Beli pengujian material bekas (477)

Kondisi: sangat baik (bekas), CTS CW-60/11 – Climate Test Chamber, Water-Cooled The CW-60/6 by CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for simultaneous temperature and humidity testing of multiple test specimens. Device Description This climate test chamber allows the functionality or material properties of a test item to be assessed under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures optimal heat and moisture transfer to the test object. The air handling unit is located at the rear of the chamber, while the refrigeration units are mounted in a separate frame behind the system for easy access. The control system is housed in its own separate control cabinet, with the user interface integrated into the control cabinet door. For chamber dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test area can be purged with fresh air using a blower system. Technical Specifications: Temperature Testing: - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm distance from the wall - Rate of temperature change (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C; Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: - Temperature range: +10 °C to +95 °C - Humidity range: 10% to 95% RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - All data given without thermal radiation and at steady-state conditions - Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimen, without radiation, and without additional equipment. Dimensions: Internal dimensions (test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Approx. internal: Width: 2,100 mm; Depth: 2,530 mm; Height: 2,200 mm (slightly variable depending on configuration) External dimensions: Width: 2,700 mm; Depth: 5,200 mm; Height: 2,520 mm (can vary depending on doors, frame, accessories, etc.) Operating Data: - Nominal power: 84.4 kW - Nominal voltage: 400 V 3/N 50 Hz - Nominal current: 131.4 A Technical Features: Refrigeration unit: - Water-cooled, low-noise, semi-hermetic, infinitely variable performance adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight carrier possible – costs and arrangements upon request Kedpfx Ahjx Anipehjlt - Scope of delivery: (see image) - (Specifications and data subject to modification and errors) - For further questions, feel free to contact us by phone.

Kondisi: sangat baik (bekas), RS Simulators Model: KKM 110/45 Manufacturer: RS-Simulatoren, water-cooled Climatic chamber 110m³ including condenser The KKM 110/45 belongs to the TKM/KKM modular system from RS-Simulatoren—meaning this is a modular climate chamber that is assembled on site. This design offers: Modularity: Individual segments are pre-assembled and then set up at the customer’s location. This allows for straightforward retrofits (increased depth or additional modules) or easy relocation at a later stage. Technical data climatic chamber: Manufacturer: RS-Simulatoren Prüf- und Messtechnik GmbH Model: KKM 110/45 External dimensions: 6200 x 9400 x 3400 mm (W x D x H, including technical appendages) Internal dimensions: 5900 x 7000 x 2960 mm (W x D x H) Chamber door (double-leaf): 3600 x 2930 mm (W x H) Personnel door (single-leaf) on side wall: 1880 x 900 mm (H x W) Feedthroughs: 8 x Ø120mm (4 left & 4 right) Windows: 1x (460 x 550 mm) in the front chamber door, heated 1x (1260 x 1000 mm) in the left side wall, heated Temperature range: -40°C to +120°C Temporal deviation: ± 0.8K – 1.5K according to DIN 50011 with an empty test chamber Humidity range: 10% to 95% Humidity tolerance: +/- 5.0% Refrigerant: 2x R404A 52 kg / 2x R23 17 kg Kodpowwg Uvsfx Ahhslt Temperature change rate: Heating: 1.0 K/min Cooling: 1.0 K/min Electrical data: Voltage: 3x400V/N/PE Current: 340A Weight: approx. 2,000 kg Important information for your security as a buyer! The following actions are performed on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See photo) (Data subject to change and errors reserved!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), We are offering a walk-in climatic chamber for sale. Manufacturer: RS-Simulatoren, water-cooled The chamber can be disassembled into 3 parts for transport (bolted joints) Temperature range: -30°C to +100°C Refrigerants: 20kg R-404A + 20kg R-452A External dimensions: approx. Width 3920 mm x Depth 7350 mm x Height 2600 mm Test chamber dimensions: approx. Width 3500 mm x Depth 5400 mm x Height 2110 mm Electrical data: 68kW nominal power Voltage: 3x400V/PE, Current: 135A Type: KKM 40 / 45 S Further technical details to follow! Klodpfx Ahjqw U Aashjt Important information for buyers: The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Specifications may be subject to change and errors reserved!) We are happy to answer any further questions by phone.

