Cnc-hochleistungsdrehzentrum

EMCO MAXXTURN 65

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 850 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 610 mm, diameter putar di atas sled silang: 500 mm, diameter pembubutan: 725 mm, kecepatan spindel (maks.): 5.000 rpm, lubang spindel: 65 mm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 80 mm, jarak gerak sumbu Z: 610 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 15 m/menit, pergerakan cepat sumbu Z: 30 m/menit, panjang pemakanan sumbu X: 260 mm, panjang umpan sumbu Y: 80 mm, panjang umpan sumbu Z: 610 mm, torsi: 250 Nm, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE including ShopTurn control! CNC turning center for complete machining of turned/milled parts. - Integrated spindle motors - Counter spindle, water-cooled (pre-loaded roller guideways) with Y-axis - On main/counter spindle - State-of-the-art SINUMERIK ONE control with ShopTurn dialog programming Main spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Counter spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Turret: - 12-station VDI 30 turret, radial, with directional logic for up to 12 driven tooling stations - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Y-axis: - Travel: +/-40 mm - Hollow clamping cylinder incl. draw tube - C-axis for main/counter spindle Control: - Sinumerik ONE / OPERATE - 22" multi-touch screen - SHOPTURN - 3D simulation - Remnant material detection - USB interface Gedpfx Asx E Dncshuebk - Electrical cabinet A/C unit Cooling: - Coolant system incl. coolant pump (3.5 bar) - Chuck flushing (additional pump 3.5 bar) - Part ejector and flushing via counter spindle Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate Control languages: - German/English Electronic handwheel EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE Alternating spindle speed Counter spindle as tailstock: This cycle allows the use of the counter spindle with a mounted live center to support workpieces. Thus, shaft parts can be supported and machined using the counter spindle even on machines without a tailstock. The max. tailstock force is limited to 50% of the maximum axis force. EMCO PROFI-NET ROBOT INTERFACE: Interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals are two-channel/potential-free. Digitalization package for Sinumerik: - Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems - Standard signals include: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95 and 105% • Piece count pulse (M30) • Programmable pulse (M300) 3D machine data / MT65-G2: 3D data model of the machine included Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are transported to a catch box (standard) or onto a conveyor belt (option). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For integration of EMCO SL1200 short bar loader. ...etc. Machine is immediately available!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 100 h, kecepatan spindel (maks.): 5.000 rpm, tinggi total: 1.800 mm, berat keseluruhan: 2.200 kg, produsen pengendali: FANUC, model controller: 31t- Model B, jumlah sumbu: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014 and features a robust FANUC 31i B control system and a double spindle arrangement with C and Y axes for complex machining operations. Equipped with a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length, this machine is ideal for precision turning and milling applications, providing a comprehensive solution for modern metalworking. Contact us for more information about this machine. Additional Equipment • Automatic bar loader with adjustable part length and bar diameter • Remnant extraction system • Polyurethane plastic guide channel • Longitudinal movement displacement system Advantages of the Machine Qualitative Machine Advantages • No spindle reduction required Gbjdpfx Aox D H Sfehujk Technical Machine Advantages • Cooling: Thermo-compensation unit • Axes: C axis and Y axis • System: Linear guideway system, digital drive system • PART CATCHER: Pneumatically operated finished part catcher for gentle unloading of finished parts. Finished parts are conveyed into a collection box (standard) or onto a conveyor belt (optional). Max. finished part length: 175 mm, max. finished part diameter: 65 mm. • Tool system: 12-position tool turret, VDI30 radial • Driven tools: up to 12 driven tools • Sub spindle speed range: 0-7000 rpm • Bar length capacity: 1200 - 3200 mm • Bar passage diameter: 20 - 65 mm • Feed rate: 0 - 627 mm/sec • Turning length: 650 mm Additional Information Control unit: Integrated PLC Features: Fully automatic work cycle, monitoring and fault diagnosis (display output) Tools Max power: 6.7 kW Max torque: 25 Nm Speed range: 0-5000 rpm C-axis: Available Media Power supply: 200/220/400 V AC Compressed air requirement: Min. 7 bar Air consumption: 45 L/min Installation position (mounting) The installation kit includes vibration-dampening, height-adjustable leveling pads and mounting brackets. Machine history Note: Machine as new with only 100 operating hours Dimensions Machine depth 4500 mm

