Membeli mesin bekas (274)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, EN IE 3 motor as standard Maximum air flow rate up to 10,000 m³/h at the fan Approx. 73 m² filter surface Pre-separator as standard 71 dB(A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content 0.1 mg/m³ reliably maintained (wood dust) Models with type-tested rotary valve (FSA) Tested non-return damper Integrated automatic extinguishing system 350+ P Inlet diameter: 355 mm Kjdpfx Asdqzhhol Aedt Rated motor power: 15.0 kW / 3Ph Voltage: 400 V / 50 Hz Max. air flow: 10,000 m³/h Rated air flow*: 7,127 m³/h Negative pressure at Vnenn.: 3,347 Pa Filter surface: 73 m² Chip collection volume (net/gross): 3 x 165 L / 3 x 241 L Sound pressure level: 72 dB(A) Dimensions (L/W/H) in mm: 3,112 x 1,058 x 2,361 Weight: 1,074 kg

Kondisi: baik (bekas), Lathe Length: 1750 mm Motor power: 3 kW Voltage: 380 Volts Kdodpfx Aloi Akv Se Aot Location: Available from stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Format Circular Saw Holzkraft / SCM minimax si 4 - 400 / 32 M A With tiltable saw blade and anodized aluminum sliding table Article number: 5504933 Brand: Holzkraft TECHNICAL DATA Dimensions and Weights Weight (net) approx.: 690 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter (saw blade guard): 80 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor power: 0.65 kW Output power (main motor): 7.0 kW Duty type (main drive motor): S6 Duty cycle (main drive motor): 40% Sliding Table and Work Table Sliding table length: 3200 mm Sliding table width: 360 mm Sliding table height: 175 mm Table length: 1000 mm Table width: 560 mm Table height: 900 mm Saw Unit Cutting width with rip fence: 900 mm Max. cross-cut width left of saw blade: 3200 mm Edging length: 3200 mm Saw blade tilt: 90° - 46° Max. cutting height at 90°: 136 mm Max. cutting height at 45°: 97 mm Max. cutting height note: Independent from scorer blade Saw blade diameter: 400 mm Saw blade diameter note: Independent from scorer blade Saw blade speed: 3500/5000 rpm Scoring Unit Scoring saw blade diameter: 120 mm Scoring saw blade speed: 9200 rpm EQUIPMENT Equipment Details Scoring unit with separate motor Anodized aluminum sliding table Handle for sliding table On/Off switch on sliding table for main and scoring saw blade motors Squaring frame Material roller on squaring frame Rip fence with round bar guide Stops: two professional folding stops Kdodjxw N N Hjpfx Al Ajt Edging shoe Eccentric clamp Table extension Table widening Saw blade oscillation guard Motorized height adjustment and tilting of the saw unit, digital display for tilt Location: ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Martin sliding table saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Tilting: one-sided Drive power: 5.5 kW Sliding table length: 3.0 m Cutting width: 1,350 mm Rip fence adjustable via handwheel Standard cross-cut table with length stop for angled cuts Analog length stop with continuous fence Rear table extension T66 T6615/2-a Drive power 5.5 kW T6630/3-a Sliding table length 3.0 m Kdedpfxsv Erkae Al Ast T 6635/3-a Cutting width 1,350 mm T 6641-a Rip fence adjustable via handwheel T6660/1-a Standard cross-cut table for angled cuts T 6670-a Analog length stop T 6680/1-a Rear table extension Location: ex stock 54634 Bitburg - Immediately available - Some images may show options that are not included in the offer.

