Edgebander

BIESSE AKRON 1400

Kondisi: bekas, Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, BIESSE Edge Banding Machine AKRON 1440-A Automatic single-sided edge banding machine for gluing and processing straight panel edges using coil material (melamine, PVC, ABS, veneer) and strip material (solid wood, HPL, knife-cut veneers, etc.) • NC control with touchscreen display • Automatic start of unit motors. • Direct selection for second pass. • Production data acquisition. • Software-guided maintenance. TECHNICAL DATA Workpiece thickness: 10–60 mm Workpiece thickness with MFU unit (profile-dependent): 10–35/60 mm Edge height: 14–64 mm Edge thickness (coil material): 0.4–3 mm Edge thickness (strip material) (*): 0.4–10 (12) mm Workpiece overhang: 25 mm Minimum panel length: 140 mm Minimum width (at 140 mm length): 85 mm Minimum width (at 250 mm length): 50 mm Feed speed: 12 m/min Extraction*: 8x connection Ø100 mm Hodexzb Iijpfx Abxok Compressed air: 7 bar Glue pot capacity: approx. 2 kg * Depending on selected units. - GLUING UNIT VC-511 Applies the hot-melt adhesive to the workpiece, feeds the edge material to the workpiece, automatically cuts the edge from the coil, and presses it onto the workpiece, ensuring perfect positioning. - END TRIMMING UNIT IN-801 For trimming front and rear edge projections at angles from 0° to 15°. - 2-MOTOR MULTIFUNCTION PROFILE MILLING UNIT AR02 E For corner rounding and profile milling of workpiece edges made from synthetic materials up to max. 3 mm thickness. PRE-MILLING UNIT RT02 Prepares the workpiece prior to glue application. Equipped with two 1.8 kW high-frequency motors running at 12,000 rpm. SCRAPING UNIT RB02 For post-processing thick PVC/ABS edges. GLUE JOINT SCRAPER RC02 Unit for removing excess adhesive in the transition area between the edge and the panel. Equipped with tracing rollers and a flat knife with insertion control. BUFFING UNIT SZ02 For cleaning and buffing the workpiece edge using cloth polishing wheels. The unit automatically adjusts to the workpiece thickness. ANTI-ADHESIVE SPRAY SYSTEM ADZ02 Precision application of anti-adhesive via injectors activated by numerical control. KIT PRO-GLUE The PRO-GLUE kit includes the following components: • TEKNO-GLUE system for optimal gluing via: - controlled monitoring of the glue roller - automatic retraction at feed stop - automatic ON/OFF of the gluing unit REVERSE system for switching the glue roller between forward and reverse operation. Electrical and mechanical preparation for use of special glue pots for POLYURETHANE adhesive in machines configured for EVA glue. NC axis for the fine trimming unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface. Pair of multi-profile cutters for fine trimming unit: 25-degree chamfer cutter, R=2 mm + R=1 mm, and straight profile for solid wood. NC axis for the profile milling unit Kit for automatic setting of the sensor according to edge thickness. Adjustment is controlled via the operator interface. Function for corner-only processing NC axis for the scraper unit Kit for automatic setting of tracing rollers and tools according to edge type and thickness. Adjustment is controlled via the operator interface.

Kondisi: bekas, nomor mesin/kendaraan: 007350, X-axis working range: 4000 mm Y-axis working range: 1400 mm Working area: With vacuum console supports Main spindle power: 15 kW Number of controlled axes: 4 axes Number of drilling spindles: 30 Number of tool positions: 28 Hsdpfx Aswcyd Iebxek

Tahun pembuatan: 1997, Kondisi: baik (bekas), • Working width (mm): 1300 • CSD system • Cross-belt sanding unit • Longitudinal sanding unit – shoe • Brushing unit Hsdpjidi Ivefx Abxok • Ionization

