Beli Hebrock F2 Next bekas (1.881)

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving, but also comes equipped with everything you need to process perfect edges right from the start: diamond-tipped pre-milling cutters ensure excellently prepared workpieces for edge banding. Standard features include a pre-milling unit (up to 2 mm milling depth), a top-mounted quick-heat glue pot, end trimming saw, and a combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Fsdji Am U Dopfx Airogc Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 – 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot-melt glue application to the workpiece for edge materials up to 3 mm; pre-milling unit (incl. diamond tooling) up to 2 mm depth, maintenance-free glue pot with quick-change setup including glue drain device, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and replaceable insert cutter (combination version), robust chain feed, ball bearing double roller top pressure, viewing window at machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 chassis F2/30 pneumatic 3-point adjustment (for radius, bevel, or flush trimming)

Kondisi: baru, Tahun pembuatan: 2025, HEBROCK Mesin Lem Pinggir F2 next dengan kontrol PLC (termasuk layar sentuh) dan aplikasi lem leleh ke benda kerja untuk material pinggiran hingga 3 mm: mesin frais sambungan (termasuk alat potong DIA) hingga kedalaman frais 2 mm, bak lem bebas perawatan dengan persiapan untuk bak yang dapat diganti termasuk perangkat pengeluar lem, stasiun potong HF (sekitar 12.000 rpm), stasiun frais HF (sekitar 12.000 rpm) dengan pengaturan frais pneumatik terpisah dan pisau frais ganti (versi kombinasi), penggerak rantai yang kokoh, tekanan atas rol ganda dengan bantalan bola, jendela inspeksi dari belakang mesin, penopang benda kerja yang dapat ditarik keluar, kecepatan pengumpanan sekitar 10 m/menit. Fedpfx Aowmdbrsirogc Termasuk: F2/500/10 Kepala frais sambungan Whispercut F2/500/20 Kepala frais kombinasi F2/500/2 Pisau frais radius R=2mm F2/12 Pisau penarik permukaan (termasuk pengangkatan pneumatik)

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f2-en Fodpelht Hzsfx Airogc

Kondisi: baru, Tahun pembuatan: 2025, hebrock-f5-en-2024 Fgedpfxei Anadj Airsc

Kondisi: baru, ALTENDORF Model F 2 Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer's warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to achieve perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. Features include a jointing unit (up to 2 mm cutting depth), a top-mounted quick-heating glue pot, crosscut saw, and combination milling unit. Optionally, the F 2 can also be equipped with a flat scraping blade. Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (including touchscreen) Hot-melt glue application to the workpiece for edge material up to 3 mm Jointing cutter (including diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change preparation including glue drainage device HF crosscut saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and indexable insert cutter (combination version) Robust chain drive Double roller overhead pressure with ball bearings Inspection window on rear side of the machine Extendable workpiece support Including special equipment: F2/12 flat scraper (incl. pneumatic lift) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush trimming) Fsdpel D Rp Esfx Airogc F2/27 nesting for milling stations

Kondisi: baru, Tahun pembuatan: 2025, Edge banding machine F5 with PLC control (incl. 15" touchscreen), thermoplastic glue application to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with provision for interchangeable pot including glue discharge device, HF milling station with pneumatic cutter adjustment, including corner rounding unit, radius scraper blade, flat scraper blade (incl. pneumatic lift-off device), Fodpfxjh Hl Ayj Airsgc buffing station Whispercut jointing head Combination milling head Radius cutter R=2mm Radius corner milling unit R=2mm Quick-change system for corner milling unit Radius changeover motor R=1mm Multi-radius scraper R1/R2 Chassis Release agent spray unit (PUR) Cleaning agent spray unit (PUR) pneumatic 3-point adjustment LED lighting INCLUDES 2nd interchangeable glue pot Max. edge thickness 3 mm Workpiece thickness 8–50 mm Min. workpiece length approx. 160 mm Feed speed 10 m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300 x 1300 x 1400 mm (L x W x H) Weight approx. 900 kg Extraction port 1 x 140 mm

