Pusat pembubutan dan milling CNC

DMG MORI NLX 2500/700

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, DMG-draaicentrum (Bouwjaar 2019) in uitstekende staat met slechts 2800 spiluren! Inclusief: - Subspil - C-as - Y-as Psdpfx Ajya I Ibjbuepl - Spanentransporteur - Iemca Kid 80 stafaanvoerapparaat - Optioneel: set statische en aangedreven gereedschappen + bekken Volledige technische specificaties in de bijgevoegde documenten. CNC-besturing: M730UM CNC met CELOS Revolver: 12 stations Afstand tussen centers: 700 mm X-as verplaatsing: 260 mm Y-as verplaatsing: ca. 50 mm Z-as verplaatsing: 795 mm Maximale draaidiameter: ø 366 mm Bedwijdte: ø 920 mm Swing over support: 740 mm Stafcapaciteit: 80 mm Direct uit voorraad leverbaar. Let op: WIJ HEBBEN NOG EEN TWEEDE IDENTIEKE NLX 2500/700 SY (2019) TE KOOP BESCHIKBAAR (zonder stafaanvoer) OP DEZELFDE LOCATIE ALS DEZE MACHINE. GEEF HET AAN ALS U OVERWEEGT OM 2 MACHINES AAN TE SCHAFFEN. Let op: De informatie op deze pagina is naar beste weten en kunnen samengesteld. Deze informatie wordt te goeder trouw verstrekt, maar de juistheid ervan is niet gegarandeerd. Daarom is deze informatie niet bindend en vormt zij geen contractuele voorwaarde. Wij raden aan om alle essentiële details te controleren tijdens een inspectie van de machine. Om onnodige reiskosten voor onze klanten te besparen, adviseren wij in de meeste gevallen een live videobezoek te organiseren.

Kondisi: bekas, Tahun pembuatan: 2024, produsen pengendali: Sonstige, Beschreibung: Ppsdpfxsxv Nkuo Abujl Allgemein: Baujahr:2024 Verfahrweg X/Y/Z:800/ 1.500/700 mm Tischbelastung max.:800 kg Messgenauigkeit:0,0005 mm Wiederholgenauigkeit:0,002 mm Tastsystem:Renishaw PH 10M Plus

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, jam operasional: 6.500 h, jumlah sumbu: 3, This 3-axis DMG Mori Seiki NLX2500Y 700 was manufactured in 2012. It is equipped with a KITAGAWA hollow chuck, an upgraded coolant system with 5 bar pressure, and an integrated parts catcher. Additional features include a swiveling hinge-type chip conveyor, a bar feeder interface, and a signal tower. This DMG Mori Seiki NLX2500Y 700 horizontal lathe is ideal for turning and milling operations. Contact us for further details about this machine. Additional Equipment • KITAGAWA hollow chuck with KITAGAWA SS1881K21 for the main spindle • Coolant system with increased pressure (5 bar) • Hinged belt chip conveyor, right-side discharge • Integrated parts catcher for the main spindle • Bar feeder interface, LNS Ppodpjx D D Uwofx Abuel • Double foot switch with protective guard • Signal lamp (red, yellow, green) • 100 mm tool overhang for driven Y-axis + toolholder package • 45,000 VA transformer • 15 bar pump with filter Additional Information The machine has only approx. 6,500 operating hours and is in excellent condition. Included in the price: 12 driven toolholders, including quick-change systems, and 17 static toolholders. Original value: over €30,000.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, jam operasional: 3.751 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 700 mm, diameter pembubutan: 356 mm, kecepatan spindel (min.): 6.000 rpm, lubang spindel: 81 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 100 mm, jarak gerak sumbu Z: 795 mm, DMG MORI NLX2500/700 mesin bubut universal dengan sumbu Y, bar loader, dan perkakas bertenaga. Spindel utama dan spindel lawan. Diameter lubang spindel: 81 mm. TERMASUK paket perkakas (harga pembelian €64.000 / lihat lampiran). Ppsdpfx Aox Sp Izsbuel

