Mesin frais tipe ranjang

Correa BRAVA-30

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, jenis pendinginan: air, EN_FRONIUS TPS 5000 ✅ Scope of delivery: ➤ Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 ➤ Fronius VR 4000 wire feed unit ➤ Fronius intermediate hose package standard from 1.5m ➤ Fronius trolley ➤ Fronius torch package ➤ Ground cable 3-4m ➤ Pressure regulator With this device, almost all materials can be welded, including aluminium, steel, and stainless steel (V2A). It is equipped with filler wire programs and is also suitable for MIG brazing (CuSi), which is commonly used in the bodywork industry. Ffodowbh Ifspfx Aagew Additional options and applications: This TPS series can easily be connected to a robot. You only need an interface and the corresponding hose package for integration. Optionally, we offer the RCU 5000i control panel, which allows you to create and import characteristic curves, further extending the functions of the TPS unit. ----- IMMEDIATELY AVAILABLE PROPER INVOICE An inspection is possible in Vienna 1230, Austria! ✔ Insured pallet shipping is not a problem! ✔ ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►►What is the condition of the device? For your information, we purchase used equipment in almost-new condition, disassemble them, check everything thoroughly, replace wear parts if necessary, and only release them for sale after successful test welding. "All" devices are clean and have neither burn marks on the displays nor countless burn holes or dents on the machine! You are buying an item from us that is presentable and does not look worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice for intra-community supply within the EU, provided the relevant requirements are met. ►►►What payment options are available? Prepayment or cash on personal pickup ►►►Is insured shipping possible? Yes, we are happy to send your purchased set well-packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at a third of the new price and unfortunately do not have the leeway to offer a warranty. However, the devices can be tested on-site and paid for in cash. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other manufacturers! We know these units inside out and do not sell anything we are not familiar with.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.500 mm, jarak gerak sumbu Z: 1.500 mm, kecepatan spindel (maks.): 6.000 rpm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL MAIN DATA Year of manufacture: 2020 Capacities / Travel paths: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping area NC rotary table: Indexing plate: 2,400 x 1,900 mm Max. transport load (with centered load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: Approx. 2,900 mm Paint finish: RAL 7024 graphite grey Ffjdsygiwqjpfx Aagjw RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Retaining bolt: DIN 69872 Type A Main spindle drive: Motor / Manufacturer main spindle drive: Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed regulation/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: - Low range: 0-738 rpm - Medium range: 739-1,842 rpm - High range: 1,843-6,000 rpm Axis drives/feed: Axis drive motors: Manufacturer Heidenhain (digital drives) Rapid traverse max.: X, Y, Z axes: 25,000 mm/min Working feed max.: X, Y, Z axes: 15,000 mm/min Maximum average acceleration: 2 m/s² Max. feed force: X, Y, Z axes: 26,000 N Axis drive systems: X-axis (longitudinal): Preloaded ball screw Ø 63 x 40 Z-axis (vertical): Preloaded ball screw Ø 63 x 20 Y-axis (cross): Preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal): 6 pcs INA RUE 55 EL Z-axis (vertical): 4 pcs INA RUE 65 EL Y-axis (cross): 8 pcs INA RUE 55 E-HL and additional damping unit Clamping table / Table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch of outer slots 1800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 stations Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system upgraded to 37 bar through spindle Special operating mode 4 RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this series are sourced through a strict selection process and undergo a thorough examination (deep-dive check). After intensive cleaning, any detected obvious defects and faults are professionally repaired by our expert service team.

Kondisi: baik (bekas), Tahun pembuatan: 2007, Raddurchmesser - max. 400 mm Radbreite 250 mm Modul - max. 8 Modul - min. 0,5 Fußkreisdurchmesser 10 mm Zähnezahl 5 - 999 Schrägungswinkel - max. +/- 45 ° Gewicht 12.5 t Mit Hoffmann Filteranlage: Baujahr 2006 Filter Nr. 05919 - Typ HSF 100 SEK • Schleifscheibenflansch • 1 Schleifscheibe • 1 Original Abrichtgerat Ffedpfxoyclrpe Aagsw • 1 Satz abrichtscheiben • 1 Sensor -> Sehr guter Zustand, nur 22.500 Betriebsstunden

Kondisi: siap digunakan (bekas), tinggi total: 3.300 mm, lebar total: 3.450 mm, panjang total: 6.000 mm, produsen pengendali: Siemens, berat kosong: 17.000 kg, Model: FTV 850 Pendinginan melalui spindle Area kerja dapat dibagi menjadi dua bagian Ffsdpfx Aaswxz D Uogow 2 meja magnetik Kolom bergerak, mirip dengan Mazak VTC / Unisign / Hedelius Struktur sasis berat Gerak longitudinal sumbu X: 1800 mm Perjalanan silang sumbu Y: 850 mm Gerak sumbu Z (Tinggi): 800 mm Dimensi area penjepitan - meja: 2300 x 900 mm Universal (2x 360°): ISO 50 Kepala bor (1 x 90°): 19 kW

