Beli Bruckkamp Kragarmregal bekas (61)

Kondisi: baru, Cantilever rack, single-sided, frame height 2.60m, arm depth 80cm, 750kg load per arm, hot-dip galvanized – new: Price ex works, including loading! Price: €1,480 (net) Price for transport / packaging within Germany (excluding islands): €400 (net) You may also create longer or shorter rack units by omitting or purchasing additional frames (or by choosing different bay widths). The example with 4 frames shown here is the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new equipment Pgjdpfenwmwvjx Al Iok Description: - Frame, single-sided, 2,600 mm high, hot-dip galvanized - Base and arm depth: 800 mm - Each frame fitted with 3 height-adjustable arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per level: 4 x 750 kg = 3,000 kg Profiles: frames (uprights): IPE 140, arms: IPE 80 Including longitudinal and diagonal bracing Standard bay spacing between frames is 1.30m. Other standard bay spacings available from stock: 1.0m / 1.25m / 1.50m / 1.70m / 1.90m. For bay length from 1.50m and above, a small surcharge applies to the listed price. Special dimensions (other bay spacings) are available upon request. These are custom-made, incur an extra charge, and have a longer lead time. If no alternative bay spacing is specified, racks will be supplied with a standard bay spacing of 1.30m. In this case, the total length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivery includes all bolts and nuts (shipped within Germany via parcel service directly from Würth), excluding floor anchors. Please note: If you install additional arms per upright, the specified maximum frame load must not be exceeded. The maximum usable load per arm will decrease accordingly. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us! Available special accessories (at extra charge), see attached photos: - Base section with impact protector - Base section with large impact protector - Base section with wheel guard - Cantilever arm with impact protector - Plug-in roll-off protection for cantilever arm - Clamp-on roll-off protection - Grating shelves - Conversion for pallet storage use Photos are for reference only and show typical single-sided rack examples and material used.

Kondisi: baru, Cantilever rack, new – H: 400 cm, base + 3 storage levels with roof & rear wall Delivery free to your door within Germany, excluding islands Technical data: - Height: approx. 400 cm - Depth: approx. 147 cm - Length: approx. 1,420 cm - Cantilever arms: approx. 125 cm - Axle spacing: 290 cm (can be adjusted as per customer requirements) - New product – made in Germany - Delivery time: approx. 6 weeks after commercial clarification - Load capacity: 1,000 kg per arm - Load capacity: 4,000 kg per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in a 200 mm grid - Levels: base + 3 storage levels (4 storage levels in total) Pjdpoy Hiu Rjfx Al Iegk Rack consists of: - 06 x uprights incl. base, approx. 400 cm, made of IPE 270 - 18 x cantilever arms approx. 125 cm, made of IPE 120 - 06 x roof beams approx. 150 cm, made of IPE 120, roof slope rising 5° - incl. material for roof and rear wall - incl. all necessary connecting elements and bolts Why BLT Cantilever Racks? - Certified German manufacturer, DIN EN 1090 – Made in Germany - All stated load capacities of uprights and arms are statically verifiable at 100% loading - All racking systems are supplied hot-dip galvanized. This allows set-up both indoors and outdoors, and they will not rust like painted systems—consistent appearance for years - We use legally prescribed hot-dip galvanized bolt sets according to DIN EN 15048-1 - Long-term availability of spare parts - The upright base and back are welded together for extra safety and reduced assembly time, as there is no need to bolt them together separately - Bracing made from angle steel, eliminating the need for turnbuckles; this reduces installation time - No slotted hole system—no weakening of the upright profile Price: €12,250 net plus statutory VAT. You will receive an invoice with VAT shown separately. Assembly: Our trained staff will gladly assist you with the professional assembly and dismantling of your facility if needed. Our recommendation: Let us know your requirements... We are happy to support you from planning, ordering, through to assembly.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW Specifications: - Height: approx. 350 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle distance: 131 cm - NEW equipment immediately available from stock - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights are hot-dip galvanized - Cantilever arms are hot-dip galvanized - Arms are bolted - Arms adjustable in 100 mm increments Pjdpfoy Hiu Dox Al Ijgk - Levels: Base + 3 storage levels (4 storage levels in total) The rack consists of: - 04 x uprights, incl. base, approx. 350 cm made of IPE160 - 12 x cantilever arms, approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and bolts Why choose BLT cantilever racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and cantilever arms are statically verifiable at 100% load - All racking systems are delivered hot-dip galvanized. Therefore, they can be installed indoors or outdoors and do not rust as painted systems do. Consistent appearance for many years. - We use legally prescribed hot-dip galvanized bolting systems according to DIN EN 15048-1 - Long-term repurchase guarantee - Upright foot and upright back are welded together, providing additional safety and short assembly times as the feet do not need to be bolted separately to the upright back - Bracing made of angle steel, so no adjustment using turnbuckles is necessary, shortening assembly time - No slotted hole system, thus no weakening of the upright profile Price: €2,356.00 net + legally applicable VAT You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged through our partner shipping company upon request; costs depend on postal code. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your facility as needed. Our recommendation: Let us know your requirements... We are happy to assist you in realizing your projects, from planning and ordering to assembly.