Kondisi: sangat baik (bekas), Vötsch Vötsch Industrial Tempering Oven VTL 200/250/225 250°C 11.25 m³ 58 kW – Heating Cabinet The oven will be available at a later date. Description: For sale is an industrial tempering oven / heating cabinet from Vötsch Industrietechnik GmbH. This unit is ideal for industrial tempering, drying, and heat treatment processes. The large usable chamber allows for the simultaneous processing of large or multiple components. The oven is controlled via a JUMO IMAGO 500 controller, providing precise temperature control as well as automated programs. Typical applications: Industrial production Plastics and metal processing Component drying Heat treatment Testing / material analysis Laboratory and experimental uses This system is of robust industrial quality and suitable for continuous operation. Technical Data: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 200/250/225 Maximum temperature: 250 °C Temperature safety class: TB Class 1 TWB Class 2 Interior: Usable volume: 11.25 m³ Klsdpjytrzfefx Ahhjt Internal dimensions: Width: 2000 mm Height: 2500 mm Depth: 2250 mm External dimensions: Width: 2900 mm Height: 3530 mm Depth: 2700 mm Load: Chamber load capacity: 400 kg Floor surface load: 1000 kg Weight Net weight: 1850 kg Electrical Data: Connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated current: 90 A Rated power: 54 kW Connected load: 58 kW Additional Data: Minimum exhaust air flow: 600 m³/h Reduced exhaust air flow: 150 m³/h Purge time: 465 s Total steam chamber: 14.9 m³ Sound pressure level: < 70 dB(A) Temperature limiter shut-off temperature: 280 °C Adjustable temperature limiter: 270 °C Weight: 1850 kg Condition: used Scope of delivery: (See picture) (Subject to modifications and errors in the technical data. All information is subject to change!) For further questions, please do not hesitate to contact us by telephone.

Tahun pembuatan: 2001, Kondisi: bekas, en Kodoyr R Uhjpfx Ahhslt

Tahun pembuatan: 2011, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Universal testing machine Inspekt Table Blue 5kN Mechanical construction: - 2 backlash-free ball screw spindles, driven by DC servo motor, Fmax = 10 kN, stiffness 10 kN/mm - 1 test area up to nominal load: - Test area width: 420 mm - Maximum test stroke without test tools, adapters, and KMZ: 1025 mm Travel speeds: - Test speed: 0.0015 - 1000 mm/min at full load - Return speed: 1000 mm/min Force measurement: - Measurement range: within 0.8 - 100% of nominal load, Class 1 (optional Class 0.5) (+/- 1% of the displayed value according to DIN EN ISO 7500-1) - Force measurement resolution: +/-180,000 digits at 20 ms integration time The machine is supplied with a factory test certificate. If a factory or DKD calibration is required at the installation site upon customer request, this service will be charged separately. Crosshead travel measurement: - Incremental square wave input with encoder monitoring, storage of crosshead position - Travel measurement resolution: 1 µm Dimensions (WxDxH) / Weights: - Load frame: 685 mm x 550 mm x 1420 mm / 100 kg - Controller mounted on load frame Standard features: - Force, displacement, and strain control - Overload protection, automatic force calibration - Specimen break detector, return function - Set-up operation via control panel with display (force, travel) Data processing: - USB 2.0 interface or LAN - Data transfer rate to PC: 50 Hz (standard), optionally higher data acquisition frequency via special software module - Internal data processing rate: 2 ms - Optional: up to 2 free slots for expansion cards (1-channel analog cards or 2-channel digital cards) available for additional sensors 115/230 VAC, 0.5 kVA, 50/60 Hz, 5-40°C, 20-80% relative humidity Options required for operation: Load cell, specimen grips, PC (current standard, OS 8-10-11, testing software) Load cell 5000 N - Measurement range: 5-5000 N tension and compression, with nominal 2mV/V output signal - Overload protection: +/-100%, linearity: +/-0.05%, hysteresis: +/-0.03%, repeatability: +/-0.02%, - including 1.5 m connection cable and calibration certificate Kjdpfx Aheyyu I Nohslt With extensometer MFX 200 The MFX 200-B extensometer, with its robust design and high measurement accuracy, is suitable for nearly all specimens from an initial gauge length of 10 mm. All elongations can be recorded from the modulus of elasticity up to specimen break. Use in both the lower and upper test area is unrestricted. In combination with the MFQ-A, r- and n-value determination is also possible for thin sheet metals. Two different measurement systems are available which differ in the measurement signal and other technical data (see technical documentation).