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Vacuum membrane press The VP Series offers optimal solutions for woodworking applications. The VP 3000 is equipped with an integrated heating system, which shortens glue drying times to increase overall productivity. Possible applications: - Veneering / Form laminating / Wrapping - Coating of various profiles (veneer, paper, plastic, etc.) - Wood bending: Fabrication of curved and laminated components Features: - Heating system with adjustable temperature control - 2.5 mm rubber membrane - 12 mm plastic worktable - Oil-free Becker vacuum pump, 25 m³/h Kdjdpfx Alsdwh E Aj Ast - Vacuum control system / Tank capacity: 15 l Working area: 3000 x 1500 mm Heating system temperature: max. 60° C Heating power: 4.5 kW Pump power: 0.75 kW Vacuum pump capacity: 25 m³/h Rubber membrane Overall dimensions (LxWxH): 3100 x 1650 x 1600 mm Weight: 450 kg The machine is equipped with a mobile chassis. Location: Ex stock 54634 Bitburg – Loaded free of charge –

Kondisi: baru, Tahun pembuatan: 2026, TIL16001 Kodsy Ehcdepfx Al Asdt

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel Kjdpfogf Sw Njx Al Aedt - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: baru, Tahun pembuatan: 2026, Rojek Tilting Panel Saw The machine’s design incorporates numerous technical innovations that enhance the practical features of this model. Its high-quality construction makes this panel saw one of the best in its class. Standard features include an aluminum sliding table CV 360T, which is mounted with extreme precision and rigidity on hardened rods. Precision and reliability are ensured by the substantial trunnion guide for the saw mechanism housed in a robust cast iron body, as well as a separate motor for the scoring unit. Motor power: 5.3 kW Kjdpfjn D Arasx Al Aedt Separate scorer unit motor: 0.75 (1)* kW Saw blade spindle speed: 4400 rpm Max. saw blade cutting height (315 (350/400) mm): - 90°: 102 (120/138) mm - 45°: 71 (83/86) mm Max. saw blade diameter with scorer: 315 (350/400) mm Saw blade spindle diameter: 30 mm Saw blade tilting range: 90° – 45° Scoring blade diameter: 120 mm Scoring blade spindle diameter: 20 mm Scoring spindle speed: 8530 rpm (50 Hz) Table size: 400 x 955 mm Cutting width: 800 (500;1050;1300;1500) mm Extraction port diameter: 100 + 40 (80) mm Noise level (LpAeq): 92.9 dB Net weight: approx. 500 kg CV360 Sliding Table Aluminum sliding table size: 2500 x 360 mm Cutting length: 2500 mm Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and chips, designed for commercial use Article number: 5131400 Brand: Holzkraft DESCRIPTION Tested for dust according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models equipped with collision protection Area of Application Designed for commercial use For all woodworking machines with compatible extraction nozzle diameter High-quality, well-designed construction Robust and compact housing made of galvanized sheet steel Extraction connector can be easily converted from left to right, offering flexible use Large service openings Large, mobile chip containers with clamping bracket and chip collection bag Kjdpfx Asv Sk Tmol Aodt Dust extractor delivered fully assembled, ready for immediate use All models are mobile For model RLA 210: Optimal chip distribution in the chip containers due to large filter area Filter Description Ultra-compact design with maximum filter area Filter material made of polyester fleece, aluminium-coated, ensuring long service life Filter anti-static version as standard, tested and approved according to category M-BIA Fan positioned downstream from filter TECHNICAL DATA Dimensions and Weights Product length approx. 1241 mm Product width/depth approx. 830 mm Product height approx. 1750 mm Net weight approx. 210 kg Chip collection volume: 165 l Extraction nozzle diameter (outer) inlet: 140 mm Axis height extraction nozzle to floor: 850 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Extraction motor efficiency class: IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Filter cleaning: manual Noise Emission Maximum sound pressure level: 71 dB(A) Airflow Volume Nominal air volume: 1108 m³/h Maximum air volume: 1750 m³/h SCOPE OF DELIVERY Metal impeller Service opening for cleaning bypass filter 5 m connection cable with five-pin CEE plug and phase inverter Two fixed and two swivel castors with parking brake Manual cleaning