Kondisi: baru, Double-Sided Cantilever Rack, New Specifications: - Height: approx. 400 cm - Width: approx. 256 cm - Length: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle distance: approx. 131 cm - New stock direct from factory - Double-sided - 500 kg load capacity per arm - 2250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms bolted - Arms adjustable in 200 mm increments - Levels: base + 4 storage levels (5 storage levels total) - Delivery time approx. 4 weeks Rack includes: - 15 x double-sided uprights, incl. base, approx. 400 cm made from IPE160 - 120 x cantilever arms, approx. 120 cm, made from IPE80, without deflectors - Includes all necessary connectors and bolts Why BLT cantilever racking? - Certified German manufacturer per DIN EN 1090 – Made in Germany - All specified load capacities of the rack uprights and arms are statically verifiable at 100% load - All racking units are supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and resistant to rusting unlike painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term availability of replacement parts guaranteed Psdpfx Aloy Hiuko Iegk - Upright base and back are welded together for extra safety and reduced assembly times (no need to bolt base and back together) - Bracing made from angle steel eliminates the need for turnbuckles, thereby reducing assembly time - No slotted hole system, thus no weakening of the upright profile Price: €12,450 net, plus applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery can be arranged by our logistics partner upon request. Costs depend on the destination postal code. Assembly: Our trained staff are happy to assist with professional installation and dismantling of your warehouse equipment as needed. Our recommendation: Let us know your requirements... We are happy to help you realize your projects, from planning and ordering to final assembly.

Kondisi: baru, Tahun pembuatan: 2020, en Psdpfx Aley Hit Tj Iogk

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 140 kg, tinggi rak: 2.500 mm, panjang total: 3.150 mm, tinggi total: 2.500 mm, jarak gandar: 1.030 mm, kapasitas beban per penyangga: 1.120 kg, Approx. 3.15 linear meters cantilever racking with shelves, 60 cm deep, Height: 250 cm, 140 kg/arm, META Multistrong Specifications: - Height: approx. 250 cm - Depth: approx. 81 cm - Length: approx. 315 cm - Cantilever arms: approx. 60 cm - Axle spacing: 103 cm - NEW stock, available immediately - Load capacity: 140 kg per arm - Load capacity: 1120 kg per upright - Uprights finished in RAL5010 (gentian blue) - Cantilever arms finished in RAL5010 (gentian blue) - Arms are hooked in and secured with safety bolts - Arms adjustable in 70 mm increments - Levels: base + 4 storage levels (5 storage levels in total) Rack consists of: - 04 x uprights, incl. base, approx. 250 cm made of IPE120 - 16 x cantilever arms, approx. 60 cm, rectangular profile 40 x 30 mm - 12 x META shelf panels, approx. 100 x 60 cm - Includes all necessary connecting elements and screws -- Available Immediately -- Price: €1,765.00 net €2,100.35 gross You will receive an invoice with VAT shown separately. Pgsdpfxey Hitme Al Iek Accessories such as floor anchors, impact protection, etc. can also be purchased from us. Transport: Delivery available upon request via our partner freight forwarder. Costs depend on the delivery postcode. Assembly: Our trained staff are available to assist with the professional assembly and disassembly of your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with the realization of your projects, from planning to ordering and installation.

