Wadah press press limbah basah

Bergmann MPB405 SN/10

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, Wet waste compactor press container Bergmann MPB405 SN/10 suitable for skip loaders 10 m³ usable volume inspected, serviced, fully functional Painting in desired RAL color possible Kfodpfx Aasxql Dgehsa We will be happy to provide a quotation including delivery.

Kondisi: sangat baik (bekas), Complete Desktop Metal 3D Printer System Here we offer you a complete Desktop Metal 3D printer system. Desktop Metal 3D Printer Studio System Complete system: 3D printer + debinding machine + sintering furnace Manufacturer: Desktop Metal The three-part solution comprises a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Condition: Used (Good) Year of manufacture: 2019 Desktop Metal Studio System includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology Features: - Printed materials: Metal - Technology: FDM - Application: Industrial - Other features: Office-compatible - X-axis travel: 30 cm (12 in) - Y-axis travel: 20 cm (8 in) - Z-axis travel: 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, this printer extrudes bound metal rods—similar to an FDM printer. This eliminates the safety requirements commonly associated with metal 3D printing and enables new features such as the use of closed-cell infill for lightweight, strong parts. 1.2 Desktop Metal Studio Debinder (Debinding Machine) - Fully automatic debinding - Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low-emission design, it does not require external ventilation and is safe for office environments. Automatic fluid distillation and recycling means no refilling is required between cycles. 1.3 Desktop Metal Studio Sintering Furnace - Hybrid technology (microwave & conventional heating elements) - Build volume: 305x205x205 mm Kfjdpok Hz Nqsfx Aahea - Carbon steel housing - Gas supply: 2 x 900 L gas cylinders - Heating power: 20 kW Features: - Function: Sintering - Configuration: Chamber - Heat source: Gas - Other features: High-temperature, automatic - Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through a standard office door, the furnace delivers industry-grade sintering in a package suitable for office environments. Built-in, material- and build-specific temperature profiles ensure uniform heating and cooling, avoiding residual stresses typical of laser-based systems. Condition: used / gebraucht Scope of delivery: (see picture) (Subject to modifications and errors in technical data, specifications are subject to change!) If you have further questions, we are happy to answer them by phone.

Tahun pembuatan: 2025, Kondisi: baru, The LITech hammer mills HM 120 / 200 / 300 / 400 are ideally suited for the pre-crushing of medium-hard, tough, and brittle materials such as soils, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals, and many more! Kodpfxog Ay Dhe Aahsfa

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2012, jam operasional: 25.895 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 78 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.500 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 24.000 kg, kapasitas tangki oli: 1.000 l, daya: 55 kW (74,78 hp), laju aliran volumetrik: 930 m³/jam, Technical Data — Baler: Manufacturer: Presona AB Type: LP 80 VHK 1 Year of manufacture: 2012 Total operating hours (machine): 25,895 hours (as of July 2025) Effective pump operating hours: 14,135 hours (as of July 2025) Number of bales produced: 235,597 units (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/hour Kjdjvwlqqjpfx Aahofa Throughput under operating conditions: 410 m³/hour Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: 30 kg/m³: approx. 9 to 12 t/hour, material-dependent 50 kg/m³: approx. 14 to 17 t/hour, material-dependent 100 kg/m³: approx. 16 to 25 t/hour, material-dependent Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine weight (baler): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four running rollers on the press ram replaced - Wire station with guide rollers for the bottom wire cleaned and made operational - Side guides removed from press ram, smoothed, reinstalled and readjusted - Main hydraulic cylinder removed, dismantled and inspected - Piston rod replaced, cylinder tube honed - Complete seal kit replaced, pressure test performed - Hydraulic hose from main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced - Door contact switches checked and partially replaced - Emergency stop button tested - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers below the baler replaced - New safety grids for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed and baler tested in manual and automatic operation Scope of delivery: Only the baler is for sale. Remarks: All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Kondisi: bekas, Tahun pembuatan: 2019, Suitable for the generative manufacturing of high-precision 3D components using the SLM powder bed process. Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminium, precious metal alloys, Inconel. Accessories: Kfedpfxswhiycs Aahoa - Full enclosure - rePLUG “Standard” powder unit for powder storage and supply, extraction of metal powders from the process chamber and automatic sieving. - CELOS for LASERTEC SLM - Fire suppression system al-deco-STD – extinguishing unit: 5-liter argon bottle - CELOS App II OPTOMET (Basic) software package for automatic precalculation and optimization of process parameters for selected materials: - Max. travel X-axis: 325 mm - Max. travel Y-axis: 325 mm - Max. travel Z-axis: 400 mm - Build volume: 300 x 300 x 300 mm³ - Layer thickness: 20–100 µm - Laser type: Ytterbium laser - Laser power (max): 400 W - Minimum focus diameter: 35 µm - Tank volume: 50 dm³ - Power supply approx.: 400 V / 50 Hz - Weight approx.: 1200 kg - Colour: Light grey, dark grey, red

Tahun pembuatan: 2003, jam operasional: 43.000 h, Kondisi: perlu perbaikan (bekas), nomor mesin/kendaraan: HBC 140 2x75kW 2003 (W230-005), nl-naar-en Ksdekcgynopfx Aahefa

Kondisi: baik (bekas), Manufacturer: MBT Type: MV-250 S Kfjdehzr U Ijpfx Aahsa Motor: 5.5 kW Hopper size: 780 x 600 mm Housing dimensions: 3500 x 1000 x 2200 mm

Tahun pembuatan: 2025, Kondisi: baru, -Drum diameter: 1600 mm -Drum length: 2880-3880-4880 mm -Working length: 2000-3000-4000 mm -Screen holes according to your specifications -The screen is made from closed-profile sections -A cleaning brush with a diameter of 300 mm is mounted on the screen and along the entire length of the working section -Flat bar paddles mounted in the drum center enable material turnover -Drum rotation speed approx. 11.5 revolutions per minute Ksdpfx Aeq T Sp Hoahjfa -Screen feed via geared motor – Drum drive via geared motor + 2 rubber drive wheels, diameter 230 mm -Screen equipped with electrical control panel -Gravity feed hopper, dimensions: Width 1600 mm, Length 1400 mm, Height 1200 mm -12 months warranty -Made in Europe -CE compliant

Kondisi: bekas, Tahun pembuatan: 2010, PPN/pajak selisih: PPN dapat dikreditkan Kjdpfx Aasvpghzohsfa

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, Gewicht 4.950 kg, Gesamtgewicht 12.000 kg 5,5 kW Kodpfx Aaowpmckshjfa