Bollegraaf HBC60A (30 kW)

Bollegraaf HBC60A (30kW)

Kondisi: siap digunakan (bekas), HSM VK 42/1200 fully automatic baler Pressing force: 42 tons Bale dimensions: 700 x 800 x 600 - 1200 mm Bale weight: approx. 450 kg Fedpsra Nrxofx Aaqegb Baler length: approx. 7 meters Baler weight: approx. 6,000 kg Automatic 4-fold wire tying

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 2.400 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: R40410, daya: 371,43 kW (505,00 hp), berat kosong: 75.000 kg, gaya potong: 900 t, Presse shear COPEX model REFLEX 900 ton diesel mobile (tahun 2023). Perawatan dilakukan oleh produsen. Kapasitas: 10 hingga 22 t/jam tergantung jenis scrap yang akan dipotong. Tersedia segera. Fgodpfjxg Ekfex Aaqjb

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2003, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: W230-028, gaya penekanan: 80 t, masa garansi: 24 bulan, tekanan: 250 batang, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2024, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The machine in question is an HBC80 baler (45kW) with vertical tying. This baler has been completely refurbished in our dedicated refurbishment workshop. The refurbishment has been performed in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. Following refurbishment, this baler is sold with a 2-year warranty included. The press is supplied with the following options: * support frames, * intermediate hopper, * bale exit chute, Fedpstvat Tefx Aaqsgb * wire spool platforms.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 37.656 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 85 t, lebar bukaan pengisian: 1.500 mm, panjang bukaan pengisian: 1.100 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 650 kg, berat keseluruhan: 25.000 kg, kapasitas tangki oli: 1.000 l, tahun perombakan terakhir: 2024, laju aliran volumetrik: 410 m³/jam, lebar transportasi: 2.400 mm, panjang transportasi: 9.300 mm, Good day, We hereby offer you, subject to prior sale, a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for the accuracy and completeness of this information. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours (as of March 25) Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale size: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Machine weight (press): approx. 25 t Note: The machine was used by a recycling company for compaction of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The baler is in good condition. Many wear parts and entire assemblies have already been renewed in the last 3 years. The machine has been regularly maintained. Fodpfxev T I Evj Aaqegb We would be pleased if this baler is of interest to you. Your Service Team, Mertens & Frowein GmbH

