Pabrik akhir

Garant EQ 753200

Kondisi: bekas, Tahun pembuatan: 2007, de-hu-01 Iasdpovyli Ejfx Aa Njl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 1091950, de Isdpfx Aaot Dmmvs Neal

Tahun pembuatan: 1978, Kondisi: sangat baik (bekas), nomor mesin/kendaraan: 2751, General / Technical Data: Hydraulic Horizontal Internal Broaching Machine in technically good condition Manufacturer: Karl Klink Model: RIW 6.3 Machine No.: 2751 Year of manufacture: 1978 Weight: 2.3 t Pulling force: 6.3 t Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Maximum stroke: 1320 mm Maximum workpiece diameter: max. 420 mm Table opening: Ø 80 mm Ijdpfjiw Dlkox Aa Nsal Dimensions (W x D x H): approx. 5,700 mm x 600 mm x 1,900 mm Power supply: 380 Volt / 50 Hz / 4 kW Accessories / Special Equipment: - Coolant / lubricant system - Without tool feeder - Oil and chip tray (approx. 2,000 mm) Note: The machine is ideally suited for the production of keyways. Upon request, broaching tools and arbors can also be supplied. The machine is powered up and ready for demonstration in our warehouse.

Kondisi: baru, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangular 450 x 320 mm Saw band length 4250 x 34 x 1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre bandsaw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitres left + right 60° without machine conversion · 34 mm saw band width · Large, ball-bearing turntable work support · Saw band guides positioned via extra wide linear guides · Powerful, robust gearbox · Large-area clamping plates · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Freestanding control panel, safe and ergonomic Iedpfjfgyicox Aa Neal · Storage space for bands and consumables · Cutting pressure regulator, feed regulator · Fully hydraulic vise · Super fast clamping (front loading) · Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp the material 2. Start the saw 3. Rapid lowering to material start or, for serial cutting, begin cutting immediately 4. Switch off saw band 5. Raise saw frame just above material 6. Open vise Optimal, material-independent cutting results thanks to fine adjustment of the saw frame using: * Pressure control valve (cutting pressure force) * Feed control valve (speed) * Switch with pictograms, simple and clear to operate

Kondisi: baru, Tahun pembuatan: 2023, The B-Series is suitable for bending your reinforcing steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (double bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor power: 2.2 kW - 6 kW - Ideal for construction companies or on-site applications - Left and right bending possible (on BS models) - In addition to single-bend operations, bending sequences can be programmed - Inserts for different rebar diameters included in the accessories (including accessories) - Usable in automatic or manual mode - Bending capacities depend on steel strength as per table (see images) - Optionally available with digital control panel - Net weight: 215 kg - 850 kg Iajdpfom Shffsx Aa Njl Shipping: Europe-wide (self-collection also possible) If you have any questions, we will be glad to assist you!

Tahun pembuatan: 1985, Kondisi: baik (bekas), nomor mesin/kendaraan: 04.2187, Hydraulic Internal Broaching Machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 (overhauled) Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile force: 10,000 kg at 3 m/min Isdpfx Aeixntwea Njal Broaching speeds: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 30 m/min Maximum stroke: 1,200 mm Broaching tool clamping: universal pulling head for flat shanks up to 26 mm width Maximum workpiece diameter: Ø max. 480 mm (limited by oil and chip tray) Table opening: Ø 70 mm Power supply: 380 Volt / 50 Hz / 5 kW

Kondisi: baru, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw blade length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer best-in-class sawing technology and outstanding performance when cutting special steels. - The electrically-welded machine frame and the steel saw frame meet all cutting requirements, eliminating vibrations and noise. - The chip conveyor is hydraulically driven and has adjustable speed. - All machine movements (saw frame, vice, feed, and saw band guides) occur via modern linear guides with high static and dynamic load capacities, ensuring minimal sliding friction. - Another characteristic feature are the rollers for material positioning, powered by a hydraulic motor. These move perpendicular to the material to ensure optimal clamping. - Thanks to adjustable saw band height control, the operator can position the band close to the material’s top edge. After the cut, the band automatically returns to its previous position, or, optionally, can remain in the lower position. During the cutting cycle, the software compares the cutting load to the preset values, allowing the saw system to halt automatically in case of irregularities. - The saw band is cleaned by two adjustable steel brushes with hydraulic drive. - The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. - Finely ground carbide inserts securely clamp the saw band and are complete with lateral, hardened, and adjustable guide rollers. The adjustable blade guide travels automatically as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, managed by the machine software. Tension is automatically released after a preset time when the machine is idle or following a completed cycle. Iajdofg E Hpspfx Aa Nol - Automatic version with CNC control available in X-TECH 900 / 1200 models, featuring a 500 mm feed stroke, ideal for high-production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, enabling precise material positioning even at maximum load. - All guided movements are driven by four recirculating ball guides with high static and dynamic load capacities, significantly reducing feed friction. The guides are hardened, ground, and prismatic. Price on request.

Kondisi: baru, Thread diameter M3 - M16 mm Continuously variable speed up to 187 rpm Working range 180 - 2000 mm Motor power 0.7 kW Electric tapping machines for threads M3 - M16, Adjustable angle. 9 quick-change chucks with slip clutch. Settings via display: Variable speed, adjustable depth, material selection, selection of main rotation direction, thread selection. Optional: Isdpfx Ajfg U Sqja Neal Clamping table with T-slots: 990x700x800 mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jarak pergerakan sumbu X: 560 mm, jarak lintasan sumbu Y: 560 mm, jarak gerak sumbu Z: 625 mm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, daya nominal (semu): 30 kVA, torsi: 163 Nm, beban meja: 400 kg, diameter meja putar: 400 mm, kecepatan rotasi (maks.): 15.000 rpm, pasokan pendingin: 20 batang, jumlah spindel: 48, panjang alat: 300 mm, diameter alat: 70 mm, berat alat: 10 g, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Technical features: - CNC OSP P 200 - Chip conveyor - 48 tools - Full-continuous rotary table with 360,000 positions - 15,000 RPM, BT 40 spindle - Through-spindle coolant system, 20 Bar Isdpfx Aaouw Sq Ue Nsal - On-table tool presetting - Work area shower-type washing system Note: The machine has always operated with full oil, machining Teflon material.

Kondisi: bekas, CNC lathe with Y-axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i - T - Spindle nose: ASA 5 - Main spindle power: 15 kW - Self-centering diameter: 175 mm - ASA 5 spindle connection - Bar capacity: 52 mm - Turning diameter: 230 mm - Turning length: 500 mm - Max. spindle speed: 5,000 rpm - Number of tool turrets: 1 - Number of tool stations on first turret: 12 - Number of driven tool stations on first turret: 12 - First turret tooling system: VDI 30 - X-axis travel: 160 mm - Y-axis travel: ±32 mm - Z-axis travel: 550 mm - Rapid traverse rate (X/Y/Z): 30 m/min - Sub-spindle: yes - Sub-spindle nose: ASA 5 - Max. sub-spindle speed: 5,000 rpm - Sub-spindle power: 9 kW - Sub-spindle bar capacity: 30 mm - Bar loader model and brand: LNS with single bar tube - Chip conveyor: belt type - Tool presetting: yes - Year: 2000 Isdpfx Asqn E U Toa Njal The machine is in our warehouse in Gussago (BS), under power. Mimu Machine Tools Italy