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Fire Suppression System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the extended safety and performance test package “P Plus”. This unit is not an ordinary laboratory incubator but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage devices. Key Added Value: The device is designed to safely detect, monitor, and control critical battery events up to EUCAR Hazard Level 5 (fire/flames, no explosion). What exactly can the unit do? (Section 2 – Performance & Application) - Conduct aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under temperature) - Long-duration and temperature cycling tests - Tests on unpowered and cyclically powered cells - Reproducible, precise temperature control throughout the entire chamber - Safe execution of tests under realistic thermal conditions Klodpfx Ahox Sc Inshet - Test environment for R&D, automotive, E-mobility, and energy storage technology Suitable for: - Battery & cell manufacturers - Research and development laboratories - Test laboratories & safety assessments - Automotive / E-Mobility / Energy storage sectors The P Plus Package turns the KB 720 into a genuine battery safety test chamber: Integrated Safety Features: - Automatic & manual CO₂ fire suppression system - Smoke detector with optical & acoustic alarm - Mechanical double-door locking mechanism (safe containment) - Spark protection inside the chamber - Exhaust port with reversible overpressure flap - Connections for external inerting (e.g., nitrogen) - Emergency stop / manual activation of fire suppression system - Cable ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, where fire or flames may occur without explosion or uncontrolled propagation. It is not an abuse or destruction testing device, but a safe, standards-compliant test chamber for realistic operational and failure scenarios. Technical Key Data: - Temperature range: –10 °C to +100 °C - Chamber volume: approx. 698 liters - Racks: 4 × stainless steel - Max. load per rack: 45 kg - Max. total load: 100 kg Electrical Data: - Power supply: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse protection: 16 A - Refrigerant: R134a - Protection class: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm - Weight: approx. 285–300 kg Summary – why this unit is outstanding: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ fire suppression system - Large chamber (≈700 l) - High market and resale value - Condition: used Scope of delivery: (see picture) (Technical data and specifications subject to change and errors!) Further questions? Please feel free to contact us by phone.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2022, BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ Extinguishing System Device Description: For sale is a BINDER KB 720 (E6) refrigerated incubator, year of manufacture 2022, equipped with the enhanced safety and performance test package “P Plus”. This unit is not a standard laboratory incubator, but rather a high-quality safety test chamber specifically designed for aging, performance, and safety testing of lithium-ion energy storage devices. Special Value: The unit is designed to reliably detect, monitor, and safely contain critical battery events up to EUCAR Hazard Level 5 (fire/flames, no explosion). What can the unit do? (Section 2 – Performance & Application): - Conducts aging tests on lithium-ion cells - Performance tests (charge/discharge cycles under controlled temperature) - Long-duration and thermal cycling tests - Testing of both unpowered and cyclically powered cells - Highly precise and reproducible temperature control throughout the chamber - Ensures safe execution of tests under realistic thermal conditions - Suitable testing environment for R&D, automotive, e-mobility, and energy storage technologies Ideal For: - Battery and cell manufacturers - Research and development laboratories - Test labs & safety inspections - Automotive / e-mobility / energy storage sectors P Plus Package transforms the KB 720 into a true battery safety test chamber: Integrated Safety Features: - Automatic and manual CO₂ fire suppression system - Smoke detector with visual and audible alarm - Mechanical double-door locking (secure containment) - Internal spark protection - Exhaust port with reversible overpressure flap Klodpfsx Hf A Rjx Ahhst - Connections for external inertization (e.g., nitrogen) - Emergency stop / manual release for extinguishing system - Cable ports for charging and measurement cables Result: The unit is designed for testing lithium-ion cells up to EUCAR Hazard Level 5, in scenarios where fire or flames can occur without explosion or uncontrolled spread. It is not an abuse or destructive test device, but rather a safe, standards-compliant test chamber for real-world operating and fault scenarios. Technical Specifications: - Temperature range: –10 °C to +100 °C - Internal volume: approx. 698 liters - Shelves: 4 × stainless steel - Max. load per shelf: 45 kg - Max. total load: 100 kg Electrical Data: - Power connection: 200–240 V AC - Frequency: 50 / 60 Hz - Phase: single-phase - Power consumption: approx. 2.1 kW - Fuse: 16 A - Refrigerant: R134a - Protection rating: IP 20 Dimensions & Weight: - External (W × H × D): approx. 1250 × 1950 × 900 mm - Internal (W × H × D): approx. 970 × 1250 × 576 mm In Summary – Why this device stands out: - Genuine battery safety test chamber - Suitable for EUCAR Hazard Level 5 - Integrated CO₂ extinguishing system - Large chamber (≈700 L) - High market and resale value - Weight: approx. 285–300 kg - Condition: used Scope of Delivery: (See photo) (Subject to technical changes and errors. All details without obligation!) If you have any further questions, please feel free to contact us by phone.

