Mesin pengikat tepi

HEBROCK F4 Next

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw, Type: ZS 200 N – 5 kW Motor Includes machine stand, but without saw blade Machine can be tilted using handwheel and worm gear (at the rear) Dedpfx Aei Dfidsgqewd Saw blade diameter: 520 mm, blade bore: 50 mm Saw blade speed: 2800 rpm 400 Volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled to one side to approx. 25° for acute angles and tilted left up to 30° for flat cuts Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Dwsdpeg Tu Rkofx Agqsd Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Jointing unit Whispercut Corner rounding unit radius: R = 2 mm Quick-change system for corner rounding Corner rounding motor with radius: R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spray unit Cleaning agent spray unit Edge protection spray Nesting Pneumatic 3-point adjustment Multifunctional milling unit (R2/R1/Chamfer) Equipment for short workpieces

Kondisi: baru, Tahun pembuatan: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly create perfect foundations. It was precisely with this goal in mind that the T54 was developed. The machine enables you to surface workpieces easily to state-of-the-art standards and reliably apply angular edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut action is available as an optional extra. Chamfer planing is effortless – thanks to the user-friendly single-handed adjustment, any angle between 90° and 45° can be set quickly. The robust cast iron tables of the T54 provide secure support even for large and heavy workpieces. If you require more support, you can extend both infeed and outfeed tables by 380 mm each, also in cast iron of course. Technical Data Table width: 500 mm Dwjdpfx Agopgkmweqjd Table length: 2840 mm Max. depth of cut: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock with 4 knives Location: Available ex-stock, 54634 Bitburg - Immediately available -

Kondisi: baru, Tahun pembuatan: 2026, Otomatis CNC bor dan penanam pasak untuk pengeboran, lem, dan penanaman pasak sepenuhnya otomatis. Pusat pemrosesan bor dan pasak dengan keunggulan compact, efisien, berkualitas dan fleksibel. Perkenalan singkat: • Mesin bor dan penanam pasak CNC universal yang dikendalikan komputer • Pengawasan suntikan lem melalui GIC • Sistem lem tertutup • Cocok untuk pemrosesan panel dan kayu solid • Spindel bor horizontal dan vertikal tambahan opsional • Mengurangi beban pada pusat pemrosesan CNC • Pelengkap optimal untuk mesin nesting Dodpfx Agedx Axfoqswd

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Single-sided automatic edge banding machine with pre-milling unit, hot-melt adhesive application for straight workpieces (EVA/PUR glue pot with drainage function optional), 2-motor high-frequency end trimming station, HF combination milling unit, corner copying unit, chain feed system, motorized top pressure with encoder and double ball bearing pressure rollers, extendable workpiece support rail, signal lamp for workpiece sequence, integrated section control for contactless operation of machining functions, as well as L-Motion control (6 axes). Suitable for ABS, PVC, melamine, and thick wood veneer edge banding tapes, as well as fixed lengths of 0.4 – 3.0/6.0 mm and workpiece heights from 10 to 60 mm. • Two counter-rotating, operation-controlled pre-milling units with diamond-tipped spiral milling cutters ensure clean and tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity, leak-proof with glue supply from below (excess glue is automatically returned to the pot). Fine, adjustable adhesive application via glue roller, separate temperature setting for the glue roller, electronic temperature control with automatic standby function (prevents glue burning if the machine is unused for extended periods while still powered on). Optional: EVA/PUR glue pot with drain/cleaning function for quick color changes Optional: Quick-change glue pot system • Pressure section consisting of a driven pressure roller synchronized with the glue applicator roller and two smaller, oppositely conical, spring-loaded pressure rollers ensures optimal joining of the edge material with the workpiece. Motorized adjustment of the pressure zone (1x L-Motion) • High-frequency end trimming saw with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades. Pneumatically tiltable from the operator panel. Djdol Rix Eopfx Agqjwd • High-frequency combination milling station: 2 powerful 0.55 kW HF motors with HM-WPL special cutters. Motorized adjustment of the milling station (4x L-Motion) • Corner copying unit: Automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge banding; not recommended for soft and postforming profiles. Option for single-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1x L-Motion) • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module • Standard equipment includes LED lighting and LED-Motion system • Optional: Motorized infeed fence adjustable from the control panel (1x L-Motion) Optional finishing units (3 free slots): -Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder. The operator panel allows pneumatic switching between radius R1 and R2. -Flat scraper unit: Removes glue residues from the workpiece surface at the glue joint with a lightly pulling cut, pneumatic ON/OFF control via air cylinder -Polishing unit: 2 motors 0.09 kW, 1,500 rpm ensure an excellent finish

