Gergaji ganda

HECHT AG Doppelgehrungssäge DS350

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Additional central support: 1 unit Codpfoxnlgcsx Ag Djrb Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2025, jam operasional: 2 h, Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 400 mm, diameter unit penyikat: 210 mm, panjang total: 1.350 mm, lebar total: 900 mm, tinggi total: 1.540 mm, jenis penyesuaian ketinggian: mekanis, berat keseluruhan: 500 kg, diameter nosel ekstraksi: 100 mm, tinggi benda kerja (maks.): 315 mm, lebar benda kerja (maks.): 400 mm, pl-hu-1 Csdouwdb Ejpfx Ag Dsrb

Kondisi: baru, Tahun pembuatan: 2025, f5d67387 Credpfx Aort H Izeg Djb

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Complete saw line consisting of infeed unit, fully automatic circular saw, and outfeed unit Suitable for a wide range of applications, particularly in the photovoltaic and automotive industries. Infeed unit: Horizontal loading magazine Model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Max. material height corresponds to the saw cutting range, round stock max. diameter 130 mm 3 sliding strips between the belts for additional support Profile length: min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele Model PROFILMA 510 E-SA Saw blade diameter max. 500 mm Continuously variable speed control Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 control with touchscreen Reversal device with 5-fold stroke, up to max. 5,000 mm Electronic material feed 3–1,000 mm (single stroke) Cutting gap extension on both sides Pneumatic removal slide Waste flap after the saw for cut-offs / remnants Cut length depending on profile, from 8 mm Crsdpfxjxvbvvo Ag Dsb Menzel minimum quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust extraction Outfeed: Support table area 1,500 mm x 2,500 mm Pneumatic cross transfer slide

Kondisi: bekas, Working length 4000, 5000 mm Working height 120 mm Pivoting function: yes Rapid DGS 200 Double Mitre Saw ----- with saw blade diameter 420 mm, manual length adjustment with digital length display Perfect dimensional and angular accuracy guaranteed. Credpfexmk Amex Ag Deb We employ precise and efficient motion technology for this purpose: Ball bushing guides for length adjustment, spring-loaded pivoting units for convenient and safe angle adjustment between 45° and 90°. The length and angle adjustment on this double-head mitre saw is manual. Enhanced operator comfort and productivity are achieved with the aid of a digital length display. System Features: ----- - Manual length and angle adjustment - Saw blade Ø 420 mm - Robust welded construction - Ball-bearing linear guides for long service life - Hardened guide shafts - Electronically balanced saw blade flange - Direct drive motor - Pivot axis supported on both sides Digital Length Display: ----- - Digital length display with 30 profile numbers and corresponding corrections - Editing of the 30 profile numbers (name + correction) directly via the display - Corrections are applied according to the saw's angle position (45° and 90°) - Piece counter: If the length display changes by more than 0.1 mm, the count resets to "0" - Stop for short parts: automatic recalculation of length and profile height according to the angular position Application Examples: ----- Window, door, façade, conservatory, insect screen profiles, Partition wall systems, internal sliding door elements - PVC, PVC-Alu - Aluminium - Wood, Wood-Alu Highest precision thanks to double-shaft guidance ----- 420 mm saw blades allow processing a wide range of ALU or PVC profile systems. Simple operation, maximum precision, and reliability make the DGS200 especially attractive for fly screen frame production in small runs. It is also a popular entry-level model for window manufacturing. In wood applications, the saw is used in furniture production and interior fittings for cutting various mouldings. Technical Data ----- Drive: 2 x 2.2 kW three-phase motors, 400 Volt Swivel range: manual 45° to 90° Saw blade: 420 mm diameter Cutting lengths: 4,000 mm, 5,000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders (optional) Length adjustment: manual Air pressure: 7 bar Dimensions: 5200/1200/1500 mm Weight: 800 kg (Technical data as per manufacturer – subject to change without notice!)

Tahun pembuatan: 2004, Kondisi: diremaj di bengkel (bekas), Walter double saw with TRKS 200 feeder Cedpfjh R Tvtsx Ag Djrb cutting height of the double saw: 200 mm, motor power: 40 kW. Chain feeder with controllers and adjustable prism for various diameters. Gearbox for adjustable feed rate.

Kondisi: baik (bekas), Gergaji potong sudut ganda otomatis dengan posisi terkontrol secara numerik untuk pemotongan bingkai, profil kayu, furnitur, kusen jendela kayu, pintu, material plastik, dan lain-lain - Standar CE Data teknis: - Posisioner terkendali secara numerik: memungkinkan penyimpanan daftar pemotongan dan posisi kepala bergerak secara otomatis - Panjang pemotongan: 3500 mm - Diameter pisau: 350 mm, lubang 30 mm - Daya motor per unit: 2,2 kW - RPM: 3000 - Lebar pemotongan: 170 mm Crjdpfsxztydex Ag Dob - Tinggi pemotongan pada 90°: 102 mm - 2 penjepit pneumatik vertikal - Diameter mulut penyedot: 80 mm - Tekanan udara terkompresi: 6-7 bar - Dimensi keseluruhan (mm): 4400 x 1000 x 1500 h - Berat: 600 kg

Tahun pembuatan: 2000, Kondisi: baik (bekas), Daya: 5,5 kW Berat: 2.200 kg Crodjw S Nycjpfx Ag Dob

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Engine power: 2.2 kW Crsdpfxewbpwhj Ag Deb Manual feed of units Blade diameter: 330 mm 3000 rpm Maximum unit spacing: 3300 mm Cutting angle adjustment: -45/+45 degrees Vertical pneumatic clamps Cutting process activated by foot pedal Safety switch Width: 900 mm, Height: 1500 mm

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, ENGLISH_TRANSLATION_DOPPELTE_GLASLEISTENSÄGE_TRF_527_NC_FP_CA_MM _4000_Type_Plate_Description Codpfxey Er Iko Ag Dsrb Double mitre saw for the simultaneous cutting of two glazing beads positioned one above the other. Right saw unit is fixed; adjustment of the left unit to the set cutting length can be read from a digital display. Units are equipped with supports that enable the simultaneous cutting of 2 glazing beads. For cutting larger cross-sections, the upper support can be removed. Upon completion of the cutting process, the pneumatic clamping cylinders automatically swing to the side to facilitate loading and unloading of the machine. STANDARD FEATURES • Fixed right unit • Digital gauge • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, and motor protection switch • Pressure switch • Tool kit • Guards with horizontal, pivotable clamping devices • Two-hand control • Belt drive • Pneumatic unit lift • Central support TECHNICAL DATA • Motor power: 2 x 1.2 kW • Saw blade diameter: Ø 220 mm • Max. cutting height without support: 80 mm • Max. cutting width at 90 degrees: 55 mm • Max. cutting width at 45 degrees: 40 mm • Max. cutting length: 4000 mm • Min. cutting length: 158 mm • Weight: approx. 290 kg • Space required (standard features): approx. 4,500 x 1,000 mm 1 set of 2 mechanical stops for setting up to 4 intermediary angles. Additional central support. 1 set of adapters for rebated profiles 1 set of adapters for rebated profiles as per drawing: - Adapters on the clamping devices to compensate for the profile angle - Shims on the rear stops of the units and the central piece (shown in green in the sketch below) is a chamfered pressure piece that follows the inclined profile and presses it against the shim (drawn in red) on the stop. All information without guarantee.