Kondisi: siap digunakan (bekas), emco-test-m4c-025-hardness-tester Klodpsyybt Eefx Ahhet

Kondisi: sangat baik (bekas), RMS RMS Sistem Pengujian Getaran Elektrodinamik Penggerak Getaran SW 3006+ Penguat Daya TGA 1500 Data teknis: Sinus: 3,7 kN Kebisingan: 3,7 kN Ksdpfx Aehyly Rohholt Kejut: 3,7 kN Jarak pk-pk: 26 mm Kecepatan: 0,9 m/dtk Percepatan: 80 g Pendinginan: pendingin udara Kondisi: bekas Belum diuji! Pengujian tidak memungkinkan Ruang lingkup pengiriman: (lihat gambar) (Perubahan dan kesalahan pada data teknis dan informasi dapat terjadi!) Untuk pertanyaan lebih lanjut, silakan hubungi kami melalui telepon.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2017, 1,0 unit Sistem pemeriksaan tanpa kontak dengan kamera inframerah performa tinggi NOXANT, dapat memeriksa hingga 400 bagian per menit. Kamera Produsen: NOXANT Tipe: Noxcam640-IMD Tahun pembuatan: 2017 Lembar data teknis tersedia atas permintaan. Kendali: Produsen: IMDvista Tahun pembuatan: 2017 Kedpfxewufpyo Ahhjlt Seluruh sistem dipasang di dalam sel dari Beck, Swiss.

Kondisi: sangat baik (bekas), Binder Type: Binder ED 53 A high-quality BINDER ED 53 drying oven, made in Germany, is offered for sale. Kodoynh E Ajpfx Ahhelt This unit is ideally suited for laboratory, workshop, research, electronics, materials testing, or hobby applications requiring constant temperatures. Features: - Precise digital temperature display - Robust industrial quality - Uniform heat distribution - Made in Germany - Ideal for professional applications What can the device do? The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering materials - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably controlled. Thanks to its high-quality insulation and workmanship, the unit operates evenly and stably. Technical specifications: Model: BINDER ED 53 Temperature range: up to 300 °C Nominal power: 1.20 kW Connection: 230 V / 1N~ Current consumption: approx. 5.3 A Frequency: 50–60 Hz Protection class: IP20 Temperature protection: DIN 12880 Device class: 2.0 Internal volume: approx. 53 liters Dimensions (approx.): External dimensions: approx. 63 × 63 × 57 cm (W × H × D) Internal dimensions: approx. 40 × 40 × 33 cm Weight: approx. 40–45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Changes and errors in the technical data may occur. All information is subject to confirmation!) Further questions can be answered by phone.