Kondisi: baru, Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, kapasitas angkut per lengan kantilever: 140 kg, tinggi rak: 2.500 mm, panjang total: 3.150 mm, lebar total: 810 mm, tinggi total: 2.500 mm, jarak gandar: 1.030 mm, kapasitas beban per penyangga: 560 kg, Approx. 3.15 linear meters Cantilever Rack H: 250 cm 140 kg/arm META Multistrong Specifications: - H: approx. 250 cm - D: approx. 81 cm - L: approx. 315 cm - Cantilever arms: approx. 60 cm - Axial dimension: 103 cm - BRAND NEW, immediately available from stock. - Load capacity per arm: 140 kg - Load capacity per upright: 1120 kg - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking pins. - Arms adjustable in 70 mm increments. - Levels: base + 4 storage levels (5 storage levels total) Podpfxjy Hitgo Al Ijgk The rack consists of: - 04 x uprights incl. base, approx. 250 cm, made from IPE120. - 16 x cantilever arms, approx. 60 cm, made from rectangular tube 40 x 30 mm. - Incl. all necessary connecting elements and bolts. -- Immediately Available -- Price: €1,525.00 net €1,814.75 gross You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. are also available from us. Shipping: Delivery can be arranged by our partner forwarding company upon request. Costs depend on postal code. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements ... We are happy to support you with your projects, from planning and ordering to installation.

Kondisi: baru, Tahun pembuatan: 2020, Cantilever Racking – Brand New Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Arm length: approx. 120 cm - Axle spacing: 131 cm - Brand new, available immediately from stock. - Load capacity: 500 kg per arm - Load capacity: 2,250 kg per upright - Uprights are hot-dip galvanized. - Cantilever arms are hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (total 4 storage levels) Racking consists of: - 4 x uprights incl. foot, approx. 416 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE 80 - Includes all necessary connecting elements and bolts. Why BLT Cantilever Racks? - Certified German manufacturer according to DIN EN 1090 – Made in Germany - All specified load capacities for uprights and arms are statically verified at 100% load. - All racking systems supplied in hot-dip galvanized finish, suitable for both indoor and outdoor installation, and will not rust like painted systems. Consistent appearance for many years. - We use legally required hot-dip galvanized fasteners per DIN EN 15048-1. - Long-term availability guarantee for spare parts. - Upright base and upright back are welded together for added safety and reduced assembly time, as the base does not need to be bolted separately. - Bracing made from angle steel – no adjustment via turnbuckles required, thus reducing assembly time. - No slotted hole system, so the upright profile is not weakened. Pgedjy Hitajpfx Al Iok Price: €2,578.00 net + statutory VAT. You will receive an invoice showing VAT. Accessories such as floor anchors, collision protection, etc. are also available from us. Transport: Delivery is available via our partner freight forwarder upon request, costs are based on postal code. Assembly: Our trained staff is available to assist you with the professional assembly and disassembly of your facility as needed. Our Recommendation: Tell us about your requirements... We are happy to support your projects – from planning and ordering to installation.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever racking NEW Specifications: - Height: approx. 300 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW immediately available from stock. - Load capacity: 500 kg per arm - Load capacity: 2250 kg per upright - Uprights hot-dip galvanized. - Cantilever arms hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels in total) Racking system consists of: - 04 x uprights, including base, approx. 300 cm from IPE160 - 12 x cantilever arms, approx. 120 cm from IPE 80 - Including all necessary connecting elements and bolts. Why choose BLT cantilever racking? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities of uprights and cantilever arms are statically verifiable at 100% load. - All racking systems are supplied in hot-dip galvanized finish. Suitable for both indoor and outdoor use; unlike painted systems, they do not rust. Consistent appearance for many years. - We use legally required hot-dip galvanized bolt sets according to DIN EN 15048-1. - Long-term repurchase guarantee. - Upright base and upright back are welded together for additional safety and reduced installation times, as feet do not need to be bolted to the upright back. - Bracing made from angle steel, eliminating the need for turnbuckle tensioning. This reduces assembly time. - No slotted hole system, thus no weakening of the upright profile. Price: €2,265.00 net Pjdjy Hir Nepfx Al Iogk + legally applicable VAT. You will receive an invoice with VAT shown separately. Transport: Delivery available on request by our partner carrier; costs depend on postcode. Assembly: Our trained staff are available to professionally assemble or dismantle your facility upon request. Our recommendation: Let us know your requirements... We are happy to assist you with your projects, from planning to ordering and assembly.

