diproduksi pada tahun 2019. Dilengkapi dengan sistem kontrol x-motion PLUS, umpan rantai dengan kecepatan 10 m/menit, dan unit lem berlapis Teflon untuk granul EVA atau PUR. Mesin ini mendukung ketebalan tepi antara 0,4 hingga 3 mm dan dilengkapi dengan unit frais multifungsi. Pertimbangkan kesempatan untuk membeli edgebander Felder FORMAT 4 Tempora60.06LX ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Hodpfxjx D D R So Ad Rsk Jenis Aplikasi Pelapisan Tepi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2025, Edgebander VITAP GIOTTO yang diproduksi tahun 2025 ini dirancang untuk pembanduan tepi pada panel lurus, berbentuk, cekung, dan cembung. Mesin ini dilengkapi dengan mesin pembanduan kontur semi-otomatis dengan pot lem berlapis teflon, pengaturan aplikasi lem yang bisa diatur, serta perangkat pemotong gulungan otomatis. Sangat ideal untuk menangani benda kerja besar berkat lengan penguat yang dapat berputar dan sistem vakum terintegrasi. Pertimbangkan kesempatan untuk membeli VITAP GIOTTO edgebander ini. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Hjdpsx E Ecbjfx Ad Rjk Jenis Aplikasi Pembanduan Tepi

Kondisi: bekas, Tahun pembuatan: 2007, Mesin Edgebander Otomatis Bekas untuk dijual! Produsen: SCM Model: K1000 Tahun pembuatan: 2007 Status: sudah dibongkar dan siap diangkut segera! Hsdpfxeya Tv Re Ad Rjk Lokasi: Lituania Perlengkapan dan spesifikasi teknis: Ketebalan edgeband maksimal 8 mm Ketebalan panel maksimal 50 mm Ketebalan edgeband gulungan maksimal 3 mm Panjang benda kerja minimal 65 mm Kecepatan makan maksimal 18 m/menit

Kondisi: baik (bekas), Tahun pembuatan: 2005, Gluing unit motorized height adjustment Homatic NC 21 control system frequency converter Hedpfx Adsyvy D Is Rok Hot-melt gluing unit A20 for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat screen Feed rate 18.5 m/min ? Feed speed steplessly adjustable 8-24 m/min or 12-24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece overhang 30 mm Workpiece thickness 12-60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Joint milling unit Workpiece pre-heating Gluing section A 20 / hot-melt gluing unit A 34 Magazine for solid wood edges, strip material and roll material Roll separation device Pressure zone End trimming unit KL Release agent spray device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, exchangeable (for color change) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Multi-purpose finishing unit (automatic) complete Finishing unit The pictured return conveyor is not included in the scope of delivery The data were taken from a data sheet, therefore no guarantee. Exact configuration on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, nomor mesin/kendaraan: 0-200-24-6287, Fungsionalitas: berfungsi sepenuhnya, tegangan masuk: 400 V, arus masuk: 56 A, ketebalan tepi (maks.): 20 mm, Perlengkapan: Penandaan CE, Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edging, and finishing of various edge materials. Fixed fence on the left side. NOTE: Very well-maintained machine with low operating hours SPECIFICATION / EQUIPMENT: Base machine with 80 mm wide transport chain as workpiece feed device, - Maximum workpiece thickness: 60 mm - Motorized height-adjustable top pressure - Workpiece support with rollers, extendable up to approx. 700 mm - Glue pot lift-off during feed stop - Glue roller clamping before workpiece trailing edge - (Remote) manual operation for easy machine setup - Adjustable infeed fence via NC axis - Joint trimming unit, synchronous/counter-rotation, 2 x 4kW, process-controlled GLUING UNIT A20, consisting of: - QA34 glue application unit Hjdpfxeyv Da Ho Ad Rek - Pre-melter for EVA adhesive - Edge magazine for edge thickness min. 0.4 mm up to max. 20 mm - Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven, 6 idler pressure rollers POST-PROCESSING SECTION: - HL81 end trimming unit, 2 motors (front/rear edge) with motorized fine-adjustable end stops - Pre-/flush trimming unit, 1.5 kW, top/bottom - FK13 profile trimming unit (corner rounding), 2 motors (top/bottom) with automatic 8-position tool changer, multiple replacement heads, iSystem - MN21 profile scraper, top/bottom, with axis positioning - FA10 flat scraper, top/bottom (version with 3 tracing rollers) - KS10 belt sanding unit for straight edges with oscillation - Buffing unit, top/bottom CONTROL: HOMATIC NC 21

Kondisi: sangat baik (bekas), NOMOR KATALOG 7729 DATA TEKNIS Perlengkapan: - Piringan untuk pita - Tangki lem (granulat) - Pengumpan pita - Pemotong guillotine – pemotongan awal tepi - Rol penekan 2 buah - Lebar minimum benda kerja: 50 mm - Ketebalan benda kerja: 10–40 mm - Jari-jari dalam minimum: 50 mm - Pelapisan tepi sudut dengan tepi 1 mm, 0–45° - Ketebalan tepi: 0,3–3 mm - Feeding elektrik - Daya total: 2 kW - Tekanan udara terkompresi: 6–7 bar - Ukuran (P/L/T): 1700x1300x1550 mm - Berat: 310 kg KEUNGGULAN – Produksi Polandia – Tidak dicat ulang – Dokumentasi DTR Hedpoya Hnaefx Ad Rsk – Kondisi sangat baik – mesin edging bekas Harga netto: 6.500 PLN Harga netto: 1.550 EUR (dengan kurs 4,2 EUR) (Harga dapat berubah sesuai fluktuasi nilai tukar)

