Penyaring debu udara bersih dengan inverter frekuensi

AL-KO / Alko Power Unit 350+ P FU

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2023, 1 Ksdpfx Ajw S Tyaoc Hedr

Kondisi: baik (bekas), Tahun pembuatan: 2017, NUMERICALLY CONTROLLED EDGE BANDER WITH EDGE TRIMMER (SPINDLES) & CORNER ROUNDING UNIT Brand: SCM Model: K 360 HP-T-ER1 Serial No.: AH/120944 Ref: 123304 Year: 2017 MACHINING CAPACITIES: - Panel height to be processed: 8 - 58 mm Thickness: 10 to 45 mm when using the corner rounder - Panel length to be edged: 210 to 2500 mm - Minimum panel width to be processed: 90 to 1100 mm - Edge tape thickness (in coils): 0.4 - 3 mm without corner rounding, max 3 mm when using the corner rounder - Edge strip thickness (in strips): max 6 mm without corner rounding, max 3 mm with the corner rounder - Edge width: panel thickness + 2 mm on each side - Feed drive (feed speed): 11 m/min - Minimum panel distance: 600 mm - Panel overhang relative to transfer chain (panel projection): 30 mm MACHINE CONFIGURATION: - StarTouch control panel - Pre-set for barcode reader - Unwinding plate Ø800 mm - Frontal extension table - Easy Size: digital positioning of entry fence and panel height - Anti-adhesive spray unit - Edge trimmer (Rectifier RT-V) 12,000 rpm - Infrared panel pre-heating at entry - Gluing unit (VC-VM) with interchangeable glue pot for granulate, 1 kg capacity. Warm-up time: 12 minutes Pneumatic pre-cut guillotine Digitally positioned pressure unit (press) with 3 rollers, including 1 motorized and timed roller - End trimming unit, tiltable 0-20°, 12,000 rpm - Top/bottom flush trimming unit, digitally positioned with copying system. 1/4 radius 2 mm cutter (or bevel) 12,000 rpm - Corner rounding unit R2mm 12,000 rpm, digitally positioned - Top/bottom radius scrapers R1&2 mm, digitally positioned - Top/bottom straight scrapers - Edge finishing spray device (Nebulizer) ADDITIONAL CHARACTERISTICS: - Trimmer motors: 2x2 kW - Saw motors: 2x0.19 kW - Height adjustment motor: 0.30 kW - Feed drive motor: 1.1 kW - Flush trimming (milling) motors: 2x0.65 kW - CE marking - Lockable contactor, emergency stop buttons - Main power supply: 380V, 3-phase, 50 Hz - Pneumatic supply: 8-10 bar (max), dry air - Extraction: 1x Ø100 mm and 5x Ø80 mm Trimmers: 780 m³/h, Flush trimmers: 360 m³/h, Scrapers: 2x360 m³/h Maximum operational footprint: 10.80 x 2.40 m Transport dimensions (LxWxH): 4.85 x 1.20 x 1.70 m Weight: 1568 kg Machine supplied with mounted tooling, manual, spare parts list, and schematics. Kdjdpfx Acsrx S Ipo Hor