Kondisi: baik (bekas), Tahun pembuatan: 2011, GILDEMEISTER CNC twin-spindle turning center Model: CTX beta 1250 4 A Machine no.: 00700000211 Year of manufacture: 2011 Control system: CNC path control incl. 19” TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run hours: 24,814 h Technical data and equipment available on request Psdjwcxlwjpfx Abuopl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, jam operasional: 9.080 h, Fungsionalitas: berfungsi sepenuhnya, For sale: Well-maintained CNC turning and milling center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control system! Only approx. 9,000 machining hours! Traverse paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Ppsdexzqhrepfx Abuol Features and accessories: - Tool turret: 12 positions, all driven - Max. speed of driven tools: 10,000 rpm - Parts catcher - Electrical main connection: 400 V - Power consumption: 37.6 KVA - Internal coolant system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with three-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with three-jaw chuck - Chip conveyor - In-process tool measurement - Manually installable measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Incl. tooling: 8 fixed tools, 3 driven tools - Incl. extraction system, make: Indusa - Including complete documentation Machine available immediately! Machine is fully cleaned and inspected! Loading by us! Transport can be organized upon request!

Kondisi: bekas, TECHNICAL DATA - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of live positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total installed power: 41 kW MACHINE HOURS - Power-on hours: 21392.8 h - Operating hours: 13797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-colour status light - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measuring probe - Parts removal unit - Parts conveyor belt - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of fixed tool holders: 10 Ppsdpfxex H Atys Abuel - Collet chuck

Kondisi: baik (bekas), Tahun pembuatan: 2010, Ref. No.: 10287 Manufacturer: DMG Model: DMC 210 FD Year of manufacture: 2010 Control type: CNC Control system: Heidenhain Mill Plus Location: Halberstadt Country of origin: Germany X travel: 2,100 mm Y travel: 2,100 mm Z travel: 1,250 mm Machine length: 11,000 mm Machine width: 5,000 mm Machine height: 3,500 mm Max. workpiece diameter: 2,500 mm Max. workpiece weight: 6,000 kg Max. rotary table diameter: 1,850 mm Rotary table speed range: 250 rpm Tool holder: HSK-A100 Tool magazine with: 183 pcs. Spindle speed: 12,000 rpm Max. torque at drilling spindle: 288 Nm Max. torque: 2,000 Nm Feed rates X/Y/Z axis: 30,000 mm/min Max. workpiece height: 1,460 mm Number of axes: 5 Additional information: Turning and milling center incl. pallet changer system Gear spindle 1,800 Nm Coolant processing system with band filter, 710 x 50 mm 1 chip conveyor Knoll 600S2 2 oil mist extraction units Losma 1 steel platform (storage area for clamping device), approx. 5,300 x 2,900 mm Ppsdpfxoxxn Ukj Abusl - Axes replaced 11/2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be inspected at any time by appointment.

Kondisi: bekas, Tahun pembuatan: 2017, nlx2500sy_hu Podpfxjxzk Ife Abujpl

Kondisi: bekas, Tahun pembuatan: 2014, Maximum turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Spindle nose: JIS A2-5 Spindle bearing diameter: 85 mm Spindle bore: 43 mm Max. usable bar diameter ( - ) mm Ppodpfx Abju Hq Rlouel Chuck diameter: 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool holder: BMT 60 Shank height for square tools: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec. Speed range - driven tools: max. 10,000 rpm Drive power - driven tools: 5.5 / 3.7 kW Total power requirement: 40 kVA Machine weight approx.: 6.4 t Space required approx.: 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 10.500 h, DMG Mori DMC850 V dengan Kontrol Siemens Jam Operasi: Siklus Otomatis: 10.500 jam Kondisi: Kondisi sangat baik, selalu diservis secara teratur dan dirawat secara permanen! Kapasitas & Area Kerja Sumbu X: 850 mm Sumbu Y: 520 mm Sumbu Z: 475 mm Dimensi Meja 1000 x 570 mm Spindle Utama Kecepatan Maks: 14.000 rpm Pjdpfx Abswzk Sasuopl Konektor SK40 30 alat Panjang alat maksimal 300 mm Sumbu Pengumpanan Gerak cepat (X / Z): 36 m/menit Kecepatan pengumpanan: 36.000 mm/menit Berat: 6.700 kg (tanpa konveyor serbuk dan pendingin) Manajemen Serbuk Konveyor serbuk Pompa pendingin Spesifikasi umum: 30 alat Probe pengukuran