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Edge Control system with 18.5" touchscreen color display 16:9 Swiveling control panel Program memory Motorized pressure bridge adjustment Feed via transport chain Feed rate: 8-18 m/min Extendable workpiece support Motorized adjustable infeed fence Jointing unit 1961 Diamond jointing cutter for climb and counter-rotation Automatic adjustment to workpiece height Edge feeding unit 1903 Pre-trimming up to 3 x 45 mm (material dependent) 1905 Multi-System glue application system Automatic glue height adjustment with sensor nozzle Pressure regulator for adjusting cartridge pressure PUR adhesives can be used Pressing unit 1913 MOT, 1st roller driven End trimming unit 1918 with pneumatic adjustment End trimming saw pneumatically tiltable Multi-function unit 1824 MOT 4 with multi-profile cutter, profiles 1,2,3 mm Corner copier unit 1832 Corner copying function up to 3 mm edge thickness Radius scraper 1929 MOT 2 with motorized adjustment of horizontal tracing rollers and pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper Flat scraper 1964 for removing glue residue for a clean glue joint With extraction hoods Spray unit 1856 for infeed and outfeed zone Buffing unit 1940 for finishing and edge polishing Hedpfx Aev Sv Enebxek ----- Technical Data ----- Edge thickness, coil material: 3 mm Edge thickness, strip material: 8 mm Max edge thickness for corner copying: 3 mm Workpiece thickness: 45 mm Workpiece thickness for corner copying: 45 mm Min. workpiece length: 180 mm Feed speed: 8-18 m/min Distance to workpiece support: 470 mm Support plate diameter for edge material: 800 mm Cutting knife for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimming saw power: 2 x 0.22 kW Milling station power: 2 x 0.35 kW Corner copying power: 0.22 kW Extraction port, jointing unit: 120 mm Extraction port, milling unit: 70 mm Extraction port, scraper unit: 70 mm Total length: 5,350 mm Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Photo of operating hours taken in 2022 Availability: short-term Location: Röllbach

Kondisi: bekas, Tahun pembuatan: 2017, Number of spindles: 5 pcs Working width: 240 mm Planing height: 120 mm Surfacing table length: 2,500 mm Feed motor: 4 kW Feed speed: 6–36 m/min Weight: approx. 3,500 kg Control system: SCM Control 10 SCM Superset NT with workpiece return ----- Machine fully inspected. Short summary: ----- - 5 spindles - Powerful motors - Left and top spindles motorized for width and height adjustment - With workpiece return to the operator 1st Spindle ----- First lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm 2nd Spindle ----- First right vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system 3rd Spindle Hedpfxowwl Nlj Abxok ----- First left vertical spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic horizontal positioning / motorized width adjustment 4th Spindle ----- First top horizontal spindle Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6,000 rpm T-Set quick-change system Electronic radial positioning / motorized height adjustment 5th Spindle ----- Second lower horizontal spindle Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6,000 rpm SCM Control 10 user interface Including workpiece return Including available used cutterheads (Technical specifications according to manufacturer – no guarantee!)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1995, Max. panel width: 4400 mm Hodpfsmt Hhwjx Abxjk Max. panel length: 4300 mm Max. main saw blade projection: 110 mm Number of clamps: 8

Kondisi: baik (bekas), BRANDT Highflex 1440 Edgebander Well-equipped, available for inspection before purchase. Pre-milling cutters Hodpfx Ast Hxxpsbxjk Glue application Pneumatic pre-cut guillotine Pressure rollers Finishing saws Top and bottom pre-milling unit 2 x multi-function milling units Profile scraper Flat scraper Polishing unit The machine features NC control for the milling units and a pneumatic package. Max workpiece height: 60mm Max edge tape thickness (coil): 3mm Feed speed max: 14m/min Well-maintained machine, in very good condition.