Tahun pembuatan: 2014, Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 13RO210, Kami menawarkan spektrometer portabel Oxford Instruments PMI-MASTER Pro bekas ini, tahun pembuatan 2014. Klsdeywwr Sjpfx Ahhjt

Kondisi: bekas, Espec Model: TSD-100 100-liter usable chamber volume for larger test specimens up to 30 kg. Compliant with all common international standards. Water-cooled Temperature range, hot chamber: +60 °C to +200 °C Temperature range, cold chamber: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 mm (W x H x D) External dimensions: 1100 x 1885 x 1965 mm (W x H x D) Water-cooled refrigeration unit Programmable control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile design 2 stainless steel specimen baskets Cable entry Ø 100 mm Refrigerant: 3 kg R404A, 1 kg R23 Power supply: 400V 3Ph 50Hz Max. current consumption: 32A Condition: used Weight: 1100 kg Important information for your peace of mind as a buyer! The following procedures are carried out on our offered chambers in advance: 1. Functional test and replacement of necessary components Ksdpfx Ahjxugq Ashelt 2. Re-filling with legally compliant refrigerant as required 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications may be subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), en-Thermo Scientific Thermo Scientific Forced Convection Drying Oven UT 6200 F with External Temperature Control Unit Single STW150 Temperature Control System 85°C Thermo Scientific Forced Convection Drying Oven UT 6200 F with External Temperature Control Unit Complete Laboratory Temperature Control and Drying System Description – Function & Application For sale is a professional temperature control and drying system consisting of: Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single Water Temperature Control Unit STW 150/1-3-10-K5 The forced convection drying oven ensures uniform temperature distribution inside and is ideally suited for drying, heating, and conditioning samples, components, or materials. Heating is performed via the external water temperature control unit (external heater). This enables very stable, indirect, and gentle temperature control for the material — without localized overheating and with homogeneous heat distribution. Typical Areas of Application: Laboratory & Research Industry & Production Material Testing / Component Drying Targeted conditioning, heating, and drying at a constant temperature Robust laboratory and industrial quality—reliable and durable. Device 1 – Forced Convection Drying Oven: Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F Technical Data: Klodpoymn Egofx Ahhst Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Protection class: IP20 Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg Device 2 – Water Temperature Control Unit: Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5 Technical Data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating capacity: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm Weight: 55 kg Overall: Complete temperature control and drying system Can be operated together (external heating / external heater) Total weight: approx. 155 kg Important Notice: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and information!) We are happy to answer further questions for you over the phone.

Kondisi: sangat baik (bekas), Memmert Model: UFP 800 Standard Equipment - Electronic Fuzzy-assisted PID process controller with continuous performance adjustment and a time-saving self-diagnosis system for quick error detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal log memory with 1024 kB for recording actual temperature, set temperature, air turbine, air flap, and fault states with time stamp - Device control and logging of actual values on MEMoryCard XL - Programmable sequence control for up to 40 ramp segments - Adjustable air turbine for forced convection units (adjustment in 10% increments) - Servo-driven adjustable air flap (adjustment in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn encoder for easy operation of the unit - Visual alarm indicator - Built-in buzzer for alarm in case of limit violation, as an acoustic signal at the end of a program, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic monitoring following the setpoint (ASF) - Mechanical temperature limiter (TB Safety Class 1) - Monitoring relay for shutting off heating in the event of a fault Klsdoymm Erspfx Ahhot - Two separate PT100 temperature sensors, DIN Class A, 4-wire design for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent switching chamber and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and to read out the controller's internal log memory Technical Specifications: - Interior: stainless steel, highly stable and easy to maintain due to deep-drawn ribbing - Housing (outer body): textured stainless steel, rear panel made of hot-dip galvanized sheet steel - UFP 800 mobile and lockable on wheels - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N~ 400 V 50/60 Hz - Power consumption: approx. 4800 W, 7A - Condition: used - Scope of delivery: (see photo) (Changes and errors in technical data and information excepted!) For further questions, we are happy to assist you by phone.

