Tarik gergaji

Graule ZS135

Kondisi: bekas, 1748a800 Kljdpfey Tpqlex Ahhjt

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Kodpfxsxnlgce Ahhelt Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, NEW Description: - Crosscut and mitre circular saw with a maximum cutting height of 135 mm - Saw head can be mitred in two planes - Durable cast iron construction - Precision linear ball bearing carriage on hardened and ground steel shafts - Manual saw feed - Rapid mitre adjustment up to 25° horizontally and up to 45° vertically - Adjustable hard stops at 90° and 45° - Lower blade guard connectable to extraction system Scope of delivery: Kodpsvwf T Sefx Ahhslt Crosscut and mitre circular saw type ZS 135 N, without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Horizontal mitre range: 45°-90°-25° - Vertical mitre range: 90°-45° (tilting left) - Saw blade diameter: 350 mm - Extraction port diameter: 100 mm - Weight: 100 kg

Kondisi: bekas, daya: 2 kW (2,72 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, jenis arus masuk: tiga fasa, ketinggian potong (maks.): 135 mm, jenis penyesuaian ketinggian: mekanis, kecepatan rotasi (maks.): 3.800 rpm, kecepatan rotasi (min.): 3.800 rpm, Graule Mesin Gergaji Potong dan Mitre ZS 135, tinggi potong maksimum 135 mm, lebar potong maksimum sekitar 430 mm, diameter mata gergaji 350 mm, pengaturan sudut potong +45°/0°/-45°, motor 2 kW, diameter nozzle ekstraksi 100 mm, dijual sebagaimana dilihat, lokasi di Seevetal, tanpa transportasi, penjualan sebelumnya tetap diperhitungkan. Kjdpfxsy Sla Tj Ahhjlt

Kondisi: bekas, Tahun pembuatan: 1999, daya: 3 kW (4,08 hp), tegangan masuk: 400 V, ketinggian potong (maks.): 200 mm, diameter mata gergaji: 520 mm, berat keseluruhan: 350 kg, panjang pemotongan (maks.): 420 mm, diameter pemasangan: 50 mm, penggerak gergaji: 3.000 W, 04511 Crosscut and Mitre Circular Saw Graule ZS 200 N Used, year of manufacture 1999 Saw swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Borehole diameter: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminum fence With machine stand and rear hand crank for tilt adjustment Hydraulic feed brake Pneumatic material clamping, double-sided from above Saw blade spray system for coolant or lubricant Carbide-tipped circular saw blade for aluminum and plastics, diameter 520 mm Roller conveyor, type RLK, 4000 mm, with foldable material stop and scale Roller conveyor 4000 mm after the saw Roller conveyor width: 350 mm Transport dimensions of the machine approx. 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment. Sale as is. Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee. Subject to prior sale. No warranty is given for used machines; the following applies: 'purchased as inspected.' Kledpfxsyh Nfuo Ahhjt Terms of payment: Prices plus statutory VAT. Payment before collection or dispatch. Delivery terms: ex stock.

Kondisi: bekas, Tahun pembuatan: 2003, Diameter mata gergaji: 350 mm Diameter lubang: 30 mm Motor: 2 kW Kecepatan putar: 3800 rpm Diameter hisap: 95 mm Berat: sekitar 105 kg tanpa dudukan Lebar potong pada 90°: 430 mm Lebar potong pada 45°: 300 mm Tinggi potong: 135 mm Rem hidrolik anti-pantul Tanpa dudukan dan rel rol Lokasi penyimpanan: Nattheim Ksdpfxjyw Tzie Ahholt

Kondisi: baik (bekas), diameter mata gergaji: 360 mm, Gergaji Tarik / Gergaji Mitre / Gergaji Potong / Gergaji Radial Kedpfxsyckbij Ahhslt Wegoma zs 135 Gergaji Mitre Tipe ZS135 -Daya motor: 2,2 kW -Mata gergaji: Ø 360 mm, dapat diputar

Kondisi: bekas, Cut-off saw 3 kW Spindle diameter: 50 mm Spindle length: 300 mm Number of tool sets: variable Control: CNC Dimensions (L/W/H): 2500 x 1700 x 2100 mm Weight: 1700 kg HABERKORN - Slot Mortising Machine FZS-2 Electronics with infinitely variable slotting spindles and automatic roller table ----- Cut-off saw ----- Spindle arrangement: top Three-phase motor: 3 kW Spindle diameter: 30 mm Speed: 2,800 rpm Saw blade diameter: 400 mm * Automatic brake with speed monitoring * Infinitely adjustable saw positioning with Siko display * Safety and extraction hood with 100 mm extraction port 2 slotting spindles, 50 mm diameter ----- Power: 2 x 7.5 kW Speed: 4,200 rpm Spindle diameter: 50 mm Klsdpfowgwlkox Ahhst Tool diameter: approx. 360 mm Usable length: 300 mm * Both slotting spindles positionable via ball screw spindle * Freely programmable, 19 programs, display with function keys * Safety and extraction hood with 180 mm extraction port * Automatic brake with speed monitoring Mitre table ----- * Swivel range: +/- 65° * Automatically changing counter support (programmable) * Pneumatic clamp * High-precision electronic angle display * Automatic length compensation * Counter support always in cutting plane for any angle setting Special equipment ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length: 2,500 mm Extraction port diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for cut-off saw ----- Price for the above machine on request! ----- Photos show the same model. Original images not yet available. (Technical data as provided by manufacturer – no guarantee!) All prices net, plus legal VAT.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, Gergaji format dan potong Klsdpfx Ajymqkljhhst Graule ZS 135 Motor: 400 V / 2,0 kW Kecepatan putar: 3800 rpm Panjang potong: 430 mm (pada 90°) Tinggi potong: 135 mm Rentang kemiringan horizontal: 45°-90°-25° Diameter mata gergaji: 350 mm Diameter konektor hisap: 100 mm Berat: 100 kg