Kondisi: baru, The double-sided cantilever racking system from BLT, with a height of 315 cm, is ideally suited for the storage of medium-weight long goods such as profiles, pipes, and rods in the warehouse, workshop, or craft business. With an approximate shelf length of 5.12 m, a usable depth of around 80 cm, and a total of 5 levels per side including the base level, this cantilever rack provides clear and easily accessible storage locations for long and bulky goods on both sides. Each cantilever arm can bear up to 500 kg, with each upright carrying up to 1800 kg per side. The bolted cantilever arms with impact guards ensure robust, practical use in everyday operations. Made in Germany – Freight within Germany already included, plus VAT. Product details: - Rack type: Double-sided cantilever rack - Height: approx. 315 cm - Length: approx. 5.12 m - Total depth: approx. 174 cm - Bay width: approx. 128 cm - Cantilever arms: approx. 80 cm usable length (IPE80) Podpfxey Hirpj Al Iegk - Usable depth of base level: approx. 80 cm - Load per arm: max. 500 kg (with evenly distributed load) - Load per upright: max. 1800 kg per side (without base level, with evenly distributed load) - Levels per side: base + 4 storage levels (5 levels per side in total) - Design: Double-sided, bolted cantilever arms with impact guard - Upright profile: IPE140 - Cantilever arm profile: IPE80 - Colour finish: RAL 7016 - Manufacture: Made in Germany - Delivery: Freight within Germany included, plus VAT Scope of delivery: - 5 × uprights made from IPE140, height approx. 3150 mm - 40 × cantilever arms approx. 80 cm long, made from IPE80 - Incl. fastening materials - Incl. heavy-duty anchors for floor fixing Advantages of the BLT cantilever rack: - Ideal for storing medium-weight profiles, pipes, and bars - Double-sided design provides usable and easily accessible storage on both sides - Bolted cantilever arms with impact guard - 5 levels per side including base level for optimal use of storage capacity - Up to 500 kg load capacity per arm and up to 1800 kg per upright per side - Secure floor anchoring with supplied heavy-duty anchors - Made in Germany - Freight within Germany already included Delivery: - Freight within Germany already included - Delivery includes fastening materials - Secure floor anchoring with supplied heavy-duty anchors Enquiries & custom planning: Take advantage of our personal consultation service for your bespoke storage solution. Let us know your required dimensions, types of goods to be stored, and available space. Our experienced professional consultants will be happy to provide you with a non-binding offer including tailor-made planning and structural calculation for your custom cantilever rack system. Use our enquiry list or contact us directly by phone. Together, we will plan your bespoke racking solution.

