Rak kantilever, tinggi 2,60m, lengan 80cm, 750kg/Bruckkamp
Kragarmregal
Rak kantilever, tinggi 2,60m, lengan 80cm, 750kg/
Bruckkamp
Kragarmregal
Harga tetap ditambah PPN
€1.480
Kondisi
Baru
Lokasi
Hofheim am Taunus 

Data dasar
Harga & Lokasi
Harga tetap ditambah PPN
€1.480
- Lokasi:
- 65719 Hofheim am Taunus, Deutschland

Hubungi
Rincian penawaran
- ID iklan:
- A12134993
- Pembaruan:
- terakhir pada 20.08.2024
Deskripsi
Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new:
Price ex works, including loading!
Price: €1,480 (net)
Price for transport / packaging within Germany (excluding islands): €400 (net)
You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution!
A cantilever racking system, hot-dip galvanized, consisting of:
German brand manufacturer, new equipment
Description:
- Frame, single-sided, 2,600 mm high, hot-dip galvanized
- Base and arm depth: 800 mm
- Each frame fitted with 3 height-adjustable arms
- Load capacity with load center at 400 mm
Itsdpfx Ajnwmwvehnsp
- 750 kg per arm / 2,250 kg per upright
With 4 uprights per level: 4 x 750 kg = 3,000 kg
Profiles: frames (uprights): IPE 140, arms: IPE 80
Including longitudinal and diagonal bracing
Standard bay spacing between frames is 1.30m.
Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m.
For bay length from 1.50m and above, a small surcharge applies to the listed price.
Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time.
If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m.
In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m.
Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors.
Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly.
Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!
Available special accessories (at extra charge), see attached photos:
- Base section with impact protector
- Base section with large impact protector
- Base section with wheel guard
- Cantilever arm with impact protector
- Plug-in roll-off protection for cantilever arm
- Clamp-on roll-off protection
- Grating shelves
- Conversion for pallet storage use
Photos are for reference only and show typical single-sided rack examples and material used.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Price ex works, including loading!
Price: €1,480 (net)
Price for transport / packaging within Germany (excluding islands): €400 (net)
You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution!
A cantilever racking system, hot-dip galvanized, consisting of:
German brand manufacturer, new equipment
Description:
- Frame, single-sided, 2,600 mm high, hot-dip galvanized
- Base and arm depth: 800 mm
- Each frame fitted with 3 height-adjustable arms
- Load capacity with load center at 400 mm
Itsdpfx Ajnwmwvehnsp
- 750 kg per arm / 2,250 kg per upright
With 4 uprights per level: 4 x 750 kg = 3,000 kg
Profiles: frames (uprights): IPE 140, arms: IPE 80
Including longitudinal and diagonal bracing
Standard bay spacing between frames is 1.30m.
Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m.
For bay length from 1.50m and above, a small surcharge applies to the listed price.
Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time.
If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m.
In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m.
Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors.
Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly.
Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!
Available special accessories (at extra charge), see attached photos:
- Base section with impact protector
- Base section with large impact protector
- Base section with wheel guard
- Cantilever arm with impact protector
- Plug-in roll-off protection for cantilever arm
- Clamp-on roll-off protection
- Grating shelves
- Conversion for pallet storage use
Photos are for reference only and show typical single-sided rack examples and material used.
Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.
Kirim permintaan
Telepon & Faks
+49 6122 ... iklan
Iklan-iklan ini juga mungkin menarik bagi Anda.
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Bad Feilnbach
10.973 km
Rak tugas berat
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Kragarmregal einseitig Höhe: 4.200 mmNutztiefe: 1.200 mm / Länge: 4.000 mm
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Liverpool
11.824 km
Trencher / Notcher
GrauleQNF-90°
GrauleQNF-90°
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Bitburg
11.321 km
Pengelasan asap ekstraksi
SchweisskraftSRF Master
SchweisskraftSRF Master
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Bad Feilnbach
10.973 km
Rak kantilever
Kragarmregal doppelseitig Höhe 4.160 mmTiefe je Seite 1.200 mm / Länge 4.000 mm
Kragarmregal doppelseitig Höhe 4.160 mmTiefe je Seite 1.200 mm / Länge 4.000 mm
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Crailsheim
11.089 km
Derek
JMGMC 650S
JMGMC 650S
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Gerolzhofen
11.055 km
Mesin tenoning dan slotting
FestoZA 101
FestoZA 101
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Wien
10.646 km
Mesin cetak injeksi
KraussMaffei
KraussMaffei
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Burghaun
11.081 km
Forklift diesel
LindeH80D/900
LindeH80D/900
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Chmielów
10.248 km
Rak double sided STOW konsol
Stow
Stow
Berhasil
Pesan Anda telah dikirim.
Iklan kecil
Krauchenwies
11.173 km
Gergaji mitra Graule ZS200N
Graule Abläng und GehrungssägeZS 200N 5KW mit ESF 1
Graule Abläng und GehrungssägeZS 200N 5KW mit ESF 1
Iklan Anda telah berhasil dihapus
Terjadi kesalahan






































































