Mesin gergaji pita

BERG & SCHMID - Halbautomat GBS 305 AutoCut

Kondisi: baru, Cutting diameter: 305 mm Bandsaw blade length: 3,375 mm Bsdpfju Dbvtjx Afpell Cutting width: 350 mm Bandsaw blade dimensions: 3,375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangle: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangle: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 0.7 t Space requirements approx.: 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° left and 45° right - Material height sensor - Ball-bearing mounted turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic cooling system

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, fibreboard and offcuts, veneers, MDF boards, plastic, etc.) ✔ Motor power: 30 kW ✔ Rotor length: 870 mm ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80-120 rpm ✔ Number of cutting knives: 2x19 ✔ Granulation: 10-50 mm ✔ Capacity: up to 7 m³/h* ✔ Extraction port: 200 mm Blsdpfx Aeiq U D Eofpjl ✔ Feed opening: 1446 x 1565 mm ✔ Dimensions (L/W/H): 2.15/1.97/2.04 m ✔ Weight: 2050 kg 2 years warranty or 2000 operating hours

Kondisi: baru, With air flow rates of up to 22,000 m³/h, the stationary compact filter units of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger machining centers. Eligible for BAFA funding under Module 4. ECO JET series units are equipped with clean-air-side mounted fans, which draw dust- and chip-laden air towards the filter unit. The highest performance DUO models are fitted with two fans operating in parallel. A flange connection at the filter unit’s inlet allows for the attachment of individually sized ductwork. Thanks to aerodynamically optimized airflow within the separation chamber, coarse particles are immediately removed before reaching the filter sleeves. Remaining dust separated by the filters is automatically cleaned off by the AL-KO OPTI JET® filter cleaning system, with the collected material being discharged into mobile collection bins beneath the filter unit. Applications: - Extraction at manufacturing machines, machining centers, or ductwork systems with multiple extraction points Blsdpfjwwtuiox Afpol - Direct extraction during continuous operation - Industries such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics production and processing, paper production, orthopedic technology, and many others Advantages: - Wide range of standard extraction systems with many customer-specific adaptation options - Consistently high extraction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings due to possible 100% recirculation operation in many cases - Small footprint due to compact design - Suitable for both indoor and outdoor installation - Available in ATEX-compliant versions - Comprehensive accessories and numerous options for individual system configuration - Eligible for BAFA funding under Module 4

Kondisi: baru, Tahun pembuatan: 2026, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial helical gear motor - Automatic shut-off after end of cut - Mechanical saw blade tensioning with electric band break monitoring - Quick-release, movable vise - Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) - Electric coolant pump - Precision ground carbide saw blade guides (adjustable) - Large-diameter round support table, rotates with miter cuts, miter angle display (scale) on operator side - Direct switch between manual operation and lowering mode - Easily removable chip collection tray - Material stop 500 mm with scale - Including combination-tooth saw blade 4/6 Technical Data - Motor: Three-phase, 400 V, pole-changing, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheel diameter: 300 mm Bodpfx Aofg Eq Rjfpsll - Cutting speed: 40/80 m/min - Vise clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Further accessories available upon request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN OFFICIAL FLOTT PARTNER AND CAN OFFER YOU THE ENTIRE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Kondisi: baru, Cutting capacity at 90 degrees: round 305 mm Bedsnq Sanopfx Afpoll Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangular 350 x 200 mm Saw blade dimensions 3375 x 27 x 0.9 mm Blade speed 18 - 110 m/min Table height 940 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.61 t Space requirement approx. 1.5 x 1.75 x 1.9 m Double-mitre metal band saw with AutoCut function - Mitre cuts up to 60° to the left and 45° to the right - Ball-bearing mounted rotary table - Vice laterally adjustable - Solid, large material support - Automatic cooling system Image shows semi-automatic version.

