Press rangka

Casolin Junior

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, de Fpedpfx Abownx Agshec

Kondisi: bekas, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control system: Yes Weight: 3300 kg Dimensions (L/W/H): 2600 x 920 x 1890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine with top/bottom disc unit Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, e.g. window scantlings etc. Robust premium design with innovative features. Suitable for high-duty cycles even with higher material removal rates. - Consecutively arranged sanding units for pre-sanding, fine sanding, and finish sanding, each from above and below 1st belt sanding unit with heavy-duty steel roller 2nd belt sanding unit with rubber-coated roller and shoe 3rd finishing unit with fiber brush (see special accessories below) - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free, wear-free CERMET-coated sanding shoes with excellent thermal conductivity and dimensional stability - External cooling of the sanding zones for cooler grinding and longer belt life - Forced pneumatic controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Dust extraction for airborne dust at tension rollers - Integrated brushing and finishing units with large dust extraction device - Motorized sanding thickness adjustment via precision ball screws and generously dimensioned linear ball bearings on hardened and ground precision shafts with dust and dirt protection - Material removal setting below via precision spindle with scale ring display (resolution 0.1 mm) - Sanding belt tensioning via pneumatic cylinder with constant tension pressure - Quick sanding belt change via pneumatic belt release in seconds - Adjustable sanding belt tracking during belt change - Electro-pneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated, non-slip and adhesive transport belts over heavy cast tables with finely planed surface and spring-loaded pressure rollers with fine adjustment - Universal joint drive shaft for smooth, even workpiece transport - Feed gear motor with stepless speed control, 4–20 m/min - All motors electrically protected - Ergonomically arranged control elements - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: Fjdpfevu Hgbex Abhepc - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm, 0.37 kW each - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with soft disc 2,740 mm): 2,600 mm - Length with control panel (with soft disc 3,035 mm): 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air jet for 4-belt system via nozzles directly at the radii ...

Kondisi: bekas, Number of sanding units: 4 units Sanding width: 190 mm Maximum sanding height: 4-180 mm Weight: 4,200 kg Hess Expert 4-Belt Single-Piece Wood Sanding Machine - Sanding from below/above - Each with two staggered sanding units (top and bottom) - Sanding units (top and bottom) arranged sequentially according to the planing principle - Pre-sanding with coarse grit (calibrating) - Fine sanding with fine grit (finishing) - Central motorized height adjustment of the lower sanding units - Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including upper transport units - Oscillating belt use (during the sanding process) - Absolute power transmission through 5.5 kW motors and large-diameter drive drums - Oxide-ceramic sanding shoe for - Precise surface geometry - No re-adjustment required - Permanent dimensional accuracy - Completely maintenance and wear-free Fedet Tqy Ejpfx Abhspc Basic design: Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration dampening. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction system for direct and airborne dust with sealing brushes and integrated sanding belt blow-off device, extending the sanding belts' service life. Sanding units in heavy-duty steel plate construction as the basic foundation for vibration-dampened, smooth belt tracking. Absolutely backlash-free guides as ball linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded guide carriages. Permanent precision ensured by dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers as contact rollers. Contact rollers and sanding shoes in a balanced ratio to the sanding belt grain load. The large-diameter drive drums guarantee full transmission of the 5.5 kW drive power from the sanding motors to the sanding belt. Therefore, slip-free, stable operation and optimal heat dissipation. Enables the strongest stock removal possible. Automatic machine stop triggered in case of belt breakage. Optical display on the control panel and via flashing light on the machine. Finish sanding shoes are completely maintenance and wear-free, made from oxide-ceramic with optimal heat dissipation. Sanding belt tensioning via appropriately dimensioned pressure springs. Sanding belt release for belt changes via a pneumatic device for sensitive, distortion-free application of new belts. The upper sanding unit and brushing device are centrally motorized and height adjustable with digital display on the control panel for motorized sanding thickness adjustment. Brushing and finishing device, for improved surface finish, integrated into the main machine. Two special brush rollers, 150 mm diameter, arranged one above the other and operating in the direction of feed. Separate height adjustment of the brush rollers on precise guided carriages for wear compensation. Additional transport roller for removal or further transport of the workpiece from the sanding machine, coupled with the conveyor belt. Wood guide in the infeed area for hard, double-sided...