Kondisi: baru, Tahun pembuatan: 2022, Cantilever Racking NEW STOCK Specifications: - Height: approx. 400 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm Pgsdsy Hirijpfx Al Iek - NEW STOCK available immediately from warehouse - 500 kg load capacity per arm - 2,250 kg load capacity per upright - Uprights hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms adjustable in 200 mm increments - Levels: base + 3 storage levels (4 storage levels total) Racking consists of: - 04 x uprights incl. base, approx. 400 cm, made from IPE160 - 12 x cantilever arms, approx. 120 cm, made from IPE 80 - Incl. all necessary connectors and bolts Why choose BLT cantilever racking? - Certified German manufacturer to DIN EN 1090 – Made in Germany - All stated load capacities for frames and arms are statically verified at 100% load - All racking systems are supplied as hot-dip galvanized units, suitable for indoor and outdoor use without rusting like painted systems. Consistent appearance for many years - We use legally required hot-dip galvanized bolt sets as per DIN EN 15048-1 - Long-term availability guarantee for replacements - Base plates and rear uprights are welded together for added safety and reduced assembly time—bases do not need to be bolted separately - Cross bracing made of angle steel, so no tensioning devices or turnbuckles are necessary, reducing assembly time - No slotted hole system, so the upright profile strength is not compromised Price: €2,462.00 net + statutory VAT You will receive an invoice with VAT shown. Transport: Delivery can be arranged upon request by our partner carrier; costs are dependent on postcode. Assembly: Our trained staff are available to assist with professional assembly and disassembly of your workplace equipment if required. Our recommendation: Let us know your requirements... We are happy to assist with your projects, from planning and ordering through to installation.

Kondisi: siap digunakan (bekas), CANTILEVER RACK DOUBLE-SIDED | HEIGHT 200 CM | 200 KG PER ARM This double-sided cantilever rack is ideally suited for storing lightweight long goods such as pipes, profiles, battens, laths, rails, and other bulky materials in warehouses, workshops, or craft businesses. With a height of approx. 200 cm and cantilever arms of approx. 50 cm, the rack provides clearly structured and easily accessible storage spaces on both sides. Thanks to 6 storage levels per side, including the base, it offers ample storage space while requiring minimal footprint. Each cantilever arm can support up to 200 kg. Its robust construction ensures reliable performance in everyday operations. FREE DELIVERY WITHIN GERMANY IS INCLUDED IN THE PRICE. PRODUCT DETAILS: - Rack type: double-sided cantilever rack - Total length of rack row: approx. 3.91 m - Overall height: approx. 2,000 mm - Usable arm depth: approx. 500 mm - Usable depth of base level: 525 mm - Total depth: 1,150 mm - Bay width (upright spacing): approx. 1,250 mm - Load capacity per arm: max. 200 kg (with even load distribution) - Load capacity per upright: max. 1,000 kg (with even load distribution) - Storage levels per side: base + 5 - Specification: double-sided, arms & anti-roll-off stops solidly welded - Colour finish: RAL 7016 (anthracite grey) - Connectors & bracing: galvanized SCOPE OF DELIVERY: - 04 x uprights incl. base sections made of IPE100, height approx. 2,000 mm - 40 x cantilever arms, approx. 50 cm long, made of RR 50x30x2 mm - Includes all bracing and required bolts - Includes heavy-duty anchors Price: €1,229.00 net incl. delivery. €1,462.51 gross incl. delivery. You will receive an invoice with VAT shown separately. Delivery included: Nationwide free delivery within Germany, excluding islands. Fast handling and prompt shipping upon receipt of order. INTERESTED OR HAVE QUESTIONS? Pgsdpfoy Hircex Al Iek Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Kondisi: baru, kapasitas angkut per lengan kantilever: 650 kg, tinggi rak: 4.000 mm, panjang total: 4.000 mm, lebar total: 1.480 mm, kapasitas beban per penyangga: 1.950 kg, EN-01 Pgodpfx Alsy Hiq Ss Isk