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, Edge banding machine from 2005. This OTT Twister features a hot/cold-melt glue application system and can process edge thicknesses from 0.3 to 10 mm. It supports workpiece thicknesses from 8 to 60 mm and has a feed speed of 14–20 m/min. If you're looking for a high-quality edge banding machine, you should consider the OTT Twister edge bander we are offering for sale. Contact us for further details. Hsdpfxoyn I U Re Ad Rok • Glue application: Hot-/cold-melt process; application roller with synchronous and counter rotation • Edge thickness: 0.3–10 mm • Workpiece thickness: 8–60 mm • Workpiece width: min. 70 mm • Workpiece length: min. 150 mm • Operating pressure: 6 bar • Feed motor rating: 3.0 kW • Feed speed: 14–20 m/min • Electrical connection: 3x 400 V, 50 Hz • Extraction requirement: 1x Ø180 mm at 20 m/s = 35 m³/min • Air speed (minimum): 20 m/s • Compressed air consumption: approx. 300 l/min Processing units / Equipment installed on the machine: • Jointing: - 2 x 2.2 kW, n=14,600, 250 Hz; two application-controlled working spindles • Combination melt adhesive unit: - Mounted, interchangeable glue tank for EVA, PUR hot-melt adhesive, or cleaning granulate; tank capacity 2.5 l • AKM (Automatic Edge Magazine): - Automatic edge magazine with optical monitoring for pre-cut banding strips • End trimming: - 2 x 0.8 kW, n=12,000, 200 Hz; automatic pivoting 0°/5°; 2 carbide-tipped saw blades Ø140 x 3.2 x 16, z=34 • Flush trimming: - 2 x 0.7 kW, n=12,000, 200 Hz; single-sided tracing; 2 carbide-tipped reversible cutters HF70, Ø70 x 20 x 16, z=4 • Fine trimming (bevel 15°/30°/45°): - 2 x 0.3 kW, n=12,000, 200 Hz; double-sided tracing; 2 carbide-tipped reversible knife heads HF70, Ø70 x 20 x 16, z=4 • AWSR (Radius R2–R5): - 2 quick-change sets for fine milling, 2 x 0.3 kW; 2 carbide-tipped reversible cutterheads AR73 x 16 x 16, z=3, R2–R5 • AKF (Copy Milling): - Automatic copy milling with two separate working spindles for end faces and longitudinal radii; 2 x 0.37 kW, 12,000 rpm; tools R1–R3 • Scraper blade: - 2 x carbide scrapers, automatic feed • Surface scraper: - 2 x carbide scrapers with fine adjustment device • PU set: - 5-way spray system (2 x release agent, 1 x lubricant, 2 x cleaner), fine buffing unit with cloth disc • Edge cleaning: - 2 x 0.2 kW, n=2,800, 50 Hz, oscillating brushes

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, tinggi total: 1.445 mm, panjang produk (maks.): 2.740 mm, en Hodpfx Adex D Icfs Rek

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2013, en-001 Hjdpjx D Nh Aefx Ad Rek

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, lebar benda kerja (maks.): 40 mm, tinggi total: 950 mm, panjang produk (maks.): 3.672 mm, This BRANDT edge banding machine, model Ambition 1110 KDF 110, was manufactured in 2016. It is a single-sided edge bander designed for processing straight panel edges. With an overall length of 3,672 mm and a feed speed of 8 m/min, it is suitable for workpiece thicknesses ranging from 8 to 40 mm. Check the availability of this BRANDT edge bander Ambition 1110 KDF 110 for purchase. Contact us for further details. • Machine type: Single-sided edge bander for straight panel edges • Feed speed: 8 m/min • Working height: 950 mm • Workpiece and edge material parameters • Workpiece thickness: 8–40 mm • Workpiece width: min. 70 mm (thickness 8–22 mm) or 120 mm (thickness 23–40 mm) Hjdpfx Aoyir S Nsd Rjk • Edging material (coils): 0.4–3 mm • Edging material (strips): 0.4–3 mm • Max. edge height: workpiece height + 5 mm • Processing units (aggregates) • Jointing unit: 2 x 0.75 kW, 200 Hz motors (one clockwise, one counter-clockwise) with diamond cutters • Gluing unit (A3): Quick-change application unit; electronic thermostat for temperature monitoring • End trimming unit: 2 x 0.18 kW, 200 Hz motors for front/rear edge trimming • Flush/radius trimming unit: 2 x 0.27 kW motors, manually adjustable for flush, radius, or chamfer trimming • Profile scraper: For rounding or chamfering prefabricated PVC edges (max. 3 mm) • Glue joint scraper: Removes residual glue in the glue joint area • Control and electrics • Control system: EASY CONTROL EC 10+ with 7” widescreen touchscreen • Program memory: Up to 20 processing programs • Supply voltage: 400 V / 3 Ph / 50 Hz • Full load current: 15.0 A • Pneumatics: Min. 6 bar • Operation and maintenance • Adjustments: Manual adjustment of units (pressure beam, trimming, pressure zone) with digital mechanical counters • Lubrication: Manual central lubrication for transport chain (standard) • Safety: CE compliant; dust tested (TRK max. 2 mg/m³) Technical Specification Feed speed 8 m/min