Kondisi: baru, 8 sanding units Sanding width: 180 (260) mm Maximum sanding height: 160 mm Dimensions (L x W x H): 3065 x 1600 x 1900 mm Machine weight approx. 1500 kg LÖWER-Leistomat SD ----- Automatic fine sanding machine for wood sanding (surface smoothing, de-nibbing, and edge rounding) or intermediate sanding of profiled window bars. Equipped with Softdisc technology for visible surfaces, as well as automatic profile and width adjustment. - 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm Fsdpfx Abovnv Uhjhepc 1 top-mounted softdisc unit Ø=200 mm, 0.75 kW 1 top-mounted flap wheel unit L=200 mm, 0.75 kW 1 bottom-mounted softdisc unit Ø=200 mm, 0.75 kW 1 bottom-mounted flap wheel unit L=200 mm, 0.75 kW 2 side-mounted flap wheel units, each 0.75 kW, L=120 mm, D=200 mm - Linear guidance of all sanding units via linear ball bearing sets on hardened shafts - Time-controlled plunging of all flap wheel units directly above the incoming workpiece edges. Plunging allows deeper setting of units into the profiles. - Motorized workpiece thickness adjustment - Variable sanding flap speed via frequency converters for adaptable sanding intensity (separate control for discs, surface wheels, and side wheels) - Disc units as Softdisc with Velcro fastening for sanding discs (wood sanding) - Feed via three lower and one upper conveyor belts, plus spring-loaded pressure rollers with infinitely variable speed of 4–15 m/min - Touch panel settings: workpiece thickness, workpiece width (individual setting for left side units), plunge depth of side units, spindle speed, feed speed - Parameters can be saved as machine programs in program mode - Operation in automatic mode with contactless workpiece width and profile detection, and automatic adjustment of sanding units to workpiece width and profile shape (workpiece height is preset) - Pneumatically controlled driven infeed roller, automatic clamping of the workpiece, and start of feed after unit adjustment - Red/green status lights to indicate operational readiness - Minimum workpiece length: 380 mm - Conveyor belt width: 200 mm - Maximum workpiece width: 180 mm (260 mm with flip operation) - Workpiece height: 12–160 mm - Extraction connections: 4 x 100 mm and 2 x 80 mm diameter - Sensor-controlled tool air blast directly at the discs - Housing dimensions (L x W x H): 3065 x 1600 x 1900 mm - Total length: 4365 mm (including roller table with integrated workpiece width detection) - Weight: 1500 kg - Operating voltage: 400V, 50Hz, 3-phase, air connection 6 bar - CE compliant ----- Price for the above machine: on request! ----- Special accessories (with additional cost): Set of replacement flaps for Leistomat SD-200, consisting of: Surface units: 30 Strips EH45/200 - 7 (rollers) 30 Strips EH45/200 - 20 (rollers) Rabbet units: 96 Strips M55/120 - 4 SmartFlex flap disc Ø200 solid, with 30 grooves, 50 mm long Set of replacement flaps for SmartFlex flap disc, consisting of: 60 Strips M35/50 K 180-7 S Sanding paper disc VB for Softdisc, D=200 mm, grit 220, with Velour backing (Velcro), pack of 100 pieces Sanding paper disc VB for Softdisc, D=200 mm, grit 280, with Velour backing (Velcro), pack of 100 pieces ----- ...

Kondisi: siap digunakan (bekas), Technische Daten 5 Achsen Maximale Werkstücklänge (einspännig): 6000 mm, Pendelbetrieb: 2375 mm Maximale Werkstückbreite hinten: 1300 mm Maximale Werkstückdicke: 300 mm (inkl. Spannvorrichtung) Konsolen mit Frontanschlag: 10 Stück Saugerhöhe 100 mm für die Unterseitenbearbeitung Vakuumpumpe: 2 x 100 m3/h Windows-Steuerungssystem Betriebssystem: Windows XP 17" TFT-Flachbildschirm WOODWOP-Programmiersoftware Grafische Darstellung der Spannstationen Moderne 3D-Grafik-Oberflächen-Software Fernwartung (Remote-Diagnose) Betriebsspannung: 400 V, 50/60 Hz Steuerschrank rechts oder links platzierbar 5-Achs-Hauptspindel: 15 kW Antrieb HSK F63 Werkzeugaufnahme Flüssigkeitskühlung Elektronisch steuerbarer Drehzahlbereich: 1.000 – 24.000 min⁻¹ Maximale Werkzeuglänge: 230 mm Fsdpst Ttn Eefx Abhepc Werkzeugdurchmesser: max. 180 mm für Fräswerkzeuge Maximal 350 mm für Sägeblattbetrieb Z-Achsenhub: 750 mm Vibrationssensor zur Spindelüberwachung während der Bearbeitung Scheiben-Werkzeugwechsler: 18 Plätze für D=130 Fräswerkzeuge HSK F63 Ablageplatz für Sägeblatt 350 mm Bohraggregat mit 25 Spindeln (19 vertikal, 2+4 horizontal, Nutfräser) Laserprojektion zur Positionierung der Saugerriegel und Anzeige der zu fräsenden Kontur (Programmierung in WOODWOP) Späneförderband Leistung und Motoren Spannung: 400 V Anschluss: Drehstrom Abmessungen (gesamt): Länge: 9.500 mm Breite: 5.000 mm Höhe: 3.450 mm

