Mesin press seri kecil, mesin vulkanisir

Hidrobrasil 10 Tonnen Einzelständerpresse

Tahun pembuatan: 2023, Kondisi: seperti baru (mesin pameran), Under-table press Pressing force: 300 kN Press area: 300 x 300 mm Specific pressure: 3.3 N/mm² Opening: 200 mm Heating plate: solid steel heating plate Electrically heated up to 250°C Control: Siemens S7-1200 with 12" touch panel Mechanical safety gate Ijdpfekuz T Uex Aa Nsht Data recording

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) Ihjdpefxyhfjfx Aa Nst - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1990, Pressure: 25 t Outreach: 160 mm Installation height: 500 mm Iodpfxofcw Ape Aa Noht Table dimensions: 650 x 650 mm Ram diameter: 140 mm (round) Stroke: 130 mm Power requirement: 4 kW Weight: 2,000 kg Height: 2,100 mm Width: 1,100 mm Depth: 1,500 mm

Kondisi: bekas, Tahun pembuatan: 2025, tinggi total: 2.100 mm, lebar total: 800 mm, panjang total: 2.200 mm, 20240613-01 Ihedoxb Scwspfx Aa Net

Kondisi: bekas, Tahun pembuatan: 1997, druck-40-t Ihodpfxsvuucke Aa Not

Tahun pembuatan: 2025, jam operasional: 10 h, Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: C1-25sE_1, CrimpOne C1-25sE - Made in Finland Servo-electric Hose Crimping Machine with Spindle Drive Technical Specifications Main Technology: AC servo ball screw Max. Crimping Force: 250 kN Crimping Range: 10 - 54 mm Isdpfx Aajvr Dnko Nsht Max. Hose Size: 1¼ inch Master Die D / L: 84 / 78 mm Servo Motor: 5 kW Repeat Accuracy: 0.01 mm Max. Opening: +100 mm Max. Feed Channel: 45 mm Max. Closing Speed: 80 mm/s Max. Opening Speed: 80 mm/s Max. Crimping Speed: 10 mm/s Length: 1,250 mm Width: 850 mm Height: 2,100 mm Weight: 700 kg Control Unit: TC12 - Omron Touchscreen