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Combination machine 4-way HOLZKRAFT CU 300 Classic F 23 N -- Technical Data -- - Circular Saw - Cutting length: 2,250 mm Max. saw blade diameter: 315 mm Max. cutting height at 90°/45°: 103 / 82 mm Max. crosscut width left of the saw blade: 2,310 mm Cutting width at parallel fence: 820 mm Saw blade tilting: 90° - 45° - Planer - Working width: 300 mm Planer table length: 1,510 mm Cutterhead diameter / Number of knives: 72 mm / 3 pcs. - Thicknesser - Table dimensions: 300 x 585 mm Min./max. working height: 3 / 230 mm Max. chip removal: 4 mm Feed speed: 7 m/min - Spindle Moulder - Kdedpsci Tvhsfx Al Aet Usable spindle length: 100 mm Max. tenoning tool diameter: 275 mm Max. tool diameter: 210 mm Spindle speed: 3,500 / 7,000 / 10,000 rpm Spindle diameter: 30 mm - General - Motor power: 400 V / 50 Hz, 3 x 5.0 kW (6.6 HP) Extraction port diameter: 4 x 120 mm Extraction port diameter saw blade guard: 60 mm - Special Offer Price - Location: Ex stock 54634 Bitburg

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, ST 3 classic F 23 - Combined Saw-Spindle Moulder Machine Features: - With tilting saw blade, tilting spindle moulder, and sliding table made of anodised aluminium - Robust steel and cast iron construction - Large support surface and precision-cast iron table - High-precision sliding table made of anodised aluminium (slide travel 2250 mm) - Large outfeed table (900 x 600 mm) with extendable aluminium telescopic fence - Max. saw blade diameter 315 mm with scoring unit, tiltable from 90°-45° - Saw rip fence with fine adjustment - Stable saw unit and large double-trunnion spindle moulder assembly ensure maximum stability, precision, smooth running, and long service life - Solid and precise machine table made from stress-relieved cast iron - Three spindle speeds, manually adjustable from 3,500 - 10,000 rpm - Spindle with forward and reverse rotation - Standard spindle moulder guard - Two 5.0 kW motors with ample power reserves Cast iron spindle moulder unit: - Secured on both sides at the top - Precision ball bearings at the top - Close to the lever point - Four optimally graduated spindle speeds enable workpiece sharpening Powerful motors: - Industrial motors suitable for continuous operation (100% duty cycle at full load) Kdedpfx Alscnwyde Ajt Scope of delivery: - Spindle moulder guard - Anodised aluminium sliding table - Aluminium fence jaws - Flip stops Technical data: - Dimensions cast iron work table: 1112 x 430 mm - Crosscutting length: 2250 mm - Max. saw blade diameter with/without scoring: 315 mm - Max. cutting height at 90°/45°: 100/70 mm - Max. crosscut width: 2660 mm - Saw blade tilt: 90° - 45° - Cutting width: 900 mm - Speed: 4000 rpm - Spindle moulder: - - Spindle tilt: 90° - 45° - Useful spindle length: 100 mm - Max. tool diameter: 210 mm - Max. tenon tool diameter: 275 mm - Max. retractable tool diameter: 180 mm - Speeds: 3,500/7,000/10,000 rpm - General: - - Motor power 400 V/50 Hz/S6 40%: 2 x 5.0 kW (6.6 HP) - Weight: 470 kg - Extraction port diameter: 2 x 120 mm - Extraction port diameter (blade guard): 60 mm Location: In stock at 54634 Bitburg - Available immediately -