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, Vacomat 350 XP TWIN Kodpfjzp Edwsx Ac Hedr Penyedot debu berukuran besar Vacomat 350 XP TWIN adalah perangkat hemat energi yang luar biasa di antara penyedot debu portabel. Dua motor yang dikontrol frekuensinya (masing-masing 5,5 kW) memastikan daya penyedotan yang sesuai, terutama dalam kondisi operasi yang sangat bervariasi. Dengan demikian, hanya energi yang dibutuhkan yang digunakan. Penyedot debu ini memproses volume udara hingga 10.000 m³/h dan sangat ideal untuk menyedot debu dari mesin CNC besar atau seluruh pusat pemesinan. Sistem kontrol inovatif dan sangat cerdas mengotomatiskan proses penyedotan dengan mesin yang terhubung. Penyedotan dimulai secara otomatis segera setelah mesin pemesinan yang terhubung dihidupkan. Jika kebutuhan daya lebih rendah, hanya satu kipas yang dihidupkan. Segera setelah beberapa titik penyedotan beroperasi, kipas kedua dihidupkan secara otomatis. Secara standar, pembersihan selang filter dimulai secara otomatis selama jeda operasi, segera setelah semua mesin pemesinan yang terhubung dimatikan. Kemudian, sistem penggetar filter kami yang dipatenkan menggunakan sambungan udara bertekanan untuk membersihkan secara pneumatik/mekanis melalui semacam "pengocokan" (tekanan masuk 6 bar, kebutuhan udara per siklus pembersihan sekitar 11 l). Sebagai opsi, terutama jika kandungan debu sangat tinggi dan sangat halus, seperti debu gipsum, tersedia sistem pembersihan dengan semburan tekanan yang efisien. Pembersihan melalui tangki udara bertekanan dilakukan secara offline, setelah operasi penyedotan (PERHATIAN: tinggi bangunan kemudian +100 mm dan panjang +350 mm). Vacomat kami dibuat berdasarkan prinsip modular. Secara standar, campuran debu dan serpihan kayu dibuang ke dalam empat wadah pengumpul serpihan yang kedap debu (4 x 120 l) dengan kantong plastik yang kokoh di dalamnya. Saluran vakum menjaga kantong tetap terpasang dengan aman di dalam wadah pengumpul. Jendela pandang memudahkan untuk memeriksa tingkat pengisian. * Kebutuhan energi rendah berkat motor efisiensi tinggi modern (IE3) "Made in Germany" serta desain internal rumah yang dioptimalkan untuk aliran udara dengan resistansi udara yang rendah. * Pemulihan panas melalui prinsip sirkulasi udara: udara buangan panas difilter dan dialirkan kembali ke bengkel. * Kondisi operasi yang tenang: lapisan selang filter dua lapis meredam suara yang dihasilkan di dalam Vacomat secara langsung. Selain itu, rumah kipas dirancang untuk meredam suara. * Disetujui untuk pemasangan di dalam ruangan di area debu kayu - diproduksi sesuai dengan standar DIN EN 16770 yang baru. * Udara balik yang sehat: bahan filter berkualitas tinggi dan yang dirancang khusus dari kain filter jarum poliester antistatis memfilter 99,9% debu dan serpihan dari udara (kelas debu M untuk debu St 1, sesuai dengan TRGS 553). * Keamanan yang ditingkatkan melalui langkah-langkah perlindungan terhadap kebakaran dan ledakan sesuai dengan peraturan DIN EN 16770: diuji terhadap tekanan hingga 20.000 Pa, sistem pemadam api bubuk yang diaktifkan secara otomatis - tidak ada kerusakan akibat air! * Keandalan pengoperasian: sensor tekanan terus-menerus memantau daya penyedotan. Pesan kesalahan ditampilkan melalui lampu indikator. * Biaya operasional yang rendah berkat komponen berkualitas tinggi dan umur pakai media filter yang lama: misalnya, ruang peredam yang dirancang secara ekstra besar memastikan pemisahan awal serpihan kasar. Dengan demikian, selang filter tidak diberi beban tambahan. * Biaya