Kondisi: baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, System comprising: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM • Max. cutting length: 4,500 mm • Max. main saw blade projection: 95 mm • Max. opening of clamping grippers: 90 mm • Min. panel dimensions (from rear): 1,830 x 915 mm • Max. panel dimensions (from rear): 3,100 x 2,200 mm • Min. panel thickness for rear feeding: 3 mm • Worktable height: 985 mm • Main saw motor: 15 kW • Main saw blade diameter: 380 mm • Scoring saw motor: 2.2 kW • Scoring saw blade diameter: 200 mm • DIGISET: electronic adjustment from scoring to main saw • QUICK CHANGE: fast saw blade change at the push of a button • Saw carriage drive: 1–140 m/min • Integrated side aligner in saw carriage: 0–4,200 mm • Automatic measuring system for manual cuts • Pusher extension from 5,500 to 7,800 mm • 10 pneumatic double-finger grippers on the pusher • 3 front aligners • 16 support roller rails behind the machine table • 4 rounded air cushion tables in front of the machine table, incl. movement device for table 2 • Automatic ejection of end pieces beyond the cutting line • Material support surface under the pusher with brush-mounted rollers, designed for sensitive surfaces • Machine table with air jets for sensitive surfaces • Automatic device for main saw blade monitoring consisting of a sensor measuring saw blade deflection and a system for monitoring the main spindle speed Software package: Hjdpfx Ajxranpobxsk — QUICKOPTI for cut plan optimization directly on the machine — VERSION OSI PLUS INTERFACE — OPTIPLANNING OPTIMIZATION SOFTWARE, incl. hardware dongle, enabling management of up to 10 network users — OS LABELLING: Graphical editor on the machine control with part drawing; real-time label printing on the machine possible — COMMUNICATION BETWEEN STORE FEED SYSTEM AND SELCO • Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8,000 mm • Rotatable suction frame 0–180° with controlled axis • Panel alignment/squaring system with 3 photocells mounted on pneumatic cylinders • Panel weight detection via load cell mounted on suction frame in the separation area; checks if panel weight is within expected range for the panel type. If not, the panel is returned and the separation cycle restarts. • Roller conveyor for stack infeed and outfeed: 4,200 mm Software: — LINE SUPERVISOR with warehouse mapping and catalog, import of processing data from optimizer, bill of materials management, and system control.

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X-axis: 4,300 mm X-axis pendulum operation: 1,620 mm Y-axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X-axis: 3,300 mm X-axis pendulum operation: 600 mm Y-axis: 1,240 mm Work table: 8 ATS workpiece supports, each with 3 vacuum cups 8 rear workpiece stops, retractable via program, integrated in each support 8 workpiece stops, 670 mm from rear, integrated in each support 2 + 2 lateral workpiece stops 4 removable center stops 6 pneumatic lifting rails, retractable via program, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups EPS (Electronic Positioning System) Automatic central lubrication Division of the vacuum system into 2 separate working zones in X direction Auxiliary vacuum system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 m³/h Machining head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, each individually selectable Hsdpfx Abjxraimsxjk 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, 120 mm diameter fixed in X direction Grooving saw, 120 mm diameter fixed in Y direction Routing spindle 13.2 kW (11 kW S1-duty), HSK 63 F Mounted on Z1 axis Speed range 1,000–24,000 rpm Right and left rotation C-axis 360 degrees for aggregate adapters Cleaning nozzle for cleaning the milled edge prior to the edge banding operation Tool magazine for 16 tools Edge banding unit suitable for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360° infinite rotation Glue application for hot melt adhesive Double pressure roller, exchangeable and disconnectable Heating lamp for pre-heating edge material End trimming unit for cutting edge material at an 8-degree angle to the workpiece edge using a circular saw blade Technical Data: Plastic edge thickness 0.4–3 mm (*) Solid edge thickness 0.4–2 mm (*) (Best results are achieved using wood edges with primer, 0.4–1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. internal radius 18 mm, for edge thickness below 1 mm Min. internal radius 30 mm, with edge thickness 2 mm Minimum panel size for edging 300 x 300 mm Minimum internal cutout size for edging 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine, this solution restricts pendulum operation. Roll diameter of edge material: 800 mm Safety features: * Pressure-sensitive mats in front of the machine * Protective fence on the right with access door No tools included Control: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Aggregates: - Flush/Radius milling aggregate - Combination unit profile/flat scraper blade - Sawing aggregate

Kondisi: bekas, Tahun pembuatan: 2017, Direct numerical control (NC HOPS) with Campus software Hedewwiybjpfx Abxsk Working area X-axis: 3400 mm Working area Y-axis: 1600 mm Working area Z-axis: 300 mm Worktable with 6 adjustable rails Equipped with 3 suction cups per rail for holding the workpiece 1 electrospindle with 5 axes, 10 kW, with automatic tool changer, cone type HSK F63 Drilling head with 24 spindles as follows: - 12 vertical spindles (Y-axis) - 6 vertical spindles (X-axis) - 4 horizontal spindles (Y-axis) - 2 horizontal spindles (X-axis) Automatic tool change system with 18 positions – located at the rear of the machine Front guarding and safety system with mats and safety fences Automatic lubrication system Air conditioning unit for the control cabinet 1 vacuum pump