Kondisi: sangat baik (bekas), Double bench grinder Rema / school machine Ksdpfjhaf Ndsx Al Asdt Disc dimensions (in mm): 300/40/76 Power (in kW): 1.8 Speed (rpm): 1450 Voltage: 380 Volt Lamp Safety shields Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Gannomat Concept 70 Eco Lamella Body Press with Rapid Traverse Technical Data: Lamella body press from our showroom Kdjdpey Egz Sjfx Al Ast Working range: width from 150 - 2,500 mm, height from 150 - 1,400 mm, depth 700 mm - Upper lamella pressure beam with 6 elements, side lamella pressure beam with 5 elements - Lamella pressure beams with industry-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the pressure beams is continuously electronically controlled via 2 potentiometers and set via a frequency inverter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beam min. 500 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg) up to continuously adjustable max. 2200 daN (kg) - Includes option: Rapid traverse speed for quick positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speed 5/10/25 mm/sec and rapid traverse speed 50 mm/sec. The sensors can be switched off for pressing special parts. - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and 45-degree carcasses. Simple operation via 6 separate push buttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm Machine is available for immediate delivery from our showroom. Location: Ex stock 54634 Bitburg - Immediately available -

Tahun pembuatan: 2026, Kondisi: seperti baru (mesin pameran), Vacuum Membrane Press The VP Series offers the optimal solution for woodworking applications. The VP 3000 is equipped with a heating system, which shortens the adhesive drying time, thereby increasing productivity. Applications: - Veneering / Form bonding / Wrapping - Coating of various profiles (veneer, paper, plastic, etc.) - Wood bending: Production of curved and laminated components The heating system comes with temperature regulation. Rubber membrane: 2.5 mm Tabletop: 12 mm plastic Oil-free Becker vacuum pump, 25 m³/h Vacuum control system / tank capacity: 15 l Working area: 3000 x 1500 mm Heating system temperature: max. 60°C Heating power: 4.5 kW Pump output: 0.75 kW Vacuum pump delivery rate: 25 m³/h Rubber membrane External dimensions: 3100 x 1650 x 1600 mm Weight: 450 kg Kdedpfx Aledvltyo Aet Location: Ex stock 54634 Bitburg - loaded free of charge -

Kondisi: baru, Tahun pembuatan: 2026, en-GB_Holzkraft Bandsaw HBS 633 S (IE3) Heavy-duty professional model with quick-release blade tensioning system for professional users Article number: 5150063 DESCRIPTION Heavy-duty professional design with high own weight for maximum smooth running Particularly smooth and precise operation thanks to the torsion-resistant machine housing Large, one-piece cast iron table, tiltable from 0° to +45° with ground and polished surface Patented table tilting device with handwheel and rack Quick-release blade tensioning system Precision bandsaw blade roller guides Fast and precise adjustment of cutting height via handwheel and rack with millimetre scale Safety switch for automatic shut-off when the door is opened Kdsdpovk Sfbefx Al Ajt Large cast parallel fence Supplied with mitre gauge as standard Table tilting via rack and handwheel TECHNICAL DATA Dimensions and Weights Length (product) approx. 1190mm Width/depth (product) approx. 820mm Height (product) approx. 2063mm Weight (net) approx. 377.7kg Extraction Connection Extraction port diameter 2 x 120mm Work Table(s) Work table length 830mm Work table width 600mm Work table height 830mm Work table tilt 0 – 45° Explanation work table tilt: For safety reasons, from 20° an additional holding device/stop must be installed to prevent wood from slipping! Electrical Data Connection voltage 400V Mains frequency 50Hz Output power 4.1kW Cutting Capacities Max. cutting height at 90° 400mm Max. cutting width with fence 570mm Max. cutting width without fence 610mm Bandsaw Blade Blade speed(s) 1615m/min Flywheel diameter 630mm Blade length 4600mm Blade guide Precision-guided top and bottom Location: ex stock 54634 Bitburg - immediately available -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, jumlah bilah: 4, berat keseluruhan: 1.100 kg, lebar kerja: 600 mm, RINCIAN TEKNIS Kodpjzkt Iajfx Al Aedt Lebar kerja: 600 mm Tinggi: 200 mm Panjang meja perata: 2.100 mm Jumlah mata pisau serut: 4 buah Kecepatan umpan: 7 + 14 m/menit RINCIAN MESIN Berat mesin: 1.100 kg PERLENGKAPAN Penahan bantu Aigner pada penahan perata Rangka mesin dengan konstruksi cor Meja ketebalan dengan panduan 4 arah Pengaturan dengan roda tangan Pelindung rangka

