Beli Hebrock Euro 3001 bekas (49)

Kondisi: bekas, hebrock-euro-3001-kantenanleimmaschine Bedpfsxdc D Rex Af Sjcu

Kondisi: bekas, Tahun pembuatan: 2016, AKV 3006 DK-F / 1 unit Edge Banding Machine AKV 3005 DK-F with pre-milling unit including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: With hot melt adhesive application to the workpiece for edge material up to 3 mm; 60 mm workpiece thickness without pre-milling unit, 40 mm with pre-milling unit; maintenance-free, coated glue pot; HF (high frequency) end trim station (16,000 rpm) for front and rear edge overhang; HF milling station (16,000 rpm) with interchangeable insert cutters (combination type) and fine adjustment from operator side; provision for additional processing units (Hebrock system); feed speed approx. 10 m/min; cutting depth adjustment for end trim saw; signal lamp for workpiece sequence; robust chain drive; ergonomically arranged operator panel; double pressure roller upper beam; unit viewing window from machine rear and operator’s side; PLC control with touchscreen. Technical Data: Feed speed 10 m/min. Panel thicknesses from 8–40 mm. Weight: depending on configuration approx. 1550 kg. Dimensions (L x W x H): 5250 x 1445 x 1600 mm. Airtronic incl. cooling and antistatic spray device, 2014 model. 1 unit hot air aggregate for producing an optical zero joint using specially suited edging materials. Includes: pneumatic glue pot positioning; cooling and antistatic spray equipment; 2 additional quick-change edge channels; special version corner rounding cutter max. workpiece thickness 60 mm, minimum workpiece length 200 mm (for Hebrock edge banders series 3000 only; retrofits possible – additional cost upon request). Technical Data: max. panel thickness 40 mm; max. edge thickness 1.2–2.0 mm; feed speed 7–10 m/min; air consumption approx. 280–580 l/min (Airtronic only), electronically controlled; ready for operation in approx. 2 min. Special version minimum workpiece thickness 8 mm. Bcjdpfxoygkfpo Af Sju 1 unit Airtronic retrofit for PLC-controlled machines upon request. 1 unit retrofit only possible at factory in Hüllhorst-Oberbauerschaft. Upgrade to 8 mm edge thickness available up to a maximum workpiece thickness of 40 mm, including pneumatic saw adjustment. Special infeed fence for stacked panels, 1 unit for 16 mm and 19 mm thicknesses, max. overhang of edge 8 mm. Separate pneumatic cutter adjustment, 1 unit, operator panel controlled (straight/radius). Buffing station (mop), 1 unit. Corner rounding cutter, 1 unit incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness 40 mm, min. piece length 300 mm, radius R 2.0 mm. Ball bearing for corner rounding cutter 24.1 mm, 1 unit; ball bearing 24.2 mm, 1 unit. Corner rounding cutter for 60 mm workpiece thickness, 1 unit. Quick change mechanism for corner rounding cutter, 1 unit. Exchange motor 0.37 kW for corner rounding cutter, 1 unit incl. terminal box with screwed electrical connector, two pneumatic quick couplers, motor plate and short stroke cylinder, or alternatively SIKO counter, incl. cutter R 1.0 mm. Ball bearing for corner rounding cutter 24.1 mm, 1 unit; ball bearing 24.2 mm, 1 unit. Radius scraper, 1 unit incl. pneumatic lift-out device, radius R 2.0 mm. Radius scraper, 1 unit incl. pneumatic lift-out device, radius R 1.0 mm. Surface scraper, 1 unit with pneumatic control. Glue station change system incl. downward glue discharge device in preparation, 1 unit (without second glue pot), with ability to...

Kondisi: bekas, Tahun pembuatan: 2014, Lokasi gudang: Pemasok Bjdpfx Asyfp N Dsf Secu

Kondisi: bekas, Tahun pembuatan: 2018, Edge banding machine AKV 3006 DK - F with jointing cutter unit, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: - Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm - Max. workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable cutter (combination design) and fine cutter adjustment from the operator side - Spaces available for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view window from both rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg, depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment, 1 pc. Toggle between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is done manually via the stop flap in the machine. Buffing station (polishing mop): 1 pc Corner rounding cutter: 1 pc, including combination tool and pneumatic setting for chamfer/radius. Maximum workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper: 1 pc, including pneumatic lift device, radius R 2.0 mm. Bcsdpfx Afoxfh Tms Sju Flat scraper: 1 pc, with pneumatic control. Glue pot quick-change system, including second glue pot and downward glue outlet, 1 pc for quick color change. Grooving saw unit, horizontal into the edge, 1 pc, including pneumatic lift device and grooving tool. Separate extraction for jointing unit, 1 pc, directly at the jointing unit, vertically upward, d=80 mm for optimal extraction; strongly recommended from model AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ball bearing for corner rounding cutter 24.2 mm, 1 pc Interchangeable motor 0.37 kW for corner rounding cutter, 1 pc, with quick-change device incl. radius cutter R 1. Interchangeable spindles, 1 set = 2 pcs, 1 set Quick change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim.

