Mesin pengepakan bal
BOA D130 B 5V 5H 110

Tahun pembuatan

2008

Kondisi

Bekas (berfungsi sepenuhnya)

Lokasi

Goor

Mesin pengepakan bal BOA D130 B 5V 5H 110

Data mesin

Nama mesin:: Mesin pengepakan bal

Pabrikan:: BOA

Model:: D130 B 5V 5H 110

Nomor mesin:: V302591-20

Tahun pembuatan:: 2008

Kondisi:: bekas

Fungsi:: berfungsi sepenuhnya

Harga & Lokasi

Lokasi:: Goor, Belanda

Hubungi

Rincian teknis

Gaya penekanan:: 130 t

Lebar bukaan pengisian:: 1.620 mm

Panjang bukaan pengisian:: 972 mm

Lebar bal:: 1.100 mm

Tinggi bal:: 1.100 mm

Berat keseluruhan:: 41.000 kg

Tekanan:: 280 batang

Kapasitas tangki oli:: 2.450 l

Daya:: 150 kW (203,94 hp)

Rincian penawaran

ID iklan:: A21966498

Pembaruan:: terakhir pada 20.05.2026

Deskripsi

BOA Impress D130 B 110 with side tying – used baler, professionally maintained

Are you looking for a powerful, reliable, and immediately available baler? Then this BOA Impress D130 B 110 with side tying is an excellent opportunity.

This press was received by us as a trade-in. The previous owner, a customer in England, worked for years with this BOA and has now opted again for a new BOA installation. That says a lot about the trust in the machine, the brand, and the service behind it.

The press has been maintained throughout its entire operational period by our own BOA service team in England. This maintenance was always carried out with great care, ensuring the machine has a well-documented service history. The press was decommissioned in working condition and is currently in our storage facility, where it can also be inspected.

Before delivery, the machine will receive a technical check-up. Parts that need replacement will be replaced by us, ensuring the press is offered in good condition.

Why this BOA D130 B is interesting:

The BOA Impress D130 B 110 is a heavy-duty industrial baler with high pressing force, suitable for intensive use and high throughput capacities. Thanks to the side tying and robust construction, this is a strong solution for companies looking to process large volumes of material efficiently.

Technical specifications:

Type: BOA Impress D130 B-5V-1.6
Version: D130 B 110 with side tying
Hydraulic power: 110 kW
Main pumps: 2 × 55 kW
Back pressure pump: 5.5 kW
Filter pump: 5.5 kW
Oil cooler: 4 kW
Operating voltage: 400 V / 50 Hz
Insulation class: IP55
Hydraulic working pressure: 280 bar
Oil tank capacity: 2,450 liters

Pressing force: 1266 kN / 126 tons
Specific pressing pressure: 10.5 kg/cm²
Press stroke: 2900 mm
Channel size: 1100 × 1100 mm
Press chamber volume: 3.51 m³
Bale length: adjustable, approx. 1400 mm
Bale weight: up to approx. 1200 kg, depending on material
Dodpsy Tnzcsfx Ac Tskp
Number of binding wires: 5 vertical / 5 horizontal
Feed hopper: 1620 × 972 mm
Machine weight: approx. 45 tons
Noise level: < 85 dB(A)
Average loaded cycle time: 20 seconds

Availability:

The machine is currently stored with us and can be viewed by appointment. Because the press comes from our own trade-in, was decommissioned in working order, and has been maintained by our own service team, we can provide a clear insight into its technical condition and history.

A robust used BOA press with a well-known background, professional service history, and a check-up before delivery.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.

Dokumen

21966498-01.pdf

Penyedia

Terdaftar sejak: 2026

2 Iklan online

Hubungi

Kirim permintaan

Telepon & Faks

+31 74 20... iklan

Iklan-iklan ini juga mungkin menarik bagi Anda.

