Mesin pelapis tepi

Felder G360

Kondisi: hampir baru (bekas), Tahun pembuatan: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 racking uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Horizontal and diagonal braces for 4,000 mm racking length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Replacement parts available for reorder and expansion at any time) - (Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes horizontal and diagonal braces for 1,300 mm upright spacing - Racking length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone advice - Made in Germany - Short delivery times - Onsite collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with advance delivery notification. The material is sensibly packed for easy unloading. When installing outdoors, load capacities are reduced due to wind and snow loads. The foundation must be concrete, level, suitable for anchoring, and capable of supporting all applied loads. The customer is responsible for checking and ensuring subsoil condition, bearing capacity, and any necessary official permits. The uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association guidelines, it is recommended that the uprights have a minimum protrusion of 500 mm above the highest storage level. Fpjdemhhf Sspfx Alysk

Kondisi: baik (bekas), Tahun pembuatan: 1997, Fungsionalitas: berfungsi sepenuhnya, - PVC Primus, sistem cartridge PVC 3 mm - Pengeleman, pemotongan rata, frais rata, frais serong, frais radius - Pisau tarik, unit pemoles - Dimensi: 4700 x 1400 x 1650 mm - Berat: 1300 kg - Ukuran kerja: panjang 4500 mm lebar 1020 mm tinggi 1630 mm - Diameter konektor: 140 mm - Lebar benda kerja: min. 60 mm - Kecepatan feeding: 11 m/menit Fedpfjwv Uq Aex Alyspk - 6 bar - 400 Volt udara tekan - Ketebalan edge: 8 mm untuk strip, 2 mm untuk roll - TANPA unit pra-frais - Silinder pneumatik baru Pengiriman tersedia dengan biaya tambahan! Karena usia mesin bekas, tidak ada garansi untuk penjualan kepada pelanggan bisnis.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Mesin pelapis pinggir Produsen: Felder Tipe: Tempora 60.06, F600 Tahun pembuatan: 2019 Pengoperasian sepenuhnya otomatis dari panel kontrol. Unit penyambung: Ya Fjdpfx Alsxix Hxeyopk Unit gergaji potong: Ya Unit frais radius: Ya Pisau pengerok radius: Ya

Kondisi: baik (bekas), 0134 Marke: BRANDT - DEUTSCHLAND Modell: KTD 53 Automatische Kantenanleimmaschine für Holz, PVC, Furnier, Möbel, Sonderanfertigungen und Tischlereien. Fsdpfjwq Sc Ssx Alyepk Technische Daten: Min./Max. Plattenhöhe: 10/40 mm Kantenstärke min./max.: 0,4 - 1,5 mm Vorschubgeschwindigkeit: 7 m/min auf motorisiertem Rollenförderer Min. Plattenbreite: 65 mm Ausstattung: Leimauftragseinheit Schneideeinheit Kappschneideeinheit Obere/untere Fräseinheit Fahrrollen am Maschinenuntergestell für einfaches Bewegen Spannung: 380 V / 50 Hz Gesamtanschlusswert: 4,5 kW Druckluft: 6 bar Abmessungen (L x B x H): 1800 x 615 x 1170 mm Gewicht: 280 kg

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Used double-sided cantilever racking: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided uprights, height 3,500 mm, with bases, each 1,200 mm - 24 cantilever arms, 1,200 mm deep, standard - Incl. longitudinal and diagonal bracing for 1,300 mm axle spacing - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright with 6 bolted cantilever arms and 2 base plates, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including mounting material (without floor anchors) - With assembly instructions and load signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notification before delivery. Material is packed sensibly for easy unloading. Fpodpfemkixwjx Alyek When installed outdoors, the load capacities are reduced due to wind and snow loads. The subsoil must be concrete, level, suitable for doweling, and able to withstand the loads. The floor condition, bearing capacity, and any required building permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is neither required nor recommended. According to occupational health and safety, it is recommended that the racks have a projection of at least 500 mm above the top storage level.