Kondisi: bekas, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact processing center for deburring, deslagging, derusting, oxide layer removal, edge rounding, fine grinding up to polishing of metal surfaces. This machine is suitable for heavy-duty applications. With a fixed working height, the machine can be optimally integrated into a production line and is suitable for processing large parts. Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belt with abrasive belt length: 3250 mm Standard with vacuum holding system, optionally with magnetic holding system By using abrasive belts with a length of 3250 mm, you achieve a consistently smooth surface and reduce consumable costs, as these belts offer a longer service life. The modular design of these machines allows for the optimal configuration according to the customer’s processing requirements. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, combined with advanced mechanics and electronics, make this series a universal processing center for deburring and finishing applications. Please contact us for further information and images via mail(at) or Fodpfx Aonah Taeagofw *

Tahun pembuatan: 2015, Kondisi: sangat baik (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 2007, 1 Ffsdpfxsu A Dn No Aagjw

Tahun pembuatan: 2012, Kondisi: baik (bekas), de-Muratec MW120 GT zu verkaufen Gebraucht, in ausgezeichnetem Zustand. Fedpfx Aaoifi D Tegofw Die Maschine kann nach Terminvereinbarung besichtigt werden. Der Transport liegt in der Verantwortung des Kunden, wir können jedoch bei Bedarf beim Verpacken und Verladen behilflich sein. Lieferung: EXW Székesfehérvár

Kondisi: bekas, Tahun pembuatan: 1990, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 07-16 1990, jarak pergerakan sumbu X: 2.000 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 800 mm, Dijual mesin dalam kondisi baik seperti terlihat di gambar, diproduksi tahun 1990 dan dilengkapi dengan kontrol NCT 90. Mesin ini sangat jarang digunakan dan dijual karena kurang dimanfaatkan. Berat total mesin adalah 33 ton. Mesin sepenuhnya berfungsi. Pembongkaran dan pengiriman menjadi tanggung jawab pembeli. Fjdpfxsw Sx Ago Aagefw

Kondisi: baru, Tahun pembuatan: 2026, The TYTAN CENTER 750 Vario turning-milling machine is a combination of two machines, offering user convenience and space savings in the workshop. It features stepless spindle speed adjustment for both lathe and milling functions. Turning: 250x750mm, 0.75 kW/230V + Milling: 0.6 kW/230V. The machine performs turning operations such as machining external and internal cylindrical surfaces, thread cutting, and parting off workpieces. Milling functions include keyway milling, drilling and reaming. It is suitable for small industrial businesses, workshops, garages, and similar environments. Main machine advantages: Fedjw H Rdmjpfx Aagofw - Dual function integration – turning and milling in a single, compact unit. - Separate drive motors for the lathe and milling spindle, both with stepless speed control – independent operation for each function. - LCD displays for monitoring and precise spindle speed adjustment. - Two spindle speed ranges – adaptable to a variety of materials and machining processes. - Complex part machining – eliminates the need to reposition workpieces on different machines. - Rigid dovetail guideways – high stability during milling operations. Technical specifications: LATHE 3-jaw chuck: 125 mm Swing over bed: 250 mm Swing over carriage: 150 mm Distance between centers: 750 mm Bed width: 135 mm Spindle bore: 29 mm Spindle taper: MT4 Spindle speed adjustment: Stepless (2 ranges) Spindle speeds: 50–1125 / 100–2250 rpm Metric threads: (18) 0.2–3.5 mm Imperial threads: (21) 8–56 TPI Longitudinal feed: (6) 0.07–0.4 mm/rev Compound rest size: 65 x 65 x 20 mm Maximum tool size: 12 x 12 mm Top slide travel: 70 mm Cross slide travel: 130 mm Longitudinal travel: 630 mm Tailstock quill diameter: 30 mm Tailstock quill travel: 70 mm Tailstock taper: MT2 Motor power (S1/S6): 0.75 / 0.9 kW / 230 V MILLING MACHINE Max. drilling diameter: 16 mm Spindle quill taper: MT2 Quill travel: 50 mm Head tilt: –90° to +90° Spindle-to-column distance: 170 mm Spindle-to-table distance: 43–250 mm Spindle speed range: 50–2250 rpm T-slots (number and size): 2 x 8 mm Motor power: 0.6 kW / 230 V GENERAL PARAMETERS Machine dimensions (LxWxH): 1350 x 580 x 1630 mm Weight: 230 kg Standard equipment: - 125 mm 3-jaw chuck + reverse jaws - Machine base - Fixed centers MT2 and MT4 - MT2/B16 drill arbor and drill chuck - Change gears - Set of spanners, oil gun, and service tools - CE-compliant guards