Iklan kecil

Mesin pembuat kantong kertas Windmöller & Hölscher Triumph 1

Рівне

9.920 km

Mesin pembuat kantong kertas
Windmöller & HölscherTriumph 1

Hubungi

Iklan kecil

Mesin cetak pra-cetak web lebar 2500mm Cobden Chadwick Linerflex

Hyde

11.776 km

Mesin cetak pra-cetak web lebar 2500mm
Cobden ChadwickLinerflex

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, lebar produk (maks.): 2.500 mm, lebar kerja: 2.500 mm, diameter rol: 1.500 mm, tahun perombakan terakhir: 2024, Cobden Chadwick Linerflex-Drucklinie 2500 mm – zum Verkauf verfügbar, siehe Fotos. Dies ist eine hervorragende Gelegenheit: Es handelt sich um die am besten erhaltene Pre-Print-Druckmaschine, die wir je zum Verkauf oder zur Verlagerung angeboten haben. Die Steuerung der Maschine wurde 2017 von Pre-Print Technology Ltd. auf den neuesten Stand gebracht – neue Servoantriebe zur Positionierung der Druckwerke sowie ein modernes Registersystem für die Nachfolgeeinheit. Bitte teilen Sie uns zeitnah mit, ob Sie die Anlage besichtigen möchten. Details zur Cobden Chadwick Linerflex Druckmaschine, Baujahr 1991 Standort der Maschine: Vereinigtes Königreich Djdpst Uc Iqofx Ac Tskp Zusammenstellung der Drucklinie: - 6-Farben C.I. Druckwerk - 1 Farbe Vorfärbeeinheit mit Schwenkarm (Cantilever) - 1 Farbe Nachfolgeeinheit mit Schwenkarm (Cantilever) - Doppelabrollung Wood & Stirling - Marquip Spleißer - Warburton Aufwickler - Antriebssystem für Vorfärbeeinheit, Chill-Rollen, Lackiereinheit und Aufwickler - Trocknung: IR-Kassetten von Waverley - Fife Bahnsteuerung - Servomotoren zur Positionierung der Druckwerke Technische Daten der ursprünglichen Ausführung: - Max. Geschwindigkeit: 300 m/min - Rapportlänge: 700–2000 mm in allen Einheiten - Zahnteilung: 10 mm - Maximale Druckbreite: 2.489 mm (98") - SPS: Mitsubishi - Hauptrahmen: hellblau/azur Zusätzliche Ausrüstung: - Heaford Cobra Montage-Proofgerät - AV Flexologic Montage-Proofgerät - Bestand an Druckzylindern (120 Stück) inkl. Zahnrädern und Hülse - Bestand an Rasterwalzen (17 Stück) inkl. Zahnrädern und Kupplungen - Cantilever-Druckhülsen (12 Stück) - Lagersystem für Druck- und Rasterwalzen mit Deckenlaufkran - C.I. Temperaturkontrolleinheit - Kühlgerät für Chill-Rollen - Druckwerke mit Rakelkammern und zugehöriger Farbversorgung - Mobiler Bedienwagen für Zugang zu den Druckwerken - Mobile Wagen für Druck- und Rasterwalzen - C.I. Hebe-Vorrichtung Betriebsspannung der Maschine: 415 V, 50 Hz

Lihat detail

Iklan kecil

LAMINATOR GULUNG KE GULUNG Guangming Printing Machinery Co. LTD. SDFM-1100

Złotniki

10.567 km

LAMINATOR GULUNG KE GULUNG
Guangming Printing Machinery Co. LTD.SDFM-1100

Hubungi

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2019, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 19101105, lebar rol: 1.100 mm, Perlengkapan: Pelat tipe tersedia, riwayat servis lengkap, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine designed for both cold and hot lamination. It is intended for single-sided film lamination of paper, with the laminated web subsequently rewound onto a roll. For cold lamination, the film is coated with a water-based adhesive and dried using a heated roller with a hot air drying system. The unwinding system feeds the paper into the lamination section, where, through heat and roller pressure, the film is bonded to the paper. The rollers feature a heated water circulation system with consistent temperature control. The paper roll is secured by shafts controlled by a pneumatic brake. The paper is unwound and fed into a web aligner equipped with automatic web-guiding to ensure precise film lamination. During lamination, film without adhesive is coated with water-based glue and then dried by a heated cylinder, or pre-glued film is unwound directly onto the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is bonded to the film through heat and pressure, applied by the lower rubber roller that presses the paper and film against the cylinder. The laminated web is then rewound onto a core in the take-up section, ready for further downstream processing. SDFM-1100 Specifications Maximum roll width: 1100 mm Maximum roll diameter: 1100 mm Paper weight: 80 - 500 g/m² Film thickness: 10-50 microns Operating speed: 10 - 65 m/min Electric voltage: 380V 50Hz Total power: 78 kW Maximum energy consumption: 30 kW Dedpfx Aovy Aipjc Tjkp Total weight: 8,000 kg Machine dimensions: 10,130 × 2,130 × 2,960 mm

