Mesin meninju otomatis

BRUDERER BSTA30

Kondisi: bekas, Tahun pembuatan: 1982, Press force 30 t Stroke 8 - 40 mm Strokes per minute 100 - 600 /min Upright width 330 mm Installation height (stroke + ram adjustment at top) 280 mm Lateral upright passage 300 mm Table area 540 x 470 mm Through-hole in table 315 x 110 mm Table height above floor 1000 mm Ram area 250 mm Material width 120 mm Material thickness - 3.0 mm Feed length - 60 mm Drive power 5.5 kW Weight 2.6 t Space requirements approx. 1.5 x 1.2 x 2.2 m (LxWxH) Approved for automatic operation in accordance with German accident prevention regulations (UVV) with infinitely variable drive, pneumatic clutch, manual stroke adjustment, manual ram adjustment, fixed table, mechanical roller feeder (Bruderer BBV 120/60) Table area 540 x 300 mm or 330 x 390 mm Psdjvuk Hropfx Ab Ierd As is, where is, WITHOUT being put into operation

Kondisi: baru, Tahun pembuatan: 2024, Tunneltyp-Teilereinigungsanlage für Metall- und Kunststoffteile. Einsatz in diversen Branchen wie Automobilindustrie, Lebensmittelindustrie, Metallbearbeitung, Blechverarbeitung, Kunststoffbehälter usw. Funktionsprinzip Das Werkstück gelangt über ein Bandförderer-System in den Reinigungstunnel; durch gezielt platzierte Düsen werden sämtliche Bereiche des Werkstücks gereinigt. Während das Werkstück den Tunnel durchläuft, wird es kontinuierlich mit einem Gemisch aus erhitztem Wasser und Reinigungschemikalien unter Druck gewaschen. Dabei werden sämtliche Öle, Späne und sonstige industrielle Verunreinigungen von der Oberfläche entfernt. Tunnelwaschanlagen werden sowohl standardisiert als auch individuell anwendungsspezifisch von der INTERSONIK-Ingenieurabteilung konzipiert. Ablauf des Reinigungsprozesses Waschen, Passivieren und Trocknen werden von den Intersonik-Prozessingenieuren exakt entsprechend der gewünschten Ergebnisse mit umweltfreundlichen Intersonik-Chemikalien entwickelt. Betriebsablauf ► Vorwäsche ► Hauptwäsche ► Spülung ► Passivierung ► Trocknung Prodpfx Aed I Azveb Iod Anwendungsbereiche ► Automobilindustrie ► Wehrtechnik ► Lebensmittelindustrie ► Für alle Fertigungsindustrien bei Serienfertigung und Wartungszwecken ► Metallmöbelindustrie Das Förderbandsystem wird von INTERSONIK speziell nach Ihren Anforderungen und Werkstücken konstruiert und gefertigt. Förderbandgeschwindigkeit ist einstellbar. Automatisches Flüssigkeitsnachfüllen ist Standard. Elektrische Beheizung ist Standard, Wärmetauscher- und Brennerbeheizung sind optional. Alle Betriebsdaten können über Digitalanzeigen eingesehen und gesteuert werden. SPS-Steuerung ist optional verfügbar. Alle Flüssigkeitstanks sind wärmeisoliert. Absaug- und Nebelabscheideeinheit sind standardmäßig integriert. Für weitere Optionen und Details stehen wir Ihnen gern zur Verfügung. Tunnelwäsche, automatische Teilewaschanlage, Kfz-Teilereinigung, Metallreinigung, Teilereiniger, Entfettung, Spritzreinigung, Druckwaschmaschine

Kondisi: baik (bekas), Technical Data Pedpfxjxu T Eys Ab Iord Pressing force: 30 t Stroke rate: 100 – 600 mm Ram stroke, adjustable: 8 – 40 mm Installation height: 200 mm Various coil reels in stock up to 300 kg. Ongoing purchase of German used machines without NC or CNC control.

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5136, Pressing force: 30 t Adjustable ram stroke: 16 - 40 mm Ram adjustment: 40 mm Shut height (stroke down, adjustment up): 230 +/- 20 mm Distance between uprights (sideways): 170 mm Table clamping surface approx.: 480 x 450 mm Ram clamping surface approx.: 250 mm Strokes per minute: 100 - 600 min-1 Power requirement: 5.5 kW Prsdpjuqd Rrsfx Ab Iod Dimensions LxWxH: 2,150 x 1,200 x 1,160 mm Machine weight approx.: 2.5 t Standard equipment Roll feed, feed length 20 - 100 mm, conventional press control by Bruderer Additional equipment Second roll feed at table outlet, vibration dampers (4x), various adapter plates for the ram, Raziol coil lubrication, Vester tool safety device Automation Roll feed BBV 120/60

Kondisi: baru, DM1100 2C – Edge Rounding Machine for Laser, Plasma, and Punched Parts. NEW DESIGN – UNDER POWER FOR INSPECTION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds both the upper and lower edges of metal parts, starting from a minimum size of 150 mm up to a length of 1100 mm, all IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above also using two counter-rotating cross belts. Thanks to these cross belts, both internal and external edges of the parts are rounded. Sharp edges on steel, stainless steel, and aluminum parts—produced by laser, punch presses, or shearing processes—are removed effectively. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another key advantage of the DM1100 2C is its capability to process small parts from 50 mm onwards. By folding up a table, the rotation direction of the upper conveyor belt is automatically reversed, and the gap of the first processing station is bridged, so that parts go directly into the second station. This means small parts sized from 50 mm up to 150 mm can then be processed on one side only. An additional positive feature of this machine is its ability to round parts with protective surface film without damaging the film. Simple, tool-free cross belt change. Programmed automatic positioning of the upper and lower belts for optimal accessibility and reduced changeover times. Effortless operation via integrated touchscreen. This machine is, of course, also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100x50 Number of cross belt stations: 2 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Prjdpfod Ev Upsx Ab Iod Cross belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560x1980x2150 Weight (kg): 2210