Kondisi: bekas, Tahun pembuatan: 2000, tinggi total: 1.600 mm, panjang total: 4.300 mm, lebar total: 840 mm, Color: Grey - Year of manufacture: 2000 - Documentation available: No - CE certificate available: No - Serial number: 404 - Number of units [pcs]: 6 Fgedpjykafaofx Airsc - 1st unit type: Glue applicator - Tools included: Yes - 2nd unit type: Pressure rollers - 3rd unit type: End trimming unit - Tools included: Yes - 4th unit type: Corner rounding unit - Tools included: Yes - 5th unit type: Radius scraper unit - Tools included: Yes - 6th unit type: Buffing unit - Tools included: Yes - Glue system: Glue pot - Voltage [V]: 400 - Power consumption [A]: 15.8 - Power output [kW]: 10.2 - Transport dimensions: 4300mm x 840mm x 1600mm (L x W x H) - Transport packages [pcs]: 1 Financial information VAT: The quoted price is subject to VAT VAT/margin taxation: VAT is deductible for business customers Delivery and trade-in possible at any time for all industrial equipment Yorick Diebels

Tahun pembuatan: 2000, Kondisi: bekas, gebrauchtmaschine-2000-roellbach Fgsdpezbv Hnofx Airoc

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, de-001 Fgodezbyvaspfx Airsc

Kondisi: baru, Tahun pembuatan: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft operations. The F 5 ensures edge processing at every step, as it comes equipped with all the components required for your application: jointing cutter, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even more flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Features: Hebrock F5 Next – 10 m/min F5 Next Edge Banding Machine With PLC control (including touchscreen) and hot melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change pre-installation including glue discharge device, HF end trimming unit (approx. 12000 rpm), HF milling unit (approx. 12000 rpm) with separate pneumatic height adjustment and interchangeable cutter block (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller upper pressure with ball bearings, viewing window on machine rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding F5/08/5 Additional interchangeable motor corner rounding unit with tool setup F5/09/4 Multi-radius scraper (R1/R2) Fgjdpfxjlht Hwe Airsc F5/24/1 Spray unit separating agent F5/24/2 Spray unit cleaning agent F5/25 Spray unit edge F5/27 Nesting for milling and radius scraper F5/30 Pneumatic three-point adjustment (radius-, bevel-, and flush trimming) Location: Ex-stock 54634 Bitburg - Available in calendar week 4 -

Kondisi: baru, Tahun pembuatan: 2025, Hebrock F 4 Complete Processing of Your Panels For those who don’t want to do things by halves. With the F 4, we offer you a model that allows you to produce fully processed panel edges within a machine length of just 4 meters. The F 4 is not only space-saving but also extremely attractive in terms of price-performance ratio. Max. Edge thickness: 3 mm Min./Max. workpiece thickness: 8 – 50 mm Min. workpiece length: approx. 160 mm Feed speed: approx. 7 m/min Ready for operation: approx. 3.5 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 4050 x 1300 x 1400 mm (LxWxH) Weight: approx. 820 kg Extraction port: Ø 1 x 140 mm 10″ Touchscreen PLC control Top-mounted quick-heating glue pot (maintenance-free) Support plate for edge material Automatic centralized lubrication (cross-cut saw, corner rounding) Optical display for workpiece sequence Extension arm (extendable to front) Quick-change glue basin incl. glue change unit for PUR processing Surface scraper with dual sensor Pneumatic end trimming (scissor-type, Hebrock system) Double roller upper pressure (ball bearing mounted) Transport chain with fixed-mount special chain plates Jointing cutter Milling unit Cross-cut saw Corner rounding unit Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi-radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Fedpfxohqadcs Airegc Location: From stock 54634 Bitburg - available at short notice -

Kondisi: baru, Tahun pembuatan: 2025, en-Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately available - This long-running Hebrock bestseller offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a step milling cutter and a multi-radius scraper blade, Hebrock sets new standards in perfect edge processing for a wide range of edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8–60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Fgjdpfx Aoi Am Ukoiroc Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1,750 kg Equipment: Hebrock K 36 – 15 m/min Edge banding machine K36 With PLC control (incl. 15" touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change pre-equipment including glue drain device, HF double-motor trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment and interchangeable cutter (combined version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lifting device), buffing station, robust chain feed, ball-bearing-supported double roller upper pressure, aggregate inspection windows on machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge bonding up to 60 mm workpiece thickness 36/08/1 Quick-change corner rounding unit 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 36/09/1 Multi-radius scraper 36/24/1 Separating agent spray unit 36/24/2 Cleaning agent spray unit 36/25 Edge protection spraying unit 36/27 Nesting (1x milling station + 1x radius scraper) 36/30 Pneumatic 3-point adjustment 36/30/1 Multitool for HF milling station (R2/R1/chamfer) 36/45 Axis package Motorized adjustment for panel, edge thickness and jointing cutting depth settings Location: in stock at 54634 Bitburg - immediately available -