Kondisi: sangat baik (bekas), en-GB Ksdpoymdc Isfx Ahholt

Kondisi: sangat baik (bekas), binder-fd53-en Kodpoyma Nwjfx Ahholt

Kondisi: sangat baik (bekas), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 Offered for sale is a professional materials testing machine from Zwick/Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been properly maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Nominal Force: 10 kN Test Type: Tensile and Compression Testing Technical Specifications: Crosshead Speed: 0.001 – 1,000 mm/min Speed Accuracy: 0.01% of nominal speed Travel Resolution: 0.038 µm Positioning Repeatability: < 2.0 µm Max. Test Frequency: 0.5 Hz Measurement Acquisition Rate: 500 Hz Data Transfer Rate to PC: 10–100 Hz Force Measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Working width: 440 mm Lower test area height: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Line frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Fuse rating: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Status: 18.09.2017 Machine BT1-FB010TN.D30 Kedpsyl T U Dsfx Ahhjlt testXpert II Version 3.2 tC-PC System Ambient temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibration at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation prior to measurement series: 120° testXpert control Documented service and calibration records available. Software & Control: Software: testXpert® II Documented Version: V3.2 Installation documentation from Version 2.2 Documentation as of: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components: DCSC measurement module Force transducer Xforce P / Xforce HP Incremental encoder (rotary travel measuring system) Force measurement in accordance with ISO 7500-1 Mounting under moving crosshead Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of Delivery: Materials testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation binder with records Scope of delivery as shown in the pictures. (Specifications and technical details subject to change and correction!)

Kondisi: baik (bekas), For sale: Professional Vision Engineering Lynx Compact X6 stereo microscope, manufactured in the UK. This is a modern, eyepiece-free microscope, providing a spatial 3D image without the need to place your eyes against the eyepieces – offering exceptional comfort for quality control and precision assembly work. Technical data: • Manufacturer: Vision Engineering Ltd. (UK) • Model: Lynx Compact X6 • Magnification: 6× (Compact X6 objective) • Type: Stereo, eyepiece-free • Illumination: Integrated LED lighting in the base • Power supply: 230 V • Focus and head height adjustment • Serial number: MFS 11572 • DGUV safety inspection – current safety compliance marking Condition: • Used, optics are clean, mechanics fully operational. Klodpfsxtfqxox Ahhet • Damaged upper plastic cover (visible in the photo) – does not affect operation or image quality. • Illumination works properly. • Device tested and ready for operation. Applications: Laboratories, quality control, electronics, optics, and medical industries. Excellent for precision work, SMD soldering, PCB inspection, micromachining, and micromechanics.

Tahun pembuatan: 1999, Kondisi: bekas, Kami menawarkan Vötsch VT 7100 bekas ini, tahun pembuatan 1999. Klsdpfx Ahsyu Hwqehot

Kondisi: sangat baik (bekas), Professional, mechanical analog hardness tester for measuring metal hardness according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power supply – ideal for quick on-site measurements, production, or quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Hardness Tester • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power • Clear analog measuring scale — Set includes: • Hardness tester Kjdpfx Aevbwzijhhjlt • Carrying case • Operating manual in German • Complete set of adapters and sleeves (as shown in the set) Condition: like new / old stock Equipment unused or only tested a few times – no signs of wear.

Kondisi: siap digunakan (bekas), binder-ed-240-e2-en Kodeyvun Ispfx Ahhelt

Kondisi: sangat baik (bekas), en: CTS type CW-60/7 Walk-In Climate Test Chamber CTS Walk-In Climate Chamber 7m³ Temperature & Humidity Testing -60–120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. A professional walk-in climate and temperature testing chamber for industry, research, and quality assurance. This system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from –60 °C to +120 °C - Climate testing with 10–95 % relative humidity - Programmable temperature and humidity cycles - Endurance tests - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Especially suitable for: - Electronics testing - Solar modules (previous field of use) - Automotive components - Materials testing - Endurance tests The air circulation system ensures highly uniform temperature distribution throughout the entire 7 m³ test space. Technical Data: Temperature –60 °C to +120 °C Rate of change approx. 2 K/min Humidity 10–95 % rH Dew point range +5 °C to +89 °C Refrigerant R404A/R23 Max. permissible pressure: 25 bar III.6 Short User Guide Size Test volume: 7 m³ Walk-in design Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Kljdpfxjylxaxo Ahhot Power Supply / Connection 400 V, 3/N, 50 Hz Nominal power: 43.1 kW Rated current: 67.5 A Protection class: IP 54 Weight: 4,000 kg Condition: used Scope of delivery: (see photos) (Subject to technical modifications and errors. All data provided without guarantee!) If you have further questions, we are happy to assist you by phone.

Tahun pembuatan: 2009, Kondisi: siap digunakan (bekas), 1001 Klodpsyu T Dkjfx Ahhet