Milling machine

Deckel FP4M CE Konform

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in special light grey paintwork, CE compliant!!! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 >> Fixed-angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW Bwedpexctyajfx Abbsw >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills - SK40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all leadscrews move smoothly and evenly. The milling machine runs quietly, even at maximum speeds. Rapid traverse is available on all axes, and all bellows are new. The fixed-angle table has been newly planed. This is a reliable and user-friendly machine. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and more precise. You are welcome to inspect and test the machine under power at our premises.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, A machining center is available. Travel distances X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, spindle speed: 10,500 rpm, tool changer positions: 20, tool holder: SK40, table load capacity: 300kg, control system: Siemens Sinumerik. The machine's screen is defective. Documentation is available. An on-site inspection is possible. Bwjdpfx Aewxfa Hjbbew

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Bwedpfou Tuk Hjx Abbjw

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, Mesin Frais Universal DMG FP4M Edisi Spesial Dilengkapi dengan Tampilan Digital 3 Sumbu ND7013 dari Heidenhain, Kondisi Seperti Baru, Dibuat di Jerman, Sesuai Standar CE!!! Spesifikasi Teknis: Bwjdezung Eopfx Abbew >> Tahun Pembuatan 2022 >> Meja Putar yang Kokoh, Luas Permukaan Penjepit 480x800mm >> Penggerak Spindel, Rentang Kecepatan 25-3000 rpm, dapat diatur secara bertahap dengan input pada panel kontrol >> Penggerak Utama yang Dikendalikan, 6 KW >> Kepala Frais Vertikal, dapat diputar +- 90 derajat (180 derajat) >> Sumbu Linear, Rentang Gerakan 6-500 mm/menit >> Gerakan Cepat 1500 mm/menit >> Ruang yang Dibutuhkan (Lebar + Panjang) sekitar 2,2 x 1,9 meter >> Berat sekitar 1600 KG Aksesori dan Perlengkapan: >> Tampilan Digital Heidenhain ND 7013 >> Sistem Pendingin >> Pelumasan Jumlah Minimal >> Sistem Pelumasan Terpusat >> Kaki Mesin >> Buku Panduan Pengoperasian, dll. Tentang Mesin: Ditawarkan sebuah Mesin Frais Universal DMG FP4M Edisi Spesial dengan Tampilan Digital 3 Sumbu dari Heidenhain ND 7013 dalam kondisi seperti baru. Mesin yang andal dan mudah dioperasikan, dibuat di Jerman. Penggantian oli telah dilakukan. Mesin telah diperiksa secara mekanis dan elektrik. Manfaatkan kesempatan untuk memeriksa dan mencoba mesin ini secara langsung di lokasi.

Kondisi: bekas, Tahun pembuatan: 1984, Pergerakan sumbu-X: 300 mm Pergerakan sumbu-Y: 160 mm Pergerakan sumbu-Z: 340 mm Tampilan digital 3 sumbu HEIDENHAIN Penyangga spindel ISO 40 Kecepatan spindel 40 - 2000 RPM Langkah spindel 60 mm Ukuran meja 600 x 210 mm Kecepatan umpan variabel 5 - 500 mm/menit Kecepatan cepat 1200 mm/menit Daya penggerak 1,6 - 2,0 kW Kapasitas beban meja 200 kg Tegangan operasi 400 V Berat mesin sekitar 800 kg Ruang yang dibutuhkan sekitar 1,15 x 1,15 x 1,65 m Bwsdpfx Abozz S Dujbsw Lemari listrik 0,60 x 0,35 x 0,90 m !!! PERHATIAN !!! Kondisi SANGAT BAIK !!! Mesin berasal dari sekolah kejuruan! - Nomor pabrik: 2102-2445 - Tampilan digital 3 sumbu aktif HEIDENHAIN TNC 116 - Kecepatan cepat - Lampu mesin