Kondisi: baru, Tahun pembuatan: 2026, Kündig Perfect-2 1350 RED-L – Hampir Baru – hanya digunakan selama 10 menit – Mesin pengamplasan pita lebar termasuk versi untuk pengamplasan antara lapisan cat Harga khusus untuk mesin pameran – mesin untuk keperluan internal – - Mesin pengamplasan pita lebar W yang kokoh dan hemat ruang untuk kebutuhan tertinggi. - Tinggi kerja konstan berkat pengaturan bagian atas - Lebar kerja: 1350 mm - Pengamplasan atas, dengan 2 unit pengamplasan - Rol kontak karet beralur dengan kekerasan yang teruji - Ketinggian rol kontak dapat diatur secara bertahap sesuai dengan skala grit pengamplasan - Pengangkatan/penurunan rol kontak secara elektrik sesuai dengan pilihan agregat - Bantalan pengamplasan segmen yang dikontrol secara elektronik - Seluruh unit bantalan pengamplasan dapat disetel miring 10 derajat - Rol tekanan baja yang dipoles dan fleksibel sejajar di bagian masuk - Rol tekanan berlapis karet di antara unit pengamplasan dan di bagian keluar - 2 motor 18,5 KW dan 11 KW, 400 Volt, 50 HZ - Pengaturan ketinggian yang dapat disesuaikan secara halus secara mekanis dengan tampilan digital - Tegangan, kendali, dan osilasi pita secara pneumatik - Konsumsi udara terkompresi sekitar 2 l/menit - Keamanan optimal berkat penghenti darurat otomatis dengan rem cakram jika pita putus, dll. - Umpan benda kerja 2,2 KW dengan karpet pengangkut dan rol penggerak - Perangkat vakum untuk seluruh meja kerja dengan lubang tambahan lebih dari 200 mm untuk benda kerja yang lebih kecil - Pengaturan otomatis ketebalan di seluruh lebar kerja - Pengaman benda kerja yang terlalu tebal dengan penghenti darurat umpan dan pengangkatan otomatis - Pengaturan bertahap penghilangan serpihan - Pengaturan umpan elektronik pada panel kontrol, secara bertahap 3 - 15 m/menit - Kendali PLC dengan penyimpanan "Teach-In" - Kendali karpet pneumatik - Penyangga benda kerja dengan rol di bagian masuk dan keluar - Enormatic: Pengaturan cepat dan pemicu umpan yang sepenuhnya otomatis - Mode hemat energi eco - Diagnostik kesalahan - Tinggi ruang bebas 210 mm hingga 18,5 KW - Dimensi pita pengamplasan 1350 x 2000 mm Perlengkapan Perfect: - Panel kontrol akrilik yang dapat diputar berkualitas tinggi - 10 layar sentuh - Kendali industri - Pengaturan tekanan otomatis dan penyimpanan elemen bantalan pengamplasan - Kompensasi elektronik ukuran butiran pita pengamplasan - Penghitung jam operasi dan penggunaan Perlengkapan untuk lapisan cat - Kecepatan pita pengamplasan yang dapat diatur secara bertahap pada agregat ke-2 - Nozel semprot untuk pembersihan pita pengamplasan agregat ke-2 yang dikendalikan secara operasional - Bantalan pengamplasan elektronik dengan lebar segmen 22 mm - Sisipan bantalan pengamplasan tambahan Kdodpfx Ask Dpp Sjl Aot Opsi tambahan yang disertakan dalam mesin: - Perpanjangan meja keluar yang dapat dilipat (tanpa pelat) - C10) Paket LED - ASB5+AS3) ECS peniup benda kerja dengan - Kipas Lokasi: 54634 Bitburg - Tersedia segera –

Kondisi: baru, Tahun pembuatan: 2026, Motorized thicknessing table adjustment with two speeds Digital display for working height Thicknessing table made of cast iron The thicknessing table is mounted on four large trapezoidal thread spindles for maximum stability and precision Four feed speeds Optional with two rollers in the thicknessing table Standard with noise and chip protection curtains at workpiece infeed and outfeed Adjustable roller pressure Front infeed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment Details TERSAModels with Tersa cutterhead Cutter change in seconds When the machine is started, the centrifugal force automatically tensions the planer knives—self-locking Blade projection is set automatically without the use of setting gauges Working Table The working table is mounted on four large trapezoidal thread spindles, ensuring maximum stability under all working conditions Standard with electric table adjustment Due to the special lifting mechanism, the table position is reliably maintained even without locking Helically grooved steel infeed rollers for continuous and uniform feeding Second, rubber-coated feed roller at the outfeed Heavy-duty anti-kickback devices prevent kickback of workpieces A 4-knife cutterhead ensures optimum planing results Dimensions and Weights Length approx. 