Kondisi: baru, Cutting diameter 280 mm Saw band length 3370 mm Cutting width 350 mm Band saw dimensions 3370 x 27 x 0.9 mm Cutting capacity at 90° round 280 mm Cutting capacity at 90° square 250 mm Cutting capacity at 90° rectangle 350 x 200 mm Blsdpfxeivuqto Afpsl Cutting capacity at 45° round 240 mm Cutting capacity at 45° square 220 mm Cutting capacity at 45° rectangle 230 x 220 mm Cutting capacity at 60° round 170 mm Cutting capacity at 60° square 150 mm Cutting capacity at 60° flat 170 x 100 mm Band saw speed 37 + 74 m/min Total power requirement 1.8 kW Machine weight approx. 0.6 t Space requirement approx. 1.5 x 1.7 x 2.0 m

Kondisi: bekas, Tahun pembuatan: 2003, de_to_en_001 Blsdpfx Afeywd I Tepel

Kondisi: baru, Tahun pembuatan: 2026, CORMAK S200R adalah mesin pemotong pita untuk logam yang dirancang untuk produksi skala kecil dan massal. Dengan kemampuan memotong pada rentang -45° hingga +60°, mesin ini sangat ideal sebagai mesin pemotong pita untuk pipa dan profil. Konstruksi yang didasarkan pada rangka besi cor yang kokoh dan sistem pemandu mata pisau yang presisi memastikan akurasi dan konsistensi setiap pemotongan. Pemakanan dilakukan secara gravitasi melalui silinder hidrolik dengan pengaturan penurunan yang halus, yang menjamin proses pemotongan yang terkontrol. Keunggulan utama mesin: * Konstruksi yang kokoh dari coran besi meningkatkan daya tahan mesin dan presisi pemotongan. * Pemotongan sudut pada rentang yang luas, dari -45° hingga +60°, berkat lengan yang dapat diputar. * Pemandu mata pisau dari karbida dan bantalan memastikan kelurusan dan umur panjang pita pemotong. * Pemakanan gravitasi yang dikendalikan oleh silinder hidrolik dua ruang. * Keamanan kerja berkat sakelar mikro, sakelar batas, dan tombol darurat. * Penghentian otomatis setelah pemotongan selesai dan fungsi perlindungan jika pita putus. Konstruksi dan teknologi: Mesin ini didasarkan pada dasar baja yang kaku dengan tangki cairan pendingin dan pompa sirkulasi terintegrasi. Lengan mesin pemotong dibuat dari satu coran besi, yang secara signifikan meningkatkan stabilitas dan peredaman getaran. Penggerak dilakukan oleh motor tiga fase dengan dua kecepatan pita (36/70 m/menit), yang dipilih dari panel kontrol. Kemiringan lengan sebesar 25° relatif terhadap dasar memperpanjang umur pita pemotong dan meningkatkan kualitas pemotongan. Presisi dan efisiensi kerja: Akurasi pemotongan yang tinggi adalah hasil dari interaksi pemandu karbida dan bantalan. Mempertahankan tegangan pita dalam rentang yang optimal meningkatkan efisiensi proses pemotongan dan meminimalkan risiko kerusakan. Penghentian otomatis setelah pemotongan selesai menghilangkan kesalahan operator dan meningkatkan keamanan kerja. Aplikasi: Mesin pemotong pita untuk logam S200R sangat ideal untuk digunakan di pabrik industri, bengkel las, perusahaan konstruksi, dan departemen pemeliharaan. Ini memungkinkan pemotongan baja karbon, baja tahan karat, baja perkakas, profil tertutup, dan material padat secara presisi. Peralatan standar: * Penjepit mekanis dengan mekanisme pengencangan cepat * Silinder hidrolik dengan pengaturan penurunan yang halus Bljdpfx Afjfy Ttispsl * Sikat pembersih pita * Pompa cairan pendingin dan sistem sirkulasi tertutup * Penghalang dengan penggaris untuk mengatur panjang Peralatan opsional: * Sistem rol untuk memasok material Data teknis: Mesin pemotong pita logam CORMAK S200R Manual Jenis pemotongan: Gravitasi Kecepatan pita: 36 / 70 m/menit Pemotongan sudut: dari -45° hingga +60° Jenis penjepit: Manual Pita pemotong: 27 x 0,9 x 2910 mm Daya motor: 1,8 kW Tinggi dasar penjepit: 890 mm Diameter pemotongan minimum: Ø 5 mm Panjang minimum di penjepit: 30 mm Dimensi (P x L x T): 1600 x 800 x 1400 mm Berat: 500 kg