Kondisi: baru, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Crosscut and mitre circular saw for crosscuts - Mitre adjustment to both sides (60° / 45°) with fixed stop - Mitre cut on one side up to 45°, with fixed stop - Robust cast iron construction - Precision ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade height infinitely adjustable Kledpfx Aoxabqzehhet - Connection for optional extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x carbide-tipped circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastic - Steplessly adjustable hydraulic feed brake - Pneumatic material clamping from above, consisting of: 2 vertical clamping cylinders, adjustable with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Kondisi: baru, The ALTENDORF F 25 offers all essential features of a panel saw in a compact footprint. Whether for your first own workshop, daily use, industrial production, or as a powerful secondary machine—the F 25 is the space-saving all-rounder designed to boost your productivity. Materials such as wood-based panels, solid wood, wood-like substances, and extrusions can be processed with high precision, easy handling, and outstanding cut quality. The saw unit swivels on one side, enabling precise angle cuts. The smooth-running double roller carriage, designed according to the Altendorf system, comes as standard, as do the digital height and tilt displays. This is a machine suitable for both beginners and professionals alike. Klodpsu R S Hcjfx Ahhet Features: - Double roller carriage - Swivelling saw unit - Manual height and tilt adjustment - Parallel fence with manual fine adjustment - Crosscut/miter fence - Ready for optional scoring unit installation ----- Technical Specifications ----- - Swivel range: 0 - 46° - Carriage length: 3,200 mm - Cutting width: 1,000 mm - Cutting height: 100 mm - Max. saw blade Ø: 315 mm - Max. saw blade projection: 104 mm - (Non-CE version) Max. saw blade Ø: 350 mm, max. projection: 121.5 mm - Crosscut fence extendable up to: 3,450 mm - Speeds: 4,200 rpm - Motor power: 4.4 kW (5.5 HP) - Table height: 880 mm - Large extraction hood available as an option - - New showroom machine -

Kondisi: bekas, Tahun pembuatan: 2008, Fully equipped with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth Flat tooth negative for aluminum cuts Used, excellent condition, little use Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Kjdsww Nd Tepfx Ahhelt Machine no.: 2008/30/23 CE type-tested Motor: 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Swivels to the right Swivels to the left Machine base frame Right roller table 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Left roller table 5000 mm, Type RO Feed brake Aluminum material infeed Coolant spray unit 2 x pneumatic workpiece clamps right + left Pressure reducer valve New price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without any warranty or guarantee

Tahun pembuatan: 2004, Kondisi: baik (bekas), Crosscut and mitre saw, pull saw, chop saw, aluminium circular saw, metal circular saw, metal cut-off saw, under-table circular saw with double mitre function, aluminium chop saw, under-table saw, semi-automatic aluminium circular saw, chop saw, glazing bead saw Manufacturer: Graule Model ZS135 Kodpfx Aot Hafkehhelt -Motor power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, tiltable -Cutting capacity: 90° flat 430 x 135 mm -Cutting capacity: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg including pallet

Tahun pembuatan: 2026, Kondisi: baru, Washing line for fruit and vegetables. The unit is constructed entirely from stainless steel. It features a sorting grid, washing tank, and conveyor belt. The fruit drops into the water and, after pre-washing, is conveyed by the belt where it is thoroughly cleaned with fresh water. The cleaned produce is then transferred to the mill, where various sieves can be used to achieve the desired mash consistency. The washing line is equipped with a dosing attachment for packing presses. Technical data: • Rated output: 1,500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • IP65-rated electrical control box • Pivoting grater mill • Fitted with mobile castors • Easy to clean • Through the frequency converter, the conveyor throughput can be easily adjusted Dimensions: Length: 3,250 mm Kljdpfxotu Ikcj Ahhjt Width: 840 mm Height: 2,270 mm Weight: 200 kg

Kondisi: diremaj di bengkel (bekas), Fungsionalitas: berfungsi sepenuhnya, Year of manufacture: 1997, connected load: 380V, 5.2A, 2.0kW, saw blade diameter: 350 mm, swivels 45° to both sides, height adjustable via hand crank, cutting length: 600 mm, extraction port: 100 mm, table height: 890 mm, right-side roller conveyor with stop, cutting length: 3200 mm, left-side roller conveyor with stop, cutting length: 2200 mm Kodpswhn T Usfx Ahhslt