1305 mm Width/depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter (planer) 150 mm Drive Performance Main motor 9 kW Setup Information Required space – length: 1305 mm Required space – width/depth: 1080 mm Required space – height: 1197 mm Explanation of required space: The dimensions account for maximum traverse paths or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Explanation of working area: Add the indicated dimensions to the required space to determine the recommended free installation area for the machine. Thicknessing Thicknessing table length: 630 mm Thicknessing table width: 1000 mm Working height min.: 3.5 mm Working height max.: 300 mm Working length min.: 210 mm Max. cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Mains frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Kjdpfxjy Eg Apo Al Aodt Location: In stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2025, Planer-thicknesser minimax fs 41es TERSA Maximum configuration for professional users. Item number 5503431 Brand Holzkraft / SCM Helical-toothed steel infeed roller ensures consistent and uniform material feed, allowing for chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious wood Models with TERSA cutterblock for tool-free, rapid knife changes and exceptionally quiet operation Material feed with two selectable speeds Extra-long surfacing tables for easy and precise straightening of workpieces Work tables made from stress-relieved cast iron: resistant to distortion and permanently flat Simultaneously rear-opening surfacing tables for reduced setup times Kodpfx Alolht Hto Ajdt Thicknessing table adjustment via handwheel with numeric indicator for planing height High machine weight ensures maximum precision and smooth operation Powerful industrial motor Sturdy steel/cast iron construction Quality – Made in Italy TECHNICAL DATA Dimensions and weights Length (product): approx. 2200 mm Width/Depth (product): approx. 1160 mm Net weight: approx. 450 kg Surfacing Total table length: 2200 mm Fence length: 1200 mm Working height: 905 mm Fence height: 150 mm Max. depth of cut – surfacing: 5 mm Dust extraction port diameter (thicknessing): 1 x 120 mm Thicknessing Thicknessing table length: 775 mm Max. working height: 240 mm Thicknessing table width: 410 mm Max. depth of cut – thicknessing: 5 mm Min. working height: 3 mm Electrical data Motor power: 5 kW Line frequency: 50 Hz Connection voltage: 400 V Cutterblock Type: TERSA Cutterblock speed: 5,000 rpm Cutterblock diameter: 95 mm Max. planing width: 410 mm Number of knives: 4 Feed Feed speed: 6 / 12 m/min SCOPE OF DELIVERY Jointing fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: Ex stock 54634 Bitburg – Immediately available –

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, OPTIdrill D 26PRO - Column Drilling Machine Table and column drilling machine with V-belt drive. User-friendly safety switch according to IP 54 with undervoltage release and separate emergency stop button. 400 Volt models with clockwise/counterclockwise rotation. Drilling depth stop. Precisely machined drill table with diagonally arranged T-slots. Height adjustment of the drill table via rack and pinion. Drill table tiltable ± 45° and rotatable 360°. Kdjdedqzbnjpfx Al Aot V-belt cover with safety switch. Aluminium die-cast quill lever, one-piece, with soft-grip handles. Industrial motor. Precision spindle bearing. Machine operation including safety electronics at 24 V DC. Guaranteed concentric accuracy.