Kondisi: bekas, Tahun pembuatan: 2008, en Godpfevvtpxox Ahujbk

Kondisi: belum diuji (bekas), Tahun pembuatan: 2005, Fungsionalitas: belum diuji, nomor mesin/kendaraan: S6AT2502, jarak pergerakan sumbu X: 250 mm, jarak lintasan sumbu Y: 40 mm, jarak gerak sumbu Z: 600 mm, kecepatan rotasi (maks.): 5.000 rpm, jumlah slot dalam magazin alat: 12, No minimum price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 250 mm Travel distance Y-axis: mm Travel distance Z-axis: 600 mm Max. spindle speed: 5,000 rpm Y-axis feed force: 7,000 N Rapid traverse: 12 m/min DRIVE & PERFORMANCE Max. drive power: 6.7 kW Main spindle speed range: 0–5,000 rpm SUB-SPINDLE Chuck diameter: max. 200 mm Speed range: 0–7,000 rpm Travel range: max. 580 mm ELECTRICS Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 85 A MACHINE DETAILS Overall height: 2,100 mm Overall length: 5,000 mm Overall width: 2,000 mm Total weight: 8,000 kg Tool holder: 30 mm CNC control manufacturer: SIEMENS CNC control model: SINUMERIK 840D Number of tool magazine slots: 12 EQUIPMENT Infinitely variable speed adjustment Godpfswvi Euex Ahusbk Chip conveyor With Y-axis and sub-spindle 12-station driven tool turret Tool holder: VDI 30 Including 3-jaw chuck (RÖHM, Ø 250 mm)

Tahun pembuatan: 2005, Kondisi: sangat baik (bekas),

Kondisi: baik (bekas), Tahun pembuatan: 2011, jam operasional: 4.700 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6CZ1151, lubang spindel: 65 mm, kecepatan spindel (maks.): 5.000 rpm, daya motor spindle: 29.000 W, saluran batang: 65 mm, Perlengkapan: dokumentasi / manual, pengumpan batang, de Gjdpexwp I Asfx Ahuobk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: S6AW11S1, diameter putar di atas sled silang: 540 mm, panjang pembubutan: 550 mm, diameter pembubutan: 600 mm, kecepatan spindel (maks.): 5.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak gerak sumbu Z: 800 mm, Machine with C-axis, E-axis, Y-axis, W-axis, and driven tools at all stations TECHNICAL DETAILS Swing diameter over bed: 600 mm Swing diameter over cross slide: 540 mm Turning length: 550 mm Longitudinal travel (Z-axis): 800 mm Cross travel (X-axis): 260 mm Control: Fanuc 18i-TB Spindle bore: 73 mm Bar capacity: 65 mm Spindle speed: 0 - 5,000 rpm Spindle torque: max. 250 Nm Distance between spindle and sub-spindle: 1,050 mm Sub-spindle: A2-6, travel distance: 800 mm, spindle: 105 mm, torque: 250 Nm Rapid traverse in X/Y/Z axes: X/Z: 30 m/min / Y: 12 m/min Rapid traverse speed C-axis: 1,000 rpm MACHINE DETAILS Operating pressure: 6 bar Total power requirement: 40 kVA Machine weight: approx. 5.7 t Gbsdpfx Aew T Sq Tohusk Machine dimensions LxWxH: 2.2 x 3.4 x 2.4 m Machine transport dimensions: approx. 3.3 x 1.9 x 2.2 m Electrical specification – voltage/frequency: 3 x 400 V / 50-60 Hz Chip conveyor dimensions LxWxH: approx. 2.9 x 0.6 x 0.55 m (0.38 t) Chip tray dimensions LxWxH: approx. 1.6 x 1.3 x 0.25 m (0.2 t) EQUIPMENT - Control cabinet fitted with Rittal cooler - Hinged belt chip conveyor - Chip tray - Compressed air gun - No chuck included in the sale