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, nomor mesin/kendaraan: NEBR-4397, Here are the technical specifications of the machine on offer: If the press does not exactly match your requirements, you can request an individual quote tailored to your needs with just one click: Contact us for a customised offer. HIDROBRASIL manufactures presses precisely according to your specifications at surprisingly attractive prices! ##### Technical Details Pressure: 15 t Technology Stroke: 160 mm Machine weight: approx. 330 kg Oil tank: 10 l Robust machine frame with solid welded construction, manufactured in accordance with DIN 8651 ##### Additional Information Thanks to durable engineering, low-maintenance and reliable Cylinder with induction hardening and chrome plating Steel quality: structural steel LCG ASTM A36 4 support feet with M30 holes for floor mounting ##### Equipment 1.5 t rotary mandrel attachment, mechanical, with locking mechanism, spline shaft and brake, offering 220 mm travel Hydraulic hand pump with max. 15 t pressure and 160 mm travel, with return spring Throat depth from rear wall to centre of tool holder: 280 mm Assembly table can be swivelled 180 degrees to the right, featuring a 60 mm centre bore, M12 T-slots Clearance height between swivel table and ram/rotary mandrel guide: 450 mm Clearance height up to the additional table (insertable): 650 and 800 mm Additional table with central bore, 60 mm (insertable), M12 T-slots, size 270 x 200 mm Base height with two compartments for additional table: 750 mm On the cylinder, a hardened pressure plate with a diameter 10 mm larger than the cylinder Tool holder M30 in the cylinder head Ihedpfofhcc Ijx Aa Nst Pump lever operated from top to bottom Oil tank for 10 l hydraulic oil AW 46 Machine frame finished in blue, RAL 5012, textured paint Attachment parts finished in anthracite, RAL 7021 Hydraulic single-column combination press as special machine, 15 tonnes, manual operation (C-frame press, hydraulic press) ##### Are you looking for a customised machine? Contact us for a tailored quote. Our hydraulic presses are built in accordance with German Machinery Directives as well as European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety requirements. Furthermore, our presses exceed Canadian and European safety standards, as they are fully compliant with the national Brazilian safety directive NR 12, which is based on the former. Our major strengths are special-purpose machine manufacturing and press automation. We supply tailor-made hydraulic presses, press brakes, and guillotine shears at surprisingly low prices. For the hydraulics of our presses, we primarily use components from leading European manufacturers.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 2.400 mm, lebar total: 1.500 mm, panjang total: 2.400 mm, gaya penekanan: 20 t, berat keseluruhan: 2.000 kg, jenis arus masuk: tiga fasa, lebar kabinet kontrol: 80 mm, tegangan masuk: 400 V, panjang kabinet kontrol: 60 mm, daya: 22 kW (29,91 hp), arus masuk: 32 A, suhu lingkungan (min.): 10 °C, suhu lingkungan (maks.): 40 °C, jenis penyesuaian ketinggian: hidrolik, Perlengkapan: dokumentasi / manual, If the press does not exactly meet your requirements, simply request a customized offer tailored to your specifications with one click: Contact us for a custom quote HIDROBRASIL manufactures presses exactly to your requirements at surprisingly affordable prices! ##### 20 T Tablet Press, Single Column Press, C-Frame Press, Manual Loading Press Machine type: Hydraulic C-Frame Press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical Specifications: - Pressing force: max. 20 tons (at 250 bar) - Maximum breakaway force: 20 kN - Pressure build-up time: max. 2 seconds (with closed die, steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Minimum hall height: 3,500 mm - Parallelism deviation: +/- 0.1 mm at 20°C - Deflection: 0.3 mm/m (at max. closing force, 70% table coverage) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10–5 mm/s - Noise level: max. 78 dB(A) measured at 15 m height at the control panel according to DIN 45635-T16-KL3 Hydraulics: - Number of press cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during pressing stroke: +/- 5 bar - Main pump: gear pump approx. 10 L/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C Electrics: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total power connection: approx. 6 kW Control cabinet: - Protection class: IP 54 - Spare capacity: approx. 20% - Cooling: none - Interior lighting: none - Operating mode switch: lockable Equipment: - Light curtain: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors Ihsdpjtv Ewdofx Aa Njt - Pressure adjustment: 5 T to 20 T, adjustable via rotary knob - Two-hand control: standard, optional foot control available - Table plate: designed as a tray with a 50 mm high rim and side drain - Control cabinet: mounted on the right side of the press, protection class IP 54 Function and Operation: - Activation: via main switch - Pressure adjustment: via rotary knob - Cycle activation: via two-hand control or optional foot pedal - Safety features: according to EU standards and accident prevention regulations (UVV) Special Features: - Press tool components: upper tool with 8 press rams, 3-part lower tool - Press cycle: capable of producing 8–12 pressed parts per minute - Hydraulic unit: fully removable for maintenance Service and Warranty: - Monitoring and inspection: according to DIN ISO 16092-3-2018 - Customer service: based in Waibstadt or Gelsenkirchen - Documentation: compliant with CE standards --- Looking for a tailor-made machine? Contact us for a customized quotation.

Tahun pembuatan: 1985, Kondisi: hampir baru (bekas), Wanzke Hydraulic High-Speed Press SP/F12 -WKG 499- Offered here is a hydraulic high-speed press manufactured by Wanzke. This press is in like-new condition! Technical data: Manufacturer: Wanzke Model: SP/F 12 Pressing force: 120 kN Return force: 17.8 kN Iedpfx Aashgiyio Nsht Overrun time: 0.028 sec Year of manufacture: 1985 Main drive: 1.5 kW / 1.5 kW Mains voltage: 380V 50Hz Control voltage: 220V 50Hz Overrun distance: 2.8 mm Safety clearance: 4 mm Accessories: GM1 Decoiler

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1999, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red / RAL7016 anthracite grey Ihsdpjub R R Sjfx Aa Nst Machine no.: 343006 with warranty Geometric acceptance with inspection protocol Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 mm (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system ISO 7388 - Central lubrication, electric - Coolant system - Splash guard cabin, electrically secured - Control panel on base - Operating manual Used as seen The machine is technically in accordance with the standard of its year of construction.