Kondisi: baik (bekas), Tahun pembuatan: 1981, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Mesin press kanal otomatis BOA Continu 25 LB + konveyor sabuk. Mesin press dalam kondisi baik dan selalu dirawat secara berkala. Pompa Denison baru saja mengalami perbaikan total. Berfungsi normal dan terus digunakan. Silakan hubungi kami untuk informasi lebih lanjut. Fedpfx Aasw S Tv Ujqogb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, jam operasional: 8.900 h, nomor mesin/kendaraan: LP50VH2, Used Presona LP50 VH2 baler in good working condition with conveyor belt Technical data: LP 50VH2 - Theoretical volume capacity: 730 m³/h - Maximum throughput under load: 340 m³/h - Productivity at bulk density: - 30 kg/m³ = 7–9 t/h - 50 kg/m³ = 8–9 t/h - 100 kg/m³ = 11–14 t/h - Hopper length: 1,500 mm - Hopper width: 1,100 mm - Loading chamber volume: 2.7 m³ - Bale width: 1,100 mm - Bale height: 720 mm - Bale length: adjustable - Bale weight: 400–550 kg - Number of vertical tying wires: 5 pcs - Press force: 50 t - Specific pressure: 63 N/cm² - Max. hydraulic pressure: 250 N/cm² - Oil tank volume: 600 l - Electric motor power 400 V, 50 Hz: 1 x 45 kW - Oil cooler: 1 x 1.5 kW - Net weight approx.: 16 t Fjdjyrhi Nepfx Aaqegb - Year of manufacture: 2014 2) Feed Conveyor - Conveyor type: Chain conveyor - Year of manufacture: 2014 - Specifications: - Conveyor width: approx. 1,300 mm - Length of horizontal section: 5,500 mm - Length of inclined section: approx. 10,800 mm - Conveyor weight: approx. 6 t Scope of delivery: Baler, control cabinet, operating panel, and conveyor belt for sale. Documentation (operating manual, CE declaration, electrical/hydraulic schematic) is complete. Inspection possible by appointment. We accept no liability for technical information or possible errors. Video footage can be provided upon request.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2009, jam operasional: 22.029 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 80 t, lebar bukaan pengisian: 1.000 mm, panjang bukaan pengisian: 1.400 mm, lebar bal: 1.100 mm, tinggi bal: 750 mm, berat bal: 600 kg, berat keseluruhan: 16.000 kg, daya: 45 kW (61,18 hp), tahun perombakan terakhir: 2025, Technical data of the baler: Manufacturer: Avermann Maschinenfabrik GmbH & Co. KG, Germany Model: AVOS 1410-45/80 Year of manufacture: 2009 Operating hours: 22,029 h (as of December 2025) Pressing force: 80 kN Specific pressing force: 103.9 N/cm² Feed opening dimensions: 1,400 x 1,000 mm Theoretical cycle time: 12 seconds Theoretical throughput: 300 m³/hour Bale dimensions: 1,100 x 750 mm (W x H), length variable Drive power: 45 kW Total connected load: 75 kW Tying: 4-fold vertical, fully automatic Throughput rates at a bulk density of: - 30 kg/m³: approx. 6.0 t/h - 50 kg/m³: approx. 10.5 t/h - 100 kg/m³: approx. 17.5 t/h Bale weights at a bale length of approx. 1.2 m: up to 600 kg, depending on material PLC control: Siemens S7-300 Display panel: pulsotronic Baler dimensions (assembled): 8,610 x 2,400 x 3,835 mm (L x W x H) Transport weight (baler): 16 t Special equipment: - Wear-resistant base made of HARDOX steel Fgjdpex A U Ncsfx Aaqeb - Special press ram for compacting "difficult" materials and loose bulk goods of small grain size - Control cabinet air conditioning - Machine stand increased by 200 mm Remarks: The machine has been serviced and partially overhauled in our workshop. The following work has been carried out and parts replaced: • Dismantling of the press ram, disassembly into individual components, servicing of the mechanics, replacement of the following plastic wear rails and plates: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Main plastic wear plate (support plate) centrally under the press ram • Replacement of steel guide rails left/right at the top of the frame • Replacement of the complete base plate, four-part, made of wear-resistant HARDOX steel • Wire feed rails in the press base newly welded and smoothed • Replacement of the counter knife, two-part, in the frame • Adjustment of the knife clearance to approx. 2.5 mm • Dismantling of tying and twisting unit, disassembly into individual components, servicing of the mechanics, replacement of all deep groove ball bearings and axial bearings on the twisting shafts, cleaning and adjustment of the wire knives, chains greased and tensioned • Support roller in front of twisting shafts renewed • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for tightness • Hydraulic oil is only one year old, was chemically analyzed, is still in good condition and was therefore not changed, but can continue to be used • General maintenance carried out Finally, the baler was subjected to a machine test in manual and automatic mode, see video for machine function test.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2000, jam operasional: 32.169 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 60 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.320 mm, lebar bal: 1.100 mm, tinggi bal: 720 mm, berat bal: 750 kg, berat keseluruhan: 22.000 kg, kapasitas tangki oli: 900 l, For sale is a complete baling plant consisting of conveying equipment, baler (partially overhauled and tested), and wire stations. Technical data for the baler: Manufacturer: Bollegraaf Recycling Machinery B.V. Model: HBC 60A Year of manufacture: 2000 Operating hours: 32,169 hours (as of November 2024) Main ram force: 60 t Pre-pressing force max.: 25 t Feed hopper dimensions: 1,320 x 1,100 mm Fgjdsviwdmspfx Aaqjb Theoretical cycle time: 18 seconds Bale dimensions: 1,100 x 720 mm, length variable Drive power: 45 kW Total connected load: 60 kW Tying: 5-fold vertical Throughput rates: With bulk density of 30 kg/m³: approx. 5.5 t/h With bulk density of 50 kg/m³: approx. 10 t/h With bulk density of 100 kg/m³: approx. 16 t/h Bale weights: 400 up to 750 kg (depending on material) PLC control: Telemecanique TSX Micro Machine weight (baler): approx. 22 t Scope of delivery: 1 chain belt conveyor 1 Bollegraaf baler HBC 60A with wirbulator 1 maintenance platform with access ladder 2 wire stations with deflection pulleys for 10 wire spool racks (without wire) The following repair and overhaul works were performed: - Hydraulic oil tank fully drained, cleaned, and refilled with new oil - Oil filter and air filter replaced - Hydraulic block partly resealed - Hydraulic hose on hydraulic block replaced - Wire feed wear tracks at bottom passages welded and smoothed - Tying mechanism cleaned and serviced - Electrical system refurbished, some door switch contacts replaced - Wirbulator repaired - General maintenance performed, lubricated - Machine tested in running mode, without material, in manual and automatic mode (see functional video) Remarks: The plant has already been fully dismantled, stored, and is available at short notice for loading. Documentation (operating manual, CE certificate, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical data or possible errors.