Kondisi: baru, Tahun pembuatan: 2025, Large jointer tables made of cast iron The jointer table adjustment is facilitated by a precise parallelogram system, ensuring the distance between table edges and the cutterhead remains constant in any position. Kdsdpfxeff Efce Al Ast The large, sturdy tilting fence is made of anodized aluminum, easily adjustable and tiltable from 0° to 45°. The fence tilt is easily readable from the operator's position. Standard equipment includes auxiliary fence. Large four-knife cutterhead, precision-bearing mounted. Smooth operation due to the precision machining unit and heavy-duty cast construction. Powerful industrial motor. Maximum user safety with the simplest operation. Chip removal display via scale. Manual table adjustment. Motor protection switch. Equipment details Including foldable auxiliary fence for narrow workpieces. Manual quick-setting chip removal with scale & clamping handle. Guarding device The guarding device is foldable and designed to protect the operator without hindering work. Models TERSA with Tersa planer cutterhead system No more adjusting or screwing. Planer knife changes within seconds. Self-locking. Extremely quiet operation. Perfect planing results. Dimensions and weights Length approx.: 2750 mm Width/depth approx.: 1500 mm Weight approx.: 680 kg Jointer Total table length: 2720 mm Infeed table length: 1498 mm Max. depth of cut: 8 mm Fence length: 1200 mm Fence height: 190 mm Fence tilt range: 90–45° Dust extraction connection Extraction port diameter: 120 mm Drive power Main motor: 7 kW Setup information Required length: 2750 mm Required width/depth: 1604 mm Note: Measurements consider the maximum operating range or usable length. Electrical data Connection voltage: 400 V Phases: 3-phase Current type: AC Mains frequency: 50 Hz Planer cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 5000 rpm Max. planing width: 520 mm Location: Ex stock 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Weima Hacker / Penghancur WL 8 dengan Perlengkapan Terbaik - Baris pisau ke-2, Logspacer, dasar segmen 4 sisi, pengumpul material dengan motor roda gigi, Hidraulik cepat untuk gerakan mundur dengan katup peredam Penghancur satu poros WL 8 adalah model klasik yang terbukti efektif untuk menghancurkan limbah kayu dari semua jenis. Sebagai contoh, ribuan unit digunakan di seluruh dunia di perusahaan pengolahan kayu. Jumlah unit yang tinggi dari penghancur yang sangat diminati ini menjamin teknologi yang teruji dan andal dengan rasio harga-kinerja terbaik. Mesin ini menonjol karena konstruksi yang sangat kokoh, yang memastikan daya tahan yang sangat tinggi (bahkan di luar ruangan). Pengoperasian intuitif berkat kontrol Siemens SPS dengan layar sentuh Untuk memastikan bahwa elektronik disesuaikan secara optimal dengan mesin, kami merancang, membuat, dan memasang sendiri panel kontrol kami. Dalam proses ini, kami hanya menggunakan komponen berkualitas tinggi – misalnya dari Siemens atau Rittal. Antarmuka sentuh yang mudah digunakan menjamin penyesuaian yang cepat. Fungsi seperti pengaturan waktu atau penghentian gerakan memastikan throughput yang tinggi. Perlindungan kelebihan beban bawaan juga mencegah kerusakan pada mesin. Tidak ada penumpukan material karena desain corong yang memungkinkan pemotongan bebas Corong menjalankan beberapa fungsi sekaligus. Material yang akan dihancurkan dimasukkan ke dalamnya – secara manual, dengan mesin, atau melalui ban berjalan. Bukaan yang besar juga membuat