Kondisi: bekas, Tahun pembuatan: 2018, 1 Bcodpfoygm Dzjx Af Sju

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Bcsdexyiilepfx Af Seu

Kondisi: bekas, Tahun pembuatan: 1996, Arah pergerakan pelat: dari operator ke kiri. Ketebalan edging maksimal: 8,0 mm. Lebar benda kerja minimum: 70 mm. Kecepatan feeding: 11 m/menit. Waktu pemanasan: 4,5 menit. Majalah roll otomatis: Ya. Gunting potong hingga: 0,2 - 3,0 mm. Pemasukan edging satuan: Ya. Lem otomatis: Bak lem dengan granul di atas. Gergaji pemotong: tetap 90°. Unit frais rata: Ya. Unit frais kombinasi: Ya. Indikasi unit: Indikator posisi. Jenis kontrol: manual. Pengoperasian: Sakelar pemilih / tombol tekan. Fasilitas penggerak: Tidak. Penutup pelindung: Ya. Tinggi kerja / tinggi meja input: 870 mm. Berat kira-kira: 670 kg. Dimensi: 3600 x 1400 x 1200 mm. Daya motor: 11 kW. Diameter koneksi ekstraksi: 120 mm. Lokasi penyimpanan: Pemasok. Bedpfsxwdp Ujx Af Sscu

Kondisi: bekas, Tahun pembuatan: 2015, de-en Bedpfx Aeydqg Ief Socu

Kondisi: bekas, Tahun pembuatan: 2018, Edgebanding machine AKV 3006 DK - F with jointing milling unit, including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station for radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edgebanding material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutter (combination version) and cutter fine adjustment from the operator side - Spare positions for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment for the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregates viewing window from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1,550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic system including cooling and anti-static spray device, year 2014 1 pc. hot air unit for creating the optical zero-joint, for special edgebanding materials - Including pneumatic glue pot positioning - Including cooling and anti-static spray device - Including 2 additional quick-change edge channels - Including special version corner rounding cutter, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanding machines of the 3000 series (retrofit option available on request, extra cost) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min - Upgraded for 8 mm edge thickness, 1 pc. to maximum 40 mm workpiece thickness - Including pneumatic saw adjustment, special version, min. workpiece thickness 8 mm - 1 pc. 3-point pneumatic cutter adjustment - 1 pc. switching for radius/chamfer/flush for combination milling stations (eliminates manual adjustment at the combination milling station for the 3rd reference point, PLC control mandatory) Polishing station (buffing) - 1 pc. corner rounding cutter, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm Radius scraper - 1 pc. including pneumatic lift-off device, radius R 2.0 mm Flat scraper - 1 pc. with pneumatic actuation control Chassis, complete - 1 pc. glue station change system, including downward-facing glue discharge device (preparation only), no 2nd glue pot, machine is suitable for processing PUR adhesive Grooving saw unit, vertical, into the panel - 1 pc. including pneumatic lift-off device - Vertical groove Bcodpfx Afex S Hmze Seu - Groove width 8.2 mm - Groove depth 8.0 mm - Distance from workpiece edge 14.0 mm - Special version grooving saw motor with increased power - 1 pc. exhaust extraction for jointing unit (connected to the machine's extractor manifold) Ball bearings for corner rounding cutter: 24.1 mm (1 pc.), 24.2 mm (1 pc.) Protective spray device - 1 pc. for the edge surface for sensitive edgebanding materials Spray device for panel, combined (release agent and cleaning agent spray device) Location: Suppli

Kondisi: bekas, Tahun pembuatan: 2010, panjang total: 5.250 mm, tinggi total: 1.780 mm, lebar total: 1.060 mm, de-01 Bcjdpfx Afowp D Uds Ssu

Kondisi: bekas, Tahun pembuatan: 1992, Mesin bekas Tahun pembuatan: 1992 Tinggi benda kerja maks. sekitar 40 mm Panjang benda kerja min. sekitar 250 mm Lebar benda kerja min. sekitar 70 mm Kecepatan pengumpan sekitar 11 m/menit Siap operasi dalam sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan tangki lem pemanas cepat Pemotongan roll secara pneumatik hingga 3 mm Dengan gergaji potong hingga ketebalan pinggiran 5 mm Dengan stasiun fraisasi, opsional dilengkapi dengan pisau frais sisip kombinasi untuk pemrosesan radius, lurus, dan chamfer Penopang yang bisa dilipat dan dapat ditarik ke arah depan Dengan sasis P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim Bsdpfjx Rr Dvjx Af Sjcu

Kondisi: bekas, Edge bander Hebrock AKV 3005, peralatan lengkap, dapat diuji sebelum pembelian, Cairan sebelum pisau penggilingan, Pisau penggilingan awal, Aplikasi lem dengan rol, dilengkapi pembuangan lem, Panci lem kedua termasuk, Gunting pneumatik awal, Roll penekan, Gergaji potong akhir, Unit penggilingan atas-bawah, R1 – R2 dapat disetel secara pneumatik, Bcodpfxsw I Sp So Af Ssu Pisau siklin profil, Unit pembentukan sudut, Cairan sebelum pisau siklin, Pisau siklin datar, Polisher, Maks. tebal edging roll 3mm, Maks. tebal edging lem 12mm, mesin dalam kondisi sangat baik.