Kondisi: baru, Tahun pembuatan: 2025, Turbo mill MTR-800 The turbo mill is designed for grinding, disintegration, and granulation of materials to enhance the quality of end-product separation in subsequent recycling processes. Technical specifications: - Installed power: 75 kW - Chamber width: approx. 910 mm - Chamber diameter: approx. 620 mm Fgsdpjv I S Ukofx Aaqsb - Number of abrasive blades: approx. 89 pcs - Number of abrasive counter-blades: 18 pcs - Frame mounted on adjustable vibration isolators - Dimensions: 2200 x 1600 x 1550 mm - Chamber opening via manual hydraulic pump - Motor base equipped with rocker tensioner - Weight: approx. 1,950 kg - Discharge outlet terminated with fi-150 nozzle - Electrical installation with frequency inverter included in the price.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2014, jam operasional: 24.967 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 004283-0030, gaya penekanan: 122 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, masa garansi: 24 bulan, tahun perombakan terakhir: 2026, Perlengkapan: dokumentasi / manual, This fully refurbished baler is offered by Bollegraaf Recycling Solutions. This listing concerns an HBC120s baler (90kW) equipped with, among other features, cross-tying (5 wires vertical & 5 wires horizontal). This baler is currently undergoing a complete refurbishment in our overhaul workshop. The refurbishment is carried out in accordance with the stringent Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler will be sold with two years warranty included. Technical Specifications, type HBC120S Volume capacity (m3/h) - max.: 815 / 660 / 500 Bulk density (kg/m3) - max.: 20 / 50 / 100 Throughput capacity (T/h) - max.: 16.3 / 33 / 50 The above-mentioned capacities apply only if the machine is used correctly and is continuously and adequately fed with suitable material for at least one hour. Bale weight: approx. 1470 kg (depending on, among others, the type of material and length of bale) Bale length: variable / adjustable Bale height: 1100 mm Bale width: 1100 mm Hopper dimensions: 1100 mm x 1600 mm (these dimensions also determine the size of material that can be processed by the machine). Ram pressure force: max. 119.7 tons Pre-press flap pressure force: max. 65 tons Cycle time, excl. wire tying: 19 seconds Main drive motor: 90 kW (120 HP) Twistomat (knotter) motor: 1.5 kW, SEW Counter pressure pump motor: 1.1 kW (2 HP) Needle installation motor: 7.5 kW, SEW Oil cooler fan motor: 3 kW (4 HP) Pump for oil cooling motor: 4 kW (5.5 HP) Operating pressure: 315 bar Machine weight: approx. 40,040 kg Number of wires: - 5 vertical - 5 horizontal Oil volume: 1,655 liters Oil brand and type: BP-SHF-46 Color: Fgodpfx Ajxcir Eeaqsb - baler: RAL 6024 (green) - safety doors: RAL 1021 (cadmium yellow) Baler dimensions: - length: 11,765 mm - width: 2,500 mm - height: 7,104 mm