Kondisi: bekas, Tahun pembuatan: 2016, Mesin Bubut Jarak pergerakan sumbu X: 661 mm Jarak pergerakan sumbu Y: 407 mm Jarak pergerakan sumbu Z: 508 mm Jumlah sumbu: 3 Mesin Bubut / Pusat Pemesinan Sistem kontrol: Hurco Max 5 / WinMax Pemasangan spindel: ISO 40 / DIN 69871 Kecepatan spindel: 10.000 RPM Rentang kecepatan hingga: 10.000 RPM Ukuran meja X: 762 mm Ukuran meja Y: 406 mm Berat benda kerja maksimum: 1500 kg Pengubah alat: 20 posisi Daya penggerak: 11 kW Torsi: 72 Nm Bwjdpfjzwnfyex Abbjw Kecepatan cepat: 28 m/menit Pendingin spindel Konveyor serpihan Pusat pemesinan vertikal CNC HURCO VM10i, tahun pembuatan 2016, dilengkapi dengan sistem kontrol HURCO MAX 5 dan perangkat lunak WinMax. Jarak pergerakan sumbu X/Y/Z 661 x 407 x 508 mm. Meja kerja 762 x 406 mm, beban meja maksimum 1.500 kg. Kecepatan spindel hingga 10.000 RPM, daya spindel 11 kW, torsi 72 Nm, pemasangan alat ISO 40 / DIN 69871. Pengubah alat 20 posisi, kecepatan cepat 28 m/menit. Sistem pendingin, sekrup konveyor serpihan, lampu ruang kerja, dan roda tangan elektronik.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2017, - Aksesori tersedia - Tampilan digital WEILER VCPlus AREA KERJA Tinggi puncak 180 mm Diameter putaran di atas meja 360 mm Diameter putaran di atas eretan 190 mm Jarak antar puncak 800 mm SPINDEL Kepala spindel DIN 55027/DIN ISO 702-3 Ukuran 6 Lubang spindel 57 mm Bodpfx Ajzu I Amebboww Diameter spindel di bantalan depan 90 mm PENGGERAK UTAMA Daya penggerak 60 %/100 % ED – / 10,5 kW Rentang kecepatan 25 – 4.000 rpm Jumlah kecepatan, dapat disesuaikan secara terus-menerus RENTANG UMPAN Jumlah, dapat disesuaikan secara terus-menerus Lurus 0,01 – 6 mm/putaran Melintang 0,003 – 2 mm/putaran RENTANG PEMOTONGAN ULIR Ulir metrik 0,1 – 20 mm PENAHAN Diameter pinol 50 mm Langkah pinol 110 mm Kerucut dalam DIN 228 MK 3 BERAT Mesin 1400 kg DIMENSI Panjang / Lebar / Tinggi 2000 x 970 x 1730 mm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout, Infinitely Variable Feed, Excellent Condition, CE-Compliant Technical Data: >> Year of manufacture: 1990 >> Machine serial number: 2102-5046 >> Rigid angle table Bjdpfxjzbb E Ae Abbeww >> Spindle speeds: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel (X/Y/Z): 300 / 160 / 340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm >> Vertical and horizontal quill – SK40 taper >> Drawbar system S20x2 >> Approx. weight: 800 kg Accessories and Features: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram About the Machine: Offered here is a Deckel FP1 universal milling machine, CE-compliant, in very good condition. The machine has minimal backlash and all feed screws move smoothly. Even at the highest spindle speeds, the milling machine runs very quietly. On this newer FP1 model, the feed is infinitely variable on all three axes, and the machine is also equipped with rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With the Heidenhain positioning control, you can enter dimensions and the machine will automatically move to position. The FP1 was located in a training workshop, where it was only occasionally used. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes work easier and even more precise. Take the opportunity to inspect and test this machine under power on-site.

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), de-to-hu-it-lt-lv-nb-nl-pl Bwjdpfx Abox U Dwijbsw

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, Perlengkapan: dokumentasi / manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feeds, very good condition, CE compliant Technical data: >> Year of manufacture: 1992; Machine no. 2102-6209 >> Rigid angle table (newly planed) >> Spindle speeds: 40 - 2000 rpm Bwodpfxsxdi Ivs Abbew >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100mm >> Vertical and horizontal quill – SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move smoothly. Even at maximum speed the milling machine runs very quietly. A special feature is that the control cabinet is connected to the machine via a plug, making the machine easier to transport. On this newer FP1 model, feed on all three axes is steplessly adjustable, and the machine also offers rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain distance control, you can enter dimensions which the machine will then automatically approach. The FP1 was previously in a training facility, where it was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this machine under power onsite.