Kondisi: bekas, Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, hentian panjang: 3.200 mm, diameter alat: 400 mm, diameter spindel: 50 mm, langkah spindel: 640 mm, kecepatan spindel (maks.): 3.000 rpm, panjang spindle milling: 320 mm, diameter mata gergaji: 400 mm, jenis penyesuaian ketinggian: listrik, jenis arus masuk: AC (pendingin udara), tinggi kerja: 130 mm, lebar kerja: 200 mm, SCM Windor 60/100 – Angle Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Description of the System The subject system is a window and door production line, type Windor 60/100 by SCM Group, year of manufacture 2005. This is a CNC-controlled angle processing centre for industrial machining of frame and sash components. The system is designed for series production and enables precise, repeatable processing in integrated process steps. 2. Main Components of the System 2.1 Angle Processing Centre SCM Windor 60/100 The SCM Windor 60/100 is of modular construction and designed as an angle machining unit. Machining is carried out on a tenoning side and a profiling side, arranged at right angles to each other. The system combines several machining steps such as milling, drilling, grooving, rebating, and tenoning in a continuous, CNC-controlled process. Key features: * CNC multi-sided machining * Several milling and machining spindles * Automated tool guidance and tool change * High dimensional and repeat accuracy 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the production line and provides precise drilling operations for joints and fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile-forming milling operations and consists of two machining sides: Right side: * Lifting spindle with height adjustment * Suitable for variable profile and contour machining Fpodpfxsx Nqqxo Abhjc Left side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling 2.4 Löwer Wide-Belt Sander A wide-belt sander from Löwer is integrated into the production line. The machine is solely used for surface sanding to improve the surface quality of the processed components. 3. Control, Operation, and Safety The system is equipped with CNC control, managing all machining operations, tool changes, as well as feed and spindle movements. Operation is semi-automated or fully automated by trained personnel. The safety equipment corresponds to the state of the art at the time of installation (year of manufacture 2005) and includes in particular: * Mechanical safety devices and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Extension: SCM Topset XL Planer (10-spindle) To expand the existing machinery, the installation of an SCM Topset XL planer with 10 spindles is planned. The machine will be operated as an independent processing station at a separate location within the production hall and will not be integrated into the Windor system’s CNC control. The system is available and can be dismantled at any time. Dismantling and transport must be organised by the purchaser. Available from: 07/01/2026

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 11513, Mesin penggiling suku cadang dengan 8 unit penggiling Fodpfx Absyba Snehepc

Tahun pembuatan: 2014, Kondisi: bekas, de-to-hu-it-lt-001 Fpsdpfxex Dng De Abhoc

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, GMF Caliper Complete Set 2,500 mm / 3,000 mm / 4,000 mm 1.) Base length: 1,500 mm or 2,000 mm 2.) Plus extension: 1,000 mm, 1,500 mm, or 2,000 mm Includes charger and receiver. The durable aluminum measuring rail is ideal for measuring glazing beads. How it works For use on doors and large window sashes, the GMF caliper can be safely and quickly extended mechanically up to a measuring length of 4,000 mm. - Automatic extension detection Accuracy: ± 0.1 mm Resolution: 0.02 mm Wireless data transmission to controller or PC Fpodexu Hyqepfx Abhoc Microcontroller-based battery charger, 100–240 V input voltage, and power adapter for Euro/UK/US/AUS NOTE: 1.) HECHT receiver software required on user’s PC – available separately upon request. 2.) Can be retrofitted to HECHT Exenso Comfort length stops manufactured from 2016 onwards – available separately upon request. 3.) Can be retrofitted to HECHT DS350 double miter saws from model year 2018 onwards – available separately upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 400 mm, lebar penggilingan: 400 mm, jenis penyesuaian ketinggian: listrik, panjang sabuk penggiling: 1.900 mm, lebar sabuk penghalus: 455 mm, lebar benda kerja (maks.): 400 mm, Mesin penghalus kayu lis / Mesin pengampelas parket Produsen: VG Machines Tipe: F/G 455 2 KS / 2KS Tahun pembuatan: 2018 Mesin berasal dari pabrik parket Desain lini / mesin inline (bagian atas dapat digerakkan) untuk kalibrasi dan pengampelasan dari bawah dan atas dalam satu proses Lebar kerja sekitar 400 mm Dilengkapi dengan: 1x roller kalibrasi dari atas, sekitar 11 kW 1x sepatu pengampelas dari atas, 5,5 kW 1x roller kalibrasi dari bawah, sekitar 7,5 kW 1x sepatu pengampelas dari bawah, 5,5 kW Ukuran sabuk amplas: 455 x 1900 mm Kecepatan pengumpanan variabel, maks. 16 m/menit, motor sekitar 2,2 kW Tegangan: 400 V Total daya terpasang: sekitar 34 kW Fsdexrk Tijpfx Abhspc Dimensi sekitar 3350 x 1600 x 2400 mm (tinggi dengan nozzle ekstraksi) Berat: sekitar 4800 kg