Kondisi: baru, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel unit 2 combination unit with pad Pad pneumatically pressed Abrasive belt dimension: 970 x 2150 mm Total power of two sanding units: 11 kW Feed belt speed (inverter-controlled): 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Dodpfsg A D Anex Agqewd Diameter of sanding rollers: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the abrasive belt without the use of compressed air (ECO GEAR SYSTEM) Infinitely variable feed belt speed via inverter: 4-20 m/min Automatic star-delta starter Steel roller on the first unit, rubber-coated roller on the combination unit Electronic table height display Automatic material thickness sensor and table positioning system Safety switches Automatic machine switches Main motor brake Rubber pressure rollers 2-roller infeed and outfeed tables Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Kondisi: baik (bekas), Kode: 0120 Merek: ORMAMACCHINE Model: NPC/3000S - Standar CE Mesin pres panas dengan minyak diatermik untuk kayu, lapisan kayu, panel kayu, panel berlapis, lapisan kayu, material komposit, gabus, aluminium, dan berbagai material lainnya – Standar CE Dedpfszil Ipsx Agqswd Dimensi plat mm 3000 x 1300 Daya tekan ton 70 Jumlah piston 6 Bukaan mm 400 Motor Hp 2 Pemanasan dengan minyak diatermik menggunakan boiler elektrik Plat berlapis Mylar Dimensi keseluruhan: mm 3600 x 1550 x 1900 (tinggi) Berat kg 3500

Tahun pembuatan: 2014, Kondisi: siap digunakan (bekas), 004 Djdpfsyg Nu Nsx Agqowd

Kondisi: baru, Bernardo Topcut 3200 ER Panel Saw Technical Specifications Table size: 1100 x 735 mm Sliding table: 3200 x 400 mm Ripping length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height at 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Dwodpfxsd N S T Dj Agqsd Main blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port Ø: 100 mm Motor output S1 100%: 5.5 kW (7.5 HP) Motor intake power S6 40%: 7.5 kW (10.0 HP) Scoring unit motor power: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electrically adjustable saw blade height • Digital cutting height display • Saw blade guard with infeed roller • Mitre fence • Eccentric clamp • Table widening • Extendable telescopic fence • Longitudinal stop flaps • Support table with roller • Push stick • Independent scoring unit with dedicated motor • Operating tools Features • Powerful main drive motor (5.5 kW) with high torque, optimized for top cutting performance • Easy-running double roller carriage with central and end-position locking for precise cuts • Max. saw blade diameter 400 mm for cutting heights up to 125 mm • Support table with roller for easier handling of large workpieces • Fold-down rip fence with micrometric fine adjustment (advantage for large panels) • Standard independently driven scoring unit (motor power 0.75 kW) • Rigid saw assembly with double-sided guided tilt elements in cast iron • Table widening for cutting widths up to 1300 mm included in delivery • All aluminium components (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously tiltable from 90° to 45°

Kondisi: baru, Tahun pembuatan: 2025, Robust steel and grey cast iron construction With fixed milling spindle 3 spindle speeds from 3500 to 10,000 rpm Milling spindle with forward and reverse rotation Large, oversized milling unit made of grey cast iron, mounted directly to the table With extraction hood beneath the worktable for improved dust extraction Solid and precise cast iron table Quick and effortless speed change Powerful 5.0 kW motor Standard arc milling guard Quality made in Italy Equipment details Grey cast iron milling unit Mounted directly to the milling table Dsdpfxjhp Rcrs Agqjwd Milling spindle is mounted high up with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3500 to 10,000 rpm Powerful motors Equipped with a powerful three-phase motor Milling guard The standard milling guard is factory-equipped for maximum safety with a height-adjustable guide rail and protective sheet Milling fence Precise milling fence with quick adjustment and fine adjustment with scale on the fence jaw Integrated extraction port ensures a clear view Milling table opening A large table opening allows the use of larger panel raising cutters as well as tenoning and slot mortising tools above and below the table Arc milling guard Included as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Weight (net) approx. 240kg Dust extraction connection Extraction port diameter: 2 x 120mm Worktable Worktable length: 1945mm — Table height: 900mm Worktable width: 695mm Setup information Required length: 1945mm — Machine body width/depth: 575mm Required width/depth: 920mm — Working area length: 1600mm Note on space requirement: Dimensions allow for max. travel distances or usable lengths. — Working area width/depth: 1600mm Machine body length: 1000mm — Note on working area: Please add the given working area dimensions to the space requirement to determine the recommended free setting-up area for the machine. Electrical data Mains voltage: 400V — Drive motor output: 5.0kW Mains frequency: 50Hz Milling spindle Usable spindle length: 100mm — Spindle speeds: 3500/7000/10,000 rpm Max. spindle protrusion above table: 130mm — Spindle diameter: 30mm Max. milling tool diameter Max. tool diameter (lowerable): 180mm SCOPE OF DELIVERY Arc milling guard Aluminium fence jaws Table extension left and right Extendable workpiece support