Kondisi: baru, Tahun pembuatan: 2025, New machine Year of manufacture: 2025 Standard equipment and accessories - Swiveling control panel, easily accessible by the operator, "eye-S 15" electronic control. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for precise zero point determination Kdedpfxox Nbzuo Ac Her * Capability to store up to 1,000 programs with corresponding images * Capability to store up to 1,000 different tools with corresponding images * USB port * Preparation for network connection - Operator assistance via electronic control, complete with: * Tool database management * Indication of coordinates for 3 points on the tool for determining a new zero point * Management of tool edge speed * Operator assistance for common machining processes - "Flex" fence with automatic adjustment via electronic control. Entire fence setup corresponds to tool diameter, infeed jaw for the desired chip removal—"FLEX" fence displacement from the worktable. - Aluminum fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface adjustment - Electrical preparation for a feed unit - Spindle with clockwise/counterclockwise rotation - Automatic motor start - Version M-E complete with: * Electric spindle with maximum output from 3,400 rpm * Electric spindle power: 7.5 kW / 10 HP [S6 -40%] * Interchangeable MK5 spindle * Inverter for spindle speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake, effective even without main power supply - Safety sensors for tool change: spindle stop, spindle locking, opening/closing tool holder - Electropneumatic spindle locking - Micro safety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - 24V auxiliary circuit - CE Declaration of Conformity - 931201 Frequency: 50 Hz - 083250 Base - 109993 MACHINE LANGUAGE: German - 109999 Standard safety regulations - 570257 Manual device for feed support height adjustment according to workpiece thickness, with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the control panel column, this device allows the feed unit to be swivelled away from the worktable. - 930731 Voltage: 400 V EU - 570288 Quick tool clamping "T-SET" Allows clamping/unclamping of tools by simply using a compressed air gun. - R00845 L'invincibile TI 5 CE configuration - 110293 "LL" version: worktable with two cast iron table extensions, total length 2,500 mm, complete with extendable support rail for wide workpieces - Emergency stop button - 131304 Milling spindle diameter: 30 mm. Availability: short notice

Kondisi: bekas, nomor mesin/kendaraan: 006488, Area kerja sumbu X: 2500 mm Area kerja sumbu Y: 850 mm Daya spindle utama: 5 kW Jumlah sumbu yang dikontrol: 3 sumbu Jumlah spindle bor: 11 Kedpfxjwuclxj Ac Hedr

Kondisi: baru, Integrated pre-separator Integrated automatic fire suppression system Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet highly effective: OPTI JET cleaning and bag filter with snap ring closure. Exceptionally economical: Energy-efficient IE3 class drives. Safe in any event: Maintenance-friendly automatic fire suppression system. Quiet operation: Sound-insulated air recirculation from AL-KO. Maximum flexibility: PLC control for manual and automatic operation. Numerous options—from machine recognition and slide valve control to frequency-regulated operation, to name just a few. No spills: Collection containers with inspection windows. Practical down to the last detail: Container lock with ergonomically shaped tension lever. Retrofittable: Conversion to discharge via briquetting press or rotary valve possible. - High suction capacity - Compact footprint - 100% air recirculation without temperature loss (residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control system - Optimal filter cleaning - Minimal noise level - Optional: Patented fill level monitoring - Maintenance-friendly, certified automatic fire suppression system - Dust barrier for dust-free container exchange (optional: safety interlock for containers) - Freely configurable modular design, expandable ----- Technical Data ----- Extraction port Ø: 300 mm Nominal airflow: 5,089 m³/h Maximum airflow: 6,000 m³/h Maximum negative pressure: 2,587 Pa Filter area: 30 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor 400 V: 7.5 kW Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm Sound pressure level: 71 dB(A) Weight: 838 kg Standard: GS-HO-07 - New exhibition machine - Kjdpfx Acou R S A Re Hedr