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, tinggi benda kerja (maks.): 60 mm, kecepatan pemakanan sumbu X: 10 m/menit, kecepatan spindel (maks.): 16.000 rpm, jenis kontrol: Dikendalikan oleh PLC, The machine has already been dismantled and stored by a qualified technician. TECHNICAL DETAILS Crosscut saw station speed: approx. 16,000 rpm Milling station speed: approx. 16,000 rpm Max. milling depth: 3 mm Designed for edge thickness: 1 mm Hot-melt adhesive specification for edge material max.: 3 mm Feed speed: approx. 10 m/min Max. workpiece thickness: 60 mm EQUIPMENT Maintenance-free coated glue pot with preparation for quick-change pots Glue discharge device Pneumatic milling adjustment Combination version with indexable insert cutter Corner rounding unit Radius scraper Fedszb Idfjpfx Airsgc Flat scraper with pneumatic lift device Buffing station Robust chain drive Ball bearing double roller upper pressure Aggregate viewing windows on machine rear and operator side Signal lamp for workpiece sequence Extendable workpiece support ACCESSORIES Hebrock 8 mm version Hebrock quick-change system for corner milling unit Hebrock jointing up to 60 mm workpiece thickness Hebrock edge protection spray Hebrock nesting (milling unit + radius scraper) Hebrock Airtronic Note: Accessories not guaranteed. Applies: "Item purchased as seen." Prospective buyers must check the completeness of the item on site.

Kondisi: bekas, Tahun pembuatan: 2011, penyetelan frais pneumatik (lurus/jari-jari) Stasiun frais kombinasi R=2 Frais pembulat sudut R=2 hingga 40 mm Frais penyambung hingga 40 mm Pisau tarik permukaan Pisau tarik profil R=2 untuk benda kerja pendek Pengontrol SPS dengan layar sentuh Pro Face Nesting Semprotan pendingin/anti statik - airtronic Semprotan pelindung tepi Riepe termasuk bak cadangan Tebal benda kerja: 8 - 60 mm Penjepitan tepi mekanis Konektor ekstraksi: 140 mm Dimensi: Panjang dengan ekstensi: 4984 mm Kedalaman dengan meja rol: 1425 mm Tinggi maks.: 1618 mm Tinggi meja kerja: 888 mm Berat: 1400 kg Fedpfxsxyiils Airsgc Lokasi penyimpanan: Nattheim

Kondisi: sangat baik (bekas), Edge banding machine HEBROCK K36 Airtronic - used - Fgsdpfx Aisymyp Rjroc PC control with display, touchscreen, swivelling control panel, program memory, automatic adjustment of pressure bridges, feed via transport chain, extendable workpiece support, motorised adjustable infeed fence, diamond pre-milling cutters for both climb and conventional cutting, quick heating glue pot, change system for glue pot, suitable for PUR adhesives, cross-cut saw with HF motor, flush trimming unit, flush/radius/chamfer milling unit, pneumatic switchover for milling unit, multi-milling tool, multi-radius scraper, chip extraction box for radius scraper, air nozzle at radius scraper, surface scraper, air nozzle at surface scraper, change motor for corner rounding, spray device for separator agent, spray device for cleaning agent, spray device for antistatic coolant, spray device for lubricant, LED lighting in machine compartment, interchangeable glue pots, zero-joint Airtronic system ----- Technical Data ----- Edge thickness (coil material): 0.5–3 mm, max. edge thickness for corner rounding: 3 mm, workpiece thickness: 8–60 mm, workpiece thickness for corner rounding: 45 mm, min. workpiece length: 200 mm, feed speed: 7–10 m/min, support plate ø for edging material: 850 mm, cutting knife for coiled material up to: 3 mm, power of pre-milling cutters: 2x2.2 kW, power of cross-cut saw: 0.37 kW, power of milling unit: 2x0.37 kW, power of corner rounding: 0.37 kW, power of buffing unit: 2x0.18 kW, dust extraction port ø pre-milling unit: 60 mm, compressed air connection: 7 bar, total length: 5,540 mm, dimensions (LxWxH): 5,540 x 1,210 x 1,450 mm, weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Kondisi: sangat baik (bekas), Hebrock F5 Mesin Edge Banding Dilengkapi dengan baik, dapat diuji sebelum pembelian. Milling awal, Pengaplikasian lem dengan rol, Dilengkapi dengan pembuangan lem, Panci lem dapat diganti, Panci kedua termasuk dalam paket. Gilotin pra-potong pneumatik, Rol penekan, Gergaji potong akhir, Cairan terintegrasi, Unit milling atas-bawah, R1 – R2, Fgjdpfeza Uq Ajx Airjc Pisau siklin profil, Unit penyelesaian sudut, Pisau siklin datar, Polisher, Regulasi pneumatik 3 titik, Maks tebal edging pada rol 3mm, Kebutuhan daya 7,8KW, Maks tebal elemen 50mm, Mesin bekas, kondisi sangat baik, Jarak tempuh 62.000 meter.

