Mesin penggilingan

Deckel FP4M

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, gores kuas bulu: 90 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, Perlengkapan: dokumentasi / manual, Dear Sir or Madam, We hereby offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The Deckel FP4MK has been extensively partially overhauled in our workshop, making it in top condition and technically, visually, and geometrically hardly distinguishable from a new machine. We look forward to your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Travel range X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Iijdpfxex Irwdo Aahsk Table configuration: Rigid angle table or rotary-tilt-swivel table Further equipment and accessories: including 3-axis Heidenhain digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request... Our Service Promise to You: - We are a certified master workshop in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - On request, we can completely or partially overhaul your selected machine - You are free to choose the paint color for your selected machine - If desired, you can order additional accessories such as tools, etc. directly - If desired, we can install further accessories such as safety devices, etc. - We are happy to arrange shipping and/or installation

Kondisi: bekas, Tahun pembuatan: 2017, Sheet width: 2070 mm Sheet thickness: 25 mm Pre-bend: 18 mm Top roll diameter: 320 mm Side roll diameter: 260 mm Bottom roll diameter: 320 mm Total power requirement: 26 kW Machine weight approx.: 8,100 kg Space requirement approx.: 4,700 x 2,000 x 2,200 mm Features: - Hydraulic side roll adjustment - Cone bending device - 2 driven rolls - Hardened rolls - Hydraulic drop end bearing - Mobile control panel - Foot switch Iisdpfxewc D Dxo Aahek - Safety device - CE marking

Kondisi: bekas, Geldmacher MST / Deckel FP4M Milling Machine, Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions / measurements: Reference value: approx. 2,500 × 2,700 × 2,100 mm (length × depth × height) Travel distances: X: approx. 500 mm Y: approx. 400 mm Z: approx. 400 mm Spindle taper / Tool holder: SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is adjustable on the ram. Spindle speed range: approx. 50 - 2,500 rpm Feed rates: Feed: approx. 8 - 630 mm/min; Rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We can also organise cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers as well. Iijdpfxsxcldke Aahok All company names and trademarks stated are the property of their respective owners and are used for identification and product description purposes only. Deviations from technical data or errors in the description of the article may occur and are subject to change.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1988, Universal tool milling machine Make: DECKEL Model: FP 4 M Aktiv Year of manufacture: 1988 – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine No.: 2203-7097 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 - Fixed table 800 x 460 mm (T-slot: 14 mm) - Vertical milling head SK 40 with Iisdpslfc U Djfx Aahok hydraulic tool clamping DIN 2080 - Chip tray - Central lubrication, electric - Coolant system - Operating manual Used, sold as seen The machine is in accordance with the technical standard of its year of manufacture.

Kondisi: baik (bekas), Mikron milling machine WF2/35 - Width: 120 cm - Depth: 140 cm - Height: 180 cm Good condition, fully functional. The machine can be inspected and tested under power on site. International shipping available. Iisdpfxsum Rpys Aahjk Inspection: Please note that, to avoid misunderstandings, the machine can be inspected and tested under power prior to purchase. Should you have any questions, please ask them before buying to avoid any uncertainties. For general inquiries or to arrange an inspection appointment, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Kondisi: baik (bekas), Tahun pembuatan: 1987, Mesin frais alat Deckel FP4M dengan display digital Heidenhain 3 sumbu, meja tetap, spindle SK 40. Aksesoris: berbagai collet dan arbor frais. Kondisi baik, siap pakai. Bisa diperagakan dalam keadaan menyala sesuai kesepakatan. Iijdpfx Aaoxmi I Iohsk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout in special light grey paintwork, CE compliant!!! Technical Data: >> Year of manufacture: 1987, Machine No. 2203-2790 Iiedpfxoxctyaj Aahok >> Fixed-angle table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed: 8 – 630 mm/min >> Motor power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head can be shifted 150 mm on spindle carrier >> Vertical and horizontal quills - SK40 taper >> Vertical quill extendable by 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Features: >> 3-axis Heidenhain digital readout >> Coolant system >> Chip tray >> Central lubrication About the Machine: Offered here is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine has been partially overhauled, has minimal backlash, and all leadscrews move smoothly and evenly. The milling machine runs quietly, even at maximum speeds. Rapid traverse is available on all axes, and all bellows are new. The fixed-angle table has been newly planed. This is a reliable and user-friendly machine. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and more precise. You are welcome to inspect and test the machine under power at our premises.