Kondisi: sangat baik (bekas), Edge banding machine HEBROCK K36 Airtronic - used - PC control with display, touchscreen, swivelling control panel, program memory, automatic adjustment of pressure bridges, feed via transport chain, extendable workpiece support, motorised adjustable infeed fence, diamond pre-milling cutters for both climb and conventional cutting, quick heating glue pot, change system for glue pot, suitable for PUR adhesives, cross-cut saw with HF motor, flush trimming unit, flush/radius/chamfer milling unit, pneumatic switchover for milling unit, multi-milling tool, multi-radius scraper, chip extraction box for radius scraper, air nozzle at radius scraper, surface scraper, air nozzle at surface scraper, change motor for corner rounding, spray device for separator agent, spray device for cleaning agent, spray device for antistatic coolant, spray device for lubricant, LED lighting in machine compartment, interchangeable glue pots, zero-joint Airtronic system ----- Technical Data ----- Edge thickness (coil material): 0.5–3 mm, max. edge thickness for corner rounding: 3 mm, workpiece thickness: 8–60 mm, workpiece thickness for corner rounding: 45 mm, min. workpiece length: 200 mm, feed speed: 7–10 m/min, support plate ø for edging material: 850 mm, cutting knife for coiled material up to: 3 mm, power of pre-milling cutters: 2x2.2 kW, power of cross-cut saw: 0.37 kW, power of milling unit: 2x0.37 kW, power of corner rounding: 0.37 kW, power of buffing unit: 2x0.18 kW, dust extraction port ø pre-milling unit: 60 mm, Kedpeymyp Refx Ac Hsdr compressed air connection: 7 bar, total length: 5,540 mm, dimensions (LxWxH): 5,540 x 1,210 x 1,450 mm, weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Kondisi: bekas, Tahun pembuatan: 1993, ANGULAR PROFILING MACHINING CENTER Kdodorx Tcgjpfx Ac Her Brand: SAC Model: P4 Serial No.: 9304 Year: 1993 Model: F5 Serial No.: 93030 Year: 1993 Machines available for inspection in our workshops SPECIFICATIONS: - Cutter spindle speed: 6,000 rpm

Kondisi: baru, Tahun pembuatan: 2025, anschlussdurchmesser-355-mm-winter-entstauber-cleaner-10000 Kdedpfxowugp Us Ac Hjr

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, daya: 7,35 kW (9,99 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, diameter spindel: 30 mm, rentang pivot: 46 °, kecepatan rotasi (maks.): 18.000 rpm, kecepatan rotasi (min.): 1.000 rpm, The new profil 92 M e-motion spindle moulder is the Format4 premium model offering maximum operating comfort and guaranteeing absolute efficiency with the shortest setup times for milling work. The advanced electric spindle features an HSK 63F interface for a pneumatic tool quick-change system. The swivel range of ±46° enables unlimited machining options. The intuitive e-motion controller, integrated into a 15" touchscreen panel, allows the spindle speed, spindle height, angle, fence position, and even the table opening to be set intuitively and precisely. Memory slots for tools, spindles, and milling programs ensure perfect repeat accuracy and minimal setup times. Electronically controlled, eccentric insert rings maximize the table support area and significantly reduce setup effort, especially when swiveling the spindle. The newly developed, heavy-duty precision milling fence features two controlled axes for precise depth adjustment of the entire fence and an additional, independent depth setting for the right infeed jaw. For easy access during curved milling operations, the fence can be swung completely out of the working area. Optionally, the Format4 profil 92 M e-motion can also be equipped with an electrically height-adjustable power feeder. Further Technical Data: - Maximum tool diameter: 250 mm - Usable spindle height: 140 mm - Height adjustment: electric Optional Equipment: 12 Volt-free contact 106 HSK 63F milling spindle, Ø 30 mm, 140 mm 118 Safety rulers Integral 650 mm 119 Table opening 255 mm with controlled, eccentric insert rings 183 Table extension both sides 670 mm with 2200 mm pull-out frame 213 Electrically height-adjustable feeder support incl. horizontal tube 220 Parts list holder with A9 clipboard Advantages: - Highly efficient electric spindle with stepless speed and HSK 63F interface - Position control for milling height and milling angle +/–46º - Position control for milling fence including offset - Smartouch with intuitive e-motion controller - Table opening with controlled, eccentric insert rings (option) - Electrically adjustable height for the feeder on the overhead column (option) Further Information: Kjdpjwztr Nefx Ac Hedr The electric spindle features an HSK F63 tool quick-change system Clamping range: 2-25 mm for OZ25 collets Safety rulers “Integral,” 650 mm Table extension, both sides 670 mm with 2200 mm pull-out frame Table opening 255 mm with controlled, eccentric insert rings