Kondisi: baru, Tahun pembuatan: 2020, Cantilever Racking NEW Specifications: - Height: approx. 416 cm - Depth: approx. 137 cm - Length: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle spacing: 131 cm - NEW stock, immediately available. - 750 kg load capacity per arm - 2250 kg load capacity per column - Columns hot-dip galvanized - Cantilever arms hot-dip galvanized - Arms are bolted - Arms height-adjustable in 100 mm increments - Levels: base + 3 storage levels (total 4 levels) Rack includes: - 04 x columns including base, approx. 416 cm, made of IPE160 - 12 x cantilever arms, approx. 120 cm, made of IPE100 - All necessary connecting elements and bolts included Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 – Made in Germany - All specified load capacities for rack columns and cantilever arms are statically verifiable at 100% load - All racks are supplied hot-dip galvanized, suitable for indoor and outdoor use, no corrosion as with painted systems, maintains appearance for many years - We use legally required hot-dip galvanized bolt sets in accordance with DIN EN 15048-1 - Long-term spare parts availability Pedpfxey Hiq Es Al Ijgk - Column base and column back are welded together, offering additional safety and reduced installation time, as the bases do not need to be bolted to the column back - Bracing made from angle steel, so no adjustment by turnbuckles is necessary, which reduces assembly time - No slotted hole system, so the column profile is not weakened Price: €2,631.00 net + VAT as applicable You will receive an invoice with VAT shown separately. Accessories such as floor anchors, collision protection, etc. can also be purchased from us. Our recommendation: Let us know your requirements... We are happy to assist you with your project, from planning and ordering to assembly. Delivery available at attractive rates upon request.

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, This single-sided heavy-duty cantilever rack is ideally suited for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden slats, and panel materials. With an overall length of approx. 13.20 m, a height of approx. 4.00 m, and cantilever arms of approx. 120 cm, the rack offers high storage capacity across a total of 4 storage levels (base level + 3 additional levels). Each arm supports up to 500 kg, and each upright can handle up to 2,250 kg. The cantilever arms are bolted and height-adjustable in 200 mm increments thanks to a perforated upright grid. The fully hot-dip galvanized finish ensures long-lasting protection for both indoor and outdoor use – new stock available ex works Wietmarschen. PRODUCT DETAILS: - Rack type: Single-sided heavy-duty cantilever rack Psdpfsy Hii Uex Al Ijgk - Total rack length: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing: approx. 131 cm - Levels: Base level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform load distribution) - Load capacity per upright: max. 2,250 kg (with uniform load distribution) - Upright profile: IPE 160, approx. 400 cm, incl. base - Upright perforation grid: approx. 20 cm - First hole above base: approx. 107.5 cm (top of base) - Top hole pair: approx. 50 cm below upright head (top of upright) - Design: single-sided, bolted arms - Surface: fully hot-dip galvanized - Availability: New / Grade 2 (returns) in stock at Wietmarschen SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm made of IPE 160, incl. base, 20 cm perforation grid - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Includes all connecting elements - Includes all required bolts - 1 x load capacity sign Price: €5,660.00 net €6,735.40 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery in Germany by our partner forwarding agents – freight costs depending on the postal code - Professional installation and removal by trained teams available on request - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide a non-binding offer tailored to your specific requirements. Whether it's new installation, conversion, or expansion – we offer expert advice for your racking configuration. Haven't found the right solution yet? Visit our website for a quick overview of many offers and product versions! INTERESTED OR HAVE QUESTIONS? Contact us via message or phone call. You can find our phone number on our company page. We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, leave us a message with your name and number, and we will get in touch with you as soon as possible.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack with roof beams: Hot-dip galvanized bolted system Scope of delivery: - 9 upright frames, height 4,230 mm with base section, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflector - 9 roof beams with 1,500 mm projection, pre-drilled for on-site roofing (*Excludes wooden purlins and trapezoidal sheets for roofing) - Including longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions can be ordered at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction using IPE profiles - All parts hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind and snow load (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof beams (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright fitted with 3 bolted cantilever arms, depth 1,200 mm, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing at 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable transport with advance delivery notification. Material is packaged efficiently for easy unloading. Pgodpfxjh R Taqo Al Iek The substrate must be concrete, level, suitable for dowelling, and able to absorb the applied loads. The customer is responsible for checking and ensuring ground conditions, load-bearing capacity, and any required official approvals. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to professional association guidelines, it is recommended that the uprights offer at least 500 mm projection above the top storage level.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2024, en1 Pgjdpfxjmhhypo Al Ijk

