Beli Hebrock Euro 1000 bekas (52)

Kondisi: baik (bekas), Tahun pembuatan: 2005, mesin edge banding bekas Hebrock EURO 2000 tahun pembuatan 2005 dengan indikator lem leleh pada benda kerja untuk material tepi hingga 3 mm, tangki lem berlapis yang bebas perawatan, stasiun pemotongan HF (300 Hz) Djdpfx Aex Sxcnjdgekg untuk overhang tepi depan dan belakang, stasiun milling HF (300 Hz) dengan pisau ganti tipe kombinasi dan pengaturan halus dari sisi operator panel kontrol ergonomis, penyangga benda kerja yang dapat ditarik keluar, kecepatan pengumpanan ±10 m/menit. penggaris masuk berpemanas penyesuaian milling pneumatik terpisah (lurus/radius) sasis beroda

Kondisi: bekas, hebrock-euro-3001-kantenanleimmaschine Dkodpfxjxdc D Ro Adgsg

Tahun pembuatan: 1995, Kondisi: siap digunakan (bekas), nomor mesin/kendaraan: 585, Marke: Hebrock Modell: AKV 1000 V Maschinen-Nr.: 585 Baujahr: 1995 Technische Daten: Kantenbandstärke max.: 3 mm Kantenbandhöhe max.: 50 mm Vorschubgeschwindigkeit max.: 7,5 m/min Mit Schneidmesser Dedpfxoib H Slj Adgekg Arbeitstischlänge: 2.200 mm Motor: 7 kW, 50 Hz, 230/400 V, 3-phasig Transportmaße: Länge: 220 cm Breite: 115 cm Höhe: 150 cm Lager-Nr.: 2001164BXM

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, Data Teknis ketebalan tepi maks.: 5 mm / 8 mm ketinggian benda kerja maks.: sekitar 40 mm / 50 mm panjang benda kerja min.: sekitar 250 mm / 300 mm lebar benda kerja min.: sekitar 70 mm kecepatan pemajuan: sekitar 11 m/menit (dapat diatur tanpa tahap) siap operasi dalam: sekitar 4,5 menit Dkjdpfjx S Etgox Adgjg daya listrik: sekitar 9,5 kW sambungan listrik: 400 V 50Hz tinggi meja kerja: 900 mm dimensi (P × L × T): 3300 × 1400 × 1300 mm berat: sekitar 550 kg Kondisi: Mesin dalam kondisi berfungsi penuh, selalu dirawat dengan baik, dan siap digunakan segera. Inspeksi dan uji coba dapat dilakukan kapan saja.

Kondisi: bekas, Tahun pembuatan: 2018, Edgebanding machine AKV 3006 DK - F with jointing milling unit, including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station for radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edgebanding material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutter (combination version) and cutter fine adjustment from the operator side - Spare positions for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment for the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregates viewing window from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm Dkjdpfx Ajx S Hmzjdgeg - Weight: approx. 1,550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic system including cooling and anti-static spray device, year 2014 1 pc. hot air unit for creating the optical zero-joint, for special edgebanding materials - Including pneumatic glue pot positioning - Including cooling and anti-static spray device - Including 2 additional quick-change edge channels - Including special version corner rounding cutter, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanding machines of the 3000 series (retrofit option available on request, extra cost) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min - Upgraded for 8 mm edge thickness, 1 pc. to maximum 40 mm workpiece thickness - Including pneumatic saw adjustment, special version, min. workpiece thickness 8 mm - 1 pc. 3-point pneumatic cutter adjustment - 1 pc. switching for radius/chamfer/flush for combination milling stations (eliminates manual adjustment at the combination milling station for the 3rd reference point, PLC control mandatory) Polishing station (buffing) - 1 pc. corner rounding cutter, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm Radius scraper - 1 pc. including pneumatic lift-off device, radius R 2.0 mm Flat scraper - 1 pc. with pneumatic actuation control Chassis, complete - 1 pc. glue station change system, including downward-facing glue discharge device (preparation only), no 2nd glue pot, machine is suitable for processing PUR adhesive Grooving saw unit, vertical, into the panel - 1 pc. including pneumatic lift-off device - Vertical groove - Groove width 8.2 mm - Groove depth 8.0 mm - Distance from workpiece edge 14.0 mm - Special version grooving saw motor with increased power - 1 pc. exhaust extraction for jointing unit (connected to the machine's extractor manifold) Ball bearings for corner rounding cutter: 24.1 mm (1 pc.), 24.2 mm (1 pc.) Protective spray device - 1 pc. for the edge surface for sensitive edgebanding materials Spray device for panel, combined (release agent and cleaning agent spray device) Location: Suppli