Kondisi: bekas, 1 Fgedpswtfvkofx Airec

Kondisi: baik (bekas), Tahun pembuatan: 2004, kantenanleimmaschine-hebrock-akv3005-2004 Fjdpoyyw Tzofx Airsgc

Kondisi: sangat baik (bekas), TOP-ZUSTAND Hebrock Kantenanleimmaschine Modell: Top 2000 Maschinenbeschreibung Ausstattung - Heizleiste für Spanplatten - Leimbehälter - Druckwalze - Vorder- und Hinterkantensäge - Ober- und Unterfrässtation, Radius und Geradfräsen - Maschinenlänge: 3100 mm - Gewicht: 600 kg Fedpfxozadx As Airogc

Kondisi: hampir baru (bekas), Edgebander Hebrock F4 Dilengkapi dengan baik, dapat diuji sebelum pembelian. Pisau grooving awal (pre-milling), aplikasi lem menggunakan rol, Dilengkapi dengan pembuangan lem, Pot lem dapat diganti. Fgjdpfx Aioy Dcmusrsc Gilotin awal pneumatik, rol penekan, Gergaji potong finishing, Unit milling atas-bawah, R1 – R2, Scraper profil R1-R2, Unit pengerjaan sudut yang dapat diganti untuk 1mm dan 2mm, Scraper datar, Nesting, Regulasi pneumatik 3 titik, Pencahayaan LED, Maksimal ketebalan edge tape dalam rol: 3mm, Kecepatan feeding: 7 dan 10m/menit, Kebutuhan daya: 7,08KW, Harga katalog mesin baru dengan perlengkapan ini lebih dari 51 ribu euro. Mesin tahun 2026, bekas display, pemakaian 18 jam.

Kondisi: bekas, Tahun pembuatan: 2018, Edgebanding machine AKV 3006 DK - F with jointing milling unit, including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combination milling station for radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edgebanding material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with indexable insert cutter (combination version) and cutter fine adjustment from the operator side - Spare positions for additional processing units (Hebrock system) - Feed rate approx. 10 m/min - Cutting depth adjustment for the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller upper pressure beam - Aggregates viewing window from the rear and operator side - PLC control including touchscreen Technical Data: - Feed speed: 10 m/min - Panel thicknesses: 8 - 40 mm - Weight: approx. 1,550 kg (depending on equipment) - Dimensions (L x W x H): 5,250 x 1,445 x 1,600 mm Airtronic system including cooling and anti-static spray device, year 2014 1 pc. hot air unit for creating the optical zero-joint, for special edgebanding materials - Including pneumatic glue pot positioning - Including cooling and anti-static spray device - Including 2 additional quick-change edge channels - Including special version corner rounding cutter, max. workpiece thickness 60 mm, min. workpiece length 200 mm - Exclusively for Hebrock edgebanding machines of the 3000 series (retrofit option available on request, extra cost) Technical Data: - Max. panel thickness: 40 mm - Max. edge thickness: 1.2 – 2.0 mm - Feed speed: 7 – 10 m/min - Air consumption: approx. 280 – 580 l/min (Airtronic only), electronically controlled - Ready for operation after approx. 2 min - Upgraded for 8 mm edge thickness, 1 pc. to maximum 40 mm workpiece thickness - Including pneumatic saw adjustment, special version, min. workpiece thickness 8 mm - 1 pc. 3-point pneumatic cutter adjustment - 1 pc. switching for radius/chamfer/flush for combination milling stations (eliminates manual adjustment at the combination milling station for the 3rd reference point, PLC control mandatory) Polishing station (buffing) - 1 pc. corner rounding cutter, including combination tool and pneumatic chamfer/radius adjustment, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm Radius scraper - 1 pc. including pneumatic lift-off device, radius R 2.0 mm Flat scraper - 1 pc. with pneumatic actuation control Chassis, complete - 1 pc. glue station change system, including downward-facing glue discharge device (preparation only), no 2nd glue pot, machine is suitable for processing PUR adhesive Grooving saw unit, vertical, into the panel - 1 pc. including pneumatic lift-off device - Vertical groove - Groove width 8.2 mm - Groove depth 8.0 mm - Distance from workpiece edge 14.0 mm - Special version grooving saw motor with increased power - 1 pc. exhaust extraction for jointing unit (connected to the machine's extractor manifold) Ball bearings for corner rounding cutter: 24.1 mm (1 pc.), 24.2 mm (1 pc.) Protective spray device Fgedox S Hmzepfx Airec - 1 pc. for the edge surface for sensitive edgebanding materials Spray device for panel, combined (release agent and cleaning agent spray device) Location: Suppli