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack used: Bolt system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,500 mm with base 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay width - Fastening materials (bolts, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay width - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With installation instructions and C4 load signs according to DIN standard - Telephone expert advice - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchoring and able to bear the acting loads. Floor properties and load-bearing capacity as well as any required permits must be checked and ensured by the customer. Pgedpfx Aomhh Dhjl Iek The rack uprights must be anchored in the floor on-site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum stand-off of 500 mm to the upper edge of the upright on the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, usable depth 1,000 mm - 12 cantilever arms, usable depth 1,000 mm, standard - Including horizontal and diagonal braces for 1,300 mm bay distance - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions possible at any time) - (*Offer available in larger quantity: approx. 40 uprights in stock) Pgodemhh Dzjpfx Al Isk Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright as standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Includes horizontal and diagonal braces for 1,300 mm bay distance - Rack length = 4,000 mm - Including fasteners (without floor anchors) - With assembly instructions and C4 load capacity labels according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance notification prior to delivery. The material is sensibly packed to facilitate easy unloading. If installed outdoors, the load capacities are reduced due to wind and snow load. The subfloor must be concrete, level, and suitable for anchor fixing, and must support the applied loads. The floor condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither required nor recommended. According to professional association guidelines, the top storage level should have at least a 500 mm overhang above the top of the upright.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever racking: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay distance - Incl. mounting hardware (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and system can be expanded at any time) - (*Larger quantities available: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 2,600 mm Pgjdpjd Tbbdsfx Al Ijk - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Incl. mounting hardware (without floor anchors) - With assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notice. The material is packed sensibly to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The ground must be concrete, level, suitable for doweling, and capable of bearing the imposed loads. The customer is responsible for verifying and ensuring ground conditions, load capacity, and any necessary official permits. Uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that the uprights have at least a 500 mm upright top projection above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts reorder and extension possible at any time) - (*Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening hardware (without floor anchors) - Supplied with assembly instructions and C4 load signs in accordance with DIN standard - Professional telephone consultation Pgjdpfefdkb Tjx Al Isk - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We provide reliable shipping with advance notice prior to delivery. Goods are packed efficiently to allow for easy unloading. When installed outdoors, the load capacity is reduced to account for wind and snow loads. The floor must be concrete, level, and suitable for dowelling, and must be able to bear the imposed loads. The surface condition, load-bearing capacity, and any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site. Anchoring to the wall is not necessary or recommended. According to professional association guidelines, rack uprights should provide at least a 500 mm projection at the top storage level above the upright top.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Used cantilever rack: bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Includes horizontal and diagonal bracing for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension always possible) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Fastening material included (floor anchors not included) - Includes assembly instructions and C4 load labels according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - Local pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notification before delivery. Pgjdpfomhhx Isx Al Isk The material is carefully packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchors, and able to accommodate the acting loads. The customer is responsible for checking and ensuring the floor quality, load-bearing capacity, and for obtaining any required official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to German professional association recommendations, the rack uprights should have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm with base section, 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (floor anchors not included) - With assembly instructions and load labels C4 according to DIN standard - Technical telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freighting with pre-delivery notification. Materials are packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for anchoring, and able to absorb the acting loads. The customer is responsible for checking and ensuring the condition and load-bearing capacity of the subfloor as well as any permits required by authorities. Pgjdpfxemhhyao Al Ijk Rack uprights must be anchored to the ground on-site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that rack uprights have a minimum overhang of 500 mm above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany Psdpjh Ek Daefx Al Ijgk - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolted system, hot-dip galvanized finish Scope of delivery: - 4 rack uprights, height 3,000 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Fastening material (bolts, nuts, and washers) Pgedpfxjmhh Ans Al Ijk - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load signs according to DIN standards - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for doweling, and capable of bearing the applied loads. Floor condition and load capacity as well as any required official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to the trade association, it is recommended that the uppermost storage level has at least 500 mm clearance above the top edge of the upright.