Kondisi: bekas, Tahun pembuatan: 2010, panjang total: 5.250 mm, tinggi total: 1.780 mm, lebar total: 1.060 mm, de-01 Dedpowp D Udofx Adgskg

Kondisi: bekas, Tahun pembuatan: 1992, Mesin bekas Tahun pembuatan: 1992 Tinggi benda kerja maks. sekitar 40 mm Panjang benda kerja min. sekitar 250 mm Lebar benda kerja min. sekitar 70 mm Kecepatan pengumpan sekitar 11 m/menit Siap operasi dalam sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan tangki lem pemanas cepat Pemotongan roll secara pneumatik hingga 3 mm Dengan gergaji potong hingga ketebalan pinggiran 5 mm Dengan stasiun fraisasi, opsional dilengkapi dengan pisau frais sisip kombinasi untuk pemrosesan radius, lurus, dan chamfer Dkjdpsx Rr Dvsfx Adgsg Penopang yang bisa dilipat dan dapat ditarik ke arah depan Dengan sasis P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: sangat baik (bekas), Mesin Edge Banding Hebrock F4 Dkjdpexq A Ebjfx Adgjg Lengkap dengan banyak fitur, dapat diuji sebelum pembelian, Pisau frais awal, Aplikasi lem dengan roller, Dilengkapi katup pembuangan lem, Panci lem yang dapat diganti, Gunting pneumatik awal, Roll penekan, Gergaji potong akhir, Unit frais atas-bawah, R1 – R2 diatur secara pneumatik, Scraper profil, Unit pembuat sudut tumpul yang diatur secara pneumatik, Scraper datar, Paket nesting, Tinggi maksimal elemen: 45 mm, Ketebalan maksimal edging rol: 3 mm, Kecepatan feeding: 7 m/menit, Kapasitas daya listrik: 7,4 kW, Mesin sudah dicek, siap uji, kondisi sangat baik. Hanya 15.000 meter waktu kerja.

Kondisi: baru, ebrock Djdpfel D Rp Eex Adgskg Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. The 3.3 m long F 2 is not only affordable and space-saving. It also offers the features you need to process perfect edges from the start: diamond-tipped jointing cutters ensure excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm Jointing cutter (incl. Dia - tool) for cutting depths up to 2 mm Maintenance-free glue pot with quick-change reservoir system incl. glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version) Robust chain feed Ball-bearing double pressure rollers Viewing window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: bekas, Tahun pembuatan: 2018, 1 Dkedpjx Rdm Aefx Adgeg

Kondisi: bekas, Tahun pembuatan: 2018, Edge banding machine AKV 3006 DK - F with jointing cutter unit, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: - Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm - Max. workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable cutter (combination design) and fine cutter adjustment from the operator side - Spaces available for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view window from both rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg, depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment, 1 pc. Toggle between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is done manually via the stop flap in the machine. Buffing station (polishing mop): 1 pc Corner rounding cutter: 1 pc, including combination tool and pneumatic setting for chamfer/radius. Maximum workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper: 1 pc, including pneumatic lift device, radius R 2.0 mm. Flat scraper: 1 pc, with pneumatic control. Glue pot quick-change system, including second glue pot and downward glue outlet, 1 pc for quick color change. Grooving saw unit, horizontal into the edge, 1 pc, including pneumatic lift device and grooving tool. Separate extraction for jointing unit, 1 pc, directly at the jointing unit, vertically upward, d=80 mm for optimal extraction; strongly recommended from model AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ball bearing for corner rounding cutter 24.2 mm, 1 pc Interchangeable motor 0.37 kW for corner rounding cutter, 1 pc, with quick-change device incl. radius cutter R 1. Djdpexfh Tmjfx Adgekg Interchangeable spindles, 1 set = 2 pcs, 1 set Quick change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Hebrock AKV 3003 DK-F ini diproduksi pada tahun 2002. Mesin edge bander yang kokoh dengan total daya 10,5 kW, beroperasi pada 230/400 V dan 50 Hz. Ideal untuk proses edge banding yang efisien. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Dsdpfx Adox E Eayogokg Edge Banding

Kondisi: bekas, Tahun pembuatan: 2015, used_machine_2015_hessen Dedsx Enqhepfx Adgekg

