FZR 320

FZ-Recycling GmbH & Co. KG FZR 320

Technical Data for EPS (Styrofoam) Compactor:

Manufacturer: FZ-Recycling GmbH & Co. KG, Germany
Model: FZR 320
Year of Manufacture: 12/2022
Drive Power (Shredder): 4 kW
Drive Power (Compacting Screw): 7.5 kW
Drive Power (Hydraulic Unit for Retaining Clamp in Press Channel): 1.1 kW
Total Connected Load: 12.6 kW
Power Requirement: 32 A
Compression Ratio of Compacted Blocks to Original Material: approx. 50:1 (depending on material)
Block Weight After Compaction: approx. 300 kg/m³ (material dependent)
Block Dimensions: 320 x 320 mm, length variable
Throughput Capacity: approx. 100 kg/hour (depending on material)
Achievable Density: approx. 250 – 300 kg/m³
Compacted blocks are stacked approx. 1400 mm high on a pallet and wrapped with stretch film.
Machine Dimensions: approx. 4,600 x 1,400 x 1,980 mm (L x W x H)
Transport Weight (Compactor): 1,325 kg
Dkjdpfxou Thkaj Aayju

Condition of the Compactor:
The compactor was only used sporadically, is in very good condition, and available at short notice. Due to the low machine weight and forklift pockets in the transport frame, the machine is mobile and can be used directly at the material source, e.g., on the construction site. Electrical connection is via a CEE 32 A plug.

Scope of Delivery:
1 piece EPS compactor, ready for connection and operation.

Remarks:
Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagram) is available. Inspection possible by appointment. No liability is assumed for technical specifications or possible errors.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.