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Data teknis: • Produsen: Hebrock GmbH (Made in Germany) • Tipe: EURO 2000 • Tahun pembuatan: 1999 • Tegangan: 230 / 400 V • Frekuensi: 50 Hz • Daya: 7 kW • Konsumsi arus: 13,6 A Ruang kerja: • Ketebalan benda kerja: sekitar 10 – 50 mm • Ketebalan tepi: sekitar 0,5 – 3 mm • Panjang minimum benda kerja: sekitar 250 mm • Lebar minimum benda kerja: sekitar 70 mm • Kecepatan makan: sekitar 10 m/menit • Diperlukan koneksi udara tekan (sekitar 6–7 bar) Lokasi: ready stok 54634 Bitburg - tersedia segera - Fedpfjy Ahtwex Airegc

Kondisi: bekas, Spray extraction wall 2000 x 2200 mm with 3-stage filtration, filtration area 2000 x 1000 mm. Working area with 1 meter depth, built-in IP65-rated light fixture, and table for tools/materials. NEXT 211 fan, 1.1 kW, ATEX explosion-proof, max 4500 m³/h, mounted on top of the wall. Start/stop controller and duct connection unit with noise suppressor for exhaust to the outside. Condition: good. Fgedpfx Aisvuqg Sorec Can be inspected in Vilnius. If you have further questions, we will be happy to answer them.

Kondisi: baik (bekas), Edgebander Hebrock top 3003f Dilengkapi dengan baik, dapat diuji sebelum pembelian. FREIS awal, aplikasi lem dengan roller, guillotine pneumatik awal, rol penekan, Fedpfxoy Tv Sio Airegc pisau pemotong akhir, unit frais atas-bawah, R1 - R2 disetel secara pneumatik, unit pembulatan sudut, pisau skrap datar, ketebalan edging maksimum pada roll 3 mm, maks tinggi 60mm. Mesin dalam kondisi baik, siap digunakan.

Kondisi: baru, Tahun pembuatan: 2026, Hebrock - Altendorf Edge Banding Machine F5 next - Brand new machine, still in original packaging with full equipment - With PLC control including 15" touchscreen - Edging material up to 3 mm - Whispercut joiner head incl. DIA tool up to 2 mm - Coated, maintenance-free glue pot, PU quick-change pot - Incl. glue discharge device downward - HF milling station with pneumatic milling adjustment - Corner rounding unit - Radius scraper - Flat scraper incl. pneumatic retraction device - Cleaning station - Combination milling head - Radius milling cutter R=2mm - Corner radius milling cutter R=2mm - Quick-change device for corner milling unit - Additional interchangeable motor for corner milling unit with tool assembly - Interchangeable radius motor R=1mm - Ball bearings 24.1 and 24.2 mm - Multi-radius scraper R1/R2 - Chassis Fgsdpfxsy Iw Nrs Airoc - Additional interchangeable glue pot incl. stand - Spray device for releasing agent PUR - Spray device for cleaning agent PUR - Spray device for edge PUR/foil - Nesting device for milling cutter and radius scraper - Pneumatic 3-point adjustment (radius, chamfer, flush milling) - Jointing up to 50mm workpiece thickness - LED interior lighting - Workpiece thickness 8-50mm - Min. workpiece length approx. 160mm - Feed speed approx. 10m/min - Dimensions LxWxH 4.40 x 1.10 x 1.55m - Weight: gross 990 kg, net 930 kg - Extraction nozzle 1 x 140mm Delivery and commissioning possible