Pencucian mobil

Franco Walter Franke Profi 3000

Tahun pembuatan: 2022, Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, EN001 Itjdpfjwz Iktex Aahjr

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Cleaning System Type W 60 C Machine body, internal pipework, control cabinet and washing basket made of stainless steel Combination unit - rotary table system with removable turning device and small parts basket - Basket diameter, rotary table washing basket: 600 mm - Usable interior height: 370 mm - Basket load, rotary table washing basket: 100 kg - Usable interior height: 530 mm - Small parts basket dimensions: 375 x 220 x 200 mm Mesh size: 12 mm - Basket load, small parts basket: 20 kg Fully stainless steel construction Pumps and external pipework/fittings Configured for operation with liquids up to a density of 1.3 via reinforced pump with frequency converter Chip/particle filter with bath cover plate Eco-rinse (loss rinse) for minimal water consumption Water supply via operator's mains with integrated machine-side hot water supply Hot air drying 1 x 4 kW Oil skimmer Itodpfxoq Ewgko Aahjr Drainage system/floor flushing with pump and stainless steel pipework

Kondisi: baru, AGRE ALUP ALLEGRO 14+ 13 270 Speed-controlled. Space-saving. Cost-effective. Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Impressive compressed air quality. Cyclone separator and refrigeration dryer integrated. Itjdpfx Aoixt I Hoahor Detailed equipment: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High-frequency motor, with 1:1 direct drive Control: Speed-regulated with frequency inverter Controller: Graphic controller C55DD Refrigeration dryer: Integrated, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted Performance data: Free air delivery at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load: 16.2 kW Rated motor power: 15 kW Oil quantity: 5.2 l Dimensions and Weight: L x W x H = 1655 x 655 x 1550 mm Weight: 400 kg Compressed air outlet: G 3/4'' Compressed air receiver capacity: 270 l

Kondisi: bekas, Tahun pembuatan: 2009, en-001-techspecs-2024-06 Itsdpju Nu Iyefx Aahsr

Kondisi: baru, Tahun pembuatan: 2025, Parts cleaning machine, spray cleaning system type L800FP Fully automatic hot water parts washer with basket drive via gear motor, housing made of stainless steel 1.4301, pipework and rotary basket made of zinc-plated steel, special nozzle system with stainless steel flat spray nozzles, wash pump made of stainless steel (manufacturer: Xylem/Lowara), level control for dry-run protection, - Basket diameter: 780 mm - Useful height: 500 mm - Max. loading weight: 150 kg - Spray pressure: 3 bar - Tank capacity: 120 liters - Heating: electrically adjustable (ambient temperature – 60°C) System dimensions (LxWxH): 1,160 x 1,200 x 1,750 mm Suction filter protects pump Iodeuxuv Aspfx Aahotr Delivery: ex works, FCA

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Ultrasonic Cleaning System ULTRA200 Usable platform dimensions: 850 x 450 mm Max. usable height: 400 mm Max. loading weight: 100 kg Volume: 380 liters + 55 liters (oil separator) Heating: 2 x 4 kW Constructed entirely from stainless steel Iodov U A Izepfx Aahotr Heat and sound insulated External dimensions approx.: L 1,500 x W 950 x H 1,750 mm Control: Fatek, HMI by Weintek Electrical connection load: 10.55 kW Includes: - Automatic pneumatic goods lift - Surface rinsing/oil separator for bath maintenance - Ultrasonic immersion transducer with dual-side sonication - Output: 2,000 W effective / 4,000 W peak - Multifrequency: 20 kHz / 40 kHz - Manual blow-off gun Demonstration unit from the Glogar Technology Center, available immediately

Kondisi: baru, Tahun pembuatan: 2025, General: - Maximum temperature range: 150°C for oil (heat carrier fluid) - Robust sheet steel housing - Unit mounted on castors Hydraulics: - Seal-less immersion pump - Qmax. 60 l/min – Pmax. 3.8 bar - Tank and heater made of stainless steel - Heating capacity: 9 kW - Tank capacity approx. 20 litres Itedpfsddv Itsx Aaher - Fittings made of brass/stainless steel - Manual oil filling - Mechanical level indicator - Indirect cooling system (shell and tube heat exchanger) - Cooling capacity: approx. 40,000 kcal/h - Pressure gauge - Bypass - Solenoid valves for cooling Electrics and control system: - Electronic PCB control - Solid state relay - Safety thermostat - Sensor breakage monitoring - Connection cable with plug Available in approx. 4 weeks!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2020, Press force: 500 t Clear width: 1100 mm Stroke: 600 mm Approx. machine weight: 22.8 t Table size: 1100 x 800 mm Ram size: 1100 x 800 mm Installation height: 800 mm Hydraulic system: 300 bar Closing speed: 60–200 mm/sec Itsdpfx Aaoffamvjhjr Pressing speed: 0–9.5 mm/sec Opening speed: 28–200 mm/sec Table height above floor: 900 mm Overall height above floor: 5100 mm Max. tool weight: 2000 kg Tool weight upper part: 1000 kg Minimum hall height: 6500 mm Number of press cylinders: 1 pc. Number of traversing cylinders: 2 pcs. Pump capacity: approx. 270 l/min Oil tank: 600 l Main motor: 75 kW Control technology from SIEMENS: S7 Safety control: PILZ Multi

Kondisi: sangat baik (bekas), Tahun pembuatan: 1988, Manufacturer: LÖDIGE Year of manufacture: 1988 Model: FKM 4200 D Itjdpfx Aaorywvdehjr Electric motor: 75 kW Siemens

Tahun pembuatan: 2012, Kondisi: sangat baik (bekas), Three-dimensional nozzle pipe system Basket diameter: 600 mm Basket load capacity: 100 kg Usable internal height: 370 mm Includes accessories for CE certification: Itsdsidxzdopfx Aahsr - Direct drive for the wash basket - Weekly timer - Low water level protection - Chip/particle filter with bath cover plate - Steam extraction unit Automatic level replenishment: - Automatic level replenishment Blow-off/Drying function: Three-dimensional impulse compressed air blow-off Bath maintenance: Disc oil skimmer – intermittent oil removal – For floating/demulsifying oils Bag filter unit Type Sʺ With 2 pressure gauges on the bag filter housing after filtration System draining and cleaning (work safety): Pumping device/flushing of tank bottom Hose assembly/discharge valve in aluminium/plastic Option – AM version: AM version for additional manual cleaning (high-pressure) of parts with complex geometries or areas that are difficult to access/undercuts, such as long bores, channels, heavily soiled surfaces, e.g. oil carbon removal, without contaminating the operator, via: - Lid with viewing window, lighting, and gauntlet gloves - Washing brush device - Hand gun via pump 3 – 6 bar - Blow-off gun compressed air - Front insulation High-pressure cleaning AM: High-pressure unit for individual cleaning of specific part geometries: Version with 100 bar