Kondisi: bekas, Tahun pembuatan: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control system: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Counter-spindle speed range: 6,000 rpm Counter-spindle drive power: 11 / 7.5 kW Spindle bore (counter-spindle): 43 mm C-axis (counter-spindle): 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Podovy Ig Hjpfx Abuopl Y-axis travel: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Drive power for driven tools: 5.5 / 4.2 kW Total connected load: 41 kVA Machine weight approx.: 6.4 t Space requirement approx.: 5.0 x 3.0 x 2.3 m CNC Turning and Milling Center DMG MORI - NLX 2500 SY / 700 - Counter-spindle - Driven tool - C and Y axes

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7024NL256160890J, kecepatan spindel (maks.): 10.000 rpm, jarak lintasan sumbu Y: 200 mm, kecepatan rotasi (maks.): 4.000 rpm, Diameter batang (maks.): 80 mm, jarak antara pusat: 700 mm, Condition: Ball screw drives on X, Y, and Z axes are new + major maintenance package performed 6 months ago (machine was not in operation since then) TECHNICAL DETAILS Center distance: 700 mm Spindle speed: 1 - 4,000 rpm Main spindle power: 18.5 / 18.5 / 15 kW (25% DC / 50% DC / continuous) Bar capacity: Ø 80 mm Pjdpjxamqmjfx Abuepl Turret: 12 stations, bolt-mount turret Tool spindle speed: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Quill: MT5, live centre supported Centre points: without centre point Projection of driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assemblies: Integrated MK4 bearing for centre point Chip and cooling system Scraper-type chip conveyor: with magnetic separator, discharge height approx. 1,000 mm Cooling system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Coolant shower at chuck, incl. high-performance pump Compressed air blow-off system for tool holders Compressed air blow-off system for tailstock centre point Inline filter for cooling system EQUIPMENT - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light red, yellow, green, blue - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki gantry robot - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine comes without chuck

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, jam operasional: 56.089 h, KRnlc2hkbDQ3 Psdpfx Abjw Dfhujuepl

Kondisi: hampir baru (bekas), Tahun pembuatan: 2018, jam operasional: 23.501 h, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 740 mm, diameter pembubutan: 920 mm, daya motor spindle: 18 W, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 50 mm, jarak gerak sumbu Z: 795 mm, panjang spindle milling: 91 mm, kecepatan rotasi (maks.): 10.000 rpm, tinggi total: 2.395 mm, panjang total: 5.330 mm, lebar total: 4.100 mm, diameter ayun di atas peluncur silang: 740 mm, hidung spindel: JIS A2-8, berat keseluruhan: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS – ERGOline Touch) Capabilities X-axis travel mm: 260 Y-axis travel mm: ±50 Z-axis travel mm: 795 Turning length mm: 705 Max. turning diameter mm: Ø366 Turning diameter over bed mm: Ø920 Turning diameter over cross slide mm: 740 Bar capacity mm: 80 Tool Magazines Number of tool stations: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed driven tools rpm: 10,000 Driven tools output kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Counter Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Counter spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal light High-pressure pump Mist separator Work area lamp Dual foot switch for main and sub spindle Coolant gun Probe Paper band filter Preparation for robot operation Robot Data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in warehouse (10 slots) Clamping by robot: Ø40 to 220mm x Height 20mm Max. workpiece weight for robot: 5.6kg Machine Runtime: Power on hours: 23,501 Psdpfxswkf H De Abuspl Rated power kVA: 48 Cutting time: 7,494 Base Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360