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Iiodpohigmbefx Aahjk Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 400 mm, panjang umpan sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, panjang meja: 790 mm, lebar meja: 460 mm, Table size 790 x 460 mm Iiodewffymspfx Aahek Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 400 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (maks.): 2.500 rpm, kecepatan spindel (min.): 50 rpm, gores kuas bulu: 90 mm, en-001 Iodpfx Ajvvtlgsaheik

Kondisi: bekas, Tahun pembuatan: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1,500 kg O F F E R We can offer you the following ex-stock, subject to prior sale and errors: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: ca. 1981 21S0401 _____ Working range: Longitudinal travel X-axis 400 mm Cross travel Y-axis 400 mm Vertical travel Z-axis 380 mm Fixed angular table approx. 450 x 800 mm Installation height under spindle approx. 65 – 445 mm Spindle taper SK 40 12 spindle speeds 50 – 2,240 rpm Quill stroke 110 mm Iodpfx Aju U Saboahjik Infinitely variable feed XYZ 1 – 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW – 380 V – 50 Hz Weight approx. 1,500 kg Equipment / Special features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels for all 3 axes for sensitive manual operation • Vertical head (swiveling +/- 90°) with quill and swing-away device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angular table 450 x 800 mm mounted • Integrated coolant system, attached electrical cabinet, central lubrication • Tool cabinet with extensive set of tool holders, horizontal milling device with various horizontal arbors, additional angular milling head, various operating tools • Work lamp, central lubrication, table exchange device This machine is still a “genuine” Mikron milling machine, manufactured in proven Swiss quality. It is ideal for both toolmaking and training purposes. Condition: Very good! Only used in toolmaking. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment due upon receipt of invoice A constant selection of universal and CNC milling machines of all types available from stock – Please ask for alternatives as well!

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Perjalanan sumbu X: 500 mm Perjalanan sumbu Y: 400 mm Perjalanan sumbu Z: 400 mm Kecepatan putar: 50 – 2500 rpm Daya penggerak: 2,7 / 4,4 kW Penjepit alat: SK 40 dengan penjepit hidrolik sesuai DIN 2080 Iiodpew I A D Tsfx Aahek Jenis meja: Meja tetap atau meja putar Luas permukaan meja: 650 x 380 mm Berat: 1600 kg Dimensi (dengan area keamanan): sekitar 2500 x 2700 x 1950 mm Warna cat: RAL 6011 hijau reseda Indikator digital: 3-sumbu HEIDENHAIN Perlengkapan: Pelumasan sentral, bak pendingin KSS, aksesori tambahan atas permintaan

Kondisi: sangat baik (bekas), Tahun pembuatan: 1984, Fungsionalitas: berfungsi sepenuhnya, Universal Milling Machine Deckel FP4M with 3-axis Heidenhain Digital Display in special paint finish Light Grey, CE compliant!!! Technical Data: >> Year of manufacture: 1984 Machine no.: 2203-1429 >> Rigid angle table (newly planed) >> Speed range: 50 – 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head displaceable on spindle carrier: 150 mm >> Vertical and horizontal quill – SK40 >> Vertical quill travel: 90 mm extendable >> Clamping system: M16 >> Weight: approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant equipment >> Chip tray Iodow N Sfvopfx Aahjik >> Central lubrication About the Machine: Offered here is a universal milling machine Deckel FP4M, CE compliant, in very good condition. The machine is partially overhauled, features minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speeds. Rapid traverse is functional in all axes, and all bellows are as new. The rigid angle table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically tested. Thanks to the Heidenhain digital readout, work is easier and even more precise. Take the opportunity to view and test the machine under power on-site.

Kondisi: bekas, Tahun pembuatan: 1989, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Aktiv Year of manufacture: 1989 – workshop inspected Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 Geometric acceptance with inspection protocol Accessories: Iedpsr En Dyjfx Aahjik - 3-axis digital readout HEIDENHAIN TNC 113 With active function in X-, Y- and Z-axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 With drawbolt thread S 20 x 2 - Coolant system - Centralised lubrication, electric - Operating manual Sold as seen, without warranty The machine complies technically with the state of the art at the time of manufacture.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1992, Fungsionalitas: berfungsi sepenuhnya, en-001 Iiedpfx Asu Tuk Hoahsk