Lihat detail

Iklan kecil

Újhartyán

10.424 km

Unwinder
JagenbergAbrollung achslos

€23.500

harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Unwinding tanpa poros dengan parameter berikut: Lebar jumbo roll maks.: 1400 mm Lebar jumbo roll min.: 480 mm Dsdpfsxlizfex Ac Tokp Diameter jumbo roll maks.: 1600 mm Diameter kepala penjepit: 150 mm dan 300 mm Kecepatan minimal: 300 m/menit Kontrol dapat diperbarui oleh kami sesuai permintaan.

Lihat detail

Iklan kecil

Plate Mounter dan proofer Bieffebi Mirage 309-180

Tata

10.503 km

Plate Mounter dan proofer
BieffebiMirage 309-180

€3.400

harga tetap ditambah PPN

Hubungi

Kondisi: baik (bekas), Used flexo plate mounting to proofing machine Product: Bieffebi Type: Mirage 309-180 Cylinder width: 1800 mm Print repeat range: 230–1000 mm Approximate floor area: 2.8 x 1 x 1.5 m Approximate weight: approx. 1500 kg Purchase, acquisition, and asset management of industrial equipment and machinery. Dedpfocx N Dqjx Ac Tokp Wide range of used machinery and industrial equipment.

Lihat detail

Iklan kecil

Lantai berjalan H & W H + W HWDKSS38 93 m³ Liftachse

Langelsheim

11.017 km

Lantai berjalan
H & WH + W HWDKSS38 93 m³ Liftachse

€9.900

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1941, berat kosong: 7.480 kg, berat keseluruhan: 38.000 kg, konfigurasi gandar: 3 gandar, pendaftaran pertama: 05/2011, inspeksi berikutnya (TÜV): 10/2024, panjang ruang muatan: 13.600 mm, lebar ruang muat: 2.470 mm, tinggi ruang muatan: 2.770 mm, volume ruang muat: 93 m³, suspensi: udara, ukuran ban: 385/65/22.5, warna: perak, Tahun pembuatan: 2011, Perlengkapan: ABS,

Lihat detail

Iklan kecil

Tørring

10.987 km

Mesin pelapisan jendela
KohmannF 750

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, Mesin penempel jendela KOHMANN - 750 - tahun 1999 Sistem Aliran Tunggal Panjang punching min. 100mm / maks. 1020mm Lebar punching min. 80mm / maks. 750mm Panjang film min. 50mm / maks. 720mm Lebar film min. 30mm / maks. 540mm Feeder bawah dengan pengaturan waktu Pilihan Besar Nok Operasi Pisau pemotong/perforasi Unwind film, Penyerahan sabuk kontinu, Pompa hisap dan tiup Panel Kontrol Listrik Manual & Peralatan Lokasi: Eropa Barat Kondisi Saat Ini: Sedang produksi Tersedia: Segera Foto dan video lebih lanjut tersedia. Dkodpfx Acjyzyhws Tsp Harga atas permintaan.