Kondisi: sangat baik (bekas), Edge bander Hebrock 3003 Well equipped, available for inspection before purchase PRE-MILLING cutters Zero joint AirTronic system – adhesive-free hot air technology Glue application by roller Pneumatic pre-cutting guillotine Pressure rollers Anti-adhesive fluids Finishing saw for trimming edges Top/bottom milling unit, R1 – R2 radius changeover pneumatic Pneumatic corner rounding unit Bedjwmc I Dopfx Af Secu Flat scraper Max. workpiece height: 50mm Max. edge material thickness (in roll): 3mm Feed speed: 10m/min Power requirement: 15.8kW Condition: Very good, fully operational and functional

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent Bodpfx Aslht Hwsf Secu F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis Bcedpfxoi Am U Dj Af Sou F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Bodjlht Hzspfx Af Socu

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Bodjhqadcspfx Af Sscu Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – Bedsi Am Ukopfx Af Sjcu - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Bcjdpfx Afji Anads Sou

Kondisi: bekas, Tahun pembuatan: 1994, Mesin penempel tepian (edge banding machine) Produsen: Hebrock Tipe: AKV 2001 DK Tahun pembuatan: 1995 Bcjdpfxjx Tcbqs Af Ssu Sertifikasi tipe CE Tersertifikasi debu kayu GS Lebar benda kerja minimal: 70 mm Panjang benda kerja minimal: 300 mm Tinggi benda kerja min. - maks.: 8 - 50 mm Ketebalan tepi min. - maks.: 0,4 - 8 mm Kecepatan umpan: 11 m/menit Penggaris masukan berpemanas Pipa angin tekan baru Unit gergaji potong Unit frais rata dan radius Wadah lem leleh Piring penyangga Pemotongan rol pneumatis hingga ketebalan tepi 3 mm Unit frais rata dengan kepala pisau ganda untuk penggerindaan radius, lurus, dan serong Koneksi hisap D 140 mm Koneksi listrik 380/50 Volt / Hz Daya koneksi total 12 kW Berat sekitar 550 kg

Kondisi: bekas, Tahun pembuatan: 2016, de-en-001 Bodsx Tct Hjpfx Af Secu

Kondisi: sangat baik (bekas), Mesin Edge Banding Hebrock F4 Lengkap dengan banyak fitur, dapat diuji sebelum pembelian, Pisau frais awal, Aplikasi lem dengan roller, Dilengkapi katup pembuangan lem, Panci lem yang dapat diganti, Gunting pneumatik awal, Roll penekan, Gergaji potong akhir, Unit frais atas-bawah, R1 – R2 diatur secara pneumatik, Scraper profil, Unit pembuat sudut tumpul yang diatur secara pneumatik, Scraper datar, Paket nesting, Tinggi maksimal elemen: 45 mm, Bodpoxq A Ebefx Af Sjcu Ketebalan maksimal edging rol: 3 mm, Kecepatan feeding: 7 m/menit, Kapasitas daya listrik: 7,4 kW, Mesin sudah dicek, siap uji, kondisi sangat baik. Hanya 15.000 meter waktu kerja.

Kondisi: baru, ebrock Model F 2 next Bcjdpjl D Rp Eefx Af Sju Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. The 3.3 m long F 2 is not only affordable and space-saving. It also offers the features you need to process perfect edges from the start: diamond-tipped jointing cutters ensure excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm Jointing cutter (incl. Dia - tool) for cutting depths up to 2 mm Maintenance-free glue pot with quick-change reservoir system incl. glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version) Robust chain feed Ball-bearing double pressure rollers Viewing window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Hebrock AKV 3003 DK-F ini diproduksi pada tahun 2002. Mesin edge bander yang kokoh dengan total daya 10,5 kW, beroperasi pada 230/400 V dan 50 Hz. Ideal untuk proses edge banding yang efisien. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Bodpfsx E Eayox Af Sscu Jenis Aplikasi Edge Banding

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Maks. tinggi benda kerja sekitar 40 mm Min. panjang benda kerja sekitar 250 mm Min. lebar benda kerja sekitar 70 mm Bcodpjwka Tlofx Af Sju Kecepatan pemajuan sekitar 11 m/menit Siap operasi dalam waktu sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan penggaris masukan berpemanas Dengan wadah lem pemanas cepat Pemotongan rol pneumatis hingga 3 mm Dengan gergaji potong hingga ketebalan tepi 5 mm Dilengkapi stasiun milling opsional dengan pisau insert kombinasi untuk milling radius, lurus, dan chamfer Lengan penyangga dapat dilipat dan ditarik ke depan Dengan sasis Dengan sistem ekstraksi terintegrasi P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim