Beli Hebrock Euro 2000 bekas (49)

Kondisi: bekas, Tahun pembuatan: 1996, Arah gerak pelat: dari operator ke kiri Ketebalan maksimal edge tape: 8,0 mm Lebar benda kerja minimum: 70 mm Kecepatan umpan: 11 m/menit Waktu pemanasan: 4,5 menit Majalah rol otomatis: Ya Gunting potong sampai: 0,2 - 3,0 mm Pemasukan tepi secara individu: Ya Perekat otomatis: baskom lem dengan granulat di atas Gergaji potong: tetap 90° Unit frais rata: Ya Ljdjxwdp Uopfx Aahjta Unit frais kombinasi: Ya Tampilan unit: tampilan unit Jenis kontrol: manual Pengoperasian: sakelar pilih/tombol tekan Perangkat penggerak: Ya Tudung pelindung: Ya Tinggi kerja atau tinggi meja input: 870 mm Berat sekitar: 670 kg Dimensi: 3600 x 1400 x 1200 mm Daya motor: 11 kW Diameter hisap: 120 mm Lokasi penyimpanan: pemasok

Kondisi: bekas, hebrock-euro-3001-kantenanleimmaschine Ledoxdc D Repfx Aahota

Kondisi: bekas, Tahun pembuatan: 1991, Mesin bekas Tahun pembuatan: 1991 Maks. tinggi benda kerja sekitar 40 mm Ljdpfowka Tljx Aahsta Min. panjang benda kerja sekitar 250 mm Min. lebar benda kerja sekitar 70 mm Kecepatan pemajuan sekitar 11 m/menit Siap operasi dalam waktu sekitar 4-5 menit Daya terpasang sekitar 11 kW Dengan penggaris masukan berpemanas Dengan wadah lem pemanas cepat Pemotongan rol pneumatis hingga 3 mm Dengan gergaji potong hingga ketebalan tepi 5 mm Dilengkapi stasiun milling opsional dengan pisau insert kombinasi untuk milling radius, lurus, dan chamfer Lengan penyangga dapat dilipat dan ditarik ke depan Dengan sasis Dengan sistem ekstraksi terintegrasi P x L x T 3600 x 1400 x 1200 mm Berat sekitar 670 kg Ketersediaan: segera Lokasi: Flörsheim

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, Hebrock TOP 2000 PLUS ini diproduksi pada tahun 2015. Mesin edge banding bekas ini dilengkapi dengan unit lem, unit pemotong, dan unit profil kombinasi. Dapat memproses material edging dengan ketebalan 0,5 hingga 3 mm serta benda kerja dengan ketebalan 10 hingga 45 mm. Cocok untuk pekerjaan finishing edge yang presisi. Hubungi kami untuk informasi lebih lanjut tentang mesin ini. Jenis Aplikasi Lodpfx Aaex D Nlbjhjta Edge Banding

Tahun pembuatan: 1998, Kondisi: siap digunakan (bekas), A right-hand edge banding machine by Hebrock is available. Workpiece thickness range: 10mm–50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (coil material): 0.5mm–5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions (L/W/H): approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. An on-site inspection is possible. Ledpow A R S Nefx Aahjta

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Ljdpfxjxyiilo Aahjta Lokasi penyimpanan: Nattheim

Kondisi: baru, ebrock Model F 2 next Ltsdpfx Asl D Rp Esahoa Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. The 3.3 m long F 2 is not only affordable and space-saving. It also offers the features you need to process perfect edges from the start: diamond-tipped jointing cutters ensure excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm Jointing cutter (incl. Dia - tool) for cutting depths up to 2 mm Maintenance-free glue pot with quick-change reservoir system incl. glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version) Robust chain feed Ball-bearing double pressure rollers Viewing window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2002, Hebrock AKV 3003 DK-F ini diproduksi pada tahun 2002. Mesin edge bander yang kokoh dengan total daya 10,5 kW, beroperasi pada 230/400 V dan 50 Hz. Ideal untuk proses edge banding yang efisien. Hubungi kami untuk informasi lebih lanjut mengenai mesin ini. Jenis Aplikasi Lsdpfjx E Eayox Aaheta Edge Banding

Kondisi: bekas, Tahun pembuatan: 2021, jam operasional: 952 h, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, jenis penyesuaian ketinggian: mekanis, tegangan masuk: 400 V, daya: 7,8 kW (10,61 hp), arus masuk: 21 A, frekuensi input: 50 Hz, Kami menawarkan mesin edge banding bekas Hebrock F 5, tahun produksi 2021. Tegangan: 400 V Frekuensi: 50 Hz Arus: 21,7 A Ltedpfx Asx Nkfvsahja Daya: 7,8 kW Tahun produksi: 2021 Nomor mesin: F2965 Jika Anda memiliki pertanyaan atau membutuhkan informasi lebih lanjut, silakan kirim pesan kepada kami atau hubungi kami.

Kondisi: bekas, Tahun pembuatan: 2015, used_machine_2015_hessen Lsdpox Enqhofx Aahota

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jam operasional: 730 h, Edgebanding machine Hebrock AKV3005DK-F with jointing, corner rounding, and double scraper units. Very well-maintained machine from a small business, in excellent condition. Touch-screen interface with PLC control for simple operation, allowing storage of up to 12 programs. Edge thickness (roll): approx. 0.4 – 3 mm Workpiece height: approx. 8 – 53 mm Feed speed: approx. 10 m/min Noise reduction hood Extendable workpiece support, special version extendable up to 950 mm Extraction connection: 80 + 140 mm Units/Aggregates: Quick-change glue pot with glue outlet, two glue pots included (one has been used for EVA adhesive, one for PU adhesive; the PU glue pot is nearly new and was only purchased for a specific job). Manual pressure adjustment with SIKO counter Manual infeed fence adjustment with SIKO counter Manual edge thickness adjustment with SIKO counter Joint milling unit with Leitz Whispercut DIA cutters, still sharp Gluing unit with automatic edge feeding for coil material up to 3 mm Pressure zone with 4 rollers End trimming saw Integrated edge scrap container Combination milling unit R2 with pneumatic switching for thin and thick edges Corner rounding unit R2, pneumatically adjustable for thin and thick edges The contour milling unit can also be used in shelf program mode, i.e., only the straight edge is rounded, not the corners. Radius scraper R2, pneumatically retractable Glue joint scraper, pneumatically retractable Hood interlock CE marking Operating manual Ledpfjtpn Etjx Aahota A video of the running machine can be sent upon request. All turn plates for the milling and scraper units have been renewed or rotated; saws have been sharpened. The machine is ready for immediate use. Only the joint DIA cutters (Whispercut) have not been renewed but are still sharp. Paint damage has been touched up. The Hebrock AKV series is the predecessor of the current K series. The machine has only approx. 730 operating hours (glue pot on), and the frequency inverters have only been powered for approx. 455 hours. The machine is in very good condition; see original photos. Machine dimensions (LxWxH): approx. 5000 x 1400 x 1550 mm Weight: approx. 1550 kg The machine can be demonstrated at our site by appointment. We only offer machines that are ready for demonstration in our warehouse, see “more offers from this seller.”

Kondisi: bekas, Tahun pembuatan: 2016, 1 Ltjdpfx Aex Hwq Teahea

Kondisi: bekas, Tahun pembuatan: 2010, panjang total: 5.250 mm, tinggi total: 1.780 mm, lebar total: 1.060 mm, de-01 Ltodswp D Udspfx Aahsa

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, tinggi benda kerja (maks.): 50 mm, ketebalan tepi (maks.): 3 mm, tinggi kerja: 900 mm, kebutuhan tinggi: 1.400 mm, persyaratan ruang panjang: 4.050 mm, lebar yang dibutuhkan: 1.300 mm, tekanan kerja: 7 batang, with PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm: jointing cutter (including DIA tool), up to 2 mm milling depth (max. 1 mm with special materials such as multiplex); maintenance-free glue pot with quick-change facility including glue discharge device; HF cross-cut saw station (approx. 12,000 rpm); HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter head (combination version); corner rounding unit; surface scraper (including pneumatic lift); robust chain feed; ball bearing mounted double roller top pressure; inspection window on the rear side of the machine; extendable workpiece support; feed speed approx. 10 m/min. Complete with quick-change facility for corner rounding unit, radius scraper (including pneumatic lift), undercarriage. F 4 – Technical Specifications Max. edge thickness: 3 mm Lsdpfxox E N Nfe Aahjta Min. / Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: 7 m/min. Ready for operation: approx. 3.5 min. Max. total connected load: ∅ approx. 7.4 kW Electrical connection: 400 V / 3 Ph / 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (L x W x H) Weight: approx. 820 kg Dust extraction port: ∅ 1 x 140 mm