Lihat detail

Iklan kecil

Sztanctygiel / platen makan tangan Erba Titan 6PN

Otrębusy

10.305 km

Sztanctygiel / platen makan tangan
ErbaTitan 6PN

€37.500

EXW VB ditambah PPN

Hubungi

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: tiga fasa, Perlengkapan: Penandaan CE, Mesin pemotong Erba Titan 6PN Tahun produksi: 2000 Spesifikasi teknis: • Ukuran maksimum lembaran: 1210 x 1700 mm • Kopling dan rem pneumatik • Pelat pemotong keras Dkjdpfx Acjxb A Nhj Tjp • Pemasangan cetakan: dipasang dengan baut pada bodi • Tiga mode operasi mesin • Pompa pelumasan pusat • Sistem keamanan laser Mesin dalam kondisi teknis baik, sepenuhnya berfungsi dan siap digunakan. Ideal untuk perusahaan dengan volume produksi menengah hingga tinggi. HARGA EXWORKS POLANDIA: EUR 37.500

Lihat detail

Iklan kecil

Penyapu Tresu Flexo printing unit for inline integrati

Berlin

10.805 km

Penyapu
TresuFlexo printing unit for inline integrati

Hubungi

Iklan kecil

Sistem pelapisan NORDMECCANICA Duplex C - SL1300

Lindau

11.225 km

Sistem pelapisan
NORDMECCANICADuplex C - SL1300

€38.000

harga tetap ditambah PPN

Hubungi

Kondisi: bekas, Tahun pembuatan: 1995, lebar kerja: 1.300 mm, sambungan udara terkompresi: 7 batang, Machine Type: Coating and Laminating Line for Coating, Lacquering, and Laminating from Roll to Roll with Solvent-Free Adhesives Manufacturer: NORDMECCANICA Type: Duplex Compact Model: Duplex C - SL1300 Year of Manufacture: 1995 Web Width: 650 to 1,310 mm Laminating Width: Up to 1,300 mm Speed: Mechanical up to 300 m/min Materials for Coating: BOPP: 15 – 80 µm PETP: 12 – 30 µm LDPE, LLDPE: 40 – 200 µm OPA: 12 – 18 µm NYLON CAST: 50 – 80 µm ALUMINIUM: 15 – 40 µm PP CAST: 60 – 150 µm SATIN-FINISHED PAPER: 40 – 300 g/m² Materials for Lamination: BOPP: 12 – 80 µm Dkjdpfx Acoy Hgwpj Tjp PETP: 12 – 30 µm LDPE, LLDPE: 20 – 200 µm OPA: 12 – 18 µm NYLON CAST: 20 – 80 µm ALUMINIUM: 7 – 40 µm PP CAST: 25 – 150 µm EVOH: 12 – 20 µm CAST MATERIALS: 25 – 200 µm SATIN-FINISHED PAPER: 40 – 300 g/m² Unwind A: Model: 850 Roll Change: Automatic up to 300 µm Roll Diameter: 90 to 850 mm Roll Weight: Up to 900 kg Core Diameter: 70 / 76 / 150 / 152 mm Web Tension: 2.5 to 55 kg Coating Thickness: Up to 300 µm Corona Treatment Unwind B: Model: 850 Roll Change: Automatic up to 300 µm Roll Diameter: 90 to 850 mm Roll Weight: Up to 900 kg Core Diameter: 70 / 76 / 150 / 152 mm Web Tension: 2.5 to 55 kg Coating Thickness: Up to 300 µm Corona Treatment Coating and Laminating Unit: For solvent-free adhesives. Coating unit with 4 rollers, 2 of which are heatable. Laminating unit with 3 rollers. Rewind: Model: 850 Roll Change: Automatic up to 300 µm Roll Diameter: 170 to 850 mm Roll Weight: Up to 900 kg Core Diameter: 150 / 152 mm Web Tension: 6 to 55 kg Coating Thickness: Up to 500 µm Mixing and Metering Unit: Manufacturer: DOPAG, Switzerland Model: Variomix Heating Elements. 1 Trolley for mounting transfer rollers for adhesives. Electrical Connection: 220 / 3 x 400 V, 50 Hz Installed Power: 180 kW Max. Current Draw: 90 Amps Average Power Consumption: 35 kW Compressed Air Connection: Input Pressure: 7 and 10 bar Max. Consumption: 400 liters/min Water Consumption: 2,000 liters/hour Various spare parts. Standards: CE, CEE 89 / 392 ff. EN 60 204-1, SUVA Condition: Used Availability: Immediately

Lihat detail

Beriklan di sini