Sistem laminasi

BARBERAN RFU-4-C-1700

Tahun pembuatan: 2000, Kondisi: baik (bekas), Barberan Laminating Line For any inquiries, please contact: 790800714 The line is in continuous operation. Maximum laminating width: 1300 mm Minimum workpiece thickness: 3 mm Maximum workpiece thickness: 40 mm Maximum workpiece length: 2800 mm Minimum workpiece length: approx. 600 mm Variable speed control from the brush cleaning station, maximum speed: 20 m/min. The line includes: Hnjdjilqvropfx Alcol - Tommassini automatic loading system (non-operational) - Top and bottom brushing machine - Pre-heating lamps before upper and lower glue rollers - PVAC glue applicator - Additional top and bottom drying lamps - Calender line with steel rollers for pressing - Additionally, the line is equipped with a purchased top-side corona treater (operational) – enables single-sided lamination with PP films

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Granulator eksentrik EGR digunakan dalam produksi plastik yang sensitif terhadap suhu dan geseran. Mesin ini dirancang khusus untuk granulasi PVC lunak, PVC keras, formula HFFR, atau compound berbasis elastomer untuk kabel tegangan rendah, sedang, dan tinggi. Selain itu, mesin juga dapat digunakan sebagai ekstruder sekrup tunggal konvensional untuk berbagai tujuan pemrosesan. • Diameter sekrup: 200 mm Hnedpfx Aow Iu T Tjlcol • dengan zona penguapan • Daya penggerak: 72,5 kW

Kondisi: baik (bekas), Through-feed line for door leaf processing, high-performance machine—processing of a single leaf (lock box, handle, and hinges) in approximately 30 seconds. Hnodpfouq Scpjx Alcel The machine consists of two sections, each with a left and right station performing specific operations. The first section: the left station mills for the lock faceplate and drills for the handle and key; simultaneously, the right station drills for the hinges. The second section: the left station creates and deepens the lock pocket; at the same time, the right station screws in the hinges.

Kondisi: bekas, Regoplas RT50 Термо-масляный терморегулятор Термо-масло до 300°C Hodpfx Aljdmn E Hscsnl

Tahun pembuatan: 2004, Kondisi: siap digunakan (bekas), Max. working width: 1000 mm, feed rate: 5-20 m/min, height: 2200 mm, length: 4000 mm, weight: 3.3 t, complete with documentation, regularly maintained. Hodpfoi E Trpex Alconl

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Hnjdsg Ezarepfx Alcjl Medium: water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg EQUIPMENT HIGHLIGHTS: - Controls: Temperature control (standard) - Control via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures specified performance even at low flow rates) - Heating control via solid state relays (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In the event of an incorrect water/glycol mixture, the system issues an automatic warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature controllers) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (non-ferrous metal-free option available) - All medium-conveying components and piping insulated for low-temperature application - Water-cooled condenser (air-cooled on request) OPTIONS: - Flow rate control: up to 100 l/min, >4 l/min +/- 5% of measured value - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Specimen drainage using compressed air - Cooling water monitoring - Supply pressure limitation - Further special options available on request and subject to technical review Please visit our website for more details or for other performance classes. *This device complies with European Directives. Other directives and standards are only met if specified in the order confirmation. This technical specification reflects the standard configuration; customer requirements deviating from the standard will be specified in quotations or order confirmations.

Kondisi: baru, Tahun pembuatan: 2024, nomor mesin/kendaraan: CAT3512BJLY892034, jenis bahan bakar: diesel, daya: 1.280 kW (1.740,31 hp), produsen motor: Caterpillar 3512B, bauwesen_14000kg_1600kva Hnsdpewvdvuofx Alcsl

Tahun pembuatan: 2001, Kondisi: bekas, • Size of heating plate (mm): approx. 1500 x 2700 • Max. usable area (mm): 1250 x 2450 Hnodpfx Alokt N Hujcsl • Loading side (mm): 1500

Kondisi: hampir baru (bekas), Inline folie-sealmachine en krimptunnel Merk: Kallfass Type: Semi/automatische krimptunnel Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Bereik: 1600 (transportband) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Hsdpfx Aljg D Nv Tjcenl Elektrisch: 380V+N+PE, 65 kW Staat: In huidige staat, werkend

Kondisi: bekas, Tahun pembuatan: 2016, Angle plate saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control Os Labeling labeling machine with onboard graphic labeling of the parts with illustrations Software for label print management Optiplanning cutting optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade protrusion: 95 mm Motorized rollers for side loading onto lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic recognition of throwaway panel (sacrificial panel) based on thickness specified in the machine data Low stack stop Automatic side loading. Includes: safety grids, double photo cell, push-button control panel, electrical pre-installation for the two motorized pre-roller conveyors, and reinforcement with 4 rollers instead of fork passages in the pre-roller conveyor Intermediate roller conveyor Side feed pre-roller conveyor, dimensions 3800 x 2200 mm, with motorized rollers (height from floor: 325 mm) Gravity conveyor for feeding longitudinal offcuts to corner systems, 4500 mm (total length: 7295 mm) 3000 mm extension of the gravity conveyor for also conveying cross-cut offcuts Long chute for manual transfer of cross-cut section to central gravity conveyor Air cushion outfeed table, 2050 x 850 mm, fitted with front wheels Air generator for up to 6 air cushion levels MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the cross axis. The presence of this device allows the minimum panel length required for cross-cutting to be reduced from 1830 mm to 1220 mm. Automatic device for detecting saw spindle deflection in angular installations (longitudinal and transverse), consisting of a sensor that detects deflection directly on the saw shaft and a device that detects the blade revolutions directly at the chuck. Remote cycle start panel Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Additional mobile lateral aligner on the cross axis Main saw blade, max. diameter mm, 15 KW Scoring blade, max. diameter mm, 2.2 KW Hodpfeuc Idxsx Alconl Saw carriage speed 1-140 m/min – brushless motors Longitudinal pusher carriage speed 90 m/min Cross pusher carriage speed 135 m/min Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the cross carriage (8 fixed grippers + 2 on the cross carriage, multi-pusher system) Cutting system for thin panels