Kondisi: baru, Tahun pembuatan: 2024, IN STOCK!!!! Lsdpfxeglfwto Aahjta Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 10 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm Edge banding machine with PLC control Jointing unit (incl. DIA tool) up to 2 mm milling depth Combination milling head Radius milling R=2 mm Corner rounding unit R=2 mm Radius scraper blade R=2 mm

Kondisi: bekas, Tahun pembuatan: 2018, Edge banding machine AKV 3006 DK - F with jointing cutter unit, including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station, radius R 2.5 mm. Technical Description: - Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm - Max. workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF end-trimming unit (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable cutter (combination design) and fine cutter adjustment from the operator side - Spaces available for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Cutting depth adjustment for cross-cut saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view window from both rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thickness: 8 - 40 mm - Weight: approx. 1550 kg, depending on equipment - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment, 1 pc. Toggle between radius – flush/chamfer for combination milling stations. Switching between chamfer or flush is done manually via the stop flap in the machine. Buffing station (polishing mop): 1 pc Corner rounding cutter: 1 pc, including combination tool and pneumatic setting for chamfer/radius. Maximum workpiece thickness 40 mm. Minimum workpiece length 300 mm. Radius R 2.0 mm. Radius scraper: 1 pc, including pneumatic lift device, radius R 2.0 mm. Flat scraper: 1 pc, with pneumatic control. Glue pot quick-change system, including second glue pot and downward glue outlet, 1 pc for quick color change. Grooving saw unit, horizontal into the edge, 1 pc, including pneumatic lift device and grooving tool. Separate extraction for jointing unit, 1 pc, directly at the jointing unit, vertically upward, d=80 mm for optimal extraction; strongly recommended from model AKV 3005 DK-F onwards. Ball bearing for corner rounding cutter 24.1 mm, 1 pc Ltsdpfx Ajxfh Tmeahsa Ball bearing for corner rounding cutter 24.2 mm, 1 pc Interchangeable motor 0.37 kW for corner rounding cutter, 1 pc, with quick-change device incl. radius cutter R 1. Interchangeable spindles, 1 set = 2 pcs, 1 set Quick change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hr Storage location: Nattheim.

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup Ljdslht Hwjpfx Aahsta F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 2459, Mesin dalam kondisi sangat baik - panel kontrol sangat mudah dibaca - lebar benda kerja minimum sekitar 80 mm - panjang benda kerja minimum sekitar 200 mm - kecepatan pengumpanan sekitar 10 m/menit - rantai pengangkut dengan pelat rantai khusus yang terpasang permanen - penekan atas dengan dua rol - panjang mesin 4300 mm Ledpfex Ahmujx Aahsta - lebar mesin 1400 mm - berat sekitar 1250 kg - meja penyangga benda kerja depan dapat ditarik keluar - pelumas sentral otomatis untuk gergaji potong & mesin frais sudut - tangki lem leleh dilapisi teflon (sangat rendah perawatan) - siap operasi dalam waktu sekitar 5 - 6 menit - unit penambahan tepi - pemotongan dengan rol pneumatik - aplikasi lem langsung pada benda kerja - unit pemotong untuk tepi depan & belakang - unit frais rata / chamfer / radius - pembulatan sudut - pisau penarik permukaan dengan dual tracking

Kondisi: bekas, Tahun pembuatan: 2012, de-to-hu-01 Ltedpfx Aewnhb Ssahoa

Kondisi: baru, Tahun pembuatan: 2024, ENGLISH IN STOCK!!! Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 - 50 mm Min. workpiece length: approx. 160 mm Ready for operation: approx. 3.5 min Weight: approx. 900 kg Max. power consumption: Ø approx. 7.4 kW Extraction port: Ø 1 x 140 mm Electrical connection: 400 V - 3 Ph - 50 Hz Working table height: approx. 900 mm Feed speed: approx. 10 m/min Machine dimensions: approx. 4,300 x 1,300 x 1,400 mm (LxWxH) Combination rounding head Ledpfx Ajhymgdjahota Radius cutter R=2 mm Corner radius cutter R=2 mm Radius scraper R=2 mm

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Ltjdpfx Ajlht Hzjahoa

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment Lsdpfsi Am U Dox Aahota (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Ltodpjhqadcjfx Aahsa Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Ltsdei Am Ukjpfx Aahja Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Ledpji Anadsfx Aahjta