Baler dengan pengikat silang 8 kali lipat

Presona AB LP 80 VHK 1

Technical Data — Baler:

Manufacturer: Presona AB
Type: LP 80 VHK 1
Year of manufacture: 2012
Total operating hours (machine): 25,895 hours (as of July 2025)
Effective pump operating hours: 14,135 hours (as of July 2025)
Number of bales produced: 235,597 units (as of July 2025)
Main press force: 78.5 t
Specific pressing force: 95 N/cm²
Pre-press force: 28 t
Press chamber volume: 2.7 m³
Feed hopper dimensions: 1,500 x 1,100 mm
Theoretical throughput: 930 m³/hour
Throughput under operating conditions: 410 m³/hour
Cedsvwlqqjpfx Ad Djrh
Bale dimensions: 750 x 1,100 mm
Drive power: 55 kW
Tying: 5-fold vertical, 3-fold horizontal, fully automatic
Throughput at bulk density of:
30 kg/m³: approx. 9 to 12 t/hour, material-dependent
50 kg/m³: approx. 14 to 17 t/hour, material-dependent
100 kg/m³: approx. 16 to 25 t/hour, material-dependent
Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/hour, material-dependent
Bale weights: 450 to 600 kg, depending on material and bale length
Hydraulic oil tank volume: 1,000 L
Baler dimensions (installed with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H)
Transport dimensions (baler only): 10,985 x 2,300 x 2,900 mm
Machine weight (baler): approx. 24 t

Condition of the baler:
The machine has been partially overhauled and serviced in our workshop. After completion of the work, it was tested during live operation, both in manual and automatic mode.

The following overhaul work was carried out:
- Machine cleaned, partially derusted and partially repainted
- Hydraulic oil tank fully drained and cleaned
- Oil and air filters replaced, new hydraulic oil filled
- Press ram disassembled and cleaned
- All four running rollers on the press ram replaced
- Wire station with guide rollers for the bottom wire cleaned and made operational
- Side guides removed from press ram, smoothed, reinstalled and readjusted
- Main hydraulic cylinder removed, dismantled and inspected
- Piston rod replaced, cylinder tube honed
- Complete seal kit replaced, pressure test performed
- Hydraulic hose from main hydraulic cylinder replaced
- Vertical and horizontal needle systems for tying disassembled, cleaned, wire guide rollers made operational and maintained
- Chain cleaned, lubricated, chain tension readjusted
- Drillomat cleaned, wire knives, twister shafts and twister fingers checked, torqued, and serviced
- Door contact switches checked and partially replaced
- Emergency stop button tested
- Complete electrical wiring checked and partially renewed
- Bearings of wire guide rollers below the baler replaced
- New safety grids for vertical and horizontal tying manufactured and installed
- Machine inspected, general maintenance performed and baler tested in manual and automatic operation

Scope of delivery:
Only the baler is for sale.

Remarks:
All documentation (operating manual, CE declaration, electrical/hydraulic schematics) is complete and available. An inspection can be arranged by appointment. We assume no liability for technical specifications or possible errors.

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.