Granulator

FILTEC

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 2.500 h, Fungsionalitas: berfungsi sepenuhnya, Used pellet production plant, capacity 2.5 tons per hour, complete with belt dryer. Ltodewk Htxspfx Aahea

Kondisi: sangat baik (bekas), Tahun pembuatan: 1989, Pinheiro SFM1-900 - Wheel diameter: 900 mm Ltjdpfx Aaetwrqbehsa - Motor: 11 kW - Feed wheel height: 24 cm - Belt length: 620 to 645 cm

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, EN-2587k-used-compound-granulation-line-translation Ltsdpfxstvfhce Aahsa

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Heavy-Duty Granulator Manufacturer: Herbold AMIS Type: SM 60/100 7-2 Feed Opening: 700 x 1000 mm Open Rotor: 600 mm diameter x 980 mm width Rotor Knives: 7 Ltedsufi Rxjpfx Aahsa Stator Knives: 2 Additional Knife Set: 2 Knife Adjustment Table

Kondisi: baru, TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW Cooling capacity: up to 116 kW Medium: Oil up to 350°C Maximum external volume: 66 l at 350°C Max. flow rate: up to 150 l/min Max. delivery pressure: up to 8.0 bar Motor power: 2.8 or 4 kW Dimensions (LxWxH): 1,414 x 503 x 1,350 mm (without connections in continuous bypass) Weight: approx. 225-320 kg Circulation medium connection: Flange DN25 PN16-40 (DIN EN 1092-1), Form B1 EQUIPMENT HIGHLIGHTS: - Control and regulation unit: Smart Controller (7" touch display) - Heater control via solid state relays - Control cabinet IP54 - Cooling controlled by solenoid valve - Flow measurement by differential pressure method - Bypass between supply and return with reduced cross-section - Level monitoring by magnetic float switch - Flow monitoring by detection of heater surface temperature and flow rate - Dirt filter in cooling water inlet and in return of circulation system - Monitoring of supply temperature by electronic safety temperature limiter - External oil filler neck - DILO-type fittings on internal piping connections (except pump connections) - At 350°C: Continuous bypass, including bellows valves - Connection for nitrogen blanket with manometer and safety valve set to 0.5 bar at 350°C (option) Visit our website for more details or for other performance classes. Ltodpfsg Ey Rfex Aahea Device complies with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are specified in quotations or order confirmations.

Tahun pembuatan: 2019, Kondisi: baru, Model: KPZ-4P Type: Enclosed Working dimensions: 3500 W x 1800 H x 1000 D mm External dimensions: 3300 W x 2300 H x 1800 D mm Operation: Electric Power: 2.75 kW Voltage: 380 V Frequency: 50-60 Hz Filters: 6 pcs Filter type: Polyester Filter cleaning: Jet Venturi Filter area: 22.5 m² Fan material: Aluminium Fan noise level: 74 dBa Ltsdpebxmfnsfx Aahsa Air consumption: 20,400 m³/h Warranty: 12 months

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis K&C Digital Readout, NEWLY Overhauled with Acceptance Protocol for New Machine Tolerances Technical Data: >> Machine No.: 2020 >> Center Height: 180 mm >> Distance Between Centers: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Taper: MK 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads Possible: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Engagable Spindle Brake >> Drive Power: 2.0/4.0 kW >> Length: 2.2 m, Height: 1.5 m, Depth: 1 m Accessories and Equipment: >> 3-axis K&C digital readout, new, 12 months manufacturer’s warranty, with operator manual Functions: Switching mm/inch, Coordinate selection ABS/INC, halving of display value, reference point, tool programming (200 tools), taper calculation, radius/diameter display, quick zeroing, counting direction switch >> 200 mm wedge-bar chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine mounts >> Coolant system >> LED machine lamp Ltodpfovrckqox Aahoa For safety, the machine is equipped with: >> Electronic spindle protection >> Spindle brake >> 2 emergency stop buttons Upon request: Guards for lead and feedscrew About the machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guides have been newly ground or scraped. Acceptance with inspection protocol. Paint finish: 2K high-gloss white. Multifix and chuck are new. For safety: This machine has a brake motor, electronic spindle protection, and two emergency stop buttons—an as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and can produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Tahun pembuatan: 2024, jam operasional: 10 h, Kondisi: hampir baru (bekas), Extrusion line with stuffing unit – ideal for recycling applications This robust and versatile extrusion line is optimally suited for recycling polyolefins such as LDPE, HDPE, and PP. Thanks to the integrated stuffing unit, materials with low bulk density – such as regrind, EPS, film scraps, or other lightweight plastic waste – can be processed without difficulty. The stuffing unit reliably compacts loose material and feeds it directly to the extruder. This ensures uniform material intake and stable extrusion, even with challenging feedstocks. Advantages: • Effortlessly processes all types of polyolefins • Ideal for light and bulky materials such as EPS or film regrind • Efficient material feeding thanks to integrated stuffing unit • Compact design, easy to maintain - Single-screw extruder / melt extruder - Screw diameter: 145 mm - Drive: 45 kW - Induction heating - Stuffing unit Ltjdpfx Ajtziudoahea - Hopper for material feed (suitable for low bulk density material) - Large filter / screen changer - Strand die adapted

Tahun pembuatan: 1998, Kondisi: hampir baru (bekas), VAN DAM 568 COM III 8-COLOUR CUP PRINTER 560 COM III 8-colour cup printer, the machine is in good condition. The specifications are listed below. Machine type: Cup printing machine Brand: Van Dam Model: 560 COM III Year: 1998 Colours: 8 colours Minimum cup diameter: 63 mm Maximum cup diameter: 203 mm Condition: In good condition Ledpfoh Ha I Eox Aahjta If you have any questions about the machine or its specifications, please feel free to contact us at any time.

Tahun pembuatan: 1999, Kondisi: bekas, Used Entex Extruder PL-WE150, complete with control cabinet, previously used for powder coatings, in good condition. Ledpfebqt Arjx Aahsta We can also offer you an Entex PL WE 70!