Mesin pengikat tepi

HEBROCK F2 Next

Kondisi: baru, ebrock Model F 2 next Ltjdpol D Rp Ejfx Aahsa Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. The 3.3 m long F 2 is not only affordable and space-saving. It also offers the features you need to process perfect edges from the start: diamond-tipped jointing cutters ensure excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Application of hot-melt adhesive to the workpiece for edge materials up to 3 mm Jointing cutter (incl. Dia - tool) for cutting depths up to 2 mm Maintenance-free glue pot with quick-change reservoir system incl. glue discharge device HF end trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version) Robust chain feed Ball-bearing double pressure rollers Viewing window at the rear of the machine Extendable workpiece support Including special equipment: F2/12 surface scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) F2/27 nesting for milling stations

Kondisi: bekas, Tahun pembuatan: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4–30 mm (depending on configuration) Edge height: 51/66 mm (depending on configuration) Panel thickness: 6–45/60 mm (depending on configuration) Edge types: roll and strip material Feed speeds: infinitely variable feed from 12–30 m/min (depending on configuration) with adjustable infeed level in the magazine area (max. adjustment range 30 mm) with height-adjustable magazine plate for varying the lower edge overhang with large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm with transport chain including automatic central lubrication with motorized, position-controlled bridge height adjustment with pneumatic locking roller for minimal workpiece spacing with extendable workpiece support (extension 1600 mm) with space-saving, pneumatically controlled sliding covers along the entire machine (variations possible for individual units) with motorized infeed fence with spray oilers for lubrication of all joints and bolts (incl. operating hours counter) with central extraction connection (2x Ø 200 mm) with integrated chip collection box at the end of the machine (with radius scraper unit installed) Controller PPC 231 - Power PC for efficient setup and changeover - 15" SVGA display with touchscreen - CF memory card 128 MB - USB port on board - Ethernet network connection - Keyboard port on board - Windows-like user interface - all information in plain text and/or graphics - swivel and pivoting control panel at eye level - dustproof membrane keyboard with softkeys (pushbuttons) - LED indicator for unit preselection Lodpfxsvvkfds Aahsta - program list with program names and numbers - extensive program storage - individual selection of units with functions for basic settings of setpoint values, reference points, and tool corrections as well as fixed reference points - setup operations for units and their axis settings centrally and clearly organized via fine adjustment (depending on configuration) - interval display for minimum workpiece distance - integrated reference control - reference points are controlled in general or program-specific mode - clear and comprehensive acquisition of all operating data - service messages in plain text - diagnostics system - includes integrated synchronous bus system for high accuracy in unit control - individual management for up to ten users, including password protection - online maintenance (optional), data exchange with HOLZ-HER Service - barcode interface (optional) BASE MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the base machine Spray unit 1856 for infeed and outfeed area For the infeed area: Electronically controlled release agent spray unit with release agent Riepe-LPZ/II For the outfeed area: Electronically controlled cleaning agent spray unit with cleaning agent Riepe-LP163/93 (only in combination with jointing cutter unit 1961 and surface scraper 1964) Jointing cutter unit Jointing station 1803 (2x 2.6 kW, 200 Hz, 12,000 rpm) With two plunge-controlled milling units • 1 unit in counter-rotation • 1 unit in co-rotation Plunge depth 5 mm with static frequency converter 200 Hz, without milling tool with ProLock quick-release tool holder for rapid tool change Tool for 1803 (workpiece height up to 60 mm) Diamond cutter PRO UT 2 pcs (front and rear) incl. safety hoods Ø 100-63 – Ø 30 mm, Z = 3 + 3 + 3, 1x left rotation, 1x right rotation Low-noise cutter with integrated chip guidance DFC technology (Leitz system) Chip removal max.