Kondisi: baik (bekas), Tahun pembuatan: 2021, Pemotongan mitra hingga 60° ke kiri dan 45° ke kanan Kapasitas pemotongan pada 90 derajat: bulat 255 mm Kapasitas pemotongan pada 90 derajat: persegi 240 mm Kapasitas pemotongan pada 90 derajat: persegi panjang 300 x 180 mm Panjang pita gergaji 2.765 x 27 x 0,9 mm Bjdpfx Afjyuyb Njpoll Tinggi meja 950 mm Kecepatan pita variabel 18 - 110 m/menit Kebutuhan daya total 1,5/1,8 kW Berat mesin sekitar 420 kg Meja putar dengan bantalan bola Rahang penjepit cepat Penopang material besar Perangkat pendingin termasuk: Roller table masukan 2x2000mm Perangkat ukur 4000mm di sisi keluaran dengan tampilan digital

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, luas filter: 160 m², Perlengkapan: dokumentasi / manual, NESTRO Extraction System Year of Manufacture 2022 – Modern Industrial Plant – Excellent Condition Nestro Extraction Unit Jet NFHSU 11125, 160 m² Filter Area, incl. 2x Electric Diverter Valves, excl. Spark Extinguishing System, Year 2022 Description For sale is a high-quality, modern extraction system from NESTRO Lufttechnik GmbH, year of manufacture 2022. The system comes from an industrial application and is in correspondingly good, well-maintained condition. Owing to its recent manufacturing date, it features up-to-date technology, high energy efficiency, and modern control components. 👉 Ideal for joineries, woodworking, manufacturing operations, and industrial applications generating dust and chips. Technical Key Data (excerpt) Manufacturer: NESTRO Lufttechnik GmbH Year of manufacture: 2022 Duct diameter: Ø 300 mm Electric diverter valves included Diverter valve motor power: 0.12 kW Operating voltage: 400 V Frequency: 50 Hz Robust industrial design Scope of Supply - Filter system / filter housing - Fan / negative pressure fan - Control system (incl. modern system controller) - Ductwork and components (according to inventory) - Diverter valves - Steel framework / installation stand Condition ✔ Year of manufacture 2022 – very modern condition ✔ System was in operation and has proven performance ✔ Well-maintained overall plant ✔ Inspection possible at any time Features ✔ Very recent year of manufacture ✔ Premium manufacturer (NESTRO) ✔ Modern control technology ✔ Energy-efficient and future-proof ✔ Significantly more economical than a comparable new system ✔ Excellent for rapid integration into existing operations Important Notes Sale in current condition Dismantling and loading by the buyer Optional assistance with dismantling can be arranged Sale without warranty Condition / Warranty The offered machine is sold as a used system. The sale takes place under exclusion of any liability for material defects. The machine is sold as inspected and under exclusion of any warranty. The seller provides no guarantee for functionality, performance, or suitability for a specific purpose. Disclaimer Any liability for material defects is excluded. This does not apply to damages arising from injury to life, body, or health, nor to cases of intentional or grossly negligent conduct by the seller. Dismantling and Transport Dismantling of the machine shall be carried out by the buyer at their own responsibility and cost. The buyer bears all costs and risks associated with dismantling, loading, and transport. Transfer of Risk Bledpoywfl Hefx Afpjl Risk is transferred to the buyer at the latest with the start of dismantling or loading. Other No liability is assumed for hidden defects. All information regarding the machine (e.g., year of manufacture, operating hours, technical data) is provided to the best of our knowledge but without guarantee.