Tahun pembuatan: 2021, Kondisi: baru, en-GB: Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex location incl. loading! 1 rack unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! Naturally, you can build longer or shorter rack units by omitting or purchasing additional frames (and by varying the bay pitch), this example with 4 frames is just the most common racking solution! A cantilever racking system, hot-dip galvanized, consisting of: - 4 double-sided uprights approx. 4.16m high, hot-dip galvanized - IPE 160 / 100 - Each with 2x3 adjustable arms, 1.20m long, 750kg load capacity per arm - With bracing approx. 1.30m - Uprights double-sided, approx. 4160mm high, hot-dip galvanized - Foot and arm depth 1200mm, each with 3 height-adjustable arms - Load capacity at load centre 600mm: 750kg per arm / 2,250kg per upright side - With longitudinal and diagonal bracing, bay pitch = 1300mm, standard is 1.30m. - Other standard bay pitches available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! - From bay pitch 1.50m, a small surcharge will apply to the stated price! Fjdsfivhfjpfx Alyjpk - Special sizes (other bay pitches) are also available on request, but incur a surcharge and have a longer delivery time as they are custom-made! - If you do not specify a different bay pitch, we will supply the rack with a bay pitch of 1.30m. - With this, the length of a racking row with 4 uprights (3 bays) is approx. 4m. - Supplied with all bolts and nuts (shipped within Germany via parcel direct from Würth), without floor anchors. Other configurations (upright heights, arm lengths, arm types, etc.) available! Please contact us!

Kondisi: baru, de Fpodsyvt Exopfx Alyek

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, lebar total: 80 mm, panjang total: 1.600 mm, bentang bebas: 30 mm, Rak Penyimpanan Cantilever – Solusi Ideal untuk Menyimpan Barang Panjang dan Berat Rak penyimpanan cantilever dirancang khusus untuk penyimpanan yang efisien dari produk besar dan berat seperti pipa, kayu, profil logam, palet berukuran besar, dan material lain dengan bentuk tidak beraturan. Fitur Utama: • Konstruksi kokoh • Lengan yang dapat disesuaikan untuk fleksibilitas penyimpanan maksimal • Akses mudah dan pengorganisasian barang yang optimal • Cocok untuk beban berat dan produk ukuran besar • Desain modular, mudah diperluas sesuai kebutuhan gudang Manfaat: • Memaksimalkan ruang penyimpanan horizontal • Mengurangi waktu penanganan • Meningkatkan keselamatan dan efisiensi penyimpanan Ideal untuk gudang industri, bengkel, pabrik, dan pusat logistik. Fsdpfx Aew S Ttyslyspk Harga bervariasi tergantung pada model dan ukuran!

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1979, Raimann saw height: 90 mm, chain width: 250 mm, after overhaul. The machine has undergone a complete refurbishment. Motor: 22 kW. Cutting width: 250 mm. Shaft diameter: 80 mm. Main drive from the motor to the shaft via flat belt. Fpjdeh Rv Eyopfx Alyjk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, nomor mesin/kendaraan: 18738, Fungsionalitas: berfungsi sepenuhnya, jam operasional: 600 h, jenis arus masuk: tiga fasa, lebar sabuk penghalus: 150 mm, panjang sabuk penggiling: 7.800 mm, jenis penyesuaian ketinggian: listrik, tinggi total: 1.310 mm, panjang total: 1.510 mm, lebar total: 3.880 mm, berat keseluruhan: 750 kg, persyaratan ruang panjang: 3.880 mm, lebar yang dibutuhkan: 2.352 mm, panjang meja: 2.800 mm, penyesuaian ketinggian meja: 220 mm, lebar meja: 950 mm, Perlengkapan: dokumentasi / manual, en-GB_Langbandschleifmaschinen Johannsen Model: T 85/PNEUMA Year of manufacture: 1990 Operating hours: approx. 600 Machine data: Footprint Total length 3880 mm Depth 1510 mm Height 1310 mm Required space Length 3880 mm Depth 2352 mm Table size 2800 x 950 mm Weight 750 KG Equipment: • Pneumatic sanding unit • 4 sanding pads Fpjdpfsugvxxjx Alyek • Lighting inside belt cover • Vacuum clamping device incl. vacuum pump • Belt blow-off nozzle • Pneumatic rotary table • 2 belt speeds • Pneumatic belt tensioning • Electrically adjustable table height • Rack with approx. 100 sanding belts (belt dimensions: 7800 x 150 mm) Filter system: Footprint 1600 x 960 mm, height 2850 mm 18 fine filters The machine is fully functional Condition: very good