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 952 h, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, daya: 7,8 kW (10,61 hp), arus masuk: 21 A, frekuensi input: 50 Hz, Kami menawarkan mesin edge banding bekas Hebrock F 5, tahun produksi 2021. Tegangan: 400 V Frekuensi: 50 Hz Arus: 21,7 A Daya: 7,8 kW Tahun produksi: 2021 Dkjdox Nkfvjpfx Adgsg Nomor mesin: F2965 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: bekas, Tahun pembuatan: 2012, de-to-hu-01 Dkjdpfx Adewnhb Ssgeg

Kondisi: bekas, Tahun pembuatan: 2016, 1 Dkjdpsx Hwq Tsfx Adgeg

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Lokasi penyimpanan: Nattheim Dkodjxyiiljpfx Adgsg

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Hebrock TOP 2000 PLUS ini diproduksi pada tahun 2015. Mesin edge banding bekas ini dilengkapi dengan unit lem, unit pemotong, dan unit profil kombinasi. Dapat memproses material edging dengan ketebalan 0,5 hingga 3 mm serta benda kerja dengan ketebalan 10 hingga 45 mm. Cocok untuk pekerjaan finishing edge yang presisi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Dedpfx Aox D Nlbodgekg Jenis Aplikasi Edge Banding

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Maks. tinggi benda kerja sekitar 40 mm Min. panjang benda kerja sekitar 250 mm Min. lebar benda kerja sekitar 70 mm Kecepatan pemajuan sekitar 11 m/menit Siap operasi dalam waktu sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan penggaris masukan berpemanas Dodpfjwka Tlex Adgskg Dengan wadah lem pemanas cepat Pemotongan rol pneumatis hingga 3 mm Dengan gergaji potong hingga ketebalan tepi 5 mm Dilengkapi stasiun milling opsional dengan pisau insert kombinasi untuk milling radius, lurus, dan chamfer Lengan penyangga dapat dilipat dan ditarik ke depan Dengan sasis Dengan sistem ekstraksi terintegrasi P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, tinggi kerja: 900 mm, kebutuhan tinggi: 1.400 mm, persyaratan ruang panjang: 4.050 mm, lebar yang dibutuhkan: 1.300 mm, tekanan kerja: 7 batang, with PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm with special materials such as multiplex); maintenance-free glue pot with quick-change facility including glue discharge device; HF cross-cut saw station (approx. 12,000 rpm); HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combination version); corner rounding unit; surface scraper (including pneumatic lift); robust chain feed; ball bearing mounted double roller top pressure; inspection window on the rear side of the machine; extendable workpiece support; feed speed approx. 10 m/min. Complete with quick-change facility for corner rounding unit, radius scraper (including pneumatic lift), undercarriage. F 4 – Technical Specifications Max. edge thickness: 3 mm Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min. Ready for operation: approx. 3.5 min. Max. total connected load: ∅ approx. 7.4 kW Dkjdpfsx E N Nfsx Adgjg Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Dust extraction port: ∅ 1 x 140 mm

Kondisi: baru, Tahun pembuatan: 2024, IN STOCK!!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm Djdsglfwtopfx Adgjkg Edge banding machine with PLC control Jointing unit (incl. DIA tool) up to 2 mm milling depth Combination milling head Radius milling R=2 mm Corner rounding unit R=2 mm Radius scraper blade R=2 mm

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Dsdpfxjlht Hwj Adgskg Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: bekas, Tahun pembuatan: 1996, Arah gerak pelat: dari operator ke kiri Ketebalan maksimal edge tape: 8,0 mm Lebar benda kerja minimum: 70 mm Kecepatan umpan: 11 m/menit Waktu pemanasan: 4,5 menit Majalah rol otomatis: Ya Gunting potong sampai: 0,2 - 3,0 mm Pemasukan tepi secara individu: Ya Perekat otomatis: baskom lem dengan granulat di atas Gergaji potong: tetap 90° Unit frais rata: Ya Unit frais kombinasi: Ya Tampilan unit: tampilan unit Jenis kontrol: manual Pengoperasian: sakelar pilih/tombol tekan Perangkat penggerak: Ya Tudung pelindung: Ya Tinggi kerja atau tinggi meja input: 870 mm Berat sekitar: 670 kg Djdexwdp Ujpfx Adgskg Dimensi: 3600 x 1400 x 1200 mm Daya motor: 11 kW Diameter hisap: 120 mm Lokasi penyimpanan: pemasok

Kondisi: baru, Tahun pembuatan: 2024, ENGLISH IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination rounding head Radius cutter R=2 mm Corner radius cutter R=2 mm Radius scraper R=2 mm Dedpfx Aohymgdjdgekg

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Dksdpfelht Hzex Adgjg