Tahun pembuatan: 1975, Kondisi: siap digunakan (bekas), Max. pressing force: 30 t, Stroke rate: 100–600/min, Adjustable stroke: 8–40 mm, Length: 1200 mm, Width: 1160 mm, Height: 2150 mm, Weight: 2.5 t. Prsdpfx Ajht Hddeb Ijd

Kondisi: bekas, Tahun pembuatan: 1979, nomor mesin/kendaraan: 5255, Press force: 30 t Strokes per minute: 100-600 spm Sheet width: 120 mm Table size: 540 x 450 mm BRUDERER precision double-roll feeder: left-hand side Adjustable stroke: 16-40 mm Pjdpocxxu Nofx Ab Isrd Distance between columns: 330 x 300 mm Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, equipped with air cooler, stroke counter, separate control cabinet, pneumatic clutch, left-hand BRUDERER precision double-roll feeder.

Kondisi: bekas, Tahun pembuatan: 1998, nomor mesin/kendaraan: 10870, Pressing force: 50 t Adjustable ram stroke: 16 - 51 mm Ram adjustment: 64 mm Distance between uprights (L-R): 1100 mm Distance between uprights (sideways): 250 mm Table clamping surface approx.: 1080 x 650 mm Ram clamping surface approx.: 980 x 420 mm Throughhole in table: 1060 x 200 mm Psdpfx Aeuqd Absb Ijrd Strokes per minute: 100 - 750 min-1 Power requirement: 22 kW Machine operating hours: 16,850 h Overall dimensions (L x W x H) approx.: 2471 x 1278 x 3150 mm Machine weight approx.: 9 t Standard equipment BRUDERER precision roller feed BBV 205 / 120

Kondisi: siap digunakan (bekas), Max. pressing force: 30 t, Stroke rate: 100–600/min, Adjustable stroke: 8–40 mm, Length: 1200 mm, Width: 1160 mm, Height: 2150 mm, Weight: 2.5 t. Prodpeht Hdwefx Ab Ijd

Kondisi: bekas, nomor mesin/kendaraan: 632/6, Pressure: 30 t Stroke rate: 100-600 strokes/min Sheet width: 120 mm Prjdpfx Abecxxyco Iod Table size: 480 x 450 mm Bruderer precision double roll feed: left Adjustable stroke range: 16-40 mm Distance between columns: 330 x 300 mm Space requirement approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in three-column design, air clutch, BRUDERER precision double roll feed on the left

Kondisi: baru, DM100 ZC - performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal components ranging in size from 50 x 50 mm up to 1100 x 100 mm. Podpfx Aod Hinteb Ierd The first station processes the products using a contact roller (approx. 55° Shore) with an abrasive belt and removes heavy burrs in the initial step. The second station is equipped with 2 counter-rotating cross belts with abrasive blocks and rounds the edges of the entire product, both inside and outside, in a second step. A major advantage is deburring products with surface protection foil, as only the edges are processed without damaging the foil. Technical Data – DM1100 ZC: Working capacity (Ø mm): 1100x100 Number of belt stations (Z): 1 Number of cross-belt stations: 1 Abrasive belt dimensions (mm): 1100x2200 Abrasive belt speed (m/s): 10 Cross-belt speed (m/s): 8 Feed speed (m/s): 0.9–13 Abrasive belt motor per head (kW): 18.5 Cross-belt motor (kW): (2x) 3 Feed motor (kW): 0.37 Total power (kW): 26.22 Current consumption (A): 55 Dust extraction connection per head (Ø mm): (2x) 150 Dimensions (mm): 2230x2300x2250 Weight (kg): 3300

Kondisi: siap digunakan (bekas), Max. pressing force: 30 t, Stroke rate: 100–600 strokes/min, Adjustable stroke: 8–40 mm, Length: 1200 mm, Width: 1160 mm, Height: 2150 mm, Weight: 2.5 t. Pedpjht Hdhjfx Ab Ierd

Kondisi: bekas, nomor mesin/kendaraan: 8483, Pressure: 30 t Strokes per minute: 100-600 spm Sheet width: 115 mm Table size: 450x450 mm Bruderer precision double roll feed: BBV 190/85 left Adjustable stroke range: 16-40 mm Column spacing (left-right): 330 mm Column spacing (front-back): 280 mm Shut height: 290 mm Prodpfx Ajcxxrdjb Isd Entry width: 120 mm Feed length: 15-80 mm Control cabinet dimensions: 1.1 x 1.2 x 2.2 m Pass-through opening in table: 315 x 100 mm Total connected load: 5.5 kW Approx. machine weight: 3 t High-speed punching press in 3-column design, equipped with BRUDERER BBV 190-85 feeder on the left, cooling fan, swivel safety guard, pneumatic clutch, electric two-hand operation, manual roller venting on the feeder.

Kondisi: bekas, Tahun pembuatan: 2011, A well-maintained EMAG laser welding system with EMAG ultrasonic testing unit, including a ROFIN laser, model: DC 060, year of manufacture 2009. Extraction system not included. The system was used for welding gears with clutch rings, diameter 60–80 mm, weld seam depth 4–6 mm. Pjdpfxoixxqke Ab Ijrd

Tahun pembuatan: 1974, Kondisi: siap digunakan (bekas), Max. pressing force: 30 t, Stroke rate: 100–600/min, Adjustable stroke: 8–40 mm, Length: 1200 mm, Width: 1160 mm, Height: 2150 mm, Weight: 2.5 t. Prjdpfx Aoht Hdtsb Ijd