pengisian bagian yang sangat besar menjadi mudah. Namun, yang terpenting untuk penghancuran adalah desain khususnya, yang membulat di bagian depan dan dengan demikian secara efektif mencegah penumpukan material. Bahkan pada bagian yang besar, penghancur dapat membebaskan dirinya sendiri. Jika diperlukan, baik perluasan corong maupun penutup dengan pegas gas tersedia. Bantalan rotor yang tahan lama berkat desain yang terpisah Bantalan rotor harus dibuat sangat kuat karena tekanan ekstrem yang dialaminya selama operasi penghancuran. Untuk mencegah debu atau benda asing masuk ke dalamnya, kami memisahkannya dari rangka mesin. Hal ini juga membuatnya sangat mudah dirawat dan mudah diakses. Diameter rotor (mm): 260 Panjang rotor (mm): 1000 Kecepatan putaran rotor (RPM): 80 - 125 Daya (kW): 22 Jumlah pisau: 54 Ukuran pisau yang tersedia (mm): 40 x 40 Ukuran butiran (mm): Lubang penyedot (mm): 200 Bukaan pengumpan (mm): 1000 x 1250 Panjang (mm): 2045 Lebar (mm): 1740 Tinggi (mm): 1840 Berat (kira-kira kg): 2200 Kodpfx Alspdqzxj Ajdt Aksesori: - Baris pisau ke-2 - Logspacer - Dasar segmen 4 sisi - Pengumpul material dengan motor roda gigi - Hidraulik cepat untuk gerakan mundur dengan katup peredam - Ukuran saringan 15/20 mm Harga daftar: 52.320,- Euro, dijual dengan harga khusus Lokasi: Tersedia di gudang 54634 Bitburg - segera tersedia - Gambar menunjukkan mesin tanpa pengumpul material, yang akan segera tersedia di gudang.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1991, nomor mesin/kendaraan: A7879, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 70 t, berat keseluruhan: 3.000 kg, lebar bukaan: 400 mm, RINCIAN TEKNIS Suhu pemanas: 70 - 100 °C Total gaya tekan: 70 Ton Gaya tekan spesifik: 2,5 - 3,5 kg/cm² Lebar bukaan: 400 mm RINCIAN MESIN Pengendali: Pengendali tombol tekan untuk membuka, menutup, dan berhenti Penggerak: Elektroidraulik Pelat pemanas: Aluminium Dimensi pelat pemanas: 2.550 x 1.100 mm Pemanasan: elektrik Silinder hidraulik: 4 Diameter silinder hidraulik: 80 mm Tegangan nominal: 380 V Jenis arus: 3~ Frekuensi: 50 Hz Tegangan kontrol: 220 V Arus nominal: 21 A Daya: 13,6 kW Dimensi & Berat Dimensi pengiriman: 2.900 x 1.400 x 2.000 mm Berat: 3.000 kg PERALATAN Tali pengaman Kodpfszktpqjx Al Aodt Pemantauan tekanan (Penyesuaian otomatis) Sakelar batas yang dapat disesuaikan untuk lebar bukaan tertentu

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Surfacing and thickness planer Holzkraft FS 30 Classic Tersa with Tersa cutter block and planer blades - quick-change system The Tersa planer blade system enables blade changes within seconds and ensures especially quiet operation. Helical serrated steel feed roller for constant and uniform wood feed Extra-long surfacing tables Large surfacing fence can remain in position when opening the surfacing tables. Surfacing tables open to the rear High machine weight Powerful industrial motor Sturdy steel and cast iron construction Total table length: 1510 mm Kdedsbuldyjpfx Al Ajt Feed table length / table height: 740 mm / 850 mm Working width: 300 mm Max. depth of cut: 4 mm Thicknessing table dimensions: 565 x 300 mm Min./max. working height: 3 / 230 mm Feed speed: 7 m/min Cutter block diameter / planer knives: 72 mm / 3 pcs Speed: 5200 rpm Motor 400V/50Hz/S6 - 40%: 4.0 kW (5.5 HP) Extraction port diameter: 2 x 120 mm Scope of delivery: Tersa planer cutter block, anodized surfacing fence Available ex-stock Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Kdjdpjlht Hzofx Al Aot