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. Ltsdoi Am U Dopfx Aahoa F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, HEBROCK Mesin Lem Pinggir F2 next dengan kontrol PLC (termasuk layar sentuh) dan aplikasi lem leleh ke benda kerja untuk material pinggiran hingga 3 mm: mesin frais sambungan (termasuk alat potong DIA) hingga kedalaman frais 2 mm, bak lem bebas perawatan dengan persiapan untuk bak yang dapat diganti termasuk perangkat pengeluar lem, stasiun potong HF (sekitar 12.000 rpm), stasiun frais HF (sekitar 12.000 rpm) dengan pengaturan frais pneumatik terpisah dan pisau frais ganti (versi kombinasi), penggerak rantai yang kokoh, tekanan atas rol ganda dengan bantalan bola, jendela inspeksi dari belakang mesin, penopang benda kerja yang dapat ditarik keluar, kecepatan pengumpanan sekitar 10 m/menit. Termasuk: F2/500/10 Kepala frais sambungan Whispercut F2/500/20 Kepala frais kombinasi F2/500/2 Pisau frais radius R=2mm Lsdpfx Aaewmdbroheta F2/12 Pisau penarik permukaan (termasuk pengangkatan pneumatik)

Kondisi: siap digunakan (bekas), Technische Daten Druck: 2,2 kg/cm² 18 kW Thermoölkessel zeitgesteuerte Pressung digitales Display Leistung und Motoren Spannung: 400 V Anschluss: Drehstrom Leistung: 20 kW Abmessungen gesamte Länge: 3.500 mm Ltodpfx Aajt N Autohsa Breite: 1.500 mm Gewicht: 3.200 kg

Kondisi: baru, Tahun pembuatan: 2025, Description Technical Data Scope of Delivery Accessories Optional Equipment Ideal for demanding craftsmen and cabinetmakers The especially long, one-piece jointer tables allow for easy straightening of workpieces Lodpfxsff Hdpe Aahota Work tables are made from cast iron, making them resistant and permanently flat Rearward, simultaneously opening jointer tables with spring-assisted support for quick and convenient conversion Thanks to the fixed-mounted extraction hood, no need to reconnect the extraction hose during machine conversion, saving valuable working time Helically toothed steel infeed roller ensures a constant and uniform material feed Rubber outfeed roller at the end of the thickness planer guarantees even wood extraction Material feed with four speeds Planer thickness table adjustment via handwheel with integrated height display DIGITAL version: with electric thickness table height adjustment and digital display On/off switches positioned for operator convenience Powerful industrial motor The high machine weight ensures maximum precision and smooth operation Prepared for mortising unit installation Quality Made in Italy Dimensions and Weights Length approx. 2250 mm Width/Depth approx. 1370 mm Weight approx. 695 kg Jointer Total table length: 2250 mm Maximum cutting depth: 5 mm Fence length: 1200 mm Fence height: 150 mm Dust Extraction Connection Thicknesser extraction port diameter: 1 x 120 mm Drive Power Main motor: 7 kW Installation Information Required length: 2250 mm Required width/depth: 1440 mm Explanation on space requirements: Dimensions take into account maximum travel distances or working lengths. Thicknesser Thickness table length: 850 mm Thickness table width: 520 mm Working height min.: 3 mm Working height max.: 240 mm Working length min.: 220 mm Maximum cutting depth: 5 mm Electrical Data Connection voltage: 400 V Phases: 3 Ph Current type: AC Line frequency: 50 Hz Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Ljdped H Sc Eefx Aahjta Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Tahun pembuatan: 2011, Kondisi: sangat baik (bekas),

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, BRIQUETTING PRESS machine, AUTOMATIC, HYDRAULIC model POR STANDARD used machine Ltjdjw E Iyiopfx Aahja working condition: Excellent Briquette cutting system hydraulic machine CE marking: Yes hourly output: 60 / 90 kg/h hydraulic pump motor: 7.5 HP briquette diameter: 65 mm max. briquette length: 50 / 300 mm voltage: 380V / 50Hz net weight: 800 kg overall dimensions: 195 x 110 cm, H = 150 cm

Tahun pembuatan: 1985, Kondisi: siap digunakan (bekas), Cutting width: 1150 mm, max. format: 1150 mm x 1150 mm, max. stack height: 120 mm, min. cut size: 20 mm, clamping force: 40 kN, cutting speed: 42 cuts/min, machine dimensions (L/W/H): approx. 2650 mm x 2650 mm x 1700 mm, weight: approx. 3000 kg, control system: MCS-2 TV. Documentation available. On